Problems installing updates to all of ilife 08

I am having major problems installing updates to all of ilife 08. The updater recognises & downoads the updates, but after completeing the download reports an 'unexpected error'. This has been happening for weeks?

Saundg:
Can you give us some more info on your setup: system version, Quicktime version, iPhoto version currently running and the other iApps? Have you run Disk Utility to repair disk permissions and to verify the disk (and make any fixes that are reported needing fixed)?
You might try downloading the individual updater files from Apple's Downloads page and run locally.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Similar Messages

I have problems installing update for PS Elements 9 under Windows 8.1. Are any problems known?

I have problems installing update for PS Elements 9 under Windows 8.1. Are any problems known?

Nobody can tell you anything without proper technical details. There is no point whatsoever in throwing around generalized assumptions without having exact error messages and so on.
Mylenium

Problems Installing Updates from WSUS - Error Code 0x800f0826

Hi Everyone,
I have a WSUS server that I am using to dish out updates to the rest of my network. I am using PC's with Windows Vista SP1. Most of my PC's are installing updates fine with no problems - but there are a certain few that will not install any updates and return the error 0x800f0826.
All of the PC's are from the same image - so there is nothing different in the software setup that I am aware of.
I have been browing the net for ages, and have tried a few fixes - for example:
Starting Various Services and Setting to Automatic - No Luck
Renaming the SoftwareDistribution Folder - No Luck
Checked update history for failed updates and unassigned potential problem update - No Luck.
I am running out of ideas now - can anyone help?
Thanks
Matt

Install System Update Readiness Tool
Once you installed SUR Tool, run below commands
DISM.exe /Online /Cleanup-image /Scanhealth
DISM.exe /Online /Cleanup-image /Restorehealth
Downlod System Update Readiness Tool from below link
http://windows.microsoft.com/en-GB/windows7/What-is-the-System-Update-Readiness-Tool
Refer : http://www.thewindowsclub.com/checksur-system-update-readiness-tool
Refer below link for analyzing log and further troubleshoot :
http://www.sevenforums.com/tutorials/108805-system-update-readiness-tool-checksur-log-file-analyzis.html
Regards,
Manjunath Sullad

Problems installing update 11.1.4 please help I have tried all the fixes that other users have suggested with no joy

Hi I am having problems with the latest update (11.1.4), I have unistalled and reinstalled that many times now I have lost count, I have also tried all the fixes that other users have suggested with no joy.
What is this msvcr80.dll file that is missing, also after unistalling and rebooting computer I get another message that states icudt49.dll is missing.
Please help

Oh, and I checked here http://support.apple.com/kb/HT3939 and you are correct!
I do have an iPhone 3G not a 3GS.
So does that mean that I cannot get any later software than iOS 4.2?

Problems installing update PS CS5 on new Windows 7 laptop w/ prior PS vers. already installed

Hi,
When I first got my new Windows 7 laptop, I tried loading PSCS5 onto it, but since it was an update disk, and previous versions weren't there, it didn't load. I finished my work during a 30-day trial period on a recent sabatical, I uninstalled it and all PS files except images saved, and have now gone through the following process in attempt to load it:
1) Loaded PS 6.0 from a CD and serial number that I own--no problems
2) Loaded PS CS2 from a CD and serial nuimber I own--no problems
3) Loaded PSCS5 from an update CD also purchased, and got an error message saying something about CS4 needing to be uninstalled before CS4 could be properly loaded.
Puzzling because A: I never loaded CS4, and B: was not trying to. So I uninstalled everything conceivably troubling from Adobe, even Flash Player, Patch files, but not ASA or Adobe Download Helper. Some Adobe files left behind I deleted and emptied the recycle bin and restarted over several different times. To my knowledge, my CS5 has only been used on one other computer. Do I need to de-activate it on the other one? I don't find it on a 3rd computer, but if it was simply uninstalled, without de-activation, would I need to re-install it to deactivate it on the 3rd one. I'm hoping somebody can help me tell how many computers have CS5 activation.
Now, I've tried simply loading the CS2 disk and going to the PSCS5, and that failed, so I re-did steps 1-3 after purging also Lightroom3 and DreamWeaver CS3, thinking something from them might've been the culprit (though they earlier loaded flawlessly after a de-activation of DW on another computer). This time the Adobe Support box came up and after searching the system or whatever, said 'no problems could be found', and that I should contact Adobe Support. No FAQ's address this problem and a scan of forums was not helpful. So here I am.
Any ideas? If it is lack of a Registry entry, it would be helpful to know exactly which one and how precisely to get it and patch that into Windows 7 for those of us who are not IT geeks. I'm guessing this might be a recurrent issue and it would be helpful to simply have that code to patch in, if it is known.
Otherwise, I'm stuck using CS2, which while OK, is not CS5.
All my Adobe products have been purchased originally purchased and activated by me.
Thanks for any help,
Michael J Kissane

