Problems installing QuickTime 7 with iTunes 6 for Windows XP

I am encountering problems with the latest version of QuickTime (version 7.0.3) together with iTunes 6.
Installation is fine except at the end when I receive an error message saying ’1628: Failed to complete installation’. It appears that both programmes have been installed and work but I am unable to uninstall them. Neither program appears in the Add/Remove programs list when they should be. If I select ‘Uninstall QuickTime’ from the Program list the uninstalation process starts but stops half way through.
I have tried downloading QuickTime standalone version but this is exactly the same. I removed the QuickTime folder, and all its contents, from C:\Program Files\QuickTime and installed the previous version (6.5.2) which installs and uninstalls fine.
I am at a loss as to why the latest version is causing problems.
Would appreciate any help or advice as to why this is happening?
Thanks

Will a 2nd Gen Shuffle sync with iTunes 6 for
Windows?
NO... 2nd Gen shuffle requires iTunes 7.0.2 or later

Similar Messages

Problems with ITunes 10 for Windows with Ipod Touch

I have had several problems with my original 16Gb ipod touch since upgrading to ITunes 10. Windows Vista Home Premium. I had no significant problems before ITunes 10.
1. Numerous apps upgrades fail with an error message (approx) "installation failed because resources have changed." I have searched for information about this, but all I could find relates to developers, not ordinary users. I can upgrade the apps directly, using a wifi link - just not through ITunes 10. (Apps: Dictionary.com, StarWalk, etc.)
2. After repeated examples of this, I decided to try restoring the ipod. I've done this several times in the past without problems. This time, it repeatedly failed at step 3 of 5, re-installing my music, with "unknown error." The ipod was unusable after this. I eventually had to restore on another computer that still had ITunes 9 installed - that worked, but I lost all me recent data entries. (After successfully restoring using ITunes 9, I tried again with ITunes 10 - same failure.)
3. Now, all podcasts that I install are played back at an unusable low volume. They are just loud enough to barely hear in a very quiet room, but not loud enough to be usable. The podcasts play fine when played directly in ITunes. Music installed on the ipod plays properly. I have tried using the Podcast option in ITunes to change the volume, but that has no effect. I have tried several speakers and headsets - all the same. Podcasts are probably the most important use of my ipod, and now they are useless. These are popular podcasts, such as CBC's As It Happens - I don't think that the originator would have had an undetected problem for this long.
Any suggestions?

This symptom could be caused by an unusable iTunes configuration file. Follow the steps below to troubleshoot this issue.
Remove SC Info.sidb file
(This applies to Win7 or Vista)
From the Start menu, click Computer.
In the Organize menu, click Folder and Search Options.
Click the View tab.
In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected.
Click OK.
Navigate to the following location by either typing it into the address bar, copying and pasting it into the address bar, or clicking through the folder hierarchy listed: C:\Program Data\Apple Computer\iTunes\SC Info
Right-click the SC Info.sidb file shown and on the shortcut menu, click Delete.
Right-click the SC Info.sidd file shown and on the shortcut menu, click Delete.
Restart the computer and open iTunes.
If this does not work, repair your Quicktime - START / CONTROL PANEL / PROGRAM and FRAETURES / highlight QUICKTIME and click REPAIR

