Problems joining AirPort Extreme network from 10.3

I need to bring an old iMac back into our family network. I erased the HD and installed 10.3. The airport card in the iMac sees our network and knows the password (I also reset the base station tonight so I know the password is correct and works with 2 laptops in the house.). However, each time I enter the password for the AirPort network, I get, "There was an error joining the selected AirPort network." Does this have anything to do with the type of password (WEP, etc?). When the iMac requests the password for joining the network, it simply requests, "Password."
Thanks!

If you temporarily set the security on your main router to "none", can the iMac connect that way?
If yes, what base station are you using?

Similar Messages

Emac G4 problems with joining Airport Extreme network

I have an Airport Extreme network with two Airport Express base stations. The Airport Extreme is connected to the internet via ethernet/cable modem. The imac and the base stations work fine and I have no problem with my internet access on the imac, but I can't get internet access via the emac. It appears that the emac is connected to the network, but I get an error message ("Can't find server") when I try to access the internet. What have I done wrong?
imac G5 isight Mac OS X (10.4.4) Other computer: emac G4, operating system 10.3.9

Is the eMac connected wirelessly to the network?
It may be a DNS issue, see KB 106798, Mac OS: Troubleshooting "A connection failure has occurred", "The specified server could not be found" or Similar Messages.

IPhone 5 unable to join airport extreme network, help!!!

I just bought an airpot extreme a week ago. After I configured it, my macbook pro can connect the wi-fi flawlessly. However, my iphone 5 was unable to join the airport extreme network. It sees the network, just can't join it. It doesn't say unable to join, I choose my network on my iphone, it shows it is trying to join, and never successfully joined. I've been trying miliion's way to fix this problem. I reset my iphone completely, reset my airport extreme, and reset the model, still never worked. Any idea?

Was one of the million ways that you tried.....changing the name of the wireless network on the AirPort Extreme and also changing the wireless network password?
If not.....
Keep the wireless network name simple
Use only letters and numbers.....no special characters (like an apostrophe or asterisk, etc)
Limit of 20 characters or less in the name....8-10 would be ideal.
No blank spaces
Same rules for the wireless network password
If that does not work, I can only conclude that the operating system on the iPhone has become corrupted....and this is an iPhone problem....not an AirPort Extreme problem.
Best to post in the iPhone support area to let the experts over there have a crack at things....but in general you will need to reset the iPhone back to its original default settings, then restore it again from your backup. If that does not work, the iPhone needs to be replaced.
Using iPhone

New to wireless Cant get airport express to join airport extreme network

So... I just got this MBP yesterday along with airport extreme and airport express. I got the base station set up i just cant get the express to connect for the life of me... help anybody? Everything is in range i know that for a fact. I just cant get it configured and i already looked on the airport express support page and followed the instructions and i still can't get it. :-/

Factory reset your Airport Express (AX).
Resetting AirPort Express
http://docs.info.apple.com/article.html?artnum=108044
Connect to the Airport Extreme Network
Use the Airport Assistant to configure a new base station and configure the AX to join an existing wireless network (either use client mode, only extend your network if you need to do so).
iFelix

Problems extending Airport Extreme network

I am sure this must have been covered but I can't find it here, and feel a bit foolish asking this, but I bought a new AE base station (the new flat 'n' variety).
I set up my network fine (I have a Netgear wireless router connected to MacPro with AE card). I also have (1) an older flying saucer AE base station and (2) an Airport Express. I want to boost my signal so the whole house can get a good signal. However, when I try to add 1 or 2 I am told it can't be done because "this computer does not have an Airport Extreme card" (it does!). I have obviously done something wrong because 1 and 2 show up in the network as if they are networks (they have the default names like "Apple Network e371b8" but obviously they have no Internet access. I have tried this several ways today and failed every time. Should I give 1 and 2 the same name as the main network so only a single name shows up in the network list??
Can someone who has successfully extended their network using the new style AE + older flying saucer AE +/- Express please tell me what settings they used?
Cheers
Drew

