Problems installing winXP on Boot Camp partition

Hi!
I have to reinstall my iMAC after change of hard disk. (Broke down)
I try to reinstall WinXP on my iMAC using Bootcamp, but have some problems.
I have used the Bootcamp Assistant and made a 32 GB partition. Afterwards I want to install WinXP on that partition. I follow the installation guide and insert my WinXP CD and click start installation.
The computer boots and try to restart on the WinXP CD, but the installations doesn't start. Only a black screen and a cursor flashing in the upper left corner.
Only way to end this is to restart computer.
The WinXP is incl. service pack 2 (same as I used before change of hard disk)
Boot Camp is version 3.0.1
Can any one give me a hint so I can get this installations to work?
Thanks,
Ken.

Use Boot Camp to remove the windows partition and make the mac OS X the only partition of the HD again. Reboot the computer. Run Boot Camp again to create a new partition on the HD then follow the instructions to boot up the Windows XP install disk.

Similar Messages

Problems with Windows install and erasing Boot camp partition.

I recently decided I'd try running a copy of XP on my Macbook, the only reason being that the software for my OU work is only available on Windows. I used Boot camp assistant to partition my hard drive which went smoothly. When I tried to install Windows, I get to the Windows install screen, and it says "Press enter to begin installation". Unfortunately, my keyboard doesn't seem to work, so obviously I can't begin the installation. I've tried using my old Apple USD keyboard, but it didn't make any difference. I thought I'd try the whole process from scratch, but found I can't erase the original partition. I've read that you should use Boot camp assistant again, but when I press the continue key, I get the message:
"The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows."
Does anybody know a way of sorting either of these problems out? Much appreciated.

I've been doing a bit more reading into the problem. I think the keyboard problem's because I'm not using the SP2 version on XP. So hopefully once I get a copy, I should be able to sort it. But I still can't seem to use BCA to erase the partition.

Possible to re-install XP on boot camp partition in 10.7 (Lion)

Hello,
I'm new to this forum and found it very useful in the past.
Now I wanted to know;
I am currently running 10.6 (Snow Leopard) and installed Windows XP Home Edition (32bit) using Boot Camp.
If i updated to 10.7 (Lion) I know I will more than likely still have a working XP installation, but what if i mess it up? Will i be able to reinstall XP (On the same partition) with OS X Lion installed? I know it is no longer officially supported. (And then of course use the Snow Leopard CD to install drivers ect..)
Thanks,
BK
PS im quite sure its possible because with XP installing Lion doesn't update Boot Camp to 4.0 right?

You always have backups for Mac OS, just make one with WinClone.
It - the parttion and OS - will still be there, only moved and no longer on #3 partition.
Lion can add Recovery.
Lion can also be installed on another hard drive instead, and then restored.
Lion is stll in the dot "zero" phase of its existence.
There is more risk in upgrading to Lion itself. What does it add to enrich or in performance?
There are half a dozen tutorials on MacFixit, reader discussion on MacIntouch of all things Lion, and Lion Community? 1000s of threads.
Anyone that doesn't come prepared with backups, clone of Mac OS, needs to develop and recoveryu strategy.
There is never a 100% risk free upgrade, never has been. Insurance companies live on cost-risk.

Possible to re-install XP on boot camp partition in 10.7

Hello,
I'm new to this forum and found it very useful in the past.
Now I wanted to know;
I am currently running 10.6 (Snow Leopard) and installed Windows XP Home Edition (32bit) using Boot Camp.
If i updated to 10.7 (Lion) I know I will more than likely still have a working XP installation, but what if i mess it up? Will i be able to reinstall XP (On the same partition) with OS X Lion installed? I know it is no longer officially supported. (And then of course use the Snow Leopard CD to install drivers ect..)
Thanks,
BK
PS im quite sure its possible because with XP installing Lion doesn't update Boot Camp to 4.0 right?

Sorry i'm new to this forum, i'll repost thanks!

