Problems installing second hard drive in HP Pavilion M7-1015dx laptop.

I just bought a new HP Pavilion M7-1015dx. I have successfully installed an SSD drive as the primary hard drive and now I want to use the 1tb hard drive that the computer came with as data and install it in the second hard drive bay. I have a cable that I used from my old HP DV7 when I had a second hard drive but I am having issues with my M7-1015dx laptop.
When I plug the sata cable into the second connector on the laptop and attach my hard drive (I have tried several hard drives) and go to power the laptop on, the power light just blinks a few times. Now I know there is something wrong for I just purchased the laptop two days ago... I got the idea to try the cable that I used to plug into the second connect to check and see if I plugged it into the first and I got the same issue, power light blinking. So I am wondering if it is the cable... is this possible? Are there different rated sata cables? I also tried the cable the came with my new laptop to make sure that it just wasn't the second port - I tried plugging it in to the second port with a hard drive attached and the laptop this time turned on but asked for a bootable disk because it requires boot disk to be in the 1st hard drive bay connection which I knew. I just want to give all the information so that I can get this fixed.
Please help me

Hey Brother-Brad,
I'm sorry you're running into issues installing a second hard drive. Your issue may not be the cable. Do you have a working hard drive installed currently with Window on it?
If so,
1. In Windows, Click the Start button.
2. Type 'hard disk'
3. Click on 'Create and format hard disk partitions' (aka Disk Management)
4. Look at Disk 0 listed at the bottom in the middle. Does it say Basic or Dynamic?
5. If it says Basic, right-click it and select Convert to Dynamic.
Hard drives must be set as Dynamic for dual hard drives to be recognized.
Let me know the results when you get a chance

Similar Messages

Install Second Hard Drive On HP Pavilion DV7-4270us Laptop

Hi,
My laptop has a space for a second hard drive but no connectors. I am using Windows 7 Pro 64-bit and would like to add a second drive in that slot. My main drive is 1TB and I am running out of room. Currently I am using a 1TB external but it is cumbersome when traveling. What must I do to use the second drive?
TIA,
Marty
This question was solved.
View Solution.

Hi Marty,
An example of what you need to use the 2nd HDD bay is on the link below.
http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=345
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Problems installing second hard drive and second DVD recorder

I have tried about every combination of tricks to install a second hard drive. I want to add a 250GB, WD IDE hard drive to my 3000J 115 7387A32 on the IDE channel. I have set up the bios then added the drive and the reverse but cannot get computer to boot in either case. It locks on the first screen where is says hit Enter to.... Enter makes the text go away, but nothing after. I am trying to install it as a single drive on the secondary IDE channel.
I know the HD is good as I removed it from another computer. It does have Win XP on it. I will format it using Vista IF I can get it installed.
Basically, I am having the same problems within stalling the second DVD, which is SATA.

Your initial hard drive should be jumpered as Master. When you install a second hard drive it must be jumpered Slave. There should be a diagram on the case of the HD showing the jumper locations.
Power Macintosh G3 and G4: IDE Master and Slave Support and Configuration
http://docs.info.apple.com/article.html?artnum=24342
Power Mac G4: Installing Internal Storage Devices
http://support.apple.com/kb/HT1815
 Cheers, Tom

What do I need to install second hard drive HP PAVILLION: p6633w

what do I need to install second hard drive HP PAVILLION: p6633w?
This question was solved.
View Solution.

donp815 wrote:
what do I need to install second hard drive HP PAVILLION: p6633w?
Hi,
You need two cables, one is a sata cable:
http://www.play.com/PC/PCs/4-/30305659/706331346/StarTech-com-6in-SATA-to-Right-Angle-SATA-Serial-AT...
This cable is only for data and connects the hdd to the SATA connector on the motherboard.
The other cable is for power:
http://www.itpartsdirect.com/startech-15-24cm-4-pin-molex-to-sata-power-cable-adaptor.html
This connects the hdd to the PSU.
You can also buy a combo cable like this:
http://www.amazon.co.uk/dp/B00064GBT4/?tag=hydra0b-21&hvadid=9550951989&ref=asc_df_B00064GBT4
All you have to do now is to connect the hdd and that's it. Make sure that the primary drive with the operating system is connected to the primary SATA connector (I think there are numbers 1, 2, 3..)
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

What do I need to install a second hard drive in my Pavilion dv7-6b77dx?

