Problems installing Windows XP Pro using Boot Camp

I bought a MacBook this week for the purpose of running Windows XP off a partition. I ran the Boot Camp Assistant, partitioning 15 gig of my 160 gig hard drive for the Windows OS. Boot Camp prompted me to insert the Windows XP Pro with Service Pack 3 installation disc I'm using, so I did. I followed the Boot Camp instructions exactly, and the installation seemed to be on its merry way ... until the screen indicated there were 33 minutes left.
With 33 minutes to go, the screen seemed to freeze (except that I could move the cursor/mouse) but the installation never advanced. I waited about an hour and it was the same, so I held the power button down and restarted the computer. It booted in Windows and tried to resume installation with 39 minutes to go. When it got to 33, it hung again.
I've noticed other people having problems with this, but no solutions. Any ideas, folks?
I want to be able to boot into Windows XP, not use Parallels or any other program.
Any help is much appreciated. Thanks in advance.

Sounds like your OS is dirty. Odd for a new product. I suggest try holding down Command S at start-up to open into single user mode. You get a black screen with text only. Read the lower portion of text giving you disk mount instruction fsck -fy (in Leopard and Tiger). type the code, press enter and the computer runs a whole series of Unix scripts for cleaning system, files and disk function. After several minutes the text concludes with the words ‘The volume (name of your volume) appears to be OK.’
If so type exit and the computer opens into OSX.
If the message reads ‘The volume (name of your volume) has been modified’ that means settings are incorrect. Type the fsck -fy again, press Enter, let the system run and the result will be volume appears OK. type Exit and your back into OSX.
This bit of Unix code is invaluable for tuning up your system directories etc into sound condition. You will find an immediate speed increase. Having done this try your Boot Camp/ Windows install again. I hope it works, Good Luck.

Similar Messages

Can not install windows 7 pro using boot camp as mouse and keyboard will not work Help please

I have a new iMac and trying to install Windows 7 Pro using boot camp. I have reached the stage of starting to load windows from the DVD then discovered the mouse and the keyboards not working so I could not interact with windows installation.

Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
Format the partition as NTFS.

How do I install Windows 8 Pro using Boot Camp?

I was given Windows 8 Pro as a gift and I am curious as to how I can work around installing Windows 8 without having to purchase a System Builder. I don't want to have both System Build and Pro :/
Thanks in advance.

Welcome to Apple Support Communities
It's illegal to install this version if you haven't got Windows 7, Vista or XP installed, so if you want to use the upgrade version you have purchased, first you have to install Windows 7 in Boot Camp.
Then, after installing Windows 7, check that your Mac supports Windows 8 > http://support.apple.com/kb/HT5634 After that, download and install the Boot Camp 5 support software, and finally, insert the Windows 8 disc and follow the steps

Just installed windows 7 Ultimate using Boot Camp. Problem is when I chose to boot the windows partition, I get the windows icon on the sreen showing that it is starting, but few second after I get a black screen

Just installed windows 7 Ultimate using Boot Camp. Problem is when I choose to boot the windows partition, I get the windows icon on the screen showing that it is starting, but few second after, I get a blank screen. I suspect a driver (screen) issue, since I also installed Parallell using the boot camp partition and that works fine.
Do anybody out there has an ideal of what to do to solve this issue.
Thanks
Pierre317

Hi Pierre,
more tips can be found here ...

Installing Windows XP Pro via Boot Camp

Does anyone have any do's and dont's about installing Windows XP Pro on a 20" IMAC (OS X 10.5.7) via Boot Camp. All I want to have on the partition is Quickbooks Pro 2009, Anti Virus Program and possibly PC version of Office,

Have you tried emulation software, such as Parallels or VMFusion? None of the programs you list are overly intensive, so you may be able to get them working fine in an emulator--which means you wouldn't have to restart the machine to use those programs. Both of the programs I listed offer free trials.
Additionally, there's a few free options that are similar to MS Office that work on the Mac. NeoOffice & OpenOffice are the first that come to mind.
If you do choose to go with BootCamp, here's some pointers:
1) Get your data backed up at least once before you do anything
2) Only use the BootCamp Assistant to partition the drive and/or delete the partition
3) Go for free anti-virus, such as AVG Free. It does the job just fine.
4) Make sure you follow the BootCamp instructions carefully--if you don't, you'll find that your OS X partition mysteriously vanishes.
Good luck!
~Lyssa

Installing Windows 7 "Upgrade" using Boot Camp 4?

I've run myself into a bit of a dilemma and I'm hoping there is a work around... I have a MacBook Pro that came with Lion and Boot Camp 4. I understand Boot Camp 4 does not support running anything earlier than Windows 7. After going through the whole process and installing the full version of 7 on Boot Camp I realized when I got to the part where Windows wanted a license key that my license is only for an "upgrade" and therefore said it wasn't valid. I have Windows Vista that I can upgrade from, but I apparently can't install Vista with Boot Camp 4, and I've read I cannot downgrade to BC3. I'm trying to avoid buying a new license key for a full version of 7. Does anyone know if there is a way to make this work? I hope I have explained it properly... pretty much a catch 22!