Problems installing Windows with Boot Camp

Hello,
i am having this strange issue with boot camp. i have my windows 7 install dvd and go through all the standard boot camp procedure's, but once its finished partitioning the disk and restarts it just opens up to the apple logo on a grey screen, no spining logo, no status bar, nothing! ive left it for 6 hours on this screen 2-3 times now and nothing is happening. when i turn off and on again it just goes to a black screen telling me to install a bootable device and press any key. BUT THE INSTAL DISC IS IN!!! its driving me insane!
windows was burned to a dvd using disc aid and the .iso copied over fine and was verified and everything. the machine im trying to get this to run on is a 15 mbp 2.66 i7. the optical drive has been replaced with a 120gb ssd and there is a 1tb internal sitting in the hdd bay. i dont know if that has any relavance to this issue? i boot osx 10.7 (mountain lion) off the ssd and am trying to boot camp my hdd, but that couldent cause issues could it?
ive had a look around the other disscussions and fourums for 4 days now and i think i have seen nearly every bootcamp related youtube video there is! AND IT STILL DOSENT WORK!
if any one has ANY idea or sugesstion on how i can rectify this issue it would be greatly appriceated.
thanks for your time!
Harry.

"You can't do both boot drive and storage drive on the same drive.
A boot drive requires (all data off first) it to be formatted GUID and OSX Extended Journaled, then OS X installed, then option key at boot to select that HD OS X boot drive, then BootCamp proceedure ran and install into the partition it creates on the HD."
THANKS AGAIN, i think im getting closer to a solution, i really dident think that simple old bootcamp could become so complicated!.
so i couldent (boot off the ssd as normal) and then create a seperate partition on the hdd of about 30gb, install osx on it, boot from that (with the optical bay back inside), create a thrid partition on the hdd via bootcamp then instal windows?
its just that erasing and reformating the hdd sounds a bit scary, its taken months of getting the permissions and fixing rouge ubd processes all right so everything works perfectly and seamlessly together with the ssd+hdd combo
"You can replace the data back into OS X on the HD and use that as extra storage, but your main use OS X user(s) needs to remain on the boot SSD.
To do this you need to use Carbon Copy Cloner to clone the OS X boot partition of the SSD to the blank/empty of data HD, this will copy all the Users accounts accuratly so you can access them from the SSD.
As you can see here, I can access the same user folders of my cloned partition from the original partition, no "-" minus signs on the folders as I'm the exact same user.
I am currently booted into Macintosh HD and accessing my same named user folder on the clone on Macintosh HD 2.
So basically OS X on HD will become your new "Storage Drive"
this is pretty much exactly how im set up at the moment! with the user account and applications on the SSD and libarys like iphoto, itunes etc are on the HDD and i symlinked some others like the downloads off to the hdd aswell.
thanks for your help again, ive given you some more stars for your time!
Harry.

Problem installing windows 7 boot camp(cd/dvd drive)

This happens right away after clicking to install now(see picture). The window takes me to where it has to find a cd/dvd drive and it can not find any. I can't advance further into the installation because of this. Anyone got any clues as to how I can fix this?

This happens when Win7 doesn't seem to have the right hard disk controller driver for your setup.
Might be that you somehow got a bad burn in (which can happen on occasion) or that the disc is damaged or dirty.
What I've also seen happen, is that Windows sometimes gets taken aback for no reason at all, in which case starting over might help.
If your Mac requires another storage point for the drivers, you can use a USB flash stick as the driver source.
Nate