I have a HP Pavilion dv7-6b77dx Entertainment laptop and want to install a second hard drive in the second empty bay. I have a 32o Gb drive but I need the cable to hook it up. Where can I find the proper cable?

Hi, you can order the hard drive upgrade kit here:
http://h20141.www2.hp.com/Hpparts/Search_Results.aspx?mscssid=92A6CF5069A84DB8994705680353B526&Searc...
The service guide for your PC is here http://h10032.www1.hp.com/ctg/Manual/c03043778.pdf
-Bryan
I am an HP employee

Question - Need Advice Regarding Second Hard Drive On HP Pavilion dv7t-4100 Notebook PC

Hi,
I currently have a HP Pavilion dv7t-4100 Notebook PC, and my hard drive failed (luckily while still under warranty!). So I contacted HP support and they are in the process of sending me a replacement hard drive, so that I may install it. When I opened the back of the notebook, I realized that a second hard drive could be installed, if desired. I would be interested in doing this! My current primary drive was (and will be again) a Toshiba 1 TB Internal hard drive Serial ATA-300 2.5" 5400 rpm, model MK1059GSM. I understand (from reading a previous post) that for the second hard drive, I will need to purchase a "2nd HDD Caddy & Cable for HP dv7-4000, dv7-5000, dv7t SE" (the purchase link the tech in the other post referred to was http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=345); and now I need to decide on the size (and other stats) of the hard drive that I will buy to install and used as the secondary drive. The HP customer service rep I spoke with on the phone about my primary drive replacement said that it is usually recommended to not go any higher (in capacity) than the primary drive, for the second drive, to ensure a more "stable" system (but I am not sure about the level of"technical" knowledge he has about the inner workings of the notebooks). However, from my upgrading experiences with desktop PCs, I was usually able to go as high in capacity as I could/desired; as long as the physical size of the drive was the same, and it was compatible with my system. And I usually did choose to go with a larger capacity second drive, as this was where most of my data and media files were stored (with the primary being used for mostly operating system and system files). This is my first time "upgrading" a Notebook, so I wanted to check with the techs here on the board- would it be a problem for me to go with a secondary drive larger than my primary drive's 1TB capacity? Also, are there any other factors to consider and keep in mind when selecting a second hard drive? Any advice and replies will be greatly appreciated. Thanks so much for your help with this! -Brian

You should be able to go as high as 2TB.
I also own a,(Older), DV7 notebook which has dual drive capability.
I bought my caddy from the place recommended and got everything needed including screws !
I matched the capacity in mine with an exact same hard drive and have never had a problem.
Minor battery life noticable but that was it.
Your system BIOS is what will hold you back from say a 3TB drive.
You can go to HP site and check the specs on your model and find out for 100 % sure.
HP Support & Drivers | United States
I would recommend doing what I did and match the drive exactly.
Good day !

Can I install second hard drive on PC?

Hi. I just wondered whether I can install a second hard drive on my PC.
The present Sata hard drive has 640 GB capacity.
If there is a spare port for a second hard drive, is there a maximum capcity limit?
And would any make of Sata 3.5" hard drive be suitable? I would be grateful for any advice.
Thanks,
laurencewithau
This question was solved.
View Solution.

Great. Glad to help. One Laurence to another. I do not see my name spelled right ( my way ) very often.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Add a Second Hard Drive to a Pavilion 500-314 Desktop

I have just purchased a Pavilion 500-314 desktop and desire to add a second SATA hard drive from the computer it is replacing. When I open the case I find four SATA connections but nowhere to physically mount the second hard drive. The drive bay is large and basically empty with the included hard drive mounted to the drive bay cage. There are no slots for additional drives. When I called HP I was told this chassis supports only one drive even though it has four SATA connectors on the motherboard. Is there an adapter that can be purchased to create additional slots or am I out of luck with additional internal drives?

