Problems Launching Dw
I recently purchased CS5. Although other applications (e.g. Photoshop, Illustrator) seem to work just fine, when I try to lauch Dw I get an error message:
"No document types have been found in the Configuration/DocumentTypes/ folder. The MMDocumentTypes.xml file may be missing or corrupted. The application will exit now."
And it closes.....
I had originally installed this software suite on a MacBookPro, but never launched it since I subsequently discovered I lacked the diskspace and memory to work with it. So I bought an iMac. I have permanently de-activated the CS5 suite from the laptop, but I still cannot get Dw to work on my desktop. The software suite cost me a small fortune, and I'd appreciate any advise or assistance the learned minds of this forum could offer an ignorant twit such as myself. Many thanks in advance!
Randy McElligott1 ,
Sorry, I can't read that to help, but...
From where are you launching? If from the Dock, try deleting and then replacing each alias that is giving you a problem. As you know, with a single click, each app's icon should only bounce once in the dock, maybe twice, before opening.
However, I'm perplexed by your statment that "This does not happen all the time."
Only thing that rings a bell from that - have you recently performed disk repair? This is done by booting from your iMac's grey-labeled Install Disc 1, get past the first (language selection) screen, then (after fully loading) the second screen will contain a "Utilities" pull-down in the menu bar. Open and select Disk Utility.
On the left side of the Disk Utility panel, select the top-most drive shown, on the right side select "First Aid" and then click the "Verify Disk" or "Repair Disk" button. Allow to run to completion. Run a second time to be sure it shows something like "No repairs needed." Do not click on "Repair Disk Permissions," but instead quit the installer version of Disk Utility and restart to your usual startup disk, which you should re-select using "Startup Disk" which is also located in the same "Utilities" pull-down where you found "Disk Utility."
After restarting, Repair Disk Permissions in a similar manner after opening the version of Disk Utility located in your Applications>Utilites folder.
Message was edited by: myhighway
Similar Messages
-
Problem launching Campaign from UI
Hi All
We have a problem launching campaign from UI screen,as when we try and launch the campaign from the screen
following error is coming:
Cannot display view BSPWD_BASICS/WorkAreaHostViewSet of UI Component CRM_UI_FRAME
An exception has occurred Exception Class CX_SHM_OUT_OF_MEMORY - Insufficient Shared Objects Memory Available
Method: CL_SHM_AREA=>_ATTACH_WRITE70
Source Text Row: 2
Error occurred during navigation
An exception has occurred Exception Class CX_BSP_WD_RUNTIME_ERROR -
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Cannot display view BSPWD_BASICS/BreadCrumbView of UI Component CRM_UI_FRAME
An exception has occurred Exception Class CX_BSP_WD_INV_VA_ASSIGNMENT - Assigned view in view area Root could not be loaded.
Method: CL_BSP_WD_HIST_MANAGER_BASE=>GET_VIEW_ASSEMBLY
Please suggest what should i do to correct this(we are working on CRM 2007)
Any help will be highly appreciated
Regards
AshishHi,
Would you please show your solutions? I am facing the same problem. Thanks!
BR,
Hao -
Problem launching admin console
Has anyone encountered a problem launching the admin console?
I get this Internet Explorer error saying, "Internet explorer has encountered a problem and needs to close, we are sorry for the inconvenience"
Thanks.Never mind, I figured it out.
-
CS6 Beta-on going problem launching CS6 Bridge. Will not open up but CS6 PS does and will work with CS5 Bridge. This obviously is a issue as others have posted this. Have also gone back via "Time Machine" and restored the original CS6 Bridge download which worked for one day, but this no longer works either. Hard to do a beta test when half the program doesn't work! *
please follow related link-
http://forums.adobe.com/message/4289169#4289169 -
Problems launching exernal .chm, part 2
We have are having major issues trying to conver our Winhelp
files to HTML. We have several .hlp files linked. Unfortunately we
can't recreate those links in our .chm files. I have read and
followed Pete Lees suggestions from the first "Problems launching
exernal .chm" thread, but they don't work. Yes, we've made sure the
.chm files are in the same directory. Each file works fine alone,
so I know the import worked. The only way I've found to get the
links to work is to import all the htmls from the second .chm into
the first. That's not acceptable. Any other ideas for us?
