Problems installing newer xalan distribution (jdk 1.4.1)
Hi,
i would like to install xalan 2.5.D1 with a jdk-1.4.1.
As far as i've understood the docs, xalan ist shipped with
the jdk and i have to use the 'endorsed tecnoligy' to
overirde the jars.
So i put the xalan.jar under $JAVA_HOME/lib/endorsed/xalan.jar.
But if i run 'java org.apache.xalan.xsl.EnvironmentCheck'
I get "version.xalan2=Xalan;Java;Xalan Java 2.2.D11;".
What went wrong ?
So i put the xalan.jar under
$JAVA_HOME/lib/endorsed/xalan.jar.^^^^
Well it should be:
$JAVA_HOME/jre/lib/endorsed/xalan.jar.
^^^
Similar Messages
-
I am having problems installing new software for my ipod
I keep getting a message that the network has timed out.
I have tried two different computers and networks what else can I do?Try temporarily disabling your firewall and anti virus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/ -
Problem installing new email and calendar update o...
hello nokia, i have problem installing new email and calendar update version 3.6 (5) in nokia 701 fp2...i have download it when it appears in my software update and after download installation start and i waited for the installation to finish up but the phone switch off its self ...phone starts again n again i try to install but the phone switchng of itself ...i try many times but it didn't work...so need help guyz love nokia thnkz
Confirmed!
It's an anti-virus related issue. First tried to disable only protection, firewall, etc., but it did not work fine.
As suggested, so I deleted KMS (but keeping the application settings and objects in quarantine), and was finally able to complete the installation of the update.Then installed again KMS and everything still works fine.
No experience of Wi-Fi issues.
Nokia 700
113.010.1506.C00.01 - FP2 -
I have a Nokia N86 8MP
I have a problem installing new apps to the phone
Here is the process i follow
1. Send app from OVI store to my phone - Successfully
2 . Text message received containing download link
3. Open link - Link opens successfully
4. Click on download button
Now this is were the problems start
Nothing downloads and the screen just goes back to the text LINK
Any help would be great
Regards
DaveNow sorted -
-
Having real problems installing new software I have been on the updating I cloud screen now for over hours has anyone else experienced this?
Glad I am not the only one its frustrating
-
Having problems installing Canon MG3170. Anyone have any solutions? Here is what I have tried:-
-Installed from provided Canon disk, firstly with wireless connection, then using USB connection. Printer could not be added because the Macbook returns that the software is not available from Apple for both types of connections.
-Uninstalled software from the Canon disk, checked for software updates, then downloaded drivers (printer and scanner) from Canon Website. Again tried to install using wireless connection then USB connecton. Printer could not be added because Macbook returns that the software is not available from Apple
-Uninstalled drivers downloaded direct from Canon Website and plugged printer into Macbook using USB, Macbook recognised the printer and searched for the software, again Macbook returns that hte software is not available from Apple.
Help!nrg adjusta,
Sorry it took me a while to repsond, Ive been pretty busy with school and work. But for my hard drive problem, I did hours and hours of more research and trying countless ways of installing and tweaking things in my laptop and absolutely nothing worked that I could do. It was very irritating because I felt like I was so close to fixing it and I was just missing a step somewhere. Though It still boggles me why the disk utility shows a different capacity for the HD's. One thing I'm going to try next is replacing the hard drive cable that goes from the internal HD to the macbook. I read somewhere that sometimes those can go bad over time, and also if you get a new, modern hard drive, sometimes the old cable (for some odd reason) might not be compatible with the new HD. So i want to test it out for myself to see it that is the actual culprit.
http://www.ifixit.com/MacBook-Parts/MacBook-Hard-Drive-Cable/IF186-018
Once I get the cable and install it I'll let you know the results and if it helped at all.
Have you made any progress on your hard drive at all? If worst comes worst for you, you can probably get a SATA to USB cable and try to reformat it that way (this is the way that worked for me, but the only problem was it wouldn't be recognized when I installed it internally. Thats why i want to try getting the new cable), and if it still wont recognize it after that, you can just leave it outside of your mac, and just boot from that. The only thing that ***** about that is you have this big hard drive handing off the side of your mac when ever you need to use it.
Heres a link for a SATA to USB. this one is good because is compact and protects the HD from damage and most static electricity.
http://www.thinkgeek.com/computing/usb-gadgets/e6d9/?srp=3
Im still continuing my search for the answer and once i find it (if ever!) I'll post it. -
Problems installing new flash player
im having problems installing the latest flash player. the
first time i tried my internet protector blocked me and i pressed
deny by mistake, i restarted my computor and tried again but this
time nothing happens, and thats it, i cant download the
installations program.
can someone help me?I'm having the same problem. I go to update my Adobe Flash
Player @ the web address:
http://www.adobe.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash
Then I click on the Download and Install button, and it takes
me to:
http://www.adobe.com/shockwave/download/flash/trigger/en/1/index.html
which ends up taking me back to where I started.
