Problems installing on Corel Linux
This is my first time trying to install Oracle 8i.I know Corel isn't as common as say RH but I hope someone will have a clue what to do.
I am running the orainst file in the orainst directory and it starts fine until I get to a point where it says "please run oratab.sh" or something like that, but when I log on as root and run oratab.sh it gives me an error "file not found" Anyone have an idea how to get by this?
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Steve Hare ([email protected]):
This is my first time trying to install Oracle 8i.I know Corel isn't as common as say RH but I hope someone will have a clue what to do.
I am running the orainst file in the orainst directory and it starts fine until I get to a point where it says "please run oratab.sh" or something like that, but when I log on as root and run oratab.sh it gives me an error "file not found" Anyone have an idea how to get by this? <HR></BLOCKQUOTE>
1. when your logged on as root are you in the oracle home directory.
2. how did you kick off oratab.sh? if you tried ./oratab.sh it will work.
steven
null
Similar Messages
-
Problem Installing Oracle8i on Linux
Hello..
When i try to install Oracle 8i in my RedHat Linux 6.1 , i am getting an error
Error in CreateOUIProcess():-1
: Bad Address.
at the start itself..
Any one knows what is problem??
nullThis is a known problem.
Firstly, make sure that you're running the right version of the JVM. I
don't know what Oracle do with their software, but it's very dependent
on the version you use.
Secondly, it might help if, instead of running runInstaller from the
root of the CD, you move into install/linux and run the runInst.sh
shell script instead.
This problem seems more common on RedHat 6.1 than 6.0 and could be
something to do with a newer C library.
I've also heard reports that if you have the wrong version of Gnome
you might get this problem. Upgrade or switch to another environment
such as KDE or Fvwm2.
Hope this help you!
null -
Anyone install 8i on Corel Linux
I would like to try Oracle8i on Corel Linux. Has anyone tried this. If so what were some of the issues that I should be concerned with.
Just discovered one more thing:
After the installation is done, you may notice that sqlplus is not working (as well as a bunch of other things). That's because there are a number of libraries missing and linking process failed.
To fix this problem I did two things:
1. I had to go back into the Java installer and install everything that there was available. In fact, I went back into installer twice (because of the way it works). The third window during the installation (called "Available Products") has three radio buttons. You go through the first one during initial install, then come back twice for the other two (click everything that's unchecked each time around). That way you end up with all the libraries possible installed.
2. I got the 8.1.5.0.2 patch from technet at http://technet.oracle.com/tech/linux/
Followed the instructions in README. After the patch is done, it asks you to check the log files and relink Oracle Intelligent Agent. Here's how I did the relinking part:
cd $ORACLE_HOME/network/lib
gmake -f ins_oemagent.mk agent
If you don't have gmake, create a link like this:
cd /usr/bin
ln -s make gmake
After all that I ended up with updated and working sqlplus, svrmgrl, and Java utilities like netasst, netec (although the last two crash when you try to test a connection). The database is accessible through svrmgrl and sqlplus, and from outside the box I use sqlplus and Net8 clients running on NT.
Sergey -
Problems to install Oracle9i on Linux RH 7.1
Error message appeared during installation process.
"Error in involing target install of makefile
/disk01/app/oracle/products/9.0.1/plsql/lib/ins_plsql.mk"
Does anybody know what to do?Try the instruction on this URL
http://www.e-gineer.com/instructions/install-oracle9i-on-
linux.phtml
The problem may be coming from the binutils verson imcompatible. -
NW04s Linux Trial : problem installing IBM JDK Fedora Core 6
Hi,
I'm trying to install the NW04S Linux Preview on a Fedora Core 6 distribution and I'm encountering a problem with the IBM JDK 1.4.2 installation.
I've downloaded the RPM package from IBM (IBMJava2-AMD64-142-SDK-1.4.2-7.0.x86_64.rpm
), installed it as root but when I try to invoke the virtual machine (java) or the compiler (javac), I got the following error :
libjvm.so preloadLibrary: /libj9vm22.so: cannot open shared object file: No such file or directory
libjvm.so failed to load: j9vm22
Has anyone tried to install the Linux Preview on Fedora and encountered the same problem. It might be connected to some sort of the linux dynamic linker/loader (ld.so) or versions of librairies.
I'm really lost here and I won't be able to start the installation without a working virtual machine.
ThanksI have double checked the link provided to the IBM JDK in the Linux Trial and it seems I had the wrong version. I've downloaded IBMJava2-AMD64-142-SDK-1.4.2-7.0.x86_64.rpm (1.4.2-7) and the special version for SAP is the IBMJava2-AMD64-142-SDK-1.4.2-2.0.x86_64.rpm (1.4.2-2).
