Problems installing SBO 2005 B Client (from CD or Server)

Hello,
I set up SBO 2005 B on an SQL Server, applied the latest patches and tried to install the client on some maschines.
After I installed the Client (either from CD or the Server Share) and started it it tries to perform an upgrade which fails with the following errormessage:
"An error has occured while upgrading your application, A full recovery will be performed".
Tried the client installation with local admin rights.
Is there a solution for that?

Hello,
you said you perform an upgrade, so from what and to wahat patch level that you want to upgrade ? Is there a valid license ? what SQL version you are used ?
There is pdf file installation and upgrade in the poduct CD. try to read it carefully.
Rgds,

Similar Messages

Can I install SBO 2005 and 2004 in the same OS(Win XP)

Hi, there
Can I install SBO 2005 and 2004 in the same OS(Win XP)?
Thanks for any help.
Lanjun

Hi Lanjun,
I know you can install both of them together on one computer. I had a document specifying the steps, but cannot find it now. The problem is that you cannot create a new 2004 company or upgrade your 2004 version.
I will look for the document and let you know.
Adele

I have a new iMac but having problems installing final cut express 4 from old macbook pro ?

i have a new iMac but having problems installing final cut express 4 from old macbook pro ?

FCE was discontinued nearly 3 years ago and is no longer supported.
I don't know whether it's possible to install it on Mavericks and if you do it may not perform properly.
Final Cut pro X and iMovie are the only Apple apps that are supported.

Install SBO 2005 SP00 with SQL Server 2005

Hi all,
Can I install SBO 2005 Sp00 on SqlServer 2005 ?
and the addon developed with Framework.NET 1.1 can work under .NET 2.0?
Thank a lot
Dimitri

Hi Dimitri,
SQL Server 2005 is NOT support by SBO 2005 SP0 only SP01 and after
An addon developed with .NET 1.1 should work under 2.0, but I advise you to load .NET 1.1 if possible.
Regards
Ad

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp 4000n.

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp laserjet 4000n.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server

How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server
Thanks in Advance
NTRao

Hi,
There are numerous ways to change the cache size.
You could deploy a vbscript to a collection of the devices.
On Error Resume Next
Dim UIResManager
Dim Cache
Dim CacheSize
CacheSize=20000
Set UIResManager = createobject("UIResource.UIResourceMgr")
Set Cache=UIResManager.GetCacheInfo()
Cache.TotalSize=CacheSize
Or you could use a configuration item.
http://blog.coretech.dk/heh/configuration-items-and-baselines-using-scripts-powershell-example/
You can also use the right click tools by Now Micro on a collection, if all the servers are on this would be the easiest / quickest way.
http://www.nowmicro.com/recast/right-click-tools/
http://www.david-obrien.net/2013/02/how-to-configure-the-configmgr-client/
select SMS_R_SYSTEM.ResourceID, SMS_R_SYSTEM.ResourceType, SMS_R_SYSTEM.Name, SMS_R_SYSTEM.SMSUniqueIdentifier, SMS_R_SYSTEM.ResourceDomainORWorkgroup, SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.OperatingSystemNameandVersion like '%6.2%'
https://msdn.microsoft.com/en-us/library/windows/desktop/ms724832%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396

Problem Installing SCCM 2012 R2 client on Windows Thin PC 7 (Windows Embedded)

Hi, I'm trying to install SCCM 2012 R2 client on Windows thin pc 7
I check the ccmsetup.log and it returned this:
Failed to get list of protected volume: List pointer is NULL (3)
ccmsetup 07/08/2014 08:06:26''
2040 (0x07F8)
DetectEWF failed with 0x80070003. ccmsetup
07/08/2014 08:06:26'' 2040 (0x07F8)
DetectWindowsEmbeddedWF failed with 0x80070003.
ccmsetup 07/08/2014 08:06:26''
2040 (0x07F8)
A Fallback Status Point has not been specified. Message with STATEID='304' will not be sent.
ccmsetup 07/08/2014 08:06:26''
2040 (0x07F8)
Cannot install over embedded OS with WF enabled on the system drive.
ccmsetup 07/08/2014 08:06:26''
2040 (0x07F8)
CcmSetup failed with error code 0x80004005 ccmsetup
07/08/2014 08:06:26'' 1960 (0x07A8)
Can somebody help me?
Thanks
Renzo
PD: Sorry for my bad English

Cannot install over embedded OS with WF enabled on the system drive.
You have to disable write filters on that device first.
Torsten Meringer | http://www.mssccmfaq.de

Problem Installing Oracle 8.0.5 on Windows 2000 Server (SP2)

When i trying to install Oracle 8.0.5 on Windowns 2K Server
(with SP2), after migration from NT4, the process the
installation stop (CD, screen) when load DLLs Oracle, without
msg error.
(I Know Oracle 8.0.5 is pretty old, but...i have).
I'm not sure what the problem is. Any help/commands/how to
would be great? If anybody has any idea of why I am experiencing
this problem, I would appreciate the help.
Thanks,
MJP

Don't install SP2 on Win2k.
Reinstall Win2K without SP2.
Alex.

