Problems installing security update (KB2978128)

Hi. For the past several days I've been trying to install the aforementioned security update and each time it fails. I've troubleshooted the problem to the best of my ability. Tried uninstalling framework 4.5.1 so I can reinstall it but each time I try
to either repair or uninstall I get a message saying that it was unable to uninstall due to a fatal error. I get error code 643 when trying to install the update. Please help this is driving me crazy.

Refer : http://arnavsharma.net/3/post/2014/11/-working-with-failed-or-corrupt-microsoft-net-framework-patches.html
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Similar Messages

What do I do if I am having problems installing Security Update 2012-004?

All,
Howdy. My Software Update fails every time I attempt to install the Security Update 2012-004. I can use the Software Update for other installations. I downloaded the Security Update 2012-004.dmg from the Apple Support site. However, that installation failed as well. Any pointers or tips that I could try?
Processor: 2.4 GHz Intel Core 2 Duo
Memory: 4 GB 1067 MHz DDR3
Thanks.

So, for whatever reason, it seems my last post didn't stick. So, here it is again.
I repaired the permissions several times. I thought that after the first time, there would be no more permissions that needed to be 'repaired'. Perhaps it doesn't work that way. After repairing permissions about 5x, I tried it again, but got the same result as before. I also verified permissions - no change. I took a screenshot of the last permissions that I repaired. Maybe it will help...
Is there anything else you'd recommend?

HT6207 Problems installing security update 2014-002

After automatically downloading the update, the iMac would not shut down. Instead the error message "upapproved caller" appeared. After manually shutting down the PC it would not restart (stuck on grey screen with rotating ring). Starting with the option key, the hard disk was found ok by the disk utility and it has sufficient free space (> 100 gB).
All I could do was restore the last good backup.

I have a similar problem,
I'm trying to install 2014-002 on my iMac 27" late 2012.
Computer reboots and gets stuck with this screen. When I try to click in the menus nothing happens. I had to push the power button for 10 sec to reboot again.

Printing problems after installing Security Update 2015-002

After installing Security Update 2015-002 on three separate computers on two different WiFi networks, printers on the network are losing their connections to the computers that can print to them. We have experienced this on a network running a Canon printer and an HP printer - both have disappeared on the network although the printer suggests it is still connected to the network. The same thing has happened on a separate network I manage with a single HP printer on that network. I have tried removing the printers, resetting the printers etc. Nothing is working. I can get one print out of a printer when I turn the printer off and then on. Three minutes later the printer is no longer connected to the computer - although still connected to the network. Please Help.

I think I have figured out that it is in fact the Apple Extreme Base Station that is losing the printer. It is very odd because the printer is connected to the Wifi. My computer is connected to the WiFi and connecting to the internet. The Router for the internet can see the printer. An Apple Extreme is then connected via a network cable in Bridge mode to the router. When I turned the power off the The Apple Extreme and then restored power it all worked. was still working this morning, but again this afternoon I needed to reboot Apple Extreme. It is quite strange that this is happening on two different Networks in different parts of the country at the same time. Maybe the Security Update is somehow affecting/blocking communication with the printer? I just don't know enough. These networks have been up and running with the same printers and computers for years with zero problems - all of a sudden we have the same problem on both Networks.
Any help will be very much appreciated.

Finder(?) problem after installing security update 2008-008

I hope someone can help with this problem:
After I installed Security update 2008-008 the finder(?) has begun to behave irratically.
Whenever the mousepad is clicked, the dock slides off to the left and the click is not registered by whichever application I am in. Mostly menus are affected. I now have to click the application and menu item several times before the click is registered.
Safari is particularly badly affected with the pointer jumping around the screen when trying to copy an url (dock keeps sliding to the left), page back/forward doesn't work - url links within web pages are not recognised. Furthermore, when using yahoo mail, menus like 'send' and 'save' are not recognised.
Any suggestions how to resolve this problem would be greatly appreciated!
Andrew

HI Andrew,
This is most likely caused by some 3rd part APP or kext that is now out of date.
Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then test your problem there.
Now reboot in regular mode, if the problem didn't happen in Safe Mode, but does in Regular mode, See if there is anything relevant in...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
Also look in in Your Accounts Pref Pane Login Items window.