Problems with iTunes 8 for Windows, 1G iPod Nano

i'm running iTunes 8.0.1.11 on my Windows XP Pro SP3 desktop, using it to manage my 1G iPod Nano 4GB software version 1.3.1.
ever since upgrading to iTunes 8, i've had a few issues with the way it syncs (or doesn't sync, in my view) with the iPod:
1: podcasts.
prior to iTunes 8, the two most recent unplayed episodes would sync and delete after play - "play" being defined as starting to play the podcast. i didn't have to listen to the entire podcast for it to be removed. this worked for me, because many of the podcasts i listen to are news highlight shows (some run almost 2 hours). i'm usually only listening to specific parts of the show, not the whole thing.
now, if i haven't listened to the entire thing, it doesn't delete. not only that, iTunes doesn't even automatically throw away listened podcasts from the computer anymore. not so big a deal on the computer (it's got plenty of disc space), but on the teeny-tiny iPod, it's a problem.
so now i don't listen to podcasts on my iPod anymore. is there a fix so i can take my news with me again?
2: music playlists.
prior to iTunes 8, when i synced a playlist to the iPod, it synced the playlist's +current order+. in other words, if it was shuffled in iTunes, it was synced to play in the shuffled order.
not any more. now, it only passes the "base" order of the playlist; i.e., whatever order it was "built" or manually arranged in. this is bloody aggravating. i don't want to listen to the same ten songs every time i hit play.
adding insult to injury, iTunes also no longer passes whether the playlist is set to repeat. so it stops playing after the last song. also extremely aggravating.
i realize that i can select "Shuffle Songs" in the iPod's menu. but since this shuffles all the songs on the device, it somewhat defeats the purpose of having bleeding playlists, doesn't it?
i realize Apple wants me to buy the newest, bestest hardware every time it comes out. but i like my old iPod, and it did exactly what i wanted and expected. until iTunes 8. so, any fixes for these issues out there?

This is a well-known issue. Apple changed the internal file names used with iTunes 8, which makes the ordering on 2nd generation Shuffles behave differently. There is no good workaround, apart from moving the files with a hand-crafted AppleScript program.
Apple has been silent on the issue, so nobody knows if we'll ever have a fix for it or not.

Problems installing iPod software with iTunes

I get the message "The software for this ipod is not installed correctly. Please reinstall iTunes to install the required software." I have reinstalled iTunes and still get this message. I have the latest version of iTunes installed (11.1.4.62) running on Windows 7. Any suggestions?Problems

Hi welcome to Apple Discussions!
Yes, I do know what could be the issue. Your computer may be confusing your iPod with a different drive (thus not recognized or keeps repeatedly asking to name iPod).
In this case the thing to do is try assigning your iPod a different drive letter. in "Control Panel".
Go to "START -> Control Panel".
Click on "Administrative Tools" (if you can't see it, switch to the "classic view" in the left panel).
Go to "Computer Management", then "Disk Management" button in the left area.
Right-click on your iPod there, and click on "Change Drive Letter and Paths...". Change the letter to something like "M" or "N" (further along in the alphabet).
It should look like this picture:
For more details, see this articke , which basically says and explains the same thing:
Assigning your iPod a different drive letter
I hope this solves your issue
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

Problem syncing iPhone apps with iTunes 12 on Windows XP

I'm having problems on multiple machines completing a first sync after restoring from iTunes backup.
I keep getting this pop-up error message once iTunes has identified the apps to sync (Step 7 of 7)
"The exception unknown software exception (Oxc0000417) occured in the application at location 0x78b2af3e"
I've attempted a complete iTunes re-install but it still throws up the same error
Has anyone else come across this problem?

Lovely, helpful detail, scott. Many thanks.
Get an error message "The application or DLL C:\Program Files\Common Files\Apple Application Support\Core Media.dll is not a valid Windows image.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Add or Remove programs control panel, select "Apple Application Support", click "Change" and then click Repair.
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post (although it's for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things):
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a window pops up saying that the

Problems installing amd drivers on HP Dv7 for windows 10

I have the HP DV7 4263cl with switchable graphics AMD chipset M880G with both Mobility Radeon HD 4250 and AMD 6370m. My processor is the AMD Phenom II. The drivers on HP's support site for my laptop are very old (2010) and work fine in Windows 7. However when I try to install the drivers in compatability mode on in Windows 8.1 or 10 or manually install them through the device manager, my computer does not respond well and doesnt install everything fully and either shuts down or shows a blue error screen.
I have tried everything and haven't had any luck getting these installed. Please Help!!!!

Yours is the third post I've seen about switchable graphics not working in Windows 10. Sadly, you may have to simply hope for a Windows 10 driver update. Have you checked for a Chipset or BIOS/UEFI update? Maybe you would have better luck on the AMD forum. If you found my answer helpful please say thanks by clicking on the Thumb's Up icon. Thanks!

