Problems Installing Oracle 8i on Gateway laptop W/ 1.6 GHz CPU

I'm having problems installing Oracle 8i on a Gateway 600X with a 1.6 GHz CPU and Windows 2000 Professional. The Install/DeInstall screen appears, I click Install/Deinstall, the screen disappears, the hourglass disappears a couple seconds later, and the the install ends without any messages. I tried installing on slower machines and the software seems to install correctly. Is there an issue with Intel's new Mobile Pentium 4 processors or Gateway's laptops?
Thanks,
Mike

have a look in your $ORACLE_HOME/dbs directory. If the init<ORACLE_SID>.ora file has remote_login_password=exclusive then you should also have a file called orapw<ORACLE_SID>. If you haven't, then create one by running "orapwd file=orapw<ORACLE_SID> password=internal entries=5".
This has worked for me in the past, hope it helps.
Stef

Similar Messages

Problem Installing iStudio 10g on my Laptop

I am having problems installing iStudio 10g on my laptop (Windows XP). The install is erroring out at a point where it asks for the hub information, it says "An error occurred while validating the password of the ichub schema". I know for sure that I am using the correct password, as I can connect to the OAIHUB904 schema through SQL.
Any ideas, as to why I am facing this problem.
Thanks in advance.
Regards,
Hilal

Have you tried pressing the return key? Which Mac laptop are you using? What are the settings you see under Resolution in the Display preference pane?

Problem installing Oracle 9iAS on Win2000

Hi everybody,
I have problem installing Oracle 9iAS 1.0.2.2.2.a on Win2000.
The process instalation stops when the instalation bar shows 100% complete and copying welcome.html . After that, other processes should start, but it does not happen.
I have installed in an other machine an Oracle 8.1.7 release 3 and I set up parameters as described into documentation. I didn4t applied any patch because I was using release 3 already.
I have 1GB RAM , 1.5 Gb of virtual memory , 2 processors 1,3 Ghz,
and 10 Gb on HD target on both servers(Database and Application Server).
Does anybody have a sugestion ?
Thanks.

Kevin, I don't which version of 9iAS you are trying to install, but as far as I can tell no 9i versions of the application server are certified against Windows 2003, only 10g is certified against Windows 2003. So what's probably happening is the installer doesn't recognize Windows 2003 and thinks it's a non-patched version of Windows 2000. You should either install Windows 2000 SP1 (minimum) or install Oracle 10gAS.

Install Solaris 8 on Gateway Laptop with Windows XP

I have Gateway laptop with Windows XP pre-installed. Now I want to install Solaris 8 without removing the Windows XP. I wanted to use dual boot option. Can any body advice me if there is any whit paper on this subject(with step by step insturctions). I have partition magic but it can only partition and format to NTFS, FAT, FAT32 and Ext2 (linux only).
Thanks for your help.
rambo

It can be done but the biggest stump is the network interface. I've an Acer 350 series with a built-in NIC. I also use XFree86 because the Xsun doesn't recognize the video card. The biggest problem in getting Solaris x86 working is getting the network interface to work, since the PCMCIA support is horrible. You need to be sure the the components on your laptop conform to the HCL. As for X, just use XFree86.