So, I cannot download the new flashplayer either. That makes
YouTube off-limits, which sucks. -
I am new to the iMac and I have no idea how to install new fonts.
Can anyone advise me?
Any help greatly appreciated.See Font Management in OS X.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2 -
Problems installing new hard drive
Hi
I have a HP Pavilion DV6000 (or according the the bios DV6700) and the original hard drive is on the way out, as the machine locks up after a short while of being logged on. I ran the hard drive diagnostics from the bios and it confirmed that there was a fault with the hard drive and i should replace it. I stupidly never made any recovery disks and as the machine locks up i cannot make any recovery disks, so im going to have to do a clean install of Vista from a CD i got from work, and thats where ive hit a problem!
I got a new 320gb SATA drive and booted up the Vista installation but it gets stuck on "unpacking files" then eventually gives up and says "Windows cannot install required files. Make sure all files required for installation are available. Error code 0x8007045d". Ive tried a couple of different discs for Vista but it still comes up with the same message. So i thought if i put XP on it, I could then maybe upgrade to Vista..... No luck there as i got a similar message when trying to put XP on. So i went out and got another hard drive but im still having the same problems!
Has anyone had problems with installing a new hard drive in a Pavilion laptop? Or has anyone got a suggestion how i can get Vista on to a new hard drive? Its really getting annoying now as its something so simple normally!
Thanks in advanceSimilar problem. Created an image on a new WD 320gb SATA HDD, then put it in my 9000 Pavillion. All worked great, except when I then tried to upgrade to WIN7 from XP, I got the same error. Turned off all programs, used MSCONFIG to stop everything, but it kept stopping when unpacking the files. Same
0x8007045d error. Tried to put the WIN7 on a mem stick to then move to the HP laptop, but everything copied except a boot.wim file in one of the subdirectories. So I don't think that will work. Couldn't find anything that might help at the Microsoft site. -
Problem installing new Discoverer Catalog AS 10gR2 with Oracle 10g 10.1.0.4
Hello everybody, I'm having the following problems
I have successfully installed
1. Oracle 10g (10.1.0.4) with all appropriate patches (successfully up and running and works with Analytic Warehouse Manager 10g R1)
2. Oracle Application Server 10g R2 (10.1.0.2) (Infrastructure and Application Server mid tiers both successfully up and running)
3. Oracle Business Intelligence 10g (10.1.0.2)
(successfully up and running)
Whilst trying to install a discover catalog into my GLOBAL tablespace on Oracle10g 10.1.0.4 instance, I encountered the following error
500 Internal Server Error
java.lang.InterruptedException: sleep interrupted
at java.lang.Thread.sleep(Native Method)
atoracle.disco.oem.controller.DiscoEventHandler.handleEvent(DiscoEventHandler.java:104)
atoracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown
Source)
atoracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown
Source)
atoracle.cabo.servlet.event.BasePageFlowEngine.handleRequest(Unknown
Source)
atoracle.cabo.servlet.AbstractPageBroker.handleRequest(Unknown
Source)
atoracle.cabo.servlet.ui.BaseUIPageBroker.handleRequest(Unknown
Source)
atoracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown
Source)
atoracle.cabo.servlet.UIXServlet.doGet(Unknown
Source)
atoracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:347)
atoracle.sysman.eml.app.Console.doGet(Console.java:271)
atavax.servlet.http.HttpServlet.service(HttpServlet.java:740)
atjavax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atcom.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:823)
atcom.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
atcom.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
atcom.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
atcom.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
atcom.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
Thank you for your helpHi Amer,
For OLAP access in 10g database you must apply the 10.1.0.4 patchset that can be downloaded from Metalink. This provides many new features for the OLAP option such as improved sparsity management and paritioned cubes to name a few of the new features.
Once you have this patchset installed you will then be able to use Discoverer to access your dimensions and cubes.
Hope this helps
Business Intelligence Product Management Team
Oracle Corporation -
Problems installing new hard drive - pt. 2
Hi there,
I have been using a G4 for years for my music (Pro Tools). I had the standard 29GB hard drive, and I had added a second 40GB drive, and those worked well for me for years.
A few weeks ago, the system started acting up, and it seemed like the 29GB hard drive was shot. So, I got a new one (320GB) and installed it, setting it as Master and keeping the old 40GB one as Slave.
