Problems installing Tiger on 700mhz iMac

Hi - I think I have the answer, but wanted to double check with the forum experts!
I have a. I'm trying to install Tiger (that came with the next generation iMac), but when it starts up from the Tiger install disk (using external DVD drive), I get the "screen of death" (ie: black screen with giberish and a gray circle in the center).
I take it that my copy of Tiger is not retail and specific to my newer mac only? And that is why I'm getting this message?
Are there any copies to purchase for my older iMac? Thanks in advance for any help!
Mike

Hi jt202,
This forum is specifically for advice on the old G4 (Flat Panel) iMacs. Your problem seems to be related to using the iPhone. I suggest you repost in the iPhone forums.
EDIT: I see you already have.
mrtotes

Similar Messages

Problems installing Tiger onto G3 Imac - please help!

hi all.
i've tried to install tiger onto a g3 imac but i'm having some problems.
basically, once i've inserted the install dvd and restarted, the screen is either totally blank or it's very very dark and the desktop is sliding off to one side, plus the text and icons are blurred.
i checked that i didn't need to update the firmware first, and the computer said that i didn't need to.
does anyone have any idea what i can do? i don't have the original OS9 install disk any more and i'm starting to panic ...
thanks in advance
ibook g4 Mac OS X (10.4.5)

Jon,
Not to be silly but do you you have DVD capabilities? Not all G3s (mine included) have DVD drives. Is the firmware 4.1.9? What is your machines specs? Do you have enough ram, hard disk space?
I haven't read about these types of going ons, however on the Tiger OS X.4 discussion board Gulliver has an excellent check list/ decision tree.
http://discussions.apple.com/thread.jspa?messageID=607363
You may want to check that out as well as reposting your topic on the Tiger board.
Sorry I couldn't help more than possibly pointing you in the right direction.
Good luck,
Lee

Install problem with tiger on an imac g5

Hi,
I just purchased tiger for a powermac, and on this website it states that it will work on my imac g5.
When I try to install Tiger on my imac it tells me it cannot install on this computer!! the website says it can, im getting annoyed with it telling me i can't!!!
my Mac fits all the requirements, the only thing i can think of is that i upgraded my memmory to 1gb, could that cause a problem installing??
someone please help me, i need tiger!!!!!
jon
imac g5 Mac OS X (10.3.9)

Hi macmanjon;
What is the URL of this web site?
It sounds like they sold you a model specific set of install media that is not compatable with your hardware. I would try and see iuf you can get your money back.
Allan

Installing Tiger to a iMac G3-700 SE

Hi everbody,
Recently purchased a DualCore G5 2GHz. Awesome machine. It came with pre-installed Tiger OS. I'd like to upgrade my older computer as well. Therefore I have a few questions, all help is highly appreciated.
1: Can I install Tiger to an iMac G3-700? Or is there a minium hardware requirement?
2: I assume Tiger installer CD is a DVD-Rom. Therefore my iMac was not able to read it. Is there any other way to use the installer CD toward older computers without DVD reading capabilities? What if I cpoy the installer CDs to an externa hard drive, can I run the install from there?
3: Do you think an iMac G3-700 (512mb ram) would be too slow on Tiger OS?
Thanks in advance!

Mac OS X Version 10.4 requires a Macintosh with:
PowerPC G3, G4, or G5 processor
Built-in FireWire
At least 256MB of physical RAM
A built-in display or a display connected to an Apple-supplied video card supported by your computer
At least 3.0 GB of available space on your hard drive; 4GB of disk space if you install XCode 2 developer tools
DVD drive for installation (get CD media for $9.95)
The Tiger retail install package and the Tiger install package that ships with a new Mac purchased is on DVD media.
The Tiger install package that ships with a new Mac purchase is model and system configuration specific and cannot be used to install Tiger on another Mac model. If this were possible, it would be a violation of the single user license agreement that you agreed to and against the law.
If your iMac meets all other minimum system requirements except for having a DVD drive, purchase the Tiger retail install package and if the iMac is capable of Firewire Target Disk mode, you can connect your old and new Mac together this way to install the Tiger retail install package on the iMac.
If not, you can use Apple's Media Exchange Program to exchange the Tiger retail DVD media for CD media.