Hi Jeff,
After reading your mail, I've un-installed the previous versions now
(both 6.0 and CS2), including manually some files listed as
impossible to uninstall under the PS 6.0 wizard (Adobe Program files
x86, something). I restarted the computer (Lenovo running Windows 7
Home Premium).
I then tried to run the PS CS5 Upgrade disk directly and it failed
with suggestion to go to the ASA, which said quickly "Inspection
could not identify any issues. Please contact Adobe Support for
further assistance"... and the website for same.
I recall I did get a box with a request for the qualifying
prerequisite's serial when I first tried this in December, but not
having that on hand and after failing (I believe I even tried getting
serials from 'My Adobe' resource) I punted and went for the trial
period to finish my project. The rest I've written about in my forum posting.
I'm hoping info from Maggie_8 from the forum
http://forums.adobe.com/message/3880631#3880631 may get me through
it. Otherwise, I don't know if I can save what's on the new laptop to
an external HD and start all over after back tracking to a previous
point (this was possible in older Windows OS, I recall, but one lost
anything not saved elsewhere as the clock was turned back, so to speak)
Frustrating...I had problems with Adobe Reader, too, and I hope I've purged it.
Will persevere, but without wasting eons of time. Other fish to fry
and all that...
-Mike

Problem installing updates

OK. Here we go. I have an ibookG4 with about 15.91GB of hard drive space left. I was running 10.3.9 when my computer started going crazy so I decided to reinstall the os. The os that came with my computer was 10.3.5. So I loaded that with no problem. Now I want to upgrade to 10.3.9. I was told you cannot just load 10.3.9 that you have to go and do each update. So I donwloaded 10.3.6, 10.3.7, 10.3.8 and 10.3.9. I loaded the 10.3.6 just find and restarted the computer. However when I try to load 10.3.7 I get a message that says. "you cannot install this software on this volume. This volume does not meet the requirements for this update". Now I went through this process before and was able to load all of the updates. Now I can not. Any suggestions. Thanks.
Rich

palko,
Have you tried running Repair Permissions via Disk Utility on your HD before the update? I would also boot to your install disk and run Repair Disk via Disk Utility on your install disk also to check for any disk corruption preventing you to successfully update. Run those and then try running the Combo update again. If it install successfully then rerun Repair Permissions from the HD/Applications/Diskutility and you should be good to go.
Post back if still unsuccessful or if you have questions as to how to run Disk Utility from you HD or from the install cd/dvd,
littleshoulders
Message was edited by: littleshoulders

Problem with iTunes (and all of iLife!!!) finding information on machine

I just bought a new G5 Black Macbook, and had the Apple Store transfer my old profile from my G4 iBook in the past week. When i picked up my macbook, everything worked fine and all the pictures, music and personal preferences were transfered, but in the past day all programs act like i'm a new user, and do not register any of my old music, photos, or preferences. My iTunes library is located in its usual place, and all music is there, but Itunes seems not to see it, the same goes for iPhoto.
The two things that have happened in between the computer working fine and this problem are: I have installed Growl, and renamed my home tab in finder. I'm not sure if either of these played a part, but its changes that have been made.
Does anyone have any suggestions as to how to to solve this problem, or should i just take it all back to the Apple Store?

Well all the songs are Mp3s, but I will try a CD. Also, as I mentioned, I tried a few converters for the videos, and Videora was one of them. The videos that I converted with Videora don't seem to want to import to iTunes, and the .mov files won't sync (For obvious reasons now I guess). I tried reinstalling iTunes and all sorts of stuff but they just don't want to work

Problems installing updates

i just recieved a refurbished apple ibook g4. And there are eight updates that i cannot install. 1. apple intermediate codec 2. keynote update 3. desktop video out 4. garageband update 5. java 1.3.1 and 1.4.2 release 2 6. Quicktime 7.0.3 (needed for ipod video) 7. Ipod updater 2005-11-17 8. mac os x 10.4.3 update. any suggestions?

Hi Mdbitne,
Well if that is actually the problem.. you need to ask the people that sold the iBook to you to see if they can register the Logic board to your model as part of the computer and not as a spare part for repair.
Once that is doen, you can registger on line your iBook and it should recognize the logic board, but once again, I'm not really sure that could be the problem.
Hope it helps though.
Best,
ARV.-

Problem installing update 6.1

I have an iPhone 4. I tried to install the update 6.1. It failed, apparantly due to verification. After the second try, I was directed to plug my iPhone into my iTunes. I then had to restore my iPhone. If I had not had my laptop, my iPhone would have been unuseable. There appears to be a problem with the update.

