Problems Installing Updates from WSUS - Error Code 0x800f0826

Hi Everyone,
I have a WSUS server that I am using to dish out updates to the rest of my network. I am using PC's with Windows Vista SP1. Most of my PC's are installing updates fine with no problems - but there are a certain few that will not install any updates and return the error 0x800f0826.
All of the PC's are from the same image - so there is nothing different in the software setup that I am aware of.
I have been browing the net for ages, and have tried a few fixes - for example:
Starting Various Services and Setting to Automatic - No Luck
Renaming the SoftwareDistribution Folder - No Luck
Checked update history for failed updates and unassigned potential problem update - No Luck.
I am running out of ideas now - can anyone help?
Thanks
Matt

Install System Update Readiness Tool
Once you installed SUR Tool, run below commands
DISM.exe /Online /Cleanup-image /Scanhealth
DISM.exe /Online /Cleanup-image /Restorehealth
Downlod System Update Readiness Tool from below link
http://windows.microsoft.com/en-GB/windows7/What-is-the-System-Update-Readiness-Tool
Refer : http://www.thewindowsclub.com/checksur-system-update-readiness-tool
Refer below link for analyzing log and further troubleshoot :
http://www.sevenforums.com/tutorials/108805-system-update-readiness-tool-checksur-log-file-analyzis.html
Regards,
Manjunath Sullad

Similar Messages

  • Problem Dowloading Songs From iTunes (error code 8248)

    I recently purchased an ipod touch and it seems that now when i try to purchase certain songs (I kissed a girl, addicted by saving abel) it downloads them all the way to the point where it says "processing file" and then either says iTunes has encountered a problem and needs to close, or error code 8248. I have consulted with an apple rep about this problem already and they attempted to reimburse me for my lost money and that didnt even work. So now im out a few dollars and i still cant dowload these songs. I greatly appreciate any help or even any ideas you can give me.
    iTunes is up to date
    I have downloaded and re-installed itunes and it didnt help
    Cleared the temporary internet files
    Tried dowloading it using my ipod touch and it dowloaded and it showed up in my playlists but when it comes time for that song it just skips it or wont play at all

    Hey!
    I've also been having problems with the error 8248, and every time I think I get it worked out, it rears its ugly head again.
    It first happened after I performed my last iTunes update, as someone else mentioned. It was during a multiple download, a bunch of songs went thru fine and then a few were flagged with the 8248. I was initially credited twice, tried some troubleshooting & reconfiguring each time per the helpful iTunes rep's suggestions to no avail.
    Then, I searched the internet to find a solution, came here & saw the suggestions.
    So far, I've removed VCast & Spybot, turned off both my Symantec & my firewall...with an unsuccessful attempt (and subsequent re-credit to my acct) between the VCast step & disabling my firewall.
    I did successfully download 10 songs after I disabled my firewall, so I assumed the problem was solved. Then I tried to use my credits for the 5 remaining songs from the original download and the whole batch got an 8248 error. Well, my son was on his computer at the time, which shares my connection, so I eliminated that variable (not my son, just the computer use ;^) and tried again this morning...no luck.
    WHAT is left to do? Why will it work sometimes and not others? And HOW can I talk to a real, live person to troubleshoot this?! Going thru e-mails has been extremely frustrating, not to mention taking a very long time between attempts.
    I have 2 kids just itching to use their birthday gift cards, to boot!
    HEEEEELLLLLLPPPPPPPPPPPPP!!!!!
    <argh!>

  • Problem installing updates - proxy setting error

    Every time I try to install java 1.5 updates, I get an error message saying "Installation cannot proceed with current proxy settings". I have referred to the installation guide which tells me that if I can get to the web outside my firewall my proxy settings are OK. In addition, there is nothing checked in my proxy settings in IE. I went through diagnostics with my ISP and they couldn't find anything wrong. I have tried to contact Sun but have gotten no answer. Anybosy have any ideas?

    I solved the problem. Apparently Norton Firewall automatically blocks java SDK downloads. For anbody getting the proxy setting message, check your firewall settings. It does seem like Sun could give a more accurate error message.
    Mike

  • Having problem installing Adobe Extension Manager 6.0.7 update. Received Error  Code  U44M1P7.Help?

    I am having a problem installing Adobe Extension Manager 6.0.7 update.  Received Error Code: U44M1P7.  Help?
    Thank you for your assistences.