Problem installing Oracle 8.05 on Redhat Linux 7.1

I am currently trying to install Oracle 8.05 onto Redhat Linux 7.1. I can get part of the way through
the installation, however, when it is installing the rdbms portion. I stops with an error about a failure
during relinking. Here is the part of make.log which details what really happened. Could someone tell
me how to proceed.
Thank you,
Nicholas Waltham
--------------[ rdbms.ins 2618 ]---------------------------------------------
Action: Installing install.
Command: (make -f ins_rdbms.mk ORACLE_HOME=/opt/oracle/home install), Out=/opt/oracle/home/orainst/make.log, Err=/opt/oracle/home/orainst/make.log
chmod 755 /opt/oracle/home/bin
rm -f oracle exp imp sqlldr tkprof mig dbv tstshm maxmem orapwd dbfsize cursize rman genoci svrmgrl extproc ihsalloci ihsots ihsdepxa ogms ogmsctl osh sbttest /opt/oracle/home/rdbms/lib/ksms.s /opt/oracle/home/rdbms/lib/ksms.o
echo " - Linking Oracle " ;\
/opt/oracle/home/bin/echodo cc -L/opt/oracle/home/lib/ -L/opt/oracle/home/rdbms/lib -o /opt/oracle/home/rdbms/lib/oracle /opt/oracle/home/rdbms/lib/opimai.o /opt/oracle/home/rdbms/lib/ssoraed.o /opt/oracle/home/rdbms/lib/ttcsoi.o /opt/oracle/home/rdbms/lib/config.o \
-lserver -lclient -lvsn -lcommon -lgeneric \
/opt/oracle/home/rdbms/lib/defopt.o /opt/oracle/home/lib/ncrstab.o -lknlopt \
-lslax -lplsf -lplsb -lextp -lserver -lclient -lvsn -lcommon -lgeneric -lknlopt \
-lslax -lplsf -lplsb -lextp -ldbicx \
/opt/oracle/home/lib/nautab.o /opt/oracle/home/lib/naeet.o /opt/oracle/home/lib/naect.o /opt/oracle/home/lib/naedhs.o `cat /opt/oracle/home/lib/naldflgs` -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /opt/oracle/home/lib/sysliblist` -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql `cat /opt/oracle/home/rdbms/lib/nmliblist` `if ar tv /opt/oracle/home/rdbms/lib/libknlopt.a | grep "kxmnsd.o" > /dev/null 2>&1 ; then echo " " ; else echo "-lmdknl -lmdhh"; fi` \
-lkidt -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /opt/oracle/home/lib/sysliblist` -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql ;
- Linking Oracle
cc -L/opt/oracle/home/lib/ -L/opt/oracle/home/rdbms/lib -o /opt/oracle/home/rdbms/lib/oracle /opt/oracle/home/rdbms/lib/opimai.o /opt/oracle/home/rdbms/lib/ssoraed.o /opt/oracle/home/rdbms/lib/ttcsoi.o /opt/oracle/home/rdbms/lib/config.o -lserver -lclient -lvsn -lcommon -lgeneric /opt/oracle/home/rdbms/lib/defopt.o /opt/oracle/home/lib/ncrstab.o -lknlopt -lslax -lplsf -lplsb -lextp -lserver -lclient -lvsn -lcommon -lgeneric -lknlopt -lslax -lplsf -lplsb -lextp -ldbicx /opt/oracle/home/lib/nautab.o /opt/oracle/home/lib/naeet.o /opt/oracle/home/lib/naect.o /opt/oracle/home/lib/naedhs.o -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnsl -lm -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql /opt/oracle/home/rdbms/lib/skgxns.o -lmdknl -lmdhh -lkidt -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnsl -lm -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql
/opt/ora cle/home/lib//libplsf.a(spssimb.o): In function `pss_gets':
spssimb.o(.text+0x4ef): the `gets' function is dangerous and should not be used.
/opt/oracle/home/lib//libgeneric.a(skgfr.o): In function `skgfrcre':
skgfr.o(.text+0x4de): the `llseek' function may be dangerous; use `lseek64' instead.
/opt/oracle/home/lib//libserver.a(hoco.o): In function `hoconsi':
hoco.o(.text+0x104d): undefined reference to `__strtoq_internal'
/opt/oracle/home/lib//libserver.a(hoco.o): In function `hoconui':
hoco.o(.text+0x126a): undefined reference to `__strtouq_internal'
collect2: ld returned 1 exit status
make: *** [opt/oracle/home/rdbms/lib/oracle] Error 1
Status: 2
(( OIERR-SYSTEM: make -f ins_rdbms.mk ORACLE_HOME=/opt/oracle/home install ))
--------------[ rdbms.ins 2631 ]---------------------------------------------
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Nicholas Waltham ([email protected]):
I am currently trying to install Oracle 8.05 onto Redhat Linux 7.1. I can get part of the way through
the installation, however, when it is installing the rdbms portion. I stops with an error about a failure
during relinking. Here is the part of make.log which details what really happened. Could someone tell
me how to proceed.
Thank you,
Nicholas Waltham
--------------[ rdbms.ins 2618 ]<HR></BLOCKQUOTE>
Well ,I tried to install Oracle 8.0.5 in Debian Potato. At end I desist.
Oracle 8.0.5 works with glibc 5 and Debian Potato with glibc6 .
I guess this is your problem.
There are patches for this but i don't get
to make work.
Sorry for my english.
Cisar