I tried to install both OS9 and OSX on the new drive, but had problems (as chronicled in this previous thread: http://discussions.apple.com/thread.jspa?threadID=2478863&start=0&tstart=0).
After trying a number of things, I finally got 10.3 loaded and seemingly working. Then, I realized my old Pro Tools disc needed OS9/Classic to load, so I looked around for info on if I could load OS9 without disturbing my 10.3. I tried booting to the old OS9 disc -- I didn't actually do anything, like initialize, reinstall, or anything, just looked around to see if it was possible -- and now the 10.3 isn't working either.
Neither the OSX installer, the OSX Disk Utility, or the OS9 Disk Utility seems to "see" the new drive now.
Any thoughts/theories/suggestions on what it might be? Just before the 10.3 installed successfully, I had opened the computer and pressed the IDE cable connections down, just to make sure they were secure. I don't know if that did anything, but it might have.
Now that I'm having problems again, I have of course checked those IDE cable connections again, but the computer still doesn't "see" the drive.
I will remain calm...Some earlier PowerPC Macs need to have OS X installed on the first 8 GB of the HDD. Mac OS X: Disk Appears Dimmed (or "Grayed Out") in the Installer. I am not sure if that is the case with your computer, but it might be a factor.
On the other hand, if you previously had both OS 9 and OS X installed on the HDD without an 8 GB partition the issue may be elsewhere.
Try this:
Format and Install OS 9
This process will completely erase everything on your Hard Disk Drive. Be sure to Backup your User Folder and all third party apps you can't afford to lose
• Boot from your OS 9 install CD holding down C key.
• Go to Drive Setup and reformat your drive as Mac OS Extended (HFS+)
• Reinstall OS 9
• Update to 9.2.2: Mac OS 9: Available Updates
• Update your firmware
Install Panther OS X 10.3.9
• Boot from the 10.3.x install CD 1
• Go to Installer Menu and open Disk Utility
• (Optional)Go to File menu and Repair OS 9 Permissions!
• Quit Disk Utility.
• Launch Installer
• Select Destination disk for installation
• Click Options
• Select Installation Option Archive and Install
• (Optional) Preserve Users and Network Settings
• Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
• Check box to install BSD Subsystems (Panther & earlier).
• Install Mac OS X 10.3.x
• Restart and Repair permissions (Applications > Utilities > Disk Utility)!
• Download and apply the 10.3.9 Combo Update
• Restart and Repair Disk Permissions as previously!
• Run Software Update and apply all updates available
• Repair Disk Permissions (Applications > Utilities > Disk Utility)!
cornelius -
Problem: installed new hard drive but can´t boot from leopard dvd
So I just installed a new hard drive in my ibook G4. At first I started up the computer using the leopard DVD I had purchased. Got to Disk Utility and after a few seconds in the spin wheel came up and froze. So, I shut the computer down and when I tried to boot it again from the DVD I wouldn´t even reach the apple screen. Tried it a few times unsuccessfully.
As an alternative I just tried booting the comptuer using the original CD and it did read it.
I am currently at the installer page but I am concern about installing the old CD as I really would like to run the leopard dvd 10.5.
Is it that my ibook g4 can´t be booted from leopard dvd?
Please advise. thanks!!OK, so I decided to leave my computer resting all night and give it a new try this morning.
This morning I was able to boot from the Leopard DVD, so I don´t really think it is a problem with my superdrive. Started to format at 32 minutes to complete. Then towards the 10th minute the spinning wheel appeared, I heard the fan running, then it stopped and then I heard the superdrive making some reading noises. Then all noises stopped and now the spinning wheel continues..not sure what to do now.
In the meantime, I wanted to share also another problem that I´ve been having for quite some time which I don´t know if it is related to my current problem. It is with the computer power:
- I´ve been experiecing load surges that take my computer from 100% to 1 or 0% and then goes to sleep or shuts down. The same thing happens when I am charging the computer.. it starts charging and showing 2 or 3% charge and then jacks up to 100% in minutes.
- My computer also makes like a slight humming noise sometimes when the ring around the power cable is in orange color, so I move it around until it stops. When I do that sometimes it goes from orange to green eventhough it is not fully charged. There has been times that under green it appears to be charging (battery charging icon on desktop shows up), and other sometimes like right now when it is in green color and the battery icon on the desktop says ´99%´. Weird enough, once I get the cable in a certain position it enables the battery to charge, if I keep it without moving it, the load surges disappear (at least for some days).
Should I try resetting the PMU? I´ve not done it because I don´t know what consequences it may have.
NOTE: When I bought the computer I never calibrated my battery because I was (and still are) clueless when comes to computer technicalities. I tried using a different power adapter and get the sample problem.