Install 16 bit Oracle client on Win 2003 server

Hello,
Is it possible to install Oracle SQL* Net 2.3(16 bit) Client on Windows 2003 server. If it is then could someone give me links from where I could get more information on this (like the steps to install 16 bit Oracle client on Win 2003).
Thanks.

the 16-bit applications are not supported by Windows 2003 server x64 edition.
http://support.microsoft.com/?kbid=896458&SD=tech
I have never tried to use 16-bit SQLNet client on Windows 2003 x86. I'm pretty sure that this combination will not be supported by Oracle , athough it could work.
As far as I remember the 2.3 client was shipped with the Oracle 7.3.
here is the desupport notice for Oracle 7
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=66409.1
Mike

Connect Oracle 9 client from windows 2012 server to 9.0 oracle database

I have windows 2012 64 bit with installed oracle 9.0 32 bit client
and i want to connect to oracle 9.0 64 bit server installed on windows 2003 R2 64 bit
Is it possible to make this connection because when i have tried to connect received this error ORA-06413 connection is not open

942609 wrote:
I know that oracle client 9.2.0 is too old but company about i work have tests which run on this systemIf you are stuck using antiquated versions of software, the company really ought to stick to antiquated versions of the operating system as well. Trying to combine versions of the Oracle client that weren't even certified on Windows 2003 with a bleeding edge Windows 2012 system is a recipe for pain and suffering. Even if you appear to get things working, there are any number of bugs that will likely crop up over time due to the massive version incompatibility.
If i understood right i can't make connection between oracle 9.2.0 32 bit client installed on windows 2012 to connect to oracle server 10 i?As others have pointed out, you probably can though you'll need to change the firewall rules. As others have stated, the firewall changes you'll need to make should probably be the same for a 9.2 client and a 10.2 client. But if you're determined to work with highly unsupported combinations of software, you're likely to have to embrace the idea that you're going to be blazing some new trails and that you'll have to spend a decent amount of time debugging issues that arise from your very unique combination.
Justin

Problem installing oracle virtual desktop client 3.2 on debian

Hi,
I have downloaded the oracle virtual desktop client version 3.2 and cannot install it due to unmet dependencies. Has anyone managed to get the oracle virtual desktop client to install on debian stable (wheezy)?
I am running the current debian stable (wheezy) see below.
root@P1155-DEB01:/home/waltersa/Downloads# dpkg -i ovdc_3.2.0-1_amd64.deb
Selecting previously unselected package ovdc.
(Reading database ... 208035 files and directories currently installed.)
Unpacking ovdc (from ovdc_3.2.0-1_amd64.deb) ...
dpkg: dependency problems prevent configuration of ovdc:
ovdc depends on libc6 (>= 2.15); however:
Version of libc6:amd64 on system is 2.13-38.
ovdc depends on libpulse0 (>= 1:0.99.1); however:
Version of libpulse0:amd64 on system is 2.0-6.1.
dpkg: error processing ovdc (--install):
dependency problems - leaving unconfigured
Processing triggers for desktop-file-utils ...
Errors were encountered while processing:
ovdc
root@P1155-DEB01:/home/waltersa/Downloads# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following packages will be REMOVED:
ovdc
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 118 kB disk space will be freed.
Do you want to continue [Y/n]?
(Reading database ... 208052 files and directories currently installed.)
Removing ovdc ...
Processing triggers for desktop-file-utils ...
root@P1155-DEB01:/home/waltersa/Downloads# uname -a
Linux P1155-DEB01 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux
root@P1155-DEB01:/home/waltersa/Downloads# cat /etc/debian_version
7.1
root@P1155-DEB01:/home/waltersa/Downloads#

Ok, i guess there isn't many people installing this software on debian.
Is there any way this message can make it's way to the development team than makes these DEBS?
thanks

Problem calling a EJB Java Client from Java Activity Agent

Hi,
We have a wrapper java class that calls to an EJB through a JNDI lookup. The wrapper class is called from a workflow. The problem is that the call fail with the following message error:
Error : getRemoteHome Lugar: ServiceLocator NamingException Mensaje Error: Receive timed out
Mon Jan 09 15:32:13 EST 2006 Enqueuing VIC/97513 com.tallion.tax.workflow.assessment.Update
F_FN_ERROR (MODULE=com.tallion.tax.workflow.assessment.Update) (ITEMTYPE=VIC) (ITEMKEY=97513) (ACTID=10617) (FUNCMODE=RUN) (ERRMESSAGE=getRemoteHome Lugar: ServiceLocator NamingException Mensaje Erro
The wrapper class has in their classpath a jndi.properties as follows:
java.naming.factory.initial=org.jnp.interfaces.NamingContextFactory
java.naming.provider.url=69.0.137.120:1099
java.naming.factory.url.pkgs=org.jboss.naming:org.jnp.interfaces
The call just works fine when we restart the Java Activity Agent and then, after a while it fails again with the same error.
Any ideas/workaround?
Thanks.