Problem trying to install XP via Boot Camp, computer almost died

Hi there,
I just recently purchased a 24" 2.8Ghz intel iMac 500GB harddrive with OS X 10.5.2. I plugged everything together yesterday morning and the computer was going fine, just liek a dream. On a side note I was genuinely impressed with the ease of setting up and how quick, intuitive and reliable the mac and OS X Leopard was.
This is a bit long but I think I need to go into detail what happened in order for any of you to fully understand what happened to my mac.
Later in the afternoon I decided to install Win XP via Boot Camp. I knew that XP SP2 or later and VISTA was recommended but I decided to use my XP Home Edition "2002 version" install disc instead.
I opened up the Boot Camp Assistant, partitioned 15GB of the 500GB harddrive, inserted WinXP install disc and the computer restarted with everything going to plan thus far. I was going through the install process as normal but I came to a window asking which partition to use to install XP ("c" or "d") or if I wanted to create another partition. I also had my iPod still connected to the computer and I think the installation recognised that harddrive too (all 12GB of space left on my iPod). I wasn't sure what to do so I decided to quit the install process by pressing the relevent keys ("press F3 to quit" etc). Upon automatically restarting the computer I first came to a white screen for about1 or so minutes and then a black screen came up with white text asking me to "press any key to 'something' the CD" (can't remember what the rest of the text was), but the keyboard was unresponsive. I turned the computer off and unplugged it as according to the instruction manual that came with the mac, waited the suggested 5-6 seconds, turned it back on but I came across the same screens. I couldn't eject the XP install disc either. I restarted the computer again, held down the eject button whilst restarting, the disc thankfully ejected but I then came across the same black screen but with no text, just a white flashing underscore cursor. I decided to remove my iPod and restart the computer again. AGAIN I came across the same white screen, then black screen with the flashing white underscore cursor and unresponsive keyboard. I decided to insert the OS X install disc 1 (I don't remember if I inserted it whilst at the black screen or if I restarted the computer and THEN inserted the OS X install disc). The disc loaded slowly but I eventually went through the install process (choosing your language) and then came across a window asking me "Where would you like to install OS X?" but I couldn't install it anywhere. I opened "disk utility" or some program with the word "disk" in it, had no idea what I was doing, somehow created a new volume (though I thought I was actually erasing the XP partition I set up earlier) but in MS-DOS FAT Format or something. I then was able to choose a place (or volume) to install OS X but I had to change the format of the untitled volume from FAT to something along the lines of "Mac OS X journaled (enabled)" (whatever that means). There were other format options available but I just chose the top one on the list (Mac OS X journaled (enabled)). I then made a full install of OS X 10.5.2 and late last night downloaded the latest pdate for Leopard (10.5.4) along with other updates. The computer is working fine now thankfully andeverything seems to be back to normal.
I just want to know what actually happened. What did happen to my computer? Did I somehow wipe the harddrive? Why didn't the computer reboot to HDD when I ejected the WinXP install disc? Which format is the HDD formatted to? What does "Mac OS X journaled (enabled)" mean? Also how come my HDD is 500GB whereas when I checked Boot Camp Asistant a second time (but not installing Win XP again) My HDD is 460GB with 440GB of available space? Is there still another partition I am unable to see? Is there an extra 40GB of data floating around the harddrive that I'm unaware of? What are the factory settings for my computer? I really hope I haven't formatted the disk and installed the OS to settings that weren't like how the computer was originally set BEFORE I regrettably tried to install WinXP via Boot Camp.
If anyone could respond or give me some sort of advice, explanation or help I would very much appreciate your assistance.
Cheers.

According to wiki "the documentation from Apple states that Windows XP Service Pack 2 or Windows Vista is requisite for a Boot Camp installation, and it also mentions that trying to install an unsupported operating system could prevent the computer from booting even into Mac OS X". Sure that was from wiki, but it does seem to support and somewhat validate the problem I had with installing an earlier edition of XP.
http://en.wikipedia.org/wiki/BootCamp_%28software%29#Other_operatingsystems
Thanks for the info on the Filesystem info. My problem is that installing OS X on a mac is just a little bit more technical than installing Windows on a PC as there are a few more things to consider. Plus I'm not familiar with any of the utility programs as well. It's a **** miracle I managed to somehow create a volume to install OS X on when I thought I was erasing the partition I created for WinXP.
But I'm still not sure about the missing 40GB from my 500GB HDD. Upon coming to the desktop straight after OS X was fully re-installed I noticed that the HDD only had 460GB and that 440GB of it available space. So the full installation of OS X was 20GB, but where has the other 40GB gone? I swear I saw that I had much more available space on my harddrive (BEFORE I tried to partition my HDD under Boot Camp Assistant and stuffing up the computer). Is the missing 40GB from the ORIGINAL FACTORY INSTALL of OS X INCLUDING all my iTunes music and other files I uploaded to the computer earlier? It would make sense but there's no way, as far as I know, of checking this. Any ideas?
Cheers.

Boot Camp Partition & Windows Vista - Disk format Problems

When Boot camp partitions the disk (I chose 25gb) it automatically formatted it as FAT32. However, when installing Vista, it says that it requires the disk to be formatted as NTFS.
The Boot camp instructions says I should be given the option which format to use, but no option came up. I don't want to partition more than 32gb.
How do I get Boot camp to format the partition correctly?