Lensho wrote:
I have an iPhone 5, and it won't boot after installing ios 6.1 through the phone itself, then I conected to my laptop and use iTunes and won't restore it, just gives me the message "The iPhone could not be restored, an unknown error occurred (-1)"
With the phone connected to the computer, hold the top button and home button (like you're doing a hard reset). When the screen goes black, release the top button while continuing to hold the home button. In a few seconds, your computer should say "Detected an iPhone in recovery mode" and guide you through the restoration process.
Good luck.

Problem installing updates - proxy setting error

Every time I try to install java 1.5 updates, I get an error message saying "Installation cannot proceed with current proxy settings". I have referred to the installation guide which tells me that if I can get to the web outside my firewall my proxy settings are OK. In addition, there is nothing checked in my proxy settings in IE. I went through diagnostics with my ISP and they couldn't find anything wrong. I have tried to contact Sun but have gotten no answer. Anybosy have any ideas?

I solved the problem. Apparently Norton Firewall automatically blocks java SDK downloads. For anbody getting the proxy setting message, check your firewall settings. It does seem like Sun could give a more accurate error message.
Mike

Problem installing updated ITunes involving Windows Installer.

I have an iPhone and in order to update the iPhone you need ot have the latest version of iTunes. I tried to update my iTunes and the installation process bails saying that there was a problem with Windows Installer for me computer. I have gone online and downloaded the latest windows installer on my computer and that seemed to download ok, but when I try to install iTunes again it keep bailing. Any suggestions???

In the link below, go to the section named
*General installation troubleshooting*
Click on each line in that section to expand it for step-by-step directions.
The +Clean up iTunes installer files on the computer+ is probably going to get rid of your installer problems.
http://support.apple.com/kb/HT1926

Problems installing/updating Flash Player

Hello
I am currently running Windows 7 64bit
I noticed that my web browser would hang when playing certain flash based adverts on web pages. I wasn't sure of this was a Firefox 4 problem or a Flash problem so thought to re-install flash player in the first instance and go from there
In add/remove programs I noticed that the version installed was 10.3.181.22 but in the addons section in Firefox it was showing as 10.3.181.14
Anyway, using add/remove programs I uninstalled Flash Player and rebooted my PC. I downloaded the 10.3.181.22 installer from the Adobe website but now when I try to run it I keep getting the error message “The installation encountered errors: Flash Player could not be installed because an existing version may still be in use. Please close all applications using Flash Player and try again”
However when I go into add/remove programs again Flash Player is installed as version 10.3.181.22. Checking the addons in Firefox it is showing as 10.3.181.14. The Adobe website also shows me as having WIN 10,3,181,14
I have been through the Troubleshoot Flash Player Installation webpage and tried the stuff there in but I am still having the problem. Has anyone seen this before or have any ideas as to what might be causing it?
Many Thanks

Hi, it sounds like some application that uses Flash may have not been disabled. Try this: Download and SAVE the Uninstaller to your Desktop: http://kb2.adobe.com/cps/141/tn_14157.html
Download and SAVE to your Desktop the Installer for IE- use the EXE Installer (if you want FP Installed in IE)
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Download and SAVE to your Desktop the Installer for FF- use the EXE Installer for plugin based (from the same site)
Close all browser windows, disable any instant messenger services as yahoo, msn, etc from the system tray(area near the clock)
Disable your realtime Anti-Virus.
Use the Administrator Account
Run the Uninstaller and then reboot(restart) your computer.
Check to make sure your Anti-Virus is still disabled.
Then Run the Installer for IE(if you want Flash Player Installed), then Run the Installer for FF. When finished, Reboot.
Turn your Anti-Virus back on along with anything disabled in the system tray.
Test each browser here, and you should be able to see the Flash Player logo(Red F) animate(spin)
http://www.adobe.com/software/flash/about/
You can print these instructions out to make it easier to follow since you will be offline until finished.
Thanks,
eidnolb

Problem installing Photosmart C6180 All-In-One software

I've "googled" and found several similar installation issues but none quite match mine. When I attempt to install the All-In-One software, I receive a dialog box error "The system cannot find the file specified." The file that it is attempting to find is found in the Dialog window heading:
c:\users\Myusername\AppData\Local\Temp\7zS52C3\,sourcepath.setup\blocksys...
Using %temp% I am able to verify that the 7zS52C3 folder structure exists. However the ",sourcepath.setup" folder shown above is incorrect. it should be just "setup".
I've ran this install several times under different accounts, including creating a new admin account.
I've cleared all temp files, removed tsr files using msconfig as described and cannot seem to solve this issue. I even renamed the setup folder to ",sourcepath.setup" to see if this would solve the install but it failed on another file.
I am running Windows Professional x64, My HP Photosmart c6180 is connected to the network and I am able to print properly to it from my computer. I need the software primarily for "scanning to computer" functionality.
Any help is appreciated.