Hi,
Few weeks back, one user decided to go to a hardware store to buy brackets himself and problem solved. You may want to follow his method.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Second Hard drive for HP Pavilion dv-7 3157 ca

I am looking at putting a second hard drive into my HP Pavilion dv-7 3157 ca, I know the first hard drive has a maximum size of 500 GB, but as for the second drive can it be 1 TB or is the total of both hard drive 1TB ie: 2x500 GB?
A second question, looking for a link where I can buy the caddy, cable and hard drive, as this model is not common and the info out there is very confusing.
Thanks for any help in this matter.
Cheers

Hi tony2163,
Welcome to the HP Forums! I saw your post regarding your Pavilion. You should be able to install a 1TB drive and I have the part number for Hard Drive Hardware Kit it is 517639-001. For more information about your product and breaking down the notebook go to the link below and click on the Maintenance and Service Guide.
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=4125923&
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Problems installing new hard drive

Hi
I have a HP Pavilion DV6000 (or according the the bios DV6700) and the original hard drive is on the way out, as the machine locks up after a short while of being logged on. I ran the hard drive diagnostics from the bios and it confirmed that there was a fault with the hard drive and i should replace it. I stupidly never made any recovery disks and as the machine locks up i cannot make any recovery disks, so im going to have to do a clean install of Vista from a CD i got from work, and thats where ive hit a problem!
I got a new 320gb SATA drive and booted up the Vista installation but it gets stuck on "unpacking files" then eventually gives up and says "Windows cannot install required files. Make sure all files required for installation are available. Error code 0x8007045d". Ive tried a couple of different discs for Vista but it still comes up with the same message. So i thought if i put XP on it, I could then maybe upgrade to Vista..... No luck there as i got a similar message when trying to put XP on. So i went out and got another hard drive but im still having the same problems!
Has anyone had problems with installing a new hard drive in a Pavilion laptop? Or has anyone got a suggestion how i can get Vista on to a new hard drive? Its really getting annoying now as its something so simple normally!
Thanks in advance

Similar problem. Created an image on a new WD 320gb SATA HDD, then put it in my 9000 Pavillion. All worked great, except when I then tried to upgrade to WIN7 from XP, I got the same error. Turned off all programs, used MSCONFIG to stop everything, but it kept stopping when unpacking the files. Same
0x8007045d error. Tried to put the WIN7 on a mem stick to then move to the HP laptop, but everything copied except a boot.wim file in one of the subdirectories. So I don't think that will work. Couldn't find anything that might help at the Microsoft site.

Problems with second hard drive

I bought my PowerMac G5 new in 2005 and about two years after I got it, I installed a second internal hard drive. I didn't have any problems with the drive until about six months ago (which was when I moved, but I'm not sure if that has anything to do with it). Around that point, I started hearing a single, loud click followed by a slight winding down noise. Then, my computer would almost completely freeze. After a few moments, I would hear a bunch of soft clicks and my computer would go back to normal. I figured that it was a problem with one of the hard drives, but I wasn't sure what to do.
Later on, the problem got more severe, lasting more like 30 seconds. When my second drive unmounted during one of these episodes, I shut my computer down, opened the case, took both plugs out of the second hard drive, put them back in, and started up my computer again. After that, my computer was running great again. But, a few weeks later, the symptoms started up again.
So, I've gone through the same cable un-plug and re-plug process whenever the drive unmounts. Sometimes it helps and sometimes it doesn't seem to help at all. Altogether, I think that the second drive has unmounted about five or six times. I haven't had this problem at all with the original hard drive and I haven't noticed any other problems with my computer. (Well, okay, there's the rare occasion when, instead of going to sleep, it turns the screen black and puts the fans on full blast.)
Could the drive itself be going bad and it has nothing to do with the cables? I have a utility installed that always monitors the SMART status and it hasn't reported any problems. Are there any other troubleshooting steps I should take? Any advice would be appreciated. Thanks!