Below is the information I get from coconut battery:
My battery is in its 256 load-cycle. current battery capacity 58512mAh (original battery capacity: 4400 mAh).
The last system profiler I was able to pull shows:
Battery Information:
Charge Information:
Charge remaining (mAh): 58320
Charging: No
Full charge capacity (mAh): 58512
Health Information:
Cycle count: 256
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 16250
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 15
Dynamic Power Step: Yes
Reduce Processor Speed: No
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Wake On Modem Ring: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 5
Dynamic Power Step: No
Reduce Processor Speed: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On Modem Ring: No
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
Clamshell Closed: No
UPS Installed: No
AC Charger Information:
AC Charger (Watts): 26
Connected: Yes
Charging: No
Any help is greatly appreciated.
Thanks a bunch!!! -
Problems installing newer iTunes version
So, today I went to future shop and purchased a beautiful new ipod touch. I came home and plugged it into my computer and it beeped a couple times and a screen showing the end of the USB cord and the iTunes icon logo thing showed up. Having no idea what it meant, I wandered around the apple site trying to find answers. I've decided I don't have the proper version of iTunes, but everytime i try to download a new version, Internet Explorer just closes on me. I know this must be a problem with my computer, but I was just wondering if maybe there was a way around this? Perhaps there is a way to download iTunes 7.6 without using the internet? HELP ME PLEASE!
No go =[ IE just terminates the download of the update so I'm a bit wary of uninstalling it to try and reinstall it... Actually, I'm not really sure how that would work. A bit off topic, but how would one browse the internet to reinstall IE if IE wasn't installed onto one's computer? =S I'm so hopeless.
-
HT5055 Problem installing new Lion update for Java
When I launch JavaForOSX.dmg, it says: "There maybe a problem with this disk image. Are you sure you want to open it? Opening this disk image may make your computer less secure or cause problems." I have downloaded the lastest Java update for Lion 4 times and I always get this message! I have never received a similar message in the past. I downloaded the Snow Leopard file and sucessfully updated my wife's computer with no problems. Is the Apple file bad, or am I doing something wrong.
I'm running Mac OS X 10.7.3 on a Mac mini (2.5 GHz Intel Core i5).
Software Update does not offer me Java for OS X Lion 2012-002
Preferences->Installed Software does not show any Java updates installed.
When I download from http://support.apple.com/kb/DL1515 instead of a 66.9MB file I get a 63.8MB file (every time) and it gives me the error "There may be a problem with this disk image. Are you sure you want to open it?" when I open the DMG.
I think Apple needs to provide a new disk image for this patch. -
Problem installing new software (stuffit, haven't tried others yet)
Hi!
I'm the happy owner of a brand new (the laptop pro, 17") but I have a little problem:
I wanted to install Stuffit (I downloaded it from the Internet), but when I try to drag it to the Applications folder, it says "the operation cannot be completed because you do not have sufficient privileges for some of the items".
I don't understand, because the computer is mine, I'm the only user, and I've checked, I have read & right access to the folders.
Could someone tell me what's wrong or how I can get to finish installing this software?
(I want to buy some softwares online, but what's the pointif I can't install them!)
Thanks!yes, I need it, to decompress sit files.
I tried again, with a game, a dmg file, but it won't let me paste the installed file in the applications folder (just like the stuffit, who was originally a dmg file)
I don't get it!
Maybe you are looking for
-
Add new columns under schedulines tab in SO
Hi Gurus, Can we add new columns in SO schedulines tab?Example between Delivery Date and Order qty. I know that changes in standard programs are not advisable, but I'm not sure if it is actually applicable using user exists or others. Thank you.
-
Call transaction 'VL33N' on click of Inbound delivery number in ALV List.
Hi, My ALV output is having Inbound delivery number. If user clicks on one of the Inbound delivery it has to call transaction VL33N and display the user selected document. Code: WHEN '&IC1'. IF rs_selfield-fieldname = 'VBELN'. READ TABLE gt_f
-
I bought Steve brookstien album heart and soul but I can't find anywhere or on iTunes
I bought a Steve brookstien album heart and soul 4 years ago but I can't find it on iTunes anymore?
-
Login has been temporarily disabled due to too many unsuccessful login attempts.
Hello, Does anyone know in how long after recieving the message "Login has been temporarily disabled due to too many unsuccessful login attempts. Please try again later." I will be able to login? Regards, Alex Solved! Go to Solution.
-
Using the Standard Template Library with 5.0 using 4.2 compatibility mode
Has anyone used the Standard Template Library with the 5.0 release of the complier using the -compat=4 flag ?