This Digg may help you.
See Digg
http://www.jayhaynes.net/2007/04/donot_install.html
April 10, 2007
Do NOT install AirPort 802.11n Firmware 7.1
This Firmware 7.1 update for AirPort Extreme Base Station with 802.11n should definitely NOT be installed.
Here was my problem:
I used AirPort Utility 5.1 to install the update. It is automatic - launch the utility and it asks if you want to install the update. I said yes because I had problems getting two AirPort n base stations networking together to extend my range (I gave up finally and just used an AirPort Express to extend the range).
After the firmware update, some sites would not load at all (www.nytimes.com) and others took forever to load. And worse, I could not send any email from any of my IMAP accounts. It seemed to be a DNS problem.
I have two 802.11n AirPorts, so I finally went back to the other one (7.0) and everything worked fine. The Apple tech support guy offered to replace my broken (7.1) AirPort.
Foolishly, I wanted to make sure the problem was actually with the 7.1 update and not the AirPort itself. So I updated my second 802.11n base station with 7.1. And it casued the exact same problem (some sites not loading, no outgoing email).
The Apple tech (at this point I was speaking with a wireless specialist) put me on hold to test a few of his AirPorts to see if he could revert back to firmware 7.0 or (ii) install a clean version of 7.1 (in case the version on my drive was corrupted).
Unfotunately neither option was possible, which is a design flaw in AirPort Utility.
Apple is sending me two new AirPorts in 1-2 days, which is great service, but I will not be installing firmware update 7.1 again. Fool me once...
http://www.apple.com/support/downloads/airportextremebasestationwith80211nfirmwa re71.html

How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
Sigve

Hi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve

How do I prevent other Mac users from changing my Airport Extreme Network Name and Password within the Airport Utility?

How do I prevent other Mac users from changing my Airport Extreme Network Name and Password within the Airport Utility? My company is using an Airport Extreme in our office now and I want to prevent other employees from messing with the network/settings. Is there a way to place a password on the settings to allow only the admin to access the network name and password?

Hi - you have will have to change the device passwords on all the base stations and then don't give them to anyone except the administrators and tell them not to save them on their computers that use the older versions of the Airport Utility - for the newer versions like the mobile apps, as soon as you enter the pasword it is saved and is visible in the advanced pane along with the network password - so if anyone gets a hold of your iPad or iPhone, they can edit the whole network - I have this same issue with my networks in the office and it is inconvenient but doable - I hope this helps

Can't join the airport extreme network with my iphone~~please help

Can't join the airport extreme network with my iphone

What radio mode do you have the 802.11n AirPort Extreme Base Station (AEBSn) configured for? (ref: AirPort Utility > Select the AEBSn > Manual Setup > AirPort > Wireless > Radio Mode = ?)

HT1218 why is streaming to my TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP s

why is streaming to my sony TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP service? Airport extreme software is up to date.
please advise
Michaelgfrommet

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

PROBLEM: Trying 2 add an AIRPORT EXPRESS to an already existing AIRPORT EXTREME network

I'm trying 2 add an AIRPORT EXPRESS to an already existing AIRPORT EXTREME network in my home.
I see the EXPRESS in ARPT UTILITY but when I click on "CONTINUE" or "MANUAL", the only option I'm given is to SWITCH networks, which I do not want to do.
I am using a MACBOOK PRO (MAC OS X 10.6.8)
Can someone offer me help with this?
Thanks!