    Dreamachiever2 please see Installation failed. Error U44M1P7 | Updates - http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html for information on how to resolve your current difficulties.

  • System center endpoint protection update from WSUS faild on some computers: error 0x80070005

    Hi, some computers, not all fail to update from WSUS.
    Manual installing the full updates works.
    From Windowsupdate.log:
    WARNING: Failed to delete old install directory at C:\Windows\SoftwareDistribution\Download\Install. This may block future installs.
    I also cannot manually delete this folder, after a fresh reboot there is no more Install folder.
    From System logs:
    Sorry, the errors are in German:
    Beim Aktualisieren der Signaturen wurde von Microsoft-Antischadsoftware ein Fehler festgestellt.
         Neue Signaturversion:
         Vorherige Signaturversion: 1.169.55.0
         Aktualisierungsquelle: Interner Server für Definitionsupdates
         Aktualisierungsphase: Installieren
         Quellpfad: http://sus-server:80
         Signaturtyp: AntiVirus
         Aktualisierungstyp: Vollständig
         Benutzer: NT-AUTORITÄT\SYSTEM
         Aktuelle Modulversion:
         Vorherige Modulversion: 1.1.10401.0
         Fehlercode: 0x80070005
         Fehlerbeschreibung: Zugriff verweigert
    Beim Aktualisieren der Signaturen wurde von Microsoft-Antischadsoftware ein Fehler festgestellt.
         Neue Signaturversion:
         Vorherige Signaturversion: 1.169.55.0
         Aktualisierungsquelle: Microsoft Update Server
         Aktualisierungsphase: Installieren
         Quellpfad: http://www.microsoft.com
         Signaturtyp: AntiVirus
         Aktualisierungstyp: Vollständig
         Benutzer: NT-AUTORITÄT\SYSTEM
         Aktuelle Modulversion:
         Vorherige Modulversion: 1.1.10401.0
         Fehlercode: 0x80070005
         Fehlerbeschreibung: Zugriff verweigert
    Client is manually install, unmanaged, no SystemCenter server.

    I know this is an old post, but I've seen this several times on client pc's.  Seems to happen only with .NET updates, it'll install one, then fail the rest.  Windowsupdate.log file shows   WARNING: Failed to delete old install directory
    at C:\windows\SoftwareDistribution\Download\Install. This may block future installs.   It seems like concurrent installs fail because of this folder, and like the OP, when I reboot, that folder is gone and I can install the next update, which fails
    the remaining updates, and then we repeat the process.  This actually happened to me today new pc build, installed .net 4.0, .NET updates fail with error code 80070005. Yes, I'm logged in with an admin account.   Anyone have any suggestions? 
    I can post log files or whatever if needed.
    Tim Magnuson | MCTS, MCITP | MCCA 2011 |
    Ok, so I changed my name...you can still call me Tom if you like. It's a...jump...to conclusions...mat.
    My Blog Site: http://tmagnuson.wordpress.com

  • Hi guys i have a problem related updating icloud desktop.while updating it shows (error code :A12E5).I have macbook air mid 2011..plz sort this out

    hi guys i have a problem related updating icloud desktop.while updating it shows (error code :A12E5).I have macbook air mid 2011..plz sort this out

    olliemilne wrote:
    - I've tried holding a bunch of different keys when starting up (cmd+R etc.) but again, nothing.
    You could try booting the MBP using the OPTION+COMMAND+R keys and see if it will connect to the Apple servers.  This would allow you to install the original OSX .  I have my doubts though.
    - I've tried something crazy suggested in another thread; leaving the Macbook partially opening and shaking it, which supposedly does something to the "sudden motion sensor".
    The Sudden Motion Sensor is applicable for conventional Hard Drives, not the SSD that is in a MBA.  Doing that will serve no useful purpose.
    You have exhausted all reasonable options and will just have to have the MBA evaluated at the genius bar.
    Ciao.

  • Trying to install latest update keep getting error code A12E1

    Trying to install the latest Photoshop update,keep getting error code A12E1

    Gelixc please see A12E1 error installing Creative Cloud products | CC for information on how to resolve Error A12E1.