Before I bought DiskWarrior, I thought I'd try some troubleshooting with the software I have on hand. But while I was doing that, the problem got worse. Now, I'm having major problems just getting the computer to boot. I'll give you the rundown on what's happened. It goes through a few boneheaded twists and turns and goes on at great length, but I thought I'd relate it all in the hopes that someone can see a likely pattern.
My first thought was the Apple hardware test, which I had thought was on the Mac OS 10.5 install DVD. So naturally, I didn't see the hardware test listed under Utilities. But while I had it up, I used Disk Utility to do repairs on both hard drives (checking both the disk and permissions). It found no problems on the 2nd hard drive, but found a few errors with "leaves" on the booting drive. It also found a bunch of issues with the permissions, but I don't think it was anything out of the ordinary.
Just for the heck of it, I asked it to run the repairs again. Not long into that, I got what I think is a kernel panic (overlaid message saying I needed to restart my computer in a few languages). It also sped up the fans.
I pushed the power button to shut it down, then started it up again. I heard the startup chime, then nothing but a black screen and the ol' hyperactive fans. I went through that several times before I was finally able to boot from the DVD again. Then, I changed the startup disk back to my usual boot volume and restarted. I had to go through the black screen and insane fans several more times before I could boot normally.
Next, I thought I'd try OnyX to see what it could do. Which might not be much, but I had it repair the disks again and also had it run the daily, weekly, and monthly maintenance scripts.
I checked into the black screen & hyperactive fans booting problem elsewhere in the forums, and saw that it was recommended to run the Apple hardware test and also found the correct procedure for doing so, which was to insert the PowerMac G5 install disc (not the Mac OS X upgrade DVD) and press Option when booting. I loaded the disc, restarted, and held down the Option key, but before I could get anything to actually load, I had several more sessions with the black screen of fans.
Regarding that boot problem, I've sometimes seen the red light inside the case turn on almost immediately after I turn on the computer. Other times, it will not light up by itself. But, when I hold the power button in to shut it down, the red light briefly turns on before the unit shuts down. I've also noticed that the light on the Caps Lock button is coming on and staying on when I'm trying to start the computer.
So, after several tries, I checked my G5 User's Guide and it said to disconnect any external devices before trying the hardware test. I had a USB thumb drive plugged in and a FireWire drive hooked up for Time Machine backups, so I took both of them out. Once again, I tried starting up with Option held down and this time, it worked. The fans started running at full blast after I selected the hardware test, which I hoped was normal. So, I asked it to run the extended test and it found no problems. I restarted my computer without reconnecting anything and, at least for now, it's working normally.
Any new thoughts?

Possible to install second hard drive in Pavillion p6110f

Is it possible to install a second hard drive, 1TB Seagate, into the expansion slot on my Pavillion p6110f??
This question was solved.
View Solution.

Hi,
Your PC has a hard drive cage that will accomodate two drives. This HP How-to document starting at Removing a Drive a hard drive will show you the process for removing the hard drive cage.
If you still want to use the Expansion Bay then you will need a 5.25" to 3.5" adapter bracket. NewEgg.com would carry such a bracket. You will also need a SATA data cable. This HP How-to article will give you an idea on how to use the Expansion Bay for a 5.25" device. Check up by the existing optical drinve for a spare SATA power connector. If one is not available then you will need to use a SATA power splitter.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Installing second hard drive - boot problem

I have a Maxtor SATA hard drive that I had installed in my G5. It is use only for client project files - no operating system or programs have ever been installed on this drive. It worked great in my G5. I recently upgraded to an Intel Mac Pro and so I pulled the drive and installed it. With the drive installed it won't even boot. All it does is keep repeating the start-up chime. I tried it in several of the open bays and it did the same thing every time. When I pull it back out, it boots without a problem and when I put it back in the G5 it is recognized without a problem. Any thoughts of what could be the problem and solution? I really need to get this back, as I mentioned it contains all my client projects.
Thanks.

Disk Utility - Erase (drive, not volume) and make sure it is now GPT/GUID and not old Apple Partition Table format.
Even though it is data only, there can and are some problems (the older it was last formatted the more so perhaps).
Just pull the data off if needed. Handy to have a FW drive case for SATA laying around.
Migrating OS and apps from G5 to Intel is full of potential pitfalls.
Depending on the drive age, size, performance, I'd probably go for a WD Caviar 640GB $75 to transfer files onto, and then wipe the Maxtor and use it for an emergency backup drive off which you can run Disk Warrior and such.