Error in Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Hello Everyone,
I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
Please send me a feasible solution to this problem.
Thank You.

Uninstalling the iCloud control panel should allow you to do that folder deletion.

I can,t install iTunes 11 for Windows application failes to start because MSVCR80.dell was not found Windows 7

I cant install itunes 11 for Windows 7, application fails because MSVCR80.dill is missing from my computer

Hopefully this article will assist you:
≈≈≈≈≈≈≈≈
http://support.apple.com/kb/TS5376
≈≈≈≈≈≈≈≈
Please do reply with results/questions.

Help! Bought a used iMac (2008) and I'm trying to install quicktime but its asking me for a password and has Apple in the "Name" spot. How do I retrieve or reset the password?

Can anyone help...
I just bought a used iMac (2008) from an ebay seller and I'm trying to install quicktime but its asking me for a password and has Apple in the "Name" spot.
How do I retrieve or reset the password?
It came with the upgrade of Mountain Lion but I cannot find quicktime in the applications. When I try to install anything this Installer Password thing comes up... so I'm stuck.

ShirlFromNC
I think you're slightly misunderstanding something, so maybe I'll try to chime in, even though everyone has said it in various ways.
Before OSX 10.7 (aka Lion) came out, the upgrades to OSX belonged to the Mac and not the user. Probably there was a technical legality in the user agreement that you couldn't do that, but everyone did. I could sell a Mac with Snow Leopard (or anything before that) by just erasing the hard drive, and reinstalling OSX. Then ship it to the buyer. Now, I was pretty honest as a seller, and including not only the original installation discs but also any upgrade. I would only sell a Mac if I was replacing it, so I always was getting the brand new version.
With OSX 10.7, upgrading was done online, with no disks. So the upgrades were tied to an Apple ID rather than the machine. Recently, I sold a MacBook Pro (to upgrade to a 27" iMac), which came with Lion. I had promised the buyer that it would come with Mountain Lion, but I didn't know that the upgrade was tied to my Apple ID. I made good with the buyer by sending along a $20 Apple App Store card so that she could upgrade to Lion.
So what everyone is saying here is that you need the original Installation discs or Snow Leopard disk to reinstall and wipe out the Mountain Lion that is on your Mac. It doesn't belong to you, it belongs to the seller, and without his Apple ID and password, you cannot use it. Once you do a reinstall of Snow Leopard, then you can upgrade to Lion and then to Mountain Lion. I do not believe you can upgrade directly to Mountain Lion from Snow Leopard, but I'm not sure.
If the seller claimed that you were getting Mountain Lion, then he was lying to you (or being more civil, maybe he just didn't know like I did). If you bought the used machine from Amazon Sellers or from eBay, then you have recourse through the feedback system or through PayPal. If you bought it any other way, you're on your own.

Problems installing or running Adobe Flash Player for safari

problems installing or running Adobe® Flash® Player for safari when trying to install Adobe Flash Player.pkg it asks to quit Dash Board client then brings up Exclamation mark up and quits install ??????

Adobe Flash is pretty much a 32-bit application. You may be able to fix the problem by going into your Applications folder, and right-clicking on Safari. There is a check box that will allow you to run Safari in 32-bit mode. Try that and see if Flash works in Safari.
I have retired my iMac, and have an HP now, but a friend helped me with the same problem when I upgraded to Snow Leopard. My PC seems to have just one 64-bit browser, that being Internet Explorer. I am using IE9 Beta in 64-bit, and the Beta for Flash "Square" in 64-bit seems to work fine. See link below:
http://labs.adobe.com/downloads/flashplayer10_square.html
Jim

I updated my computer to os x 10.5.8 so I can synchronize iphone with itunes. For some reason computer does not noticed it has been updated. Can anyone advise?

I updated my computer to os x 10.5.8 so I can synchronize iphone with itunes. For some reason computer does not noticed it has been updated. Can anyone advise?