Hello @DirkPittP,
Welcome to the HP Support Forums!
I understand that when installing your HP Photosmart C6180 All-in-One Printer on your Windows 7 64 bit computer, you are encountering a 'c:\users\Myusername\AppData\Local\Temp\7zS52C3\,sourcepath.setup\blocksysinstall.exe The system cannot find the file specified' error. I would like to assist you with this issue today.
Now in your original post, I can see that you have already attempted installing the printer on administrator accounts, clearing the temp files, running an msconfig, and renaming the folder to no avail. At this time I would like you run the following steps to see if we can get this working for you.
Step 1: Uninstall Drivers:
First, I would like you to clean up your system of any software or drivers for your HP Photosmart that may have made their way onto your system during the failed installs. Rather than running the 'normal' uninstall process, I would like you to click here to download the Microsoft Uninstaller Tool.
Once the website opens, please select the Run now button on the right hand side. Please follow through any recommended fix steps provided. When prompted, choose that you need assistance with 'uninstalling'. You will be brought to a list of populated programs from your computer. Scroll through this list until you see your HP Photosmart. Select your HP Photosmart and allow it to uninstall.
This Microsoft Tool will also check your computer for any registry corruptions. Should any system corruptions be found, this Microsoft Tool will fix those corruptions for you.
Once the uninstall has completed, please close the Microsoft Tool and proceed to the next step.
Step 2: Clear the Temp Files:
Click on your Start menu
In the 'search programs and files' box type %temp% and hit enter
In the Temp folder select Ctrl + A at the same time on your keyboard to highlight everything
Select the 'delete' button on your keyboard. If you get a pop up to skip an item, just skip it.
Once the Temp folder is emptied, close the window
Right click on your Recycling Bin and select Empty Recycling Bin
Step 3: Download Drivers:
Please click here to download the latest drivers for your printer.
Once the website opens select the Download button on the top left
Allow the download to Run
Once the download has completed the installer will automatically extract
After the extraction if you get the error again for 'blocksysuserinstall.exe' take note of the temp folder 7z . . . number sequence it refers to this time around.
Step 4: Rename Temp 7z Installer package:
Click on your Start menu
In the 'search programs and files' box type %temp% and hit enter
In the Temp folder locate the 7z . . . folder that shows in there
Right click on the 7z folder and left click on 'rename'
Rename the folder to the 7z. . . to the name that the 'blocksysuserinstall.exe' points to
NOTE: Ensure that you are logged into the same User Account that the error points to: "c:\users\Myusername\AppData . . . " when you make the change to the 7z folder. There shouldn't be any 'sourcepath.setup' folders at all.
Step 5: Install Printer:
Once the 7z folder is renamed to the name the error wants than click on the 7z folder to open it
Scroll down to the bottom of the installer files
Double click on the setup.exe file at the bottom. It may show an HP logo to the left of it
An installer window should pop open
Follow through the with the onscreen instructions to reinstall your printer
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Problem Installing Updates to CS5

I got a notice that updates are available. I clicked OK, the updates downloaded and started to install. After a bit, a window pops up saying "Please Close the Folling Applications to Continue: Adobe Photoshop CS5". It's not open, I tried opening it then closing it but still get the same window. What an I doing wrong?
Gale
Windows 7

be sure your bridge is closed.
Also if you had a photoshop crash it may still be running in the background, you can press "ctl alt del" bring up task manager, then looks for Photoshop.exe is the processes tab. once you located it right click and choose end process,

Problem installing/updating iTunes x64

Hello everyone,
I tried to upgrade my iTunes to the latest version but I get errors during the installation.
I get the error two times.
I've searched for similar problems but the solutions that I found didn't helped me.
I tried everything but I can't add permitions to this registry keys or delete them...
If you can help me I'll appreciate.
Best regards,
Sérgio

I'm having the same issue... but none of the methods have worked out for me in the discussion, does anyone have any other suggestions?
I've tried doing to windows utility cleaning, ran the CS4 clean script, uninstall and reinstall multiple times, tried going through the trial (same error), loaded the program on a disc and tried to run it from the E:/, copied all the files to the C:/ and named the folder Photoshop CS4 (no luck there)...
Here is a screenshot of the error, thanks for your time in replying to my message:

Problems installing updates to all of ilife 08

Similar Messages

Maybe you are looking for