I have a situation that is a bit similar. I have successfully used beans for storing methods used in JSPs and used by other methods in the same class as was suggested above. Now I would like to break some methods into another (utility) class since they are lower level and can be used by lots of things. They are for database operations (given a String query and String dbname, it queries and returns ResultSet for example). I want to have them in a separate class for reusability and OOP.
I am having problems calling those public static methods in the public class from my bean that communicates with the JSP. I can't compile the class that calls the method in the database ops class. I get an error like :
loginHelper.java:45: cannot find symbol
symbol : variable sqlHelper
location: class dbHelperBean.loginHelper
and when I include the package name in the call I get
loginHelper.java:45: cannot find symbol
symbol : class sqlHelper
location: package dbHelperBean
That's strange since the package of both classes is dbHelperBean and the class is indeed called sqlHelper. I tried to compile it in the same directory as sqlHelper as well. What am I doing wrong?
Thanks for any help.

Problem Installing Flash Builder 4.6 from Creative Cloud Suite

Flash Builder 4.6 Premium was downloaded and supposedly installed. However, the only version I could find on my Mac was a previously installed 4.5.1. Can anyone provide any help?

Please try removing Flash Builder 4.5.1 and then try downloading and installing from the Adobe Application Manager. If that still does not work then I would recommend downloading the trial of Flash Builder and entering your Adobe ID tied to your Creative Cloud subscription.

HP ENVY dv6-7246us SSD Upgrade, Problem Installing Windows 7 with boot from usb/dvd disc.

Hello everyone,
I have recently purchased the dv6-7246us and have upgraded the HDD to a SSD. The problem I am having now is that I can't boot from the usb or a dvd disc that contains the Windows 7installation. Originally this laptop had an HDD with Windows 8. I have changed the boot order multiple time to boot from the USB Harddrive and the DVD/CD-ROM disc and still have no luck booting up from the installation. Is there a solution to this problem?
Thanks,
Robert
This question was solved.
View Solution.

Hi, Robert:
Did you go into the BIOS and change it to Legacy Mode?
I believe you need to do that in order to boot from another device other than the hard drive.

How to install OSX 10.6 client in Mac Mini Server 10.7 Lion Server

I am ordering a Mac Mini Server with Lion Server 10.7, with 256GB SSD and 750GB HD. I want to use Snow Leopard (client/workstation) instead. Previously I have already purchased retailed version of 10.5 clients and 10.6 client upgrade. Please advise the best approach from the followings (or more suggestions from you guys...).
(A) The boot disk (likely to be the SSD) will be re-formatted and re-installed by "clean" installation of 10.6 client. But I am not sure whether all hardware drivers for the new Mac Mini (2011) are available in the 10.6 client disk. Also, it seems to me that installation disk of 10.7 server will not be provided. So I shall not be able to re-install server version again if I want to change this Mac to a server sometimes afterwards. Of course I would like to keep this server software for investment protection, no matter I use it or not. If 10.6 client can be installed, I shall use bootcamp to install Windows 7 also. So there will be 2 partitions to be usable aparently.
(B) The factory-installed OSX 10.7 server is kept, and one more partition is created (with Disk Utilties). Snow Leopard workstation 10.6 will be installed at this new partition. If 10.6 client can be installed, I shall use bootcamp to install Windows 7 also. So there will be 4 partitions, including 10.7 server, 10.6 client, 10.7 recovery drive and bootcamp for Windows 7. Since I want to put all OS software at the SSD (faster boot-up and better performance), the drawback is that each partition is with less space.
Do you guys have other ideas or suggestions?
[Background]
In fact I want to make use of its strongest computing power (amongst available Mac Mini computers in store), quad-core CPU & dual disks, to run music applications (DAWs). Operating systems are put at SSD, and data is put at traditional harddisk. As some music applications (e.g. Calkwalk Dimension) only support 10.6 currently, I need to down-grade from Lion server to Snow Leopard workstation. Also I think applications can run faster in a hardware with workstation OS (rather than server version). Please correct me if this belief is wrong.
Thanks / Howard.

If you completely wipe the original Mac mini boot drive you will wipe the Server.app software an dlose it. You should make a backup first, perhaps by saving the entire boot drive as a Disk Image file on to another drive.
In terms of install 10.6, the 10.6 DVD will not boot on the new Mac mini even if you connect a DVD drive. You need to put the Mac mini in to FireWire Target Disk Mode and connect it to an older Mac that will allow booting from that DVD, then install on to the Mac mini (over FireWire), you then need to upgrade it using the 10.6.8 Combo Updater this will add the drivers needed for the new Mac mini.

Problems installing SBO 2005 B Client (from CD or Server)

Similar Messages

Maybe you are looking for