Problem after install Security Update 2011-003

hi
after after install Security Update 2011-003
i can't open App like mail, safari and more.
any idea
Benny

Process:         Safari [400]
Path:            /Applications/Safari.app/Contents/MacOS/Safari
Identifier:      com.apple.Safari
Version:         ??? (???)
Build Info:      WebBrowser-75332101~1
Code Type:       X86 (Native)
Parent Process: launchd [212]
Date/Time:       2011-06-01 02:54:16.134 +0300
OS Version:      Mac OS X 10.6.7 (10J869)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
Reason: no suitable image found. Did find:
          /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore. framework/Versions/A/WebCore: truncated fat file. file length=12320768, but needed slice goes to 35270944
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <39AC3185-E633-68AA-7CD6-1230E7F1CEF4> /usr/lib/dyld
q

I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002. I don't know if related. A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar b

I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002. I don't know if related. A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar back?

Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Just installed security update 2014-002, now Itunes will not open. Have rstrated but no change, need help to fix, please

Just installed security update 2014-002, now Itunes will not open, I have rebooted twice with no effect, I don't know what else to do to get my itunes back. Need help please

Believe I've firxed my problem, at least, ITunes is now working again. I followed the information provided from a couple of posts on this thread, (1) re restarting with command-s held down; did it twice, made no differerence; (2) manually re-installed the Security update; no difference; each time restarting, no effect; (3) shutdown the computer; I did for 35 minutes, upon restart, ITunes is back to normal, seems to be working fine. Turning the computer off must clear the cache?

Airport Problems after Security Update 2007-004

Ever since I've installed Security Update 2007-004 my Airport connection has been dropping about every 15 to 30 minutes. Sometimes Airport will stay connected but will stop working until I renew my DHCP lease (I get the same IP though). When it drops I click on the Airport icon to reconnect but my network doesn't always show up. Sometimes I have to turn Airport off and back on again to make it show up, and a few times I've had to reset my computer to make it show up.
I have a MacBook Pro with an 802.11n card. I'm using two different routers; one at work, and one at home. The work router is a Linksys N router while the one at home is a Linksys G router.
I've tried all the tricks. Repairing Permissions, deleting the extension caches, installing the standalone updater, but nothing is working.

Deleting AppleAirPort2.kext solved the problem for some...
http://discussions.apple.com/thread.jspa?threadID=934370&tstart=0
While others had to rollback the AppleAirPort.kext to version...
http://discussions.apple.com/thread.jspa?messageID=4310165&#4310165
Installing the Security update 1.0.1 from 5/01/2007 helped others. Reapplying the Combo Update again helped a couple of people.

All application slow to molasse after Installing Security-Update 2010_007

After installing security update, ALL applications, all commands in X11 had response times ALL key strokes of the order of seconds to minutes with >93% of system CPU idle. Console displays the message below ever 60-70 seconds.
11/11/10 4:25:36 PM updatedyld_sharedcache[12] for arch=i386 failed: read failure copying dylib errno=5 for /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib while copying /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib to shared cache
The solution is a modification of this link
http://www.macosxhints.ch/forums/showthread.php?t=15517
Basically, the offending file /System/.../LibLAPACK.dylib is moved from the system directory to a current directory, e.g.,
sudo mv /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib .
and then back to the original directory, e.g.,
sudo mv libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
Problem solved without reboot as system immediately returns to normal. Why would a security update from Apple cause this?

Andreas, do you have this info in english? I'm having a similar problem, and I want to see if I can solve it; or could you tell me what you did to solve it?
Here's the message I'm getting every minute from the console:
updatedyld_sharedcache[1461] for arch=i386 failed: read failure copying dylib errno=5 for /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics while copying /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics to shared cache

Installed Security Update 2013-003 & now cannot see video

Installed Security Update 2013-003 & now cannot see video.
Snow Leopard.
Corrected problem by updating Adobe Flash~ even though I just updated it two days ago~ but that solved the problem.
Message was edited by: Black Cat Prowl

Welcome to Apple Support Communities
Security Update 2013-003 is available for Snow Leopard, Lion and Mountain Lion. You can download the Snow Leopard version > http://support.apple.com/kb/DL1670
You don't have enough space to install the update, so you have to delete things from the hard drive or move them to an external drive. See > http://thexlab.com/faqs/freeingspace.html

Eudora crashing since installing Security Update 2010-001

Eudora has been crashing 100% of the time since I installed Security Update 2010-001 for Leopard.
Is anyone else having this problem? Any suggestions for a resolution?
Thanks.

I see that, like most others, you prefer IMAP. I have used both but I prefer POP. Mixing them on one client can have unfortunate consequences. I don't like any sort of web interface to mail. IMAP is very useful if you need portability but I contend that POP can be more secure if used as I do:
I access each account from time to time from more than one computer. Each computer acts as mail backup for the other as long as I remember to use each within my 122 day (4 month) setting. Since the computers are at different locations I have good protection from fire, disk failure or any other failure of my computers. A corrupt ISP employee can only access my emails for the last 4 months. To easily keep both clients the same I have a simple flat folder structure - one folder for each of the last 10 years.