Read the instructions that come with Leopard Boot Camp. The partition is automatically formatted at FAT32. However, it's a) not bootable (Windows has to do that) and b) Vista requires NTFS. That means once you're in the Vista installer you need to REFORMAT the partition. Select the partition, and then click, umm, disk options I think. Then reformat the drive. If you do that you should be able to continue.
100years wrote:
When Boot camp partitions the disk (I chose 25gb) it automatically formatted it as FAT32. However, when installing Vista, it says that it requires the disk to be formatted as NTFS.
The Boot camp instructions says I should be given the option which format to use, but no option came up. I don't want to partition more than 32gb.
How do I get Boot camp to format the partition correctly?

How do install windows hard drive (from dead pc) into boot camp partition

My Windows 7 desktop died recently, so I took the opportunity to buy a Mac Mini (latest version as of Feb 2012) as a replacement. I want to transfer the Windows 7 installation (from the dead PC) including all applications, accounts, settings, user files, etc to the Boot Camp Partition. Can someone please provide the steps on how to perform the Win 7 migration to the Mac Mini.

Just to clarify:
I want to install the Windows 7 installation from dead the PC into the Mac Mini's Boot Camp partition.
I installed the PC's hard drive into an enclosure and connected it to the Mac Mini via the USB port.
What I want to do is the following:
1) Do a Windows 7 "fresh" install in the Mac Mini Boot Camp partition.
2) Migrate all the applications installed on the Windows 7 PC and their associated data.
3) Migrate all user accounts and data.
Is there a tool that can transfer all applications and user accounts from the Windows 7 Hard Drive to the Boot Camp partition on the Mini?
Based on the documentation the Window Migration tool is Lion OS utility and does not perform a complete migration of all applications installed on the Windows machine.
thank you.

I had to replace my iMac due to hard drive and Logicboard failure, so I want to reinstall Windows 7 on a Boot Camp partition. Will there be a problem reactivating Windows 7 Home Premium?

I had to replace my iMac due to HDD and Logicboard failure, so I want to reinstall Windows 7 on Boot Camp partition. Will there be a problem reactivating Windows 7 Home Premium?

Hi,
should be no problem.
Best case is you can activate online via Internet.
Worst case is you have to call Microsoft and explain that it is the same computer after a mainboard failure.
Regards
Stefan

Can't install windows it says the boot camp partition is not formatted as a NTFS file structure

Using boot camp assistant it gets to the point of installing windows 7 and it won't because the boot camp partition is not a NTFS file structure. It also seems strange to me that there are 5 partitions would have expect ether 2 or 3. Please help this is very frustrating.
Thanks in advance

Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
Format the partition as NTFS.

Black screen when installing Windows XP on new Boot Camp partition

I just upgraded my iMac Intel Alum to Leopard and used Boot Camp to create the Windows partition. When I try to install Windows XP from the install disk, I just get a black screen with a blinking cursor in the upper left corner. Is it having trouble finding the Boot Camp partition for the Windows install? Everything else is working fine. Leopard still boots okay and everything works in Mac OS - I just can't get to the next step of installing Windows.
Thanks in advance,
David

When I say disk image, I mean a copy of a friend's Windows XP install disk . Even though it's a copy, it boots a PC fine. Any reason why it wouldn't work on the Mac?

Lost Boot Camp Partition in my Mac , I can´t install OS X Leopard in my iMac

Lost Boot Camp Partition in my Mac , I can´t install OS X Leopard in my iMac. Thank You

Impossible to answer with information provided

HT5639 On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.

On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.

Yes, purchase Paragon Camp Tune for the job.

I can not install xp through boot camp, the team just bought yesterday, is a macbook pro 13 when my old computer did it without problem with the same install disc

I can not install xp through boot camp, the team just bought yesterday, is a macbook pro 13 when my old computer did it without problem with the same install disc

There are no XP or Vista drivers for the new Apple computer hardware. Apple stopped XP and Vista support. http://support.apple.com/kb/HT4410.

Problems installing winXP on Boot Camp partition

Similar Messages

Maybe you are looking for