Problem installing Oracle 9i on a Debian 64bits (LD_ASSUME_KERNEL)

Hi,
I'm trying to install Oracle 9i on a Debian 64 bits server.
When I launch runInstaller, the installation process stops at 18% "copying naeet.o".
I had the same problem when I installed Oracle 9i on a RedHat 4, but I solved it by setting this env variable :
export LD_ASSUME_KERNEL=2.4.1
But when I do this on Debian, I can't run any command anymore, I get this error :
ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
I've been searching, but I can't find how to set LD_ASSUME_KERNEL without these side effects !
Can anyone please help ?
Thanks !

it seems to be very very hard to install Oracle 9i on Debian Etch, I found this on the net :
> Is it possible to install Oracle 9i on Debian etch?
So far I have had no luck due libraries requirement.
I appreciate any suggestions.Officially no.
Unofficially, you should be able to with a loooot of tweaking. The
secret is in the "compat" libraries. Basically Oracle is a binary
distribution and relies on gcc296 - not gcc3. You should also get your
own jdk install. Get 1.1.8 (yep - good old one) and use it to run the
installer. With Oracle9i there's no gurantee that the jdk in the
installer will run on your distro. Luckily you can override the jdk with
your own.
If anyone knows a simple way to do it, I'd like to know, but I'd rather give up about this idea
It seems to be to tricky for my poor Linux knowledge

Problem installing Oracle Identity Manager Server 9.1

Hello,
I try to install oracle identity Manager Server 9.1, but I'm having a problem.
Oracle identity manager 9.03 is already installed with jboss-4.0.3SP1 and j2sdk1.4.2_15
and oracle 10.2.0
So I follow these steps to clean out the db:
1. Drop tablespace: drop tablespace oimtbs including contents;
2. Drop user: drop user oimuser cascade;
and ran prepare_xl_db.bat as instructed. No errors in the log.
I ran the DiagonasticDashboard : the db setup was fine.
When I ran the installer "setup_server.exe", i haved this message :
Folowing Error occured during schema creation
Error encountered while loading database script
E:\OIM_Install\OIM9100\installServer\Xellerate/db/oracle/xell.sql
Please contact your DBA!
maximum key length (1478) exceeded
Does anybody have any idea what this error is about ?
Thanks.

Index IDX_LKV_LKV_ENCODED on Table LKV (Column :- LKV_ENCODED - VARCHAR2(3000)) is failing on 2k block size. Though all the Indexes are working fine with the 4k block size.
But OIM Dev team recommends to create the 8k block size for the Index storage.
Because the blocksize affects the number of keys within each index node, it follows that the blocksize will have an effect on the structure of the index tree. All else being equal, large blocksizes will have more keys, resulting in a flatter index than the same index created in a 2k tablespace. A large blocksize will also reduce the number of consistent gets during index access, improving performance for scattered reads access.
HOW TO CREATE THE INDEXES IN LARGER BLOCKSIZE TABLESPACE
In the existing database:-
Create a tablespace with the 8k blocksize, For Example
First,
Set the system cache size for that particular db block size
sql> alter system set db_8k_cache_size=100M;
sql> CREATE TABLESPACE db_8k_tablespace DATAFILE 'C:/oracle/product/10.2.0/oradata/8k_file.dbf' SIZE 100M BLOCKSIZE 8192;
Then
Reorganize the Index using command:-
sql> Alter Index <Index_Name> Rebuild tablespace <Tablespace_Name>
Regards,
Neeraj Goel