Try what Terence Devlin posted in this topic:
Terence Devlin
Apr 14, 2015 11:21 AM
Re: Is Iphoto gone ? i want it back!
in response to Johannes666
Recommended
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Silent install switches for iTunes 10 for Windows

I want to do large scale silent installations of iTunes 10 for Windows.
I also don't want iTunes it to automatically run, once the install has finished.
I'm using the /quiet /passive switches.
The program seems to install without a problem, but when it tries to automatically run it gives an error message.
Apple Application Support was not found.
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again.
Error 2 (Windows error 2)
I'm not sure how to automatically install Apple Application Support, which would presumably solve the error message problem.

Hi Gold. AppDeploy is probably the place to check, although digging through for the relevant information is going to be a trial. here's a link to their 9.x page, but the other version information from version 7.x may be relevant too.
EDIT: sorry, forgot the link:
http://www.appdeploy.com/packages/detail.asp?id=1644
Message was edited by: b noir

I have Windows 8.1 and just bought the quicktime mpeg-2 playback component for windows and it won't install. I currently have Quicktime Pro.

I need to run Quicktime Pro and playback DVD with mpeg-2 content for school. I just downloaded Quicktime Pro, and purchased the quicktime mpeg-2 playback component for Windows, but I can't download it at all. Is this because my PC is running Windows 8.1?
If so, is there anything I can do?

What do I do?
You actually have several options. However, since you specifically want to use it it with MPEG Streamclip, the easiest approach would be to download the MPEG Streamclip "Beta" package for the Mac which includes a utility app that will help install the QT MPEG-2 Playback component on Lion and later operating systems. Instructions and background info can be found HERE under the "Lion/Mountain Lion and MPEG-2 Playback Component" tab.

ITunes Store for Windows. Everytime I try an access the iTunes Store it takes really long to connect and then it says iTunes store cannot be access. I think I am up to date with iTunes Verizon 11.0.2.26 but no matter what I try it does not connect. HELP P

iTunes Store for Windows. Everytime I try an access the iTunes Store it takes really long to connect and then it says iTunes store cannot be access. I think I am up to date with iTunes Verison, I Have 11.0.2.26 but no matter what I try it does not connect. HELP Please???

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Error while installing Visual Studio Express 2013 with Update 4 for Windows Desktop.

When I try to install Visual Studio Express 2013 with Update 4 for Windows Desktop, I
get the error :
Microsoft Visual Studio Express 2013 for Windows Desktop.The form specified for the subject is not one supported or known by the specified trust provider.
Here is what I get when I use the File Checksum Integrity Verifier (NOTE: I couldn't find the SHA Hash for the .iso I downloaded)
// File Checksum Integrity Verifier version 2.05.
8ab9b5ff10da1c33bb3f088331a7c8d8 vs2013.4_dskexp_enu.iso
Here is some Extra Information:
MY OS: Windows Technical Preview x86ANOTHER OS I TRIED INSTALLING VB ON: Windows 7 Ultimate x86
DOWNLOADED ISO FROM: http://www.visualstudio.com/en-us/downloadsLINK: http://download.microsoft.com/download/9/6/4/96442E58-C65C-4122-A956-CCA83EECCD03/vs2013.4_dskexp_ENU.iso
LOG FILE: http://m.uploadedit.com/b044/1421425243589.txtSHA HASH OF THE RECEIVED ISO: 8ab9b5ff10da1c33bb3f088331a7c8d8
====================================================NOTES:
#I ran the setup as an administrator.
#I do not know the SHA Hash for the ISO so please check if it matches the SHA Hash of the actual file.#Please don't recommend to use the Web Installer.#I tried both extracting the ISO and Mounting the ISO to run the Setup.
Thanks. :D

Solved. The ISO is corrupt.
The SHA 1 Hash of the ISO was 57CF28106EA096758AD6AB909F226A3468D95A49
and the downloaded one returned 8ab9b5ff10da1c33bb3f088331a7c8d8.

Problems installing QuickTime 7 with iTunes 6 for Windows XP

Similar Messages

Maybe you are looking for