Thanks!Jane,
The path that you specify in the Program Parameters field
should match the actual path to the topic file inside the CHM. For
example, if you've compiled the topic file into an "html" folder
within the CHM then the path would be:
ms-its:voipgenerators.chm::/
html/sip001.htm
To double-check what the path is, open the target topic in
the CHM, right-click the topic pane, and then click Properties on
the context menu. The address shown in the Address (URL) field is
the absolute path to the topic file.
Pete -
Problem launching mail App on ipad2
Whenever I try to open the mail app it immediate closes.
The contacts, mail, calendars setting cannot be opened either. When I highlight that option, i get kicked out of settings back to the home screen.
This, also, happens when I try to access Notes settings. However, there is no problem launching the Notes app.
I've already shut down the mail app, rebooted the device and restored to the original factory settings.
My mail app includes gmail, hotmail and Lotus Mail (enterprise)
I've reloaded Lotus Mail.
Issue started last week with ios 6. I migrated to 6.0.1 with the same resultsYou might have better luck if you post this in the iPad forum. This forum is for Apple Branded Accessories.
https://discussions.apple.com/community/ipad
B-rock -
Problem launching WMP with Tiger??
HI;
I have problems launching WMP after installing Tiger on my Ibook!
I have tried re-installing WMP but that doesnt help.
Can anyone please tell me how to solve this issue?Said,
I noticed that you've posted this topic numerous times. Did you ever try iFelix's suggestion listed here?
iFelix, "any new WMP for Mac users?" #14, 06:52pm Aug 20, 2005 CDT
Brian -
I am having problems launching the standalone version of Lightroom 6 after I have gone through the install and activation process? Lightroom starts to open but "hangs" before any photos in the catalgue are displayed. I have contacted the chat support twice but they have not been able to fix the problem.
I went through the activation process yesterday and shut down my PC when I went to bed last evening. When I got up this morning and turned my PC on and then started Lightrom 6 (I upgraded from version 5) it started to launch but then just hung and became "not responsive". I I then uninstalled and then reinstalled the product today but the same thing happened. What is weird is that when I install from the standalone file I downloaded when I purchased the upgrade it looks like it's downloading the software again over the Internet? I have been having these problems for the last four or five days. I have contacted the chat support folks twice and they were able to get it working but whatever they did did not last as the problem reappeared again once the PC was shut down and then started up again.
-
Problems launching Encore 6 within Creative CLoud
I can't get Encore6 to launch
Returns a message saying it will not launch without a serial #
My CCloud membership is up to date and all other apps launch??
Help!Yes,
Fairly complex process
Uninstalled
Downloaded and ran the cleaner app from adobe
Re downloaded
Re installed
Seems to work fine now
Thanks for checking back!
Pat
In a message dated 10/5/2012 3:34:45 P.M. Pacific Daylight Time,
[email protected] writes:
Re: Problems launching Encore 6 within Creative CLoud
created by David_B_ (http://forums.adobe.com/people/David__B) in Adobe
Creative Cloud - View the full discussion
(http://forums.adobe.com/message/4753134#4753134) -
Got a problem launching Forms from e-biz 11.5.10.2 using JRE 1.6.
Our setup :
E-biz: 11.5.10.2
Forms: 6i Patchset 19
DB: 10.2.0.3
JRE: 1.6.0_07 (e-biz is config to use this version)
on windows desktop clients:
JRE: 1.6.0_13
As a non-privileged user account on the workstation, users cannot launch the forms using the 1.6.0_13 JRE.
When a privilieged(Admin) user account logs in, the forms launch fine using 1.6.0_13.
We understand that IA enforces many policy settings in our environment, but can anyone identify which types of policy settings would break this access?
Thanks everyone!
GabeThanks for the docs! We've reviewed them, and are satisfied that the JRE family of 1.6 is working properly.