Problem installing Oracle Internet Developer Suite 1.0.2.4.1 (Forms & Reports 6i)

Hi all,
I am unable to install Oracle Internet Developer Suite 1.0.2.4.1 - specifically Forms & Reports 6i, Designer, Discoverer (ALL Products on Quick Install option on Windows 98 system). The installation proceeds to Install screen when the various files start to load ... Then the whole process stops after showing 100% load (sometimes the screen freezes, sometimes I get error message - illegal instruction etc) when the following file is being loaded :
Extracting ... ewt_swingaccessbridge.jar
I have another question :
I have Personal Oracle 8i (8.1.7) installed on D:\Oracle\Ora81 already.
During the install process (before I get the above error message) the 8.1.7 RSF-based product install location screen presents itself with the option to create a new Oracle Home and location (The preferred Oracle Home name iDSData and preferred Oracle Home Location D:\ORACLE\iDSData are already entered in the boxes) or Select an existing ORACLE_HOME. My existing ORACLE_HOME is
D:\Oracle\Ora81. What am I supposed to do at this point ? The installation guide is not explicit. Any help with these topics will be greatly appreciated.
I will be greatly obliged to anyone who can assist me with installing Forms & Reports 6i. Many thanks in advance.
Sincerely,
Partha Sur
[email protected]

Had the same problem too. It won't install in the same directory as your database. You need to create a new directory on your hard drive and have it installed there. Worked for me.
Regards,
LP

Problem Installing Oracle Client 11g R2 64 bit on Windows 7 Enterprise 64

Hi,
I am having problems installing the Oracle Client 11g R2 64 bit installation on my Windows 7 64 bit Enterprise machine. The installer does all the checks successfully, it gets me to summary screen and I press finish to start the installation. It then opens the installation mask where it first says Checking whether Central Inventory is locked by another OUI session. After that it very briefly shows Central Inventory is not locked and then the window immediately dissapears with no other errors. I tried installing at my colleague's W7 Enterprise 64 machine and it behaves a little differently but with the same result. Basically on his machine it never even opens the Install mask, when pressing finish from the Summary it just disappears and never starts installation. I tried installing 11g R1 and that loads the first mask and when i press next it just dissapears. I basically need an oracle client 64 bit installation on my machine deperately. Please help. Thanks
Alex

One user above reported installing the 64 bit odbc drivers and then the 32 bit drivers. How did you do that? I'm a neophyte to this.
I'm trying to get a 32 bit ODBC oracle driver to work on a server 2008 R2 machine. I downloaded the 11gR2 x64 client from oracle. The install process makes no mention of 32bit vs 64bit installation. After running the instalation I can run the ODBC administrator and generate a DSN for oracle. When I run the 32 ODBC administrator there is no oracle driver available except the microsoft driver for oracle. When I select that it says that I need to install oracle.
I had at first tried to install 11g instant client. However that didn't work for the 2008 R2 machine. It complained about some registry error when I tried to run the ODBC install program. I need to get it to work for a customer asap.