Second hard drive in a Pavilion 500-300t

I just bought a Pavilion 500-300t PC through the EPP program. I want to install a second SATA hard drive in it, but I can't figure out how or where to mount the second drive. As far as I can tell, there isn't a bay or rack for mounting an additional drive. The primary drive is secured the PC frame. Do I need to buy a separate rack and if so, which one?
Thanks in advance. Retired HP employee

Hi,
It's a special model probably only designed for EPP users. But for many Pavilion 500-300 series, no room to add the second HDD and the specs only says very simple:
Form factor: Microtower
Internal drive bays: One occupied
External drive bays: One occupied
Source: http://m.hp.com/uk/en/products/desktops/product-detail.do?oid=6879020
And not many manuals around:
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/home?sp4ts.oid=6879020&ac.admitted=14108991364...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problems installing new hard drive - pt. 2

Hi there,
I have been using a G4 for years for my music (Pro Tools). I had the standard 29GB hard drive, and I had added a second 40GB drive, and those worked well for me for years.
A few weeks ago, the system started acting up, and it seemed like the 29GB hard drive was shot. So, I got a new one (320GB) and installed it, setting it as Master and keeping the old 40GB one as Slave.
I tried to install both OS9 and OSX on the new drive, but had problems (as chronicled in this previous thread: http://discussions.apple.com/thread.jspa?threadID=2478863&start=0&tstart=0).
After trying a number of things, I finally got 10.3 loaded and seemingly working. Then, I realized my old Pro Tools disc needed OS9/Classic to load, so I looked around for info on if I could load OS9 without disturbing my 10.3. I tried booting to the old OS9 disc -- I didn't actually do anything, like initialize, reinstall, or anything, just looked around to see if it was possible -- and now the 10.3 isn't working either.
Neither the OSX installer, the OSX Disk Utility, or the OS9 Disk Utility seems to "see" the new drive now.
Any thoughts/theories/suggestions on what it might be? Just before the 10.3 installed successfully, I had opened the computer and pressed the IDE cable connections down, just to make sure they were secure. I don't know if that did anything, but it might have.
Now that I'm having problems again, I have of course checked those IDE cable connections again, but the computer still doesn't "see" the drive.
I will remain calm...

Some earlier PowerPC Macs need to have OS X installed on the first 8 GB of the HDD. Mac OS X: Disk Appears Dimmed (or "Grayed Out") in the Installer. I am not sure if that is the case with your computer, but it might be a factor.
On the other hand, if you previously had both OS 9 and OS X installed on the HDD without an 8 GB partition the issue may be elsewhere.
Try this:
Format and Install OS 9
This process will completely erase everything on your Hard Disk Drive. Be sure to Backup your User Folder and all third party apps you can't afford to lose
• Boot from your OS 9 install CD holding down C key.
• Go to Drive Setup and reformat your drive as Mac OS Extended (HFS+)
• Reinstall OS 9
• Update to 9.2.2: Mac OS 9: Available Updates
• Update your firmware
Install Panther OS X 10.3.9
• Boot from the 10.3.x install CD 1
• Go to Installer Menu and open Disk Utility
• (Optional)Go to File menu and Repair OS 9 Permissions!
• Quit Disk Utility.
• Launch Installer
• Select Destination disk for installation
• Click Options
• Select Installation Option Archive and Install
• (Optional) Preserve Users and Network Settings
• Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
• Check box to install BSD Subsystems (Panther & earlier).
• Install Mac OS X 10.3.x
• Restart and Repair permissions (Applications > Utilities > Disk Utility)!
• Download and apply the 10.3.9 Combo Update
• Restart and Repair Disk Permissions as previously!
• Run Software Update and apply all updates available
• Repair Disk Permissions (Applications > Utilities > Disk Utility)!
cornelius

Problems installing second hard drive in HP Pavilion M7-1015dx laptop.

Similar Messages

Maybe you are looking for