Problems installing Tiger on G3

I am having troubles installing OS X (10.4) on our G3 Desktop (Blue and White). The G3 has almost all original hardware, including built on firewire. Things added were a DVD Drive from a G4. It meets all the required specs for Tiger. It has all the latest updates and firmware upgrades. And the version I am trying to install is a generic OS X Tiger Installation Disk, for multiple computers.
When inserting the DVD on bootup, the display never comes out of powersave mode. If I start the system without the DVD in the drive, it boots into OS 9.2.2 just fine. Then if I insert the disc it pulls up the contents, I click on the installer and it says click Restart to begin the installation. Again it tries to boot but nothing ever shows up on the screen. I can hear the DVD drive spinning up about 30 seconds after restart, but nothing ever happens.
I've tried holding 'C', I've tried selecting it as a startup disk from within OS 9. I've even tried to install over the network, but everytime it tries to bootup the installation, the screen never gets a signal.
If you can please give me some suggestions I would really appreciate it!
G3 Desktop Mac OS 9.2.x

Hello there...i have a problem installing tiger 10.4.6 ....cd boots ok and all; and it starts installing and all..... but at the very end it gives me this "there were errors please try to install again" (and of course i tried like 1000 times....actually 1001)the software is original and the computer meets the minimum requirements....now ...do i need to go ahead and install the very first os x and then this one? and how do i use the Diagnostic at boot up? (i'm new at Mac and don't know much) any help would be Highly appreciated...Best of Luck everybody!!!

Problems installing tiger on old mini

I have a old G4 1.25 mini which I have upgraded the RAM from 250 to 1 GB (third party RAM) . Have tried to install tiger (disk from my imac G5) and been unsuccessful. I have done some research and found information that states if you have installed 3rd party RAM future upgrades of OS maybe unsuccessful.
I have read some other posts that have stated if you use "apple store" bought tiger or leopard it should install no problem. I haven't purchased anything yet as I dont want to waste my money.
Does anybody know if I will be able to install tiger or leopard if I buy it from the apple store? Please help because now i cant even get my hotmail account to work on 10.3.9!

The machine-specific OS X disks won't load on another system, as you've found out. You need the store/Apple bought version.
All RAM is 3rd party RAM, as Apple doesn't manufacture their own memory. They do use Crucial/Micron and Samsung, amongst others. What's important is the quality of the RAM ... sometimes el cheapo RAM, while meeting the Apple specs, may not work so well.

Can I install Tiger on my iMac slot loader running OS 8.6?

I'm keen to upgrade my iMac DV bondi blue slotloader running OS 8.6 to Tiger so I can take advantage of wireless networking. Do I need, say, OS 9 first? or can I just go to Tiger directly.
Also - does anyone have experience of putting a new OS on an old machine - is it actually worth it or am I asking for trouble?

Hi Macnabbs,
yes, you can install Tiger on your computer. However, you will have to upgrade to at least 9.1 (better 9.2.1: ) before that, then upgrade your firmware and install at least 256 MB RAM (better: 512 MB). Also make sure you have at least 5 GB of free hard disk space! MacOS X needs a minimum of 1.5 GB of free hard disk space at all times in order to run properly.
The short version goes like this:
0. Confirm your Mac meets the minimum hardware requirements: Built-In firewire, 256 MB RAM (512 MB recommended), 5 GB free hard disk space (System Requirements)
1. Update to 9.2.x: Mac OS 9: Available Updates
2. Upgrade your firmware: Mac OS X: Chart of Available Firmware Updates
3. Download the Mac OS X Update 10.4.5 Combo update: Mac OS X Update 10.4.5 Combo
4. Unplug all peripherals but the original Apple keyboard and mouse.
5. Install Tiger
6. Repair permissions before and after an update!
7. Apply the 10.4.5 Update
8. Repair permissions before and after an update!
9. Run software update from the Apple menu.
10. Repair permissions!
Keep the order!
If you cannot select your hard disk as a destination volume and your computer is quite old this article might help:
Mac OS X: Disk Appears Dimmed (or "Grayed Out") in the Installer
Good luck!