  • Download the Update from WSUS and install it while rebooting the Windows 7

    HI All,
          Do we have any command to install the
    already Downloaded  Update from WSUS while rebooting the Windows 7 client machine
    As per the group policy it will download and notify the user to install, but we need the command or script to install it while rebooting 
    Any comments or Idea...?
    Thanks
    Balaji

    Hi,
    Please take a check into the following thread and see if the marked answer(the powershell commands) would help:
    How to install approved WSUS updates via
    PowerShell or other method.
    Best regards
    Michael Shao
    TechNet Community Support

  • FCS Not Updating from WSUS / Cannot open MOM Console / Cannot connect to MOM DB

    Hi,
    My original problem was that FCS was not updating from WSUS. Then after reading up, and trying a whole lot of different things I managed to break it further. Now I cannot open the Microsoft Forefront Client Security Console on the management server, The
    Administrator Console and the Operator Console cannot connect to the Management server (They are on the management server)
    As a side note: The reporting hasn't worked at all, not even after the last Systems Admin reloaded the whole FCS implementation.
    I need assistance to get everything working again, and I think it might take a while to get everything resolved.
    I don't know what information to provide so here is some to start with:
    I believe this is a on server topology:
    1. There is the management server, with all the roles except the "distribution" role installed.
    2. The updates to FCS are set to go through our WSUS server.
    3. The WSUS server works fine in all regards except to push the FCS updates through (I release other MS updates every week and they all go through)
    4. Management server is 32-bit Windows Server 2008 Standard with SP1, with Microsoft Operations Manager 2005 (Unsure of SP1 is installed, but I think it is), and Microsoft SQL Server 2005 (It doesn't have the SQL Studio thing)
    5. I have domain admin credentials
    6. When opening the Microsoft Forefront Client Security console it crashes with a "MMC has detected an error in a snap-in and will unload it". Clicking on ok gives a new error page of exception: "System.Reflection.TargetInvocationException"
    7. Opening the Operator console give a message of "Error connecting to server" and clicking on ok brings up the console settings where you specify the MOM management server etc
    8. Opening the Administrator conolse immediately brings up the "Connect to a different MOM Management Server" window.
    I am hoping that someone here can ask the right questions and helped get through all these issues to get this system working again

    Thanks Quan and Faron for your replies. Firstly, when I logged into the server today and tried to open the consoles, the FCS console did not give me an error. Before I originally posted my message I already downloaded and tried that hotfix. The problem is
    there is no SQL Management Studio. Microsoft SQL Server 2005 is installed.
    The only error that really stands out is this one under the application logs:
    Source: Microsoft Operations Manager
    Event ID: 20607
    The Data Access Server (DAS) on computer SSCIS04 returned an error. System error code: -2147217770 System error text: IDispatch error #3222 DAS method called: ConfigurationGetOnePointFreeSpace Called from file: d:\bt\4\private\product\core\engine\managers\perfcountermanager\src\momperfcountermanager.cpp
    Called from line: 984 Other than that there are some terminal server printer errors and print spooler errors (which are common on pretty much all our servers), and Heartbeat errors (Event ID: 21213: Heartbeat update failed for 1 or fewer agents. Error details:
    IDispatch error #3222)
    I have just checked again and the FCS console is still opening without error. And I can start a scan. (No clients report back to the server though)

  • Microsoft Security Essentials not taking definition updates from WSUS Server.

    Hi Experts,
    I have a WSUS server installed on network on which MSE definition updates are installed, but the MSE on the client computer is not getting updates from it.
    When I click the update button it gives me error "Virus and spyware definitions couldn't be updated".
    The error code i am getting is 0x80244018. The definition updates couldn't be installed please try again later.
    I also have TMG on my network as a default gateway, I want to update MSE from WSUS not from microsoft update.
    Do I have to change rules....??? or any suggesstions that how MSE can be automatically updated from WSUS, the WSUS setting is saved into a GROUP Policy and applied....
    Please advice......

    The error code i am getting is 0x80244018.
    This is an HTTP 403 error, which is generally (but not always) indicative of a proxy server interfering with the download. Assuming this is happening when the client is trying to get Definition Updates from Microsoft during the daily scan, this error will
    likely go away once you properly set up WSUS to provide the definition updates.
    I want to update MSE from WSUS not from microsoft update.
    To do this, you need the following:
    The Definition Updates classification must be configured for synchronization.
    An Automatic Approval rule that approves the Definition Updates classification for the appropriate target group(s) must be configured and enabled.
    The policy setting Allow Automatic Updates immediate installation must be ENABLED.
    Your WSUS server should be configured to synchronize multiple times per day (at least 2).
    Your clients should be configured with a shorter Detection Frequency (8 hours is ideal).
    With the above configured, the clients will check the WSUS server 3x-4x per day, find the latest available Definition Update, download it and install it immediately.
    Note, however, that if the client fails to download and install Definition Updates, MSE will continue to do a check, and attempt to update the Definition Updates during the daily scan. If your TMG blocks the client's Internet access, then they
    will continue to log HTTP 403 errors when this definition update attempt is executed. (This is why you configure multiple syncs and scans per day -- so the client *never* has to go to Microsoft to get the current definition updates.)
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Problems installing updates to all of ilife 08