Applications crashing after installing security update 2010-003

Hi all, anyone else having this problem (and found a solution)? After installing security update 2010-003 on snow 10.6.3, entourage, firefox, and even itunes are crashing at launch. Safari seems stable, but haven't tried other apps yet. Verified permissions on my boot disk and repaired it but the problem persists. It started after rebooting after installing the security update. I'll reinstall the OS if needed but hoping this is a bug someone has solved. Thanks!

http://www.thexlab.com/faqs/multipleappsquit.html

Problems installing Security Pack

I have problems installing Security Pack on SuSE 9.2 Pro (with
update-patches):
bgnl2:~/install/tarantella4 # chmod u+x tspi3li.shx
bgnl2:~/install/tarantella4 # ./tspi3li.shx
Tarantella Secure Global Desktop Enterprise Edition
Setup is verifying the shx file...
Setup is checking for disk space requirements...
Secure Global Desktop Security Pack for Intel Linux kernel 2.4+
Preparing for installation...
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/ttasecure_inst.log, and then try
again.
bgnl2:~/install/tarantella4 # cat /tmp/ttasecure_inst.log
===========================================================================
Starting Setup
===========================================================================
9+0 records in
9+0 records out
===========================================================================
Installing package <ttasecure>
===========================================================================
2+0 records in
2+0 records out
Pre-request detail for package <ttasecure>
---> ttasecure.prerequest
498+0 records in
498+0 records out
Extraction detail for package <ttasecure>
Transferring <ttasecure> package instance to
</tmp/ttainst_4/ttapkg.19811/pkg> in file system format
Install detail for package <ttasecure>
PROCESSING:
Package: Tarantella Secure Global Desktop Enterprise Edition
Security Pack for Intel Linux kernel 2.4+ (ttasecure) from
</tmp/ttainst_4/ttapkg.19811/pkg>.
Tarantella Secure Global Desktop Enterprise Edition Security Pack for Intel
Linux kernel 2.4+ (i386) 4.00.903
Using </> as the package base directory.
Tarantella, Inc.
ERROR:request script did not complete successfully
Installation of Tarantella Secure Global Desktop Enterprise Edition
Security Pack for Intel Linux kernel 2.4+ (ttasecure) failed.
No changes were made to the system.
Script detail for package <ttasecure>
---> request
<--- request
What can I do to fix this?
Thanks in advance!
Jakob Breivik Grimstveit

Each of the two security updates for Yosemite required a restart once the update had been installed. Did you in fact perform these restarts?
If you are in doubt, go to About This Mac (under the Apple logo in the Menu Bar). Then choose System Report > Software Installations [requires scrolling way down on the leftmost column] > [look for security updates to be logged there]

Problems with Security Update 2006-002

Hi there,
I have problems with latest security update. I do not know what went wrong, but after installing "Security Update 2006-002 (PowerPC)" (1.0) on 2006-03-14 15:52:40 +0100: with Software Update from Tiger, my desktop (and probably not only desktop) is damaged.
The most visible thing is that all .html and .htm documents on my desktop does not have Safari icon anymore, they have some 'blank' icon and doubleclick on them DOES NOT start-up Safari, why?
See here on the screenshot: http://www.jirkacech.com/files/Tiger-problemy-screeshot.png
note blank "apple - start.webarchive" also the Safari itself have somehow damaged icon, to same blank thing with triangle, possibly some 'generic app' or 'default.app' icon. It sits in the dock on 5th from left...(dont worry about real safari icon, that's newly added by me)
Also, on, second screenshot, http://www.jirkacech.com/files/Tiger-problemy-2.png you see that safari itself have some strange icon.
I am getting crazy, since I do not know what else is broken by last update.
I have tryed to repair permissions at least 3x, and also run update_prebindings and reboot, delete all system and user caches, and reboot.
Whole issue is system-wide, not only for one user.
iBook G4 Mac OS X (10.4.5) 1.33 GHz, 512 MB, 12-inch

The first thing you can try, if this is limited only to Safari icons, is to select on such icon, then press COMMAND-I to open the Get Info window. In the Open With section select Safari from the dropdown menu as the default app. Then click on the Change All button.
If this doesn't resolve the problem or if the problem extends to other appicons as well, then you may have some disk corruption resulting from not repairing the hard drive and permissions before doing the update. I suggest you do that:
Boot from your Tiger DVD. After the installer loads select Disk Utility from the Utilities menu. After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Problems installing security update (KB2978128)

Similar Messages

Maybe you are looking for