New Problems in Tiger Classic (or iMac G5)

Hi folks,
I have the last version of Managing Your Money ever released and we have always been able to use it in Classic without any trouble at all. However, since we got Mac OS 10.4 (or maybe is was since we got the iMac G5; since they were nearly simultaneous, I'm not sure) MYM and/or Classic seems to display symptoms of a memory or other resource leak. That is, every window I open takes longer to open than the last one. Eventually, the program becomes practically unusable and I have to restart. If I keep using it without restarting, the iMac will eventually freeze and the force quit window won't even appear.
We have never had this problem on previous versions of OS X, nor on previous models of iMac (we've used OS X with classic on two different G3 iMacs and a G4 iMac).
Does anyone know of any differences that should be significant? Are there any Classic extensions that are known to have problems in Tiger or on G5 iMacs?
Sincere thanks,
Bill
iMac G5 20 inch Mac OS X (10.4.6)

I don't know MYM does it make no difference if you allocate more memory to it with file>Get Info>Memory, please?
My own G5 runs classic exactly as my older G4 does, and since my configuratin is hardly likely to match yours, what does that prove?
If it was my Mac, I'd copy the Classic System Folder, set the copy in Classic System Preference, set its Extension Manager Set to Mac OS (Base) then Restart Classic and reinstall MYM, which should now have nothing to interfere with it…

Problem installing on my new iMac

I have an ugrade version of Photoshop Elements 10/Premier Elements 10. I have recently changed from a Windows based machine to a new iMac. I obviously do not have my previous software installed on my new iMac. I suspect that there may be a problem to install my software for that reason, but in addition, I get the following error messages:
Exit Code: 7
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW006, DW050 ... WARNING: DW031, DW036 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 7 error(s), 7 warning(s)
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Smartsound3: Install failed
ERROR: DW050: - Photoshop Camera Raw for Elements 10: Install failed
ERROR: DW050: - Smartsound1: Install failed
ERROR: DW050: - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Premiere Elements 10_LangPacken_US: Install failed
ERROR: DW050: - Smartsound2: Install failed
How do I install the software on my new computer?
Confused in Napa
Don

Hi dr_dmd,
Please try renaming the folder : /Library/Application Support/Adobe/OOBE to OOBE_old
After renaming unstall the PRE and PSE completly from /Applications/utilities/Adobe Installers and then try to install.
If still you face the same problem then please let us provide the list of Adobe software which are installed on your computer.
Regards,
Jatin Dembla

Problem installing software on new imac

I am using a new imac and i tried to instal the software. It seemed to work with disk 1. I skipped verifying the disk though. Disk # 2 i will try to install. It will look like its finishing but then it will say problem instaling software. Please try again. I have tried it 2 times already. PLEASE HELP!!!

Let me see if I have this straight.
You are simply trying to install Mac OS 9.2 from disc 2, correct?
What happens when you insert the disc?
Does it mount on the desktop?
Do you receive any errors?
Are you able to double click the install classic icon?
b I am using a new imac and i tried to instal the software. It seemed to work with disk 1.
So you were trying to reinstall the system software from disc 1?
Was this an upgrade of the software or a reinstall of what came with your computer?

Trouble installing tiger on an iMac DV+

I tried installing new Tiger software on an iMac DV+. When I click on the Install Mac OS X icon in the installation folder, I get the following message: "Mac OS X cannot be installed on this computer. Please consult the documentation for the list of supported computers."
My computer should be supported. I'm currently running OS 9.0. I found some info online that said that I have to upgrade to 9.1 and then do a FirmWare update 4.1.9 before I can then install Tiger. Well, I upgraded to 9.1 and then tried to do the FirmWare update, but I think the Firmware update will only work if you have a CD for it in your CD/DVD drive.
Does this all sound right? Do i really have to get a FirmWare disk before I can do all of this? It sems so circuitous and roundabout. I'll spend more money, but I want to be sure first.
Can anyone help me?