    I am having major problems installing updates to all of ilife 08. The updater recognises & downoads the updates, but after completeing the download reports an 'unexpected error'. This has been happening for weeks?

    Saundg:
    Can you give us some more info on your setup: system version, Quicktime version, iPhoto version currently running and the other iApps? Have you run Disk Utility to repair disk permissions and to verify the disk (and make any fixes that are reported needing fixed)?
    You might try downloading the individual updater files from Apple's Downloads page and run locally.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Update 13.1 error code U43m1D207?

    Update of Photoshop Elements fails repeatedly on my Win 7 computer. Thanks for ideas...

    Thanks Shikha, I deleted the folder and the problem persisted. But, previous posts suggested creating an administrator account and updating in the administrator account. That didn't work, but as I thought about your answer, I wondered if I needed to delete the AAMUpdater/1.0 file there. So, I went back and deleted the file in both accounts and up dated one application at a time and they all updated. Thanks for your help!
    Tom
        Update 13.1 error code U43m1D207?
        created by shikha.. in Photoshop Elements - View the full discussion
    Hi,
    This error occurs when the patch download is corrupt.
    Please delete the following folder and then try to apply the update:
    C:\Users\\AppData\Local\Adobe\AAMUpdater\1.0
    Thanks,
    Shikha
         If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7306811#7306811 and clicking ‘Correct’ below the answer
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7306811#7306811
         To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
         Start a new discussion in Photoshop Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Unable to install lightroom 3.6 error code 2753

    Had issues with my computer today (windows 7 64 bit) finally was able to get a restore point that would allow the machine to access windows and all the programs (including Photoshop CS5) were functional except lightroom 3.6. I was not able to have the windows un-installer remove lightroom so I had to go and do it manually. I downloaded another copy from Adobe. When I try to install I get the error code 2753. The file Lightroom.exe is not marked for installation. I checked the FAQ's and there was only one reference to that code but it refered to lightroom 2.0 software installation. I re-installed lightroom 2.6 with no problems and I tried installing the 3.6 software after installing the 2.6 version. I had no luck still receive the 2753 error code.  When I initially installed the 3.6 version on 12/4 there were not issues and the software worked with no problems. Any ideas / suggestions? Thank you.

    Hello Jeff, Thanks for the reply. What had occured was when I was working inside of Lightroom one of those balloon messages popped up making note of a hardware driver not working or missing, I really did not pay attention to be honest I thought it may have had something to do with the download of files off of the compact flash card. After downloading the files into lightroom I turned off the machine. Later on when I came back to work on the files the machine would not boot up into windows 7 instead a sort of chkdsk utility initiated, after it finished checking the disk I was given the option of going to a previous restore point, the first time it did not work. On the second try with a different restore point selected I was able to bring up windows. Everything was working except for the lightroom software. After running Registry Reviver and also optimizing the registry I still was unable to get lightroom to work.
    I decided to download another copy and re-install. Well the first trouble encountered was not being able to un-install the software from the control panel utility so I tried installing the software without the old software being removed, that is the first time I received the 2753 error code. I checked adobe.com FAQ page and the only mention about this code was in reference to the 2.X version. I tried the procedures there anyway. Still no success with the error code 2753 still coming up. I then decided to remove the software manually from the computer (only in windows, did not go through DOS or to regedit). I again ran Registry Reviver software  and tried installing the software again with no success still.
    Finally I decided to google the error code 2753 and review what was actually happening. Part of the instructions to clear the code required me to download some software that microsoft created (msicuu2) that would force the removal of the lightroom software from my machine (it was still showing up in the control panel un-install eventhough I removed it from the program file in windows). I again ran Registry Reviver and Optimized the registry, re-booted the machine gave it another try and this time I had success.
    I am happy to report that Lightroom is working without any problems. I cannot say with any certainty what caused the problem initially for all I know it could be just a case of SH's syndrome.
    I took note in your reply about the stability issue, I will pay more attention for now to see if there is a re-occurrence of this or a similar problem and then address it at that time. I would like to mention that I did not loose any photo files or have any files corrupted due to this problem........ so I am thinking more a windows problem as you alluded to in your reply than it being a Lightroom problem.