I have installed it : rpm -ivh IBMJava2-AMD64-142-SDK-1.4.2-2.0.x86_64.rpm
I have installed it and activated it as the default JVM using alternatives command :
alternatives --install /usr/bin/java java /opt/IBMJava2-amd64-142/bin/java 2
alternatives --config java
I now have a different error :
[root@macpro ~]# java
JVM not found: libjvm.so - libjvm.so
What could have I done wrong ?
Thanks for you help -
Problem installing language pack manually under Linux
I had downloaded Asian language pack to be install under Ubuntu Linux. When ran the installer script using sudo I been prompted to enter the path where Adobe Reader was installed.
The problem seems to accept path name that have the word "acroread" only as the default option was under /opt path. My installation was under /usr/lib32/Acrobat/Reader8/bin and the installer script does not recognize that.
Help needed here. ThanksHi,
If you used the standard installation for reader, the path should have been /usr/lib32/Adobe/Reader8/bin and not /usr/lib32/Acrobat/Reader8/bin. Could you confirm how you performed the installation?
The solution is to uninstall and re-install the reader using the standard location. We highly recommend that you install under /opt if it's a system-wide installation. Installing under /usr/lib32 seems strange given that the reader consists of more than just libraries.
If that's not possible, you can fix it by tweaking the INSTALL script that is part of the language pack installer. Change line 198:
from:
198 if [ ! -d "$dir/Adobe/Reader8/Reader" -o ! -d "$dir/Adobe/Reader8/Resource" ]
to:
198 if [ ! -d "$dir/Acrobat/Reader8/Reader" -o ! -d "$dir/Acrobat/Reader8/Resource" ]
and specify /usr/lib32 as the path of installation when prompted.
Let us know how you progress.
Gaurav -
I'm having problems installing disk 2 of oracle 9iAS linux edition
I'm having problems installing disk 2 of oracle 9ias linux edition is thier anyone else having this same problem
Is it original media? The first installation disk set i received from oracle had a bad disk 2. Once I received the new set, everything was fine. You may have bad media as well.
-
Problems installing 10g on Suse Linux (Failed dependencies: libaio)
I am having problems installing Oracle 10g on a Suse Linux Operating system. I get the following error message.
# rpm -ivh oracle-xe-10.2.0.1-0.1.i386.rpm
error: Failed dependencies:
libaio >= 0.3.96 is needed by oracle-xe-10.2.0.1-0.1
Can anyone help me with this?
Message was edited by:
user473930Please also read the install documentation. This has been noted as a requirement for oracle-xe (you need one more lib ;) ) This also helps you setup your DB, etc, etc.
-
Problems Installing Designer 6.0 over Oracle 8i (Linux SUSE 8.0)
I have problems installing Designer 6.0 over Oracle 8i (Linux SUSE 8.0). When I try to create the repository the installation hang up. I try over Oracle 8i (WIndows 2000) and the problems remain.
Please any body can help?
Is it possible to install Designer 6i and generate forms 6.0 (I mean for using Developer 6.0 (NOT 6i))?
Best regards,
JAGCMarcel,
I had the same problem. Oracle gives as an answer that Designer 6.0 is not supported against 8.1.7. In the specified package a statement is issued which is a problem for 8.1.7. I changed that package and now it works fine.
Comment as below and replace with the delete statement, then it compiles fines.
I don't know if any problem can occur after that, but a Migration from a 1.3.2 repository to 6i works fine through this repository. Hope this helps.
Kind Regards
Jan Boersma
Email: [email protected]
see here:
-- Remove Reserved Names entry and comment
-- delete from sdd_reserved_names
-- where (rn_res_name, rn_type) in ((upper(view_name), 'VIEW')
-- ,(upper(pack_name), 'PACKAGE')
-- ,(upper(pack_name), 'PACKAGE BODY')
-- ,(upper(app_view_name), 'VIEW BODY'));
delete from sdd_reserved_names
where ((rn_res_name = UPPER(view_name) AND rn_type = 'VIEW') OR
(rn_res_name = UPPER(pack_name) AND rn_type = 'PACKAGE') OR
(rn_res_name = UPPER(pack_name) AND rn_type = 'PACKAGE BODY') OR
(rn_res_name = UPPER(app_view_name) AND rn_type = 'VIEW BODY'));
null -
Problem installing Oracle 9.2 on RedHat Linux 7.1 and 9.0
Hi everyone,
As the subject line says, I tried installing Oracle 9.2 on
RedHat Linux 7.1 and 9.0, strictly following instructions
written by Werner Puschitz
(http://www.puschitz.com/InstallingOracle9i.shtml). Both
attempts failed with identical symptoms:
- the installer asks for Disk 2
- after the disk is inserted, it hangs. It turns out that
kernel is writing messages similar to these in
/var/log/messages:
Jun 16 02:45:19 boston kernel: 16:00: rw=0, want=317696, limit=149920
Jun 16 02:45:19 boston kernel: attempt to access beyond end of device
Unless interrupted, this continues until the /tmp filesystem gets full.