You do not need a firmware CD to run the firmware updater on your iMac.
(15856)

Need to install Tiger on my iMac and computer won't boot

I've recently had to wipe and format my Intel based iMac (20" intel based iMac, Emc 2133) and am unable to install Tiger from any of the disks. The computer will not boot past the grey screen at start up. The optical drive has just been replaced and is working correctly and pressing C at start up while disk is in is not working either.
Any suggestions?

So what exactly happens when you put your install disc in and try and boot up holding the "C" key? I know you said it doesn't work, but does it just bring you back to the gray screen?
What happens if you boot while holding the Option key? Does it at least get you to the startup manager (aka boot picker)? It should at least do that, since that operates from firmware and should come up regardless of what shape the hard drive is in.
It is difficult to pinpoint the issue here but you might even be looking at a bad logic board judging by firmware operations not working.

Problems installing Tiger on the Beige G3

I have a rev A Beige G3 with a sonnet 500MHz G4 upgrade, a pioneer DVD RW drive and the original 6gb hard drive.
I am trying to install tiger, but I'm having problems. I can insert the disk and it will show up fine on the OS9.2 desktop, but when I launch XPostFacto 4.1, it says that the symbolic links to /etc, /tmp and /var and missing or damaged. But the DVD works fine in OSX 10.0 on the beige, and in 10.4 on a Sawtooth.
I would have tried using Jaguar to run XPostFacto, but I have too many problems with the monitor switching off during the installation, so I decided not to bother.
Does anyone know what I should do?
Thanks
Steve

i got tiger running almost 100% but not quite cause tiger refuses to work right with my pioneer dvr-110D. other than that tiger is running great. i had to do the video black out fix for 10.2.8 for tiger cause tiger would do the same thing.
sorry for not having a quick link to the fix cause im on my other Beige G3 AIO and i dont have it bookmarked.
what i did was get tiger 10.4 installed, then proformed the fix and rebooted and the onboard video didnt come on. this is where a second video card comes in handy ( wich i have a Radeon 7000 i use as main screen. then i installed the 10.4.7 update and rebooted and the onboard video started to work again and all has been well since with the video.
now the pioneer DVR-110D drive didnt work hardly at all in 10.4 or 10.4.7 it would not mount unless i booted with a disk in the drive. but still then even tho it was mounted it would not work or play dvd movies or audio cd's or burn disk's.
i updated to 10.4.8 and the drive will still not mount unless i boot with a disk in the drive. but when a disk is mounted it will play dvd movies and audio cd's but it still wont burn disk's ( some times it will burn half way but fail) and some times will stop working during dvd movie playback and audio cd playback.
now in OS 9.2.2 with the modded Pioneercdr authoring extention i can burn disk's with iTunes and the built in burn program. and will burn flawlessly with toast titanium. the drive also worked great in OS X 10.2.- 10.2.8 and have burn ability with patchburn installed
tiger on the other hand will not play nice with my drive. but other than that tiger run's great on my system. the spec's of my system are in my sig