  • How can I update without getting Error Code: A12E1

    How can I update without getting Error Code: A12E1

    This may indicate a process on your machine is preventing the install from succeeding. Please try rebooting your machine and attempt the update again.
    ARe you using a windows machine or Mac?

  • Server behind TMG to grab updates from WSUS server

    Hey Guys,
    The last topic I created about grab superseeded updates from WSUS, is what this is stil about cause I can't accept this installing updates manually as a answer. So I went ahead an did even more research on this.
    To keep it simple I went ahead and adjusted the Local Group Policy / Computer Conf / Admin Templates / Windows Comp / Windows Update / Specify an intranet Microsoft update server (http://172.16.3.3:8530)
    Allowed a Rule through TMG to allow by directional traffic of TCP 8530 between the server lan (172.16.8.x <-> 172.16.3.3)
    When I click check for updates its good I can see the established connection using netstat on port 8530.
    As soon as I click download updates, it tries to grab from internet based Servers... i can see the SYN_SENT right away and I can see the blocked http traffic on the TMG.
    So I went ahead and set the GPO setting and removed the port allocation behind it (http://172.16.3.3) Doing a netstat after clicking check for updates showed connection attempt to 172.16.3.3 via http, So I added the protocol to the allow rule between the
    servers, and sure enough it changed to established, and I see the allow through the TMG. However this now gives an error when i click on check for updates...
    There has to be a way for me to get this dang server to get updates from our WSUS server on the other side of the TMG firewall.. but how?! what am I doing wrong?!
    *NOTE* with the port specified in the local GPO of 8530, I can access http://wsus/selfupdate/wuident.cab perfectly fine. I ran wuauclt /detectnow and no errors reported in the WindowsUpdate.log file
    *NOTE* The Wsus server is setup to cache all update to a local dir, attempted to see the files in there but all contained random string .cab files, wish they would just contain just the KBnumber and the msu files for easier verification of updates available
    in the cache.

    The last topic I created about grab superseeded updates from WSUS, is what this is stil
    A LINK to that post would be most helpful as I am absolutely clueless about what this post is about.
    Allowed a Rule through TMG to allow by directional traffic of TCP 8530 between the server lan (172.16.8.x <-> 172.16.3.3)
    The correct implementation for TMG is to create a Web Publishing Rule for the WSUS Server and ALLOW passthru of the client identity.
    When I click check for updates its good I can see the established connection using netstat on port 8530.
    As soon as I click download updates, it tries to grab from internet based Servers... i can see the SYN_SENT right away and I can see the blocked http traffic on the TMG.
    So I went ahead and set the GPO setting and removed the port allocation behind it (http://172.16.3.3) Doing a netstat after clicking check for updates showed connection attempt to 172.16.3.3 via http, So I added the protocol to the allow rule between the
    servers, and sure enough it changed to established, and I see the allow through the TMG. However this now gives an error when i click on check for updates...
    I see that you've specified a PRIVATE IP Address as the target of the WSUS server (172.16.3.3), so the first set of questions revolves around why there's a TMG server involved in the first place, where this "WSUS Client" is located with respect to the
    TMG interfaces, and where the WSUS Server is located with respect to the TMG interfaces. Maybe all of this is in the original post... wherever that might be. I'm going to assume that you're *routing* traffic through the TMG from one private network to another
    private network, most likely from the DMZ to the WSUS server in the Internal LAN. (Just an educated guess.)
    The second set of questions... is 172.16.3.3 the IP Address of the WSUS Server on the Internal LAN, or is that the address of the DMZ Interface on the TMG. Configured correctly, it should be the former.
    Third set of questions.... always a question I ask because it invariably sheds amazing insights into other network issues.... Why are you configuring the policy with an IP Address, rather than the hostname of the WSUS server?
    There has to be a way for me to get this dang server to get updates from our WSUS server on the other side of the TMG firewall.. but how?!
    Properly configure a Web Publishing Rule. It's that simple. I have a WSUS server "published" to the DMZ so I can patch my DMZ servers and it works perfectly.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Maybe you are looking for