Problem installing Oracle forms and report in windows 7

I have a problem while installing Oracle forms and reports in windows 7 64 bit
The error is : [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IY5_e_EApIRMyYAhMG1BuDGr00000B,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
So I Google for it and found that this is version mismatch (May be I am wrong) and it tells that I have to install WLS - 10.3.2 with ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
But I am unable to get wls version 10.3.2.
For better understanding I am listing my installers :
(I) Windows 7 Ultimate 64 Bit
(II) (Oracle 11g) win64_11gR2_database (1 & 2)
(III) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
(IV)wls1033_generic.jar , wls1033p_generic.jar , wls1035_generic.jar
(V)accessbridge-2_0_2-fcs-bin-b06
(VI)ofm_rcu_win32_11.1.1.2.1_disk1_1of1,ofm_rcu_win_11.1.1.3.1_disk1_1of1
(VII) ofm_wc_generic_11.1.1.5.0_disk1_1of1
(VIII)jdk-6u38-nb-7_2_1-windows-i586-ml , jdk-6u38-windows-x64
(IX) oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32
(X)wls1033_oepe111150_win32.exe
(XI)wls1035_win32.exe
(XII)wls1035_oepe111172_win64
(XIII)oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win64
After the installation while configure the forms reports, I am stuck while creating domain.
steps I follow is :
(i) Install Windows 7 Ultimate 64 Bit
(ii) (Oracle 11g) win64_11gR2_database (1 & 2)
(iii) wls1033_generic.jar
(iv) accessbridge-2_0_2-fcs-bin-b06
(v)ofm_rcu_win32_11.1.1.2.1_disk1_1of1
(vi) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
Please any body help, for the installation of oracle forms and reports.
I have a formatted Windows 7 Ultimate
Where I have installed Adobe Acrobat Reader
IIS server from windows installer
Now I want to know the exact procedure so that i can run the forms and report in my machine.
This is my first installation of Oracle forms & Reports, so please do not pre assume about my understanding (Like "to install this he surely did this environment settings" )
Please specify all the steps
Furthermore if Another software I have to download then please tell me.
And I will be grateful if you specify the mistakes in my side.
Looking forward with anticipation.

Solved, Thank you

Problem Installing Oracle 8.0.5 on Windows 2000 Server (SP2)

When i trying to install Oracle 8.0.5 on Windowns 2K Server
(with SP2), after migration from NT4, the process the
installation stop (CD, screen) when load DLLs Oracle, without
msg error.
(I Know Oracle 8.0.5 is pretty old, but...i have).
I'm not sure what the problem is. Any help/commands/how to
would be great? If anybody has any idea of why I am experiencing
this problem, I would appreciate the help.
Thanks,
MJP

Don't install SP2 on Win2k.
Reinstall Win2K without SP2.
Alex.

Problem installing Oracle 8i(8.1.7) standard edition on windows 2000 server

I am trying to install Oracle 8i (8.1.7) standard edition on windows 2000 server but the setup program doesn't run.
It starts up, allocates some ram then closes before a window even pops up.
I also have MSSQL server installed on this computer, does that conflict?
Has anyone encountered this problem before? If so, please give a solution if you have one, thanks,
OPS

Yes. There is a bug with Pent4, Win2000 & Oracle8i.
Here is the workaround:
This is a known bug with Oracle java-based applications and Pentium 4 Use this work-around:
1) Copy the install directory from the CD to the hard disk.
2) Edit oraparam.ini and modify it as follows:
* Edit the "SOURCE=" line to to show the full path to the CD ; SOURCE={CD DRIVE LETTER}:\stage\products.jar)
* Edit the "JRE_LOCATION" line to show the full path to the CD ;
JRE_LOCATION={CD DRIVE
LETTER}:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles\Expanded)
* Edit the "OUI_LOCATION" line to show the full path to the CD ;
OUI_LOCATION={CD DRIVE
LETTER}:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataFiles\Expanded
* Edit the "JRE_MEMORY_OPTIONS" line to include "-nojit" as the first argument ;
JRE_MEMORY_OPTIONS=-nojit
-ms16m -mx32m
3) Start setup.exe from your hard drive
Choose a Custom install and choose not to create a database during the install.
This way, the Database
Configuration Assistant will not be launched during installation. DONT SELECT
NET8 products for installation.
You need to put the same java parameters for the DB configurator and the Net8
Configurator
to run.
-nojit -ms16m -mx32m before -classpath on:
* assistants\dbca\DBAssist.cl
* network\tools\netca.cl
** Run the DataBaseConfigurationAssistant and NetworkConfigurationAssistant after installation.
Hope it helps!
Amrit

Problem installing Oracle 8.0.5 on Red Hat Linux 7.0

Hi,
Due to a software requirement, I have to install Oracle 8.0.5 on Red Hat Linux 7.0. (I know Oracle 8.0.5 is pretty old and so as RH Linux 7.0 but that is what required).
I downloaded the Oracle8051EE_Intel.tgz from Oracle and tried to installed it but it didn't work.
It crashed out when it tried to run some of the SQL script during the installation using SVRMGRL. Later on, we found out all the binaries under $ORACLE_HOME/bin were corrupted during the installation. We did a comparison of the size of SVRMGRL and SQLPLUS and they are different from the Stage (or the one from the .tgz).
Does anyone have this problem before? Will 8.0.5 works on Linux 7.0?
Thanks in advanced for any help.
Best regards,
William
null

I'm having the same exact problem. The link you have provided
seems to be a bad link. I would really appreciate it alot if you
could help get us through this first step of starting the oracle
installer interface. I never thought it would be this hard to
get started.

Problems installing Oracle 8.0.5. over OpenLinux 3.1.

Hello everybody:
I tried to install Oracle 8.0.5. in my linux box last weekend. All the procedure went OK until it went into the relink process, then it suddenly stopped with a message similar to this one: 'ld:libserver.a:Undefined symbol __strtoq_internal.'
Obviously, I can not go on with the installation.
Anyone knows how to solve the problem?
Thank you very much.

Hallo !
Three weeks ago I had successfully installed Oracle 8.0.5 on RedHat 6.1; some tips:
As described in ftp://ftp.oracle.com/pub/www/otn/linux/README download the five compaitibility RPMS
compat-binutils-5.2-2.9.1.0.23.1.i386.rpm
compat-egcs-5.2-1.0.3a.1.i386.rpm
compat-egcs-c++-5.2-1.0.3a.1.i386.rpm
compat-glibc-5.2-2.0.7.1.i386.rpm
compat-libs-5.2-1.i386.rpm
(I have got them from
ftp://ftp.tuwien.ac.at/opsys/linux/redhat.com/dist/old-releases/redhat-6.0/i386/RedHat/RPMS/
and install them.
The glibcpath.tgz is available from OTN. Install it as described in the ORACLE RAEDME.
Good luck !
Heinz

Problems: install oracle 10g 32 bits on RH 5.8 x64

Hello,
Someone has given me an oracle 10g 32 bits to install on a Redhat 5.8 64 bits server (no other server available).
I have a lot of errors during the installation process
exemple:
INFO: /usr/bin/ld: skipping incompatible /oracle/client/10x_32/lib/libxml10.a when searching for -lxml10
/usr/bin/ld: cannot find -lxml10
collect2: ld returned 1 exit status
I installed libxml10 64 and 32 bits on the system !
I would like to know if this configuration is POSSIBLE ???!
If yes, what is the solution / process to fix these compli. problems :-|
Thanks for your help !

962147 wrote:
yes i read the installprocess and pre requisits:
But first "**is it possible to install oracle 10g 32 bits on redhat 64 bits ???* "
yes or no ? :-(
I've never seen any 32-bit software that DIDN'T run on a 64 bit OS, as long as the necessary libraries are installed.
I used this process: is it the good one ?
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-installation-on-rhel-5.php
Tim does a very nice job with his stuff on oracle-base, but that is NOT the official documentation. Why not use ORACLE'S own installation guide? Have you seen http://docs.oracle.com/cd/B19306_01/install.102/b15667/toc.htm
And why are you installing a a version of Oracle that is out of support?
And as long as you have a 64-bit OS, why would you want to run a 32-bit version of Oracle?
Edited by: 962147 on 29 sept. 2012 13:06Edited by: EdStevens on Sep 29, 2012 9:22 PM

Problems Installing Oracle 8i on Gateway laptop W/ 1.6 GHz CPU

Similar Messages

Maybe you are looking for