Our issue is that there are some windows security policies/ maybe group policies, that are restricting the launching of the forms using the newer 1.6.0_13 JRE. This is what we are after, and I would like to know if anyone else has faced similar issue.
Some more clarification:
if the workstation has the 1.6.0_07 JRE, and a non-privileged account logs in, the forms launch fine.
Once 1.6.0_13 is pushed (as our NetAdmin is requesting), the non-privileged account cannot launch forms. Instead, they get an active X request to install 1.6.0_07, which they do not have privilege to install.
Hope this helps.
Gabe -
Problem launching flash cs5 and cs5.5 on windows vista
Hello Every Body. I have a problem launching flash cs5 and cs5.5 on windows vista home premium edition. When i launch it, the register screen appears(the one that tells the trial time left) but the flash main window always stays black (or white)and is not responding. I had it working about one week ago and i can't figure out what is the problem .It tried reinstalling couple of times without succes. I also tried deleting the left flash cs5 program files after uninstall but it didn't work . I would need your advice. Here is the screen as it appears:
BEFORE I CLICK IT IT IS BLACK9(notice that in the up bar it sais not responding)
Thanks
-jeremyskateboardhere is the black screen i get
-
I was having a problem down loading photos, so I force quite all programs. Then there was problem launching finder. Relaunched and turned computer off to reboot. Now computer starts, but does not boot up I am stopped at a white blank screen
Welcome to Apple Discussions Dathanb
You have posted in the Feedback About New Discussions forum.
As you are a first time poster, you seem to have missed the text at the top of this forum that says:
Please Read This Before Posting Here
If your question concerns a hardware or software technical issue, please do not post in this forum
Go to the main Apple Discussions page, select an appropriate product category and follow the links until you reach the correct forum for your post, then click the POST NEW TOPIC link. Because your post doesn't indicate was OS you are using on your iMac, I can't give you a link to the most appropriate forum.
Basically, though, the version of TechTool on the AppleCare disks is not compatible with newer versions of OS X and/or Macs (I can't remember which). If you don't get a satisfactory response by posting in the appropriate iMac or OS X forum, I suggest you take your iMac to the geniuses at the Apple Store. You can set up an appointment time for the same day online before you leave home.
Peggy -
Problem Launching Java Applet with Plug-in: Version 1.4.2_01
Hello out there:
I recently installed j2re-1.4.2_01 on my home computer but have been unable to access Web sites emmploying JAva applets. The following is an email exchange with Jeff Hall of Lowell Observatory, manager of an educational site hosted by Lowell, trying to resolve my problem. The messages are better understood if read in reverse order.
I'm hoping that someone will recognize the source of my problem and can recommmend a solution. I would appreciate any help offered.
Thanks,
Mike Coucke
Hi Jeff:
Well, I guess the problem lies with me somewhere. Here's my answer/status to your questions/suggestions:
1) I'm using MS Windows Me version 4.90.3000
2) I do have the directory C:\Windows\.jpi_cache\jar\, but the only thing in it is an empty folder labeled "1.0". The file LP.jar does not exist anywhere on my hard drive.
3) I tried several game sites that utilized Java applets and got the same results: the Java cup in the upper left corner followed a few seconds later by the red "X". So, evidently the problem is somewhere on my end.
I'm going to post our email exchanges in a Java Users Forum managed by Sun to see if anyone out there can solve my problem. However, if you have any more suggestions, I'll be glad to try them.
Thanks for the help.
Mike Coucke
[email protected]
----- Original Message -----
From: "Jeffrey Hall" <[email protected]>
To: "'Mike Coucke'" <[email protected]>
Sent: Friday, September 05, 2003 1:02 PM
Subject: RE: Registration with Lowell Education Online
Mike,
Rats! What version of Windows are you using? It's a little strange to
see the user directory set to C:\Windows; if you're using XP, I'd expect
it to be something like C:\Documents and Settings\Mike Coucke. In any
event, the output that is of concern is these two lines:
java.lang.ClassNotFoundException: LPