Problems installing photosmart b110a on Windows 7 64-bit - FATAL ERROR in driver installation!

Hello,
maybe that you can also help my with the installation of the driver software for my B110a on my Windows 7 64-bit Enterprise Edition Laptop. I downloaded the driver software from:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-82451-1&cc=de&dlc=de&lc=de&...
I tried it several times, including the HP Installation Error - Windows 7.hta guidance. Actually I've already installed a lot of printers on PC's in my family - i've never experienced such a problem...
I always ended up with a "fatal error" :
1. fatal error:
2. error information send to HP:
3. details / error situation code:
Any help is highly welcome and appreciated since I am quite desparate in the meantime - after trial & error for more that 3 hours... ;-(
Many thanks in advance & best regards from Switzerland, Dominic
Dominic Rihm
[Personal Information Removed]
This question was solved.
View Solution.

The fatal error you got with the B110a is caused by an .msi error. The document below should walk you through that.
Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
The fatal error you got with the B109a might have a different fix. It would depend on the exact error code you received. The document below should help you find the error code and work through the fatal error.
A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

  • Problem installing Creative Cloud programs Exit code 7.  ERROR: updating driver failed

    I am trying to install Creative Cloud programs, have managed to  download and install Dreamweaver and Photoshop but when trying to install Fireworks and other programs I get the error message Exit code 7 : Error: updating driver data failed.  Driver entry not added.
    I am using a Dell 5010 running Windows 7.
    Please help!

    See the following help document:
    "Exit Code: 6," "Exit Code: 7" Installation Errors -
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  • Problems installing two printers on Windows 7 64 bit

    I have a brand new desktop with windows 7 64 bit installed. I have successfully installed a Photosmart C4585 All in One on it wirelessly, but when i try to install my Photosmart D5160 via usb using software from HP Website the C4585 is disabled and computer crashes on startup.
    After uninstalling the D5160 the wireless printer works fine.
    How can i install the Photosmart D5160 without crashing computer on start up and not interfering with the C4585 printer please.

    The fatal error you got with the B110a is caused by an .msi error. The document below should walk you through that.
    Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
    The fatal error you got with the B109a might have a different fix. It would depend on the exact error code you received. The document below should help you find the error code and work through the fatal error.
    A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • I cannot select the Paper Size when I try to print with HP Photosmart B110a with Windows 8.1 64bit

    I cannot select the Paper Size when I try to print with HP Photosmart B110a
    The same printer was working OK with my old PC with OS Windows 7
    However I got a new PC with OS Windows 8.1 64bit
    I installed the new driver for HP Photosmart B110a that I dowloaded from HP site. Driver forWindows 8.1 64bit.
    In addition to not being able to chose the paper size, also when I go to Printer Properties in Options, all the characters are non-ascii.
    Do you know what may be the problem?
    Thank you

    Hello Nanu64,
    Welcome to the HP Forums.
    I see that you are having some issues when attempting to print from your computer.
    I also see that you stated that not all the options are available in the printing preferences options.  This could be because the installation was not complete or it failed.
    I suggest that we do a complete uninstall/ reinstall as well as some additional steps.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    If you have the printer connected to the computer with a usb cable, please remove the cable from both ends and leave it disconnected until further notice.
    The next link that I have for you will give you detailed instructions for Uninstalling the Printer Software.  Once the uninstall is complete, reboot the computer so that the changes take affect.
    When the computer is back up and running, please disable any firewalls or anti virus protection you may have running. We don't want anything getting in the way of the reinstall.
    The following download is the HP Photosmart Full Feature Software and Drivers.  Save this download to the desktop of the computer so that it creates its own icon.  This will make it easy for us to find when the download is complete.
    Double click the new icon and follow the installation instructions.  The installation will give you connection options (Wireless , usb or Ethernet), if connecting usb, please wait for the prompt to connect the cable.  Connecting the usb cable before hand can cause an issue with the installation.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Problem Installing Developer Suite on WIndows Vista

    Hi! i'm a student of computer science, and i need to install developer suite for a proyect i need to do for one of my classes.
    I have a problem installing developer suit on Windows Vista. After i download and unzip both disk, i run the setup from the installer folder and i get an alert that says: "abnormal termination. There's been an internal error. Send the following files to the Oracle Suport Services: Unknown, Unknow, Unknow". I've also tryed with the setup from the main folder and i get the same alert. I don't know what to do, i've tryed setting the compatibility mode to windows XP, runnig as administrator, changing the performance configuration of my computer and nothing. Please help me to install the program!

    Which developer suite are you using???

  • Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

    Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    If that is too inconvenient, using Google Chrome may be a preferable alternative.

  • I tried installing an update to QuickTime. An error occurred and it wouldn't install. I tried removing the QuickTime program, but a window appeared telling me that a fatal error  ccurred during installation and I could not remove the program.  Now what?

    I tried installing an update to QuickTime. An error occurred and it wouldn't install. I tried removing the QuickTime program, but a window appeared telling me that a fatal error  ccurred during installation and I could not remove the program.  Now what?

    I tried removing the QuickTime program, but a window appeared telling me that a fatal error  ccurred during installation and I could not remove the program.
    I think we'd better see if some other application (other than QuickTime itself) has dropped old QuickTime componentry in the system files on the PC. (If there's a version mismatch between the old componentry and the "QuickTime proper" componentry, that can create those symptoms.)
    So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view options on the PC.
    1. Open My Computer from the desktop or Start menu.
    2. In the Tools menu, click Folder Options.
    3. Click the View tab.
    4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
    5. Click OK.
    Now in My Computer, open your C drive.
    Open the "Windows" folder.
    Open the "system32" folder.
    What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • Trying to re install Photshop elements6 on my new computer. Error message reads  Installer database is corrupt

    Trying to re install Photshop elements6 on my new computer. Error message reads  Installer database is corrupt

    Rainstormn please see Error "...Installer Database is Corrupt..." when you install Adobe Creative Suite 4 or point product for information on how to resolve your current error.  In the future please only transfer your documents and settings to your new computer.  You can then install any needed applications.

  • Problem Installing Oracle Client 11g R2 64 bit on Windows 7 Enterprise 64

    Hi,
    I am having problems installing the Oracle Client 11g R2 64 bit installation on my Windows 7 64 bit Enterprise machine. The installer does all the checks successfully, it gets me to summary screen and I press finish to start the installation. It then opens the installation mask where it first says Checking whether Central Inventory is locked by another OUI session. After that it very briefly shows Central Inventory is not locked and then the window immediately dissapears with no other errors. I tried installing at my colleague's W7 Enterprise 64 machine and it behaves a little differently but with the same result. Basically on his machine it never even opens the Install mask, when pressing finish from the Summary it just disappears and never starts installation. I tried installing 11g R1 and that loads the first mask and when i press next it just dissapears. I basically need an oracle client 64 bit installation on my machine deperately. Please help. Thanks
    Alex

    One user above reported installing the 64 bit odbc drivers and then the 32 bit drivers. How did you do that? I'm a neophyte to this.
    I'm trying to get a 32 bit ODBC oracle driver to work on a server 2008 R2 machine. I downloaded the 11gR2 x64 client from oracle. The install process makes no mention of 32bit vs 64bit installation. After running the instalation I can run the ODBC administrator and generate a DSN for oracle. When I run the 32 ODBC administrator there is no oracle driver available except the microsoft driver for oracle. When I select that it says that I need to install oracle.
    I had at first tried to install 11g instant client. However that didn't work for the 2008 R2 machine. It complained about some registry error when I tried to run the ODBC install program. I need to get it to work for a customer asap.

  • Problems installing OBIEE 11g on Windows Server 2008 64 bit

    Hi, I'm trying to install OBIEE 11g on Windows Server 2008 64 bit (standard edition, SP2), and it's blowing up running the installer. The installer gets past the first couple of "info" screens, but blows up prior to coming to the first "real" screen with an error:
    Microsoft Visual C++ Assertion Failed:
    Program: ...
    File: ../../../src/share/native/sun/font/t2k/t2kstrm.c
    Line: 132
    Expression: pos <= t->maxPos
    Has anyone seen this and/or have an idea how to work around this? Note that I did do the prerequisite download / install of the 2005 Visual C++ 64 bit libraries.
    Thanks,
    Scott

    Just to close the loop on this thread, this does indeed seem to be some sort of font / java issue on our servers. I've been completely unable to get the install to work using the GUI. However, if I run it from command line using the -silent and -response paramaters along with a proper response file, the install went perfectly. I'm going to continue working the SR with Oracle - don't want to be stuck using -silent mode when things get more complicated, but at least now I can move forward.
    If anyone else has a better workaround - please let me know. "Silent" mode is workable, but difficult and time consuming.
    Thanks,
    Scott

  • Installing photosmart C5283 on windows 8

    I have a Photosmart C5283 All in One. I bought a new computer - Lenovo Ideapad Z710. I want to install the printer onto the computer but I get a message that the operating system (windows 8) is not supported. How can I install the printer? I heard that there is a driver that can be installed on the printer that will enable the installation. Is this correct? Or do I have to upgrade the operating system?
    Thank you.
    This question was solved.
    View Solution.

    Thank you for your response. On the solve problems section I found a link to download something that enabled the installation. I think what I did was exactly what you suggested. I followed the directions on the HP site and it worked.
    Great!

  • Problem installing iTunes on my Windows Laptop

    Hi people
    Right I've had this problem for a while, I try to install iTunes but have faced problems. Im using a windows 7 64-bit advent laptop.
    Recently the error was iTunesHelper was not installed correctly as I tried installing the new itunes, and i DO NOT want to have to delete my laptop completely back to factory settings. There is no system restore in place, and I have tried deleting every file+ software associated with apple.
    PLEASE PLEASE HELP ME
    Thank you!

    Also the installer tells me that iTunes has installed correctly, but when I open it Error 7 (Windows code 14001) appears.
    When I open QuickTime I'm told that "the application has failed to start because of its side-by-sde configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail" appears.
    Please help me

  • Problems installing and starting on Windows 7 64bit. error message - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes.

    Hi I'm having problems installing and starting itunes program on Windows 7 64bit. After install the following error message is flagged - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would really appreciate any pointers!

    Never mind sorted it out lol. Somebody did a system restore of a week or so. I had done the update during that time and it was lost. Just redownloaded itunes from the internet and its working fine now.

  • HP Photosmart c6280 fatal error 1606 during installation - Windows Vista 64 bit

    Hi!  I have a HP Photosmart c6280 printer that we have had for a few years.  We moved it and configured it for USB use instead of wired via ethernet through the network.  It worked great, but now my wife's project is done.  Now we have moved it back and wired it through the ehternet cable into the router. 
    It will print, but the HP solution center doesn't recognize it and it will not scan or do any othe functions.  I have done a complete UNINSTALL and reinstall multiple times. 
    After installation I checked the event viewer and every install fatal error is a "1606" and it states the following:
    Product: PS_AIO_02_ProductContext -- Error 1606. Could not access network location %APPDATA%\.
    I am ata complete loss as to how to resolve this......someone please help!
    Sheriff

    I would suggest doing a L3 uninstall on the printer. 
    1. Run disk cleanup on your computer- you can pass this step if you want
    2.Download and run the software and drivers below.=
    3. Once the download is done extracting, cancel the download.
    4.. Press the Windows key + R on the keyboard to bring up the run menu.
    5. Type %temp% in the run field and click OK.
    6. Look for, and open the folder starting with 7z (Example: 7zS2356)
    7. Open folder Util
    8. Open folder CCC
    9. Run the uninstall_ L4.bat 
    10. When the uninstall has completed restart the computer
    11. Run Disk cleanup from Accessories\ System Tools
    12. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    13. Use this tool to clean the system and registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damages or loss of data caused by the utility.  This step is optional.   You can skip it if you want.
    http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
    14. Download and run the software and drivers below.=
    15. Run the download to reinstall the printer
    Note: Before making any changes to the registry make sure and make a backup copy.
    Back up registry:
    Type regedit in the search programs and files
    Click file, and then export
    Type file name, and chose save to location
    TAKE OUT ONLY THESE KEYS/FOLDERS!!!
     HKEY_CURRENT_USER > Printers>DevModes2 > * c6280 *
    - (delete printer name from window list; may need to check DevMode and Settings folders, too)
     HKEY_LOCAL_MACHINE > software> Hewlett Packard > Digital Imaging folder
    - (delete ENTIRE folder – IF computer NOT an HP, delete the ENTIRE HEWLETT PACKARD folder)
     HKEY_CURRENT_CONFIG> System > CurrentControlSet > Control > Print > Printers > * c6280 * - (delete any HP printer folders and the folders of any printer not in use)
    After this please restart the desktop, and then install the Download and run the software and drivers below. (select your OS)
    Just a note - if you participate in this thread I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

  • Problem installing ActiveX viewer in Windows 7

    Hello,
    We downloaded the public beta of Windows 7 today and I am getting an error in our web application when it tries to install the Crystal Reports XI ActiveX report viewer (version 11.0.0.1424 of crviewer.dll).  IE8 will issue its normal prompt to ask you if you want to install the control, but after that, the little object image in the upper-left corner of the page turns to a red X.
    I tried using the sample code which comes with Crystal XI (SimplePreviewReport.asp in the "BeginHere" folder) and that had the same problem.  I put some debug code into SmartViewerActiveX.asp and found that I was getting an "ActiveX component can't create object" error on this line:
         Set webBroker = CreateObject("CrystalReports11.WebReportBroker.1")
    I don't think it's a security issue because I am an administrator on the machine and I didn't have any problems installing other ActiveX controls.  I tried running the web site in both the Local Intranet zone as well as the Trusted Sites zone.  I'm also thinking that the issue is more with Windows 7 than IE8 because I have IE8 Beta 2 installed on a Windows XP machine and the Crystal ActiveX viewer installs just fine there.
    Thanks in advance for any suggestions!

    XI R2 is more then an incremental update in some aspects to XI R1. They are officially versioned 11 and 11.5 and XI R2 is considered a new release. However in most aspects to a Crystal R1 customer XI R2 doesn't offer much more in functionality other than it is more up-to-date and is still receiving updates and patches.
    With out looking at Operating Systems or other factors I generally recommend R1 customers move to R2 so they are kept up-to-date. However being an new version that does mean you will need to update your projects to call the R2 runtime, and then you can use the R2 merge modules.
    As for how R2 merge modules work with Windows 7 I cannot say. We will have to wait until Windows 7 final build comes out before we will get a list of supported products on this Operating System, and this can take upwards of 3 months after the OS is released. I would hazard a guess (NOTE: GUESS is the important word here) that R1 and R2 will not be certified with Windows 7. This does not mean it will not work, but does mean it will not be tested and if errors are found that are particular to this OS they will not be fixed.
    Remember that this is just a guess, based on R2 being 3 years old and nearing end of its patch cycle and Windows 7 being at least 4 months away. However this cannot be concidered an official statement it is just my personal opinion. Enough caveats there?
    Trevor

Maybe you are looking for