Has anyone experienced this? I haven't been able to find
an explanation so far.
Any help would be much appreciated.
Regards,
Ljubomir ButurovicProviding a thread-bare configuration of your machine on which you are trying to install Oracle on Linux (and mind you - which kernel/distro, coz that's important) would definitely help you elicit more responses to your messages.
-
Problem installing collaboration suite on linux
hi
im trying to install ocs on linux redhat es 3.0
after installing the infrastructure it goes ok
while installing the storage and database creation
hangs at "running custom scripts" any body a clue
note that it is a single box installationYou need to have:
- Ssh running on the remote server
- An ssh client on your local PC (e.g. PUTTY, it's a freeware), capable to tunnel and forward X traffic
- An X client running on your local PC
Then:
- On the server, configure X to accept connections from your PC:
export DISPLAY=your_ip_address:0
- Then, on the server, you have to enable your PC to use X but I can't remember the command.... will search for it and update the thread
- Configure and activate the local X client on your PC
- Configure PUTTY to forward X traffic. Connect via ssh logging in normally to the remote machine. Just leave the session open (maybe it's a good idea to remove any timeouts parameters). The SSH tunnel is now built, and the X traffic should be OK
- Test the connection: if you type "xclock" in the SSH window, a nice little analogic clock will appear on your PC desktop (if everything is OK).
- If the clock appears.... Well, go on with your remote installation! :-)
Bye,
Roberto -
Yast installation problem on Oracle Enterprise Linux Rel 5 Upd 2
Hi,
I installed Oracle Enterprise Linux Rel 5 Upd 2 on a new server (Intel 64 bit) with the downloads from oracle
(Enterprise-R5-U2-Server-x86_64-disc1.iso till Enterprise-R5-U2-Server-x86_64-disc6.iso).
Then I wanted to install Yast for administering my machine and downloaded yast_el5_x86_64.tar, again from Oracle. Running the Yast install routine it required the perl-Digest-SHA package. I downloaded that from Oracle ULN and installed it.
Now, running the Yast install routine again, I get a bunch of warnings and errors about failed dependencies and NOKEY's.
Here I copied a part of it:
warning: liby2util-2.13.8-0.12.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: blocxx-1.0.0-17.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: libxcrypt-2.4-12.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: testutf8-1.0-1.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-core-2.13.39-0.3.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: hwinfo-13.57-2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-hardware-detection-2.13.7-0.9.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: libzypp-2.15.10-0.4.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies
+ libboost_filesystem.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
+ libboost_regex.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
warning: yast2-pkg-bindings-2.13.117-0.13.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+ libzypp >= 2.4.0 is needed by yast2-pkg-bindings-2.13.117-0.13.x86_64+
+ libzypp.so.215()(64bit) is needed by yast2-pkg-bindings-2.13.117-0.13.x86_64+
warning: yast2-2.13.104-1.0.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+ yast2-pkg-bindings >= 2.13.111 is needed by yast2-2.13.104-1.0.x86_64+
warning: yast2-network-2.13.98-0.7.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+ yast2 >= 2.13.90 is needed by yast2-network-2.13.98-0.7.x86_64+
warning: perl-Parse-RecDescent-1.80-259.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: perl-gettext-1.05-13.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: perl-X500-DN-0.28-133.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-pam-2.13.5-0.11.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+ yast2 is needed by yast2-pam-2.13.5-0.11.noarch+
warning: yast2-mail-aliases-2.13.8-0.11.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+ libzypp.so.215()(64bit) is needed by yast2-perl-bindings-2.13.11-0.17.x86_64+
+ yast2 is needed by yast2-security-2.13.7-0.11.noarch+
+ yast2-pam is needed by yast2-security-2.13.7-0.11.noarch+
+ yast2 is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+ yast2-network is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+ yast2-pam >= 2.13.5 is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+ yast2 >= 2.13.70 is needed by yast2-country-2.13.52-0.9.x86_64+
+ yast2 >= 2.13.85 is needed by yast2-installation-2.13.192-0.4.noarch+
+ yast2-network is needed by yast2-installation-2.13.192-0.4.noarch+
+ yast2-pkg-bindings >= 2.13.101 is needed by yast2-installation-2.13.192-0.4.noarch+
+ yast2 is needed by yast2-users-2.13.55-0.4.x86_64+
+ yast2-pam is needed by yast2-users-2.13.55-0.4.x86_64+
What's wrong here and what is to do?
I only installed packages from Oracle on a newly installed machine. And I didn't find documentation regarding these problems.