Hi, I have a similiar setup. When you click onto the express, and it asks you to switch networks, it's not actually asking you to "change" networks. It's just actually switching to the xpress. When the xpress comes up, you'll input the name of your existing network, which you set up and named for the extreme. You'll have to change the extreme to "participate in a network", which is what you'll also do for the xpress. In the extreme under the WDS tab, you'll input the wds mode as "wds main". And then put a check mark in the "allow wireless clients". Where it says wds remotes, you'll input the the airport id's for the xpress's. In each of the xpress's, you'll set up as participating in a wds network. In the xpress's, under the wds tab, you'll set the wds mode to remote, and check
mark in the allow wireless clients. You'll have to input the airport id of the extreme in the wds main block. Under the internet icon on top, in internet conect tab for connect using: airport (wds), connect sharing: off (bridge mode).
Remember to insure that the express's show the same channel as the extreme, if you're using 802.11n (80211b/g compatible). Of course the security that you decide to use should also be the same.

Error joining airport to network

Hi,
I have a wireless nortel solution set up in our school. We run power over ethernet base unit 2330a access points running back to 5520 POE switch. That runs back to a 2380 security switch. We have the latest firmware.
All our dell xp systems connect with no problem using WPA secured SSID. We also can connect with an open SSID.
All of our macbook's do not. They sometimes do connect, but 90% of the time will not. When i try and select it gives me an error that there was an error joining airport to network "WPCSD"
I have tried everything. This even happens when the system is brand new right out of the box. It happens in 10.4.8 all the way through 10.4.10 with all updates.
Strange, but when i go into xp on our duel boot macs, (same system) there are no problems.
I spoke to apple support, they were not much help, claiming it must be Nortel's problem.
I tried to find an external usb network adapter. I figured if i can connect with that then it must be the airport extreme. I had no luck, all seemed to be made for xp.
Is anyone out there rinning on a nortel wireless solution?
Has anyone had any issues with their macbooks and wireless.
I need out 100 new systems to connect.
THANKS!

Yes hard wired i have no issues. I have tried the wireless with both DHCP and with static ip. Sharing seems to work. I can connect to another mac.
I have searched Nortel and googled. No luck. We are dealing with thier support. The feel if the xp systems can connect, then the system is fine.
Apple claims that if i can connect to other networks (ie home linksys) then the problem is nortel. see where this is going.
However that does not help me out. The nortel is a very expensive wireless solution, as you can expect. So its not like we can just get rid of it and buy a non-managed solution.
even if we bought external card for the macs that would be a solution, but it does not seem like these are even made.
i was just posting to see if anyone else is using a managed wireless solution like nortel's?
thanks

Samsung Blu-Ray player, Airport Extreme network, and streaming Netflix

I am very frustrated. Can you help? My husband just purchased a Samsung Blu-Ray BD-P3600 player and TV. I have read all of the forums on trying to connect this to an Airport Extreme network. After several days of trying different options, I still can not get the Blu-Ray player to connect to my network and be able to stream Netflix. The only way that I have gotten close is through the wireless connection devise and putting in the IP address etc. When doing a network test, if checks the MAC Address and the IP Address, Subnet Mask, Gateway, DNS Server. It then pauses for a long time and tells me that the Gateway Ping won't work. It says, "Your network cannot operate properly." I have not had any trouble connecting any computers or printers to the network. Why can I not get this to work? Please tell me what I am doing wrong. I know just enough to be dangerous. Thank you!

Hi - I found this on CNET but not a techie so not sure if this will work - I have Airport Extreme & just bought 2 Samsung Blu-Ray BD-P3600 players to use w/NetFlix and have called Samsung tech support 3 times w/no luck - the last time the technician said that Apple/Samsung WIFI not compatible - I have a 13 character pswd so that my roommate who has a PC can connect - we don't have any problems with any other connections to Airport Extreme -
Post today from CNET discussion on same topic:
by tommyw66 - 1/6/10 4:54 PM In reply to: Samsung blu ray and Apple Airport Extreme/Express by jonmck8
found this about setting up a psp with airport should help:
"Apple does not mandate that your WEP password is the correct length. In the real world of WEP (non Apple devices) they actually require that your WEP key is a specified length dependent on the bit level of encryption. If you are using HEX or ASCII encoding these passwords can get as high as 26 to 40 characters long. Yea, thats a long pass code! Your Mac sitting in your house doesn't care about all that mumbo jumbo. You can put any old password in the AirPort Admin utility and it will take it.
I learned over at Gaming-Age that I could get away with a 13 character WEP Key. You should, however, stick with 128 bit WEP as this is better protection, and works well with the PSP (I run my AirPort Express in 802.11b/g Compatible Mode). Once you set your WEP key and update your AirPort you can setup your PSP. Now just setup your PSP for Wi-Fi Infrastructure mode"
and this:
The trick is that to use the hexadecimal key with an Apple AirPort Card, you must enter a dollar-sign before the hex number, like
$1E2B3C4FAA