OK, here's what you do. I'm assuming that you've got the partition laid out and your drivers ready:
Insert your Win 7 Upgrade DVD and hold down the C key while restarting the Mac This boots Setup
Run through Setup once, formatting your Boot Camp volume. For this go-around, use a Custom install
You will get to a point where you are asked for your Product Key. Skip this request now!
Install the Boot Camp software
Next, go back to your Win 7 Upgrade DVD and allow the AutoRun. Click Install Now on the window that opens.
You're in Setup again. This time, do an Upgrade. You should be back at your Desktop when this runs through. If asked for the key again, skip it.
Click Start > Computer
Now click System properties
At the bottom of the System Properties window is a link, Change product key. Click this link.
Enter the Upgrade key now while you walk through activation. It should be accepted this time.
We've just tricked Windows into thinking it was upgraded, thereby fulfilling the license requirement. This method works because the installer makes no check as to what specific versions of Vista or 7 the upgrade will qualify on. In this way, it is possible to "clean install" an upgrade copy for about $100 less than a full copy.
Nate

Tapping no longer works after installing Windows 7 RC using boot camp.

After installing it i found that tapping to click no longer works in either OS X or Windows. I've checked system preferences and it is still ticked and all other gestures work except double tap and single tap. How do i fix this?

OK, here's what you do. I'm assuming that you've got the partition laid out and your drivers ready:
Insert your Win 7 Upgrade DVD and hold down the C key while restarting the Mac This boots Setup
Run through Setup once, formatting your Boot Camp volume. For this go-around, use a Custom install
You will get to a point where you are asked for your Product Key. Skip this request now!
Install the Boot Camp software
Next, go back to your Win 7 Upgrade DVD and allow the AutoRun. Click Install Now on the window that opens.
You're in Setup again. This time, do an Upgrade. You should be back at your Desktop when this runs through. If asked for the key again, skip it.
Click Start > Computer
Now click System properties
At the bottom of the System Properties window is a link, Change product key. Click this link.
Enter the Upgrade key now while you walk through activation. It should be accepted this time.
We've just tricked Windows into thinking it was upgraded, thereby fulfilling the license requirement. This method works because the installer makes no check as to what specific versions of Vista or 7 the upgrade will qualify on. In this way, it is possible to "clean install" an upgrade copy for about $100 less than a full copy.
Nate

When completing install win 8 pro on my macbook pro using boot camp, the win 8 can't be started to complete win configure like user account and others, please help

please, when I installed win 8 pro using boot camp vers. 5.0.2 it was completed but when win start the first time to be signed my user name and password the mid of screen appeare blue and the other black, then the whole things stoped.
knowing that the win instalation going smoothley without problem during progress
regards

Did you download and install the Bootcamp Windows Support software according to the Bootcamp Installation Guides? http://www.apple.com/support/bootcamp/
There is a Bootcamp Forum here. https://discussions.apple.com/community/windows_software/boot_camp
You should ask Bootcamp questions there. The moderators may move this thread to the Bootcamp Forum.

Install Windows 8.1 with Boot Camp

Greetings you all,
I've been trying to install WIndows 8(.1) on my MacBook Pro early 2011, but without any success. I downloaded the .ISO of Windows, stored it on my external HDD, downloaded the software via Boot Camp to host Windows (I'm sorry I'm french so I'll have to translate everything) and put it on another external HDD, and when I plug them to my Mac and start the installation of Windows, it doesn't detect the USB.
What should I do? If possible, avoiding any installation of the disk image on a DVD.
Thanks.

Hello Mickaelpopo,
Thank you for the question. It sounds like you are trying to install Windows 8.1 using Boot Camp 5 on your MacBook Pro. Currently, Windows 8.1 is not a supported version of Windows for Boot Camp:
Which versions of Windows work with Boot Camp 5?
You can use:
Microsoft Windows 8.0 (64-bit)
Microsoft Windows 8.0 Pro (64-bit)
Microsoft Windows 7 Home Premium (64-bit)
Microsoft Windows 7 Professional (64-bit)
Microsoft Windows 7 Ultimate (64-bit)
Windows XP, Windows Vista, and Enterprise versions of Windows 7 and Windows 8 are not supported.
Windows 8.1 is not supported with Boot Camp 5.
You can find more information here:
Boot Camp 5: Frequently asked questions
http://support.apple.com/kb/HT5639
Thank you for using Apple Support Communities.
Best,
Sheila M.

Installing Windows 7 RC1 with Boot Camp AND Parallels?

I have a 24" iMac (2009 model) and have successfully installing Windows 7 RC1 using Boot Camp. No problems at all and everything is working fine. But now I'm contemplating purchasing Parallels and using Windows 7 in a window.
I just need to know the steps involved and how this works. First I purchase and install Parallels. Then I run it and somehow tell it to use my Boot Camp partition for the VM, right? In this way, I'm assuming I don't actually have to install Windows 7 again or make another partition, right? Once I get the VM installed, then I can either boot to Windows 7 from startup OR boot from within Mac OS using Parallels and it would be the same?
If I can do it this way, can anyone point me to step-by-step instructions on how to choose the right settings in Parallels? I have found instructions for installing Windows 7 using Boot Camp and Parallels separately, but not how to use the Boot Camp install for the VM in Parallels.