Any help would be greatly appreciated,
Rogererror: Failed dependencies
+ libboost_filesystem.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
+ libboost_regex.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+As error message clearly states you need to install additional OS packages (included in installation media or in online repository) to solve the dependencies. -
Problem with installation on LINUX
Hi,
i´m trying install jdev on linux (suse 9.0). I set path for jdk a jvm and when run jdev.exe, i get this exception:
java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
Can you help with this problem?
ThanksTry executing "xhost +" before running JDeveloper. Did you login via XDM as a different user than you are using to run JDev? That's normally the cause for these X permission issues.
Hope this helps,
Rob
Team JDev -
Error installing jmf-2_1_1e-linux-i586.bin
h3. Hello,
h3.
I'm trying to install jmf-2_1_1e-linux-i586.bin on a Linux(centos 5.1) system. I get the results at the end of this post after accepting the license agreement. I haven't found anything on the web or the bug database that has been helpful. I'm really at my wits end and could use a helping hand.
h3.
Thanks in advance.
Do you agree to the above license terms? [yes or no]
y
Permit recording from an applet? (see readme.html) [yes or no]
y
Permit writing local files from an applet? (recommend no, see readme.html) [yes or no]
n
Unpacking...
tail: cannot open `+309' for reading: No such file or directory
Extracting...
./install.sfx.3639: line 1: ==: No such file or directory
./install.sfx.3639: line 3: syntax error neUQU599ù;···ÿrþÑÑÑ¢_Âò«KK)C{<>úú<<¿è
QQRLÙÜÌLÅ^sfx.36 88ø$èåõÕ®¢¬,àöè´iÑ­ÒÒÒV~ámn.à7w^ÝÂÆ,;M¢`ÞòA$D¨®¨¨ @ ɺÎwA'
--root@localhost lib--# PuTTYEdited by: eran_cantor on Jul 17, 2008 2:01 PM
Edited by: eran_cantor on Jul 17, 2008 2:02 PM
Edited by: eran_cantor on Jul 17, 2008 2:03 PMHey Eran,
I guess, you can find the solution to your problem here:
[http://forum.ubuntuusers.de/topic/jmf-java-media-framework/#post-1806940]
It works well on Ubuntu, but since the error on Ubuntu looks exactly the same as on Centos, I think it should work for you as well.
Cheers,
Georg -
Can't install Oracle_cal on linux EL5
Hey everyone, I am having some trouble installing oracle cal on linux EL5. I keep getting the following error when trying to invoke the installer. Does anyone know a solution?:
./gui_install.sh
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.11456/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directoryIt's probably not supported on RHEL5/Centos5/etc., but...
You can get the installer to function using the following steps:
- extract the cal_linux_*.tar.gz, and cd into the OracleCalendar_inst directory
In there is the actual installer, cal_linux.
- the cal_linux is shell script wrapped around some binary blobs. The installer's
problem is that Oracle is setting the LD_ASSUME_KERNEL=2.2.5 environment
variable, which is a mistake on RHEL5. You need to make it not set that variable,
but you need to do so in a way that the size of the shell script does not change at all,
and none of the binary blobs are impacted.
- the approach I took was
mv cal_linux cal_linux.BAK
sed -e 's/LD_ASSUME_KERNEL=2.2.5/LD_ASSUME_KERNEL= /g' < cal_linux.BAK > cal_linux
chmod a+rx cal_linux
cal_linux -i gui
Note: you must have exactly 5 spaces in the substitution part of the sed command, because you're replacing 5 characters (2.2.5), and the size of the shell script must not change.
If you do that, the installer should run (one warning from awk still) and you should be able to install the product.
Tim
Maybe you are looking for
-
Installation problem with the trial.
So recently i was thinking of installing the trial of Adobe photoshop CS5 extended so as i went through the installation form and language and system setting, but as i finish the form it took me to the download of "Adobe download Assistant" i install
-
"...Press Cancel, wait a few minutes and try again. (-60)" I've tried multiple times, but continue to get the same error. I've been able to download and install Dreamweaver, InDesign, and Premiere Pro with any problems.
-
I can't upgrade my MAC os from 10.7.5 to the latest available . Usual way of software update does not help. Keeps saying you have the latest update .
-
Does Dreamweaver CS4 work with Lion?
Can anyone tell me if Dreamweaver CS4 will still work if I upgrade to Lion? I tried to ask Adobe but was told by their support team that they would answer this question only if I bought 'bronze support' ! The telephone number they gave me to buy this
-
Lads please help me. I got Cubase SX3, being the most used professional program at this current time. I can't get rid of latency. I'm using windows2k and a soundblaster Augiy2 Platinum card. I really have to get this problem solved, çause i can't wor