Cannot add Airport Express to Airport Extreme network

I keep getting the message "There was an error setting up this Apple wireless device for WDS. Quit Airport Utility and try again." So I've tried a few times with different reset/reboot/configuration changes all to end up with the same message at the end. This problem seems to almost exactly coincide with my update to 10.5.8. At least the Extreme is finally playing nice after I restored it to the factory settings and updated it to v.5.7. This is really frustrating since I pipe my music downstairs through this Express and feed the TiVo.

I'm trying to do the same thing - extend my wireless network from my Airport Extreme to 2 more Airport Expresses. I don't have a solution yet but hopefully between us both and the help of others we can get it.
First thing I realized - I needed to go to settings on Airport Extreme and in the 'Wireless' tab check 'Allow this network to be extended'.
Instead of WDS, I plugged in the new Express and in the 'Wireless' tab chose 'Extend my wireless network' and then chose my Airport Extreme network. Still not there, as for some reason Airport Utility no longer picks up the extremes even though I've got them plugged in right here. Perhaps a reboot after this post and we'll see what happens.
One question to all - does it matter if any/all of these wireless base stations have encryption set to WPA or WEP? Would it affect the Extreme's ability to connect to the Express'?

Adding Airport Express to Existing Airport Extreme Network

I have a wireless network created by an Airport Extreme which works well but with a disppointingly small range so I bought an Airport Express with the intention of extending the original network by using the Express as a repeater (which the chap in Regent Street store told me it could do).
However when I try to join the Express to the existing Extreme network, the Airport Express does not even recognise my Airport Extreme network - do I need to connect the two via ethernet cable for this to work and, if so, what is the point of being wireless?

Ok, thanks for clarifying.
Let's double-check your extended network configuration.
o Temporarily connect both the MacBook and the 802.11n AirPort Express Base Station (AXn) directly to an available LAN (opposing-arrows) port of the 802.11n AirPort Extreme Base Station (AEBSn) for the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the AEBSn.
o Choose Manual Setup from the Base Station menu.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the AXn, and choose Manual Setup.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network (the one created by the AEBSn) you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.)

How to connect a second computer to an airport extreme network

how do I connect my macbook pro to an existing airport extreme network. The AE basestation is showing up on the macbook but when I click on it it tells me its not connected ??

How can one determine if another person has leeched
onto an Airport Extreme network? Is there a way to
list users?
Run Airport Utility, Manual Setup, Advanced button, Logs and statistics, Wireless Clients.
...just changed my password and now my internet
connection is much, much faster...the wireless
broadcasting strength was fine, but, web pages had
recently slowed to a crawl...after changing the
password download speeds returned to normal...could
someone have been leeching on the network?
Sure, if you made a more secure password, that is quite possible. Minimum recommendation is the following:
1. use WPA
2. use a password with no word from ANY dictionary
3. use a password that is a combination of letters (upper and lowercase), numbers and special characters
4. use a password at least 12 characters long.
Better yet, use a "strong" password generator, such as the one at:
https://www.grc.com/passwords.htm

Problems joining AirPort Extreme network from 10.3

Similar Messages

Maybe you are looking for