Wow, it was much easier than I thought it would be! Downloaded the trial of Parallels. Installed it and pointed it to my Boot Camp partition with Windows 7 installed on it. And minutes later, I'm up and running with Windows 7 in Parallels. Sound didn't work at first, but after I did a Windows Update, it installed the correct driver and now everything is working great. I can't believe how smooth this thing runs within Leopard. I allocated 1GB of RAM for WIndows 7 and it's seems fine so far, but I really haven't run any resource-intensive apps yet.

Cannot install Windows XP Professional on my MacBook Pro using Boot Camp.

Cannot install Windows XP Professional on my MacBook Pro using Boot Camp. When I get to the point of inserting the Windows disc and clicking 'Install' at the Boot Camp Assistant screen, it keeps telling me that it cannot find the Install Disc. The installation disc I am using is a new full install disc. I have tried to do the same thing using a Windows 7 disc with the same results. Does anyone have any answers. I am getting desperate!

saturnotaku wrote:
Csound1 wrote:
Windows XP is not supported, install Windows 7 or 8.
Reading the entire post is your friend:
I have tried to do the same thing using a Windows 7 disc with the same results.
Perhaps you could offer a suggestion then.

I am using windows Macbook pro 15 retina display model with latest mountain lion 10.8.3 software Have installed windows 8 perfectly via boot camp. However many a time the machine is not able to boot windows 8 and aborts. just shows the green screen for a

I have installed Windows 8 perfectly ia boot camp but on booting the windows 8 does not load up fully. It comes upto the windows green screen for a moment and then goes blanlk. It is very frustrating.

no one has replied me too got this issue ,

Friends, MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New MB Pro with OSX 10.6 – current on all updates. I successfully installed rEFit. I used Boot Camp to install Win 7. All was great. Then installed debian 6. Somehow after the debian i

MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New with OSX 10.6 – current on all updates.
I successfully installed rEFit. I used Boot Camp to install Win 7. All was great.
Then installed debian 6. Somehow after the debian install and restart (I know this sounds crazy) but I am now reduced to Win 7 only. rEFit is not present when rebooting nor is OSX or debian. Further, I am unable to force the install DVD to launch when rebooting, by holding C, D or F8. The Option key brings me to the grey screen with a padlock. I have attempted the root and local pw- no go. Restart holding D takes me to the windows boot manager. I have attempted several options within the Advanced Options; including – Repair Your computer, safe mode and “last known good config,” All of which did nothing.
I can see all my OSX files within win7. I tried to install the OSX within windows. Ya right, that did nothing..
I only desire to get back to OSX...
What are my options??

Yes, you royally hosed up your machine.
You should first try to get your files off, any way you can to a external drive.
Your going to need to hold c and boot from the disk that came with your computer and a couple of screens in under the menu is a option for Disk Utility.
Select your drive and Erase with Security Option Zero, format the drive HFS+ Journaled and when that's finished (about a hour or so) then quit and install OS X from the installer.
I hope this works, but I suspect it won't. Others have hosed their machines trying to use a Linux disk without proper partition formatting too.
Another option might be to use another Mac to c boot off the Snow Leopard disk and install OS X onto a external drive, take that to the problem Mac and try holding option and booting off of it to erase your internal drive.
You could replace the drive.
frederick s wrote:
The Option key brings me to the grey screen with a padlock.
Is this holding option while booting?
There was someone else around here who hosed their Mac with a Linux disk too. Try to find it.

HT5639 Do I need to uninstall boot camp 4 before I install and update to boot camp 5. I already have windows 8 pro with boot camp 4 installed. Do I need to unistall boot camp 4 or not necessary?

I already have windows 8 pro with boot camp 4 installed on my macair book 11". I have searched the entire articles on how to upgrade boot camp 4 to boot camp 5 but have found no answer as to my question: Do you have to uninstall boot camp 4 drivers before you install boot camp 5? I am not sure if it is ok to install boot camp 5 directly without uninstalling boot camp 4 because there might be driver version conflict. So I have not installed boot camp 5. Is it ok to install boot camp 5 withoust uninstalling boot camp 4? Your answers will be much appreciated. Thanks.

Welcome to Apple Support Communities
You don't have to uninstall Boot Camp 4 drivers before installing Boot Camp 5 drivers. Boot Camp 5 drivers will simply overwrite Boot Camp 4 drivers, so you don't have to uninstall old drivers before installing new ones and making that process easier

Can you run a window version of LabVIEW on an Apple MacBook Pro using boot camp?

Can you run a window version of LabVIEW 8 on an Apple MacBook Pro using boot camp?

I don't have a mac, but you may want to read this:
http://themacview.blogspot.com/
Should give you more info about what NI is saying.
Matt Holt
Certified LabVIEW Architect

Problems installing Windows XP Pro using Boot Camp

Similar Messages

Maybe you are looking for