Problem installing windows 7 on imac 27" i7 mid 2011

I myself have a 27" i5 mid 2010 model but a friend of mine recently got a 27'' i7 he wanted to instal windows 7 because he also uses other software aswell
Specs of his iMac 27'' :
Thunderbolt
HD Facetime Camera
4gig of memory
2gig videocard
1T HDD
OsX 10.7 Lion completly updated
Oke here is my and his story/problem:
I start bootcamp download the software i need too install bootcamp on windows 7 Ultimate.
After that i create a partition 200 gig for windows 7 Ultimate. i click on the button to start the install.
After the restart i press enter and the windows setup starts after some clicks i format the bootcamp partition as explained by apple in there support.
I click on install windows start to install after the first boot it wil compleet the install normally this wil install the drivers and you get normal resolution ect,
this doesn't happend. It keeps the big chunky resolution. so that tells me that the drivers aren't installed.
After windows compleets the installation it restarts does a video test, and brings us to the screen where you need to fill in your name and password then windows asked a few things and the world time ect, and when you click on done or compleet. Normally you will get something like this (Please wait a moment windows is preparing your desktop) instead of that the mac restarts, (but the windows dvd is still in the superdrive because you cant get it out) it asked me if i want to press a button to instal windows no i wont, so i wait it counts down so it wil start up windows. now here is the problem it doesnt startup to windows it hangs and does nothing.
I my self have a mid 2010 27'' i5 model and had a blank screen everytime i tryed to instal windows 7 ultimate, i learned that there was a download available where you can create a MBRFAT USB stick where you copy a .xml file and a driver map so windows got the right drivers for my model so it would install succefully,here a link http://support.apple.com/kb/TS3173 where i found it.
Is there something like this available for the
iMac 27'' model mid 2011
with a 2gig videocard
Thunderbolt
HD facetime camera
4gig memory
10.7 Lion
Any help or links would be nice

Oke we are still fighting with this after finished installing windows 7 hangs problem!
My question now is can this problem as mentiond above be caused by plugged in USB devices he also uses a world of warcraft mouse and a logitech keyboard G19 version that can be used with world of warcraft.
He also he got a Sitecom powered USB hub 10 port, and uses 2 WD elements external USB HDD 2Terra connected to the hub that uses 1 port on the mac the other 2 on the mac are the keyboard and mouse that he uses for world of warecraft and there is 1 left on the mac that he uses for his iphone or usb stick.
We are also looking for the new drivers for the i7 mid/late 2011 models so that have a AMD Radeon HD 6970M with 2 GB GDDR5 installed so windows can be installed correctly?
Thanks for any help on this matter..

Problem installing windows 7 on iMac i7 mid 2011

I myself have a 27" i5 mid 2010 model but a friend of mine recently got a 27'' i7 he wanted to instal windows 7 because he also uses other software aswell
Specs of his iMac 27'' :
Thunderbolt
HD Facetime Camera
4gig of memory
2gig videocard
1T HDD
OsX 10.7 Lion completly updated
Oke here is my and his story/problem:
I start bootcamp download the software i need too install bootcamp on windows 7 Ultimate.
After that i create a partition 200 gig for windows 7 Ultimate. i click on the button to start the install.
After the restart i press enter and the windows setup starts after some clicks i format the bootcamp partition as explained by apple in there support.
I click on install windows start to install after the first boot it wil compleet the install normally this wil install the drivers and you get normal resolution ect,
this doesn't happend. It keeps the big chunky resolution. so that tells me that the drivers aren't installed.
After windows compleets the installation it restarts does a video test, and brings us to the screen where you need to fill in your name and password then windows asked a few things and the world time ect, and when you click on done or compleet. Normally you will get something like this (Please wait a moment windows is preparing your desktop) instead of that the mac restarts, (but the windows dvd is still in the superdrive because you cant get it out) it asked me if i want to press a button to instal windows no i wont, so i wait it counts down so it wil start up windows. now here is the problem it doesnt startup to windows it hangs and does nothing.
I my self have a mid 2010 27'' i5 model and had a blank screen everytime i tryed to instal windows 7 ultimate, i learned that there was a download available where you can create a MBRFAT USB stick where you copy a .xml file and a driver map so windows got the right drivers for my model so it would install succefully,here a link http://support.apple.com/kb/TS3173 where i found it.
Is there something like this available for the
iMac 27'' model mid 2011
with a 2gig videocard
Thunderbolt
HD facetime camera
4gig memory
10.7 Lion
Any help or links would be nice

You should probably re-post in the Boot Camp forum.

Problems installing Tiger on 700mhz iMac

Similar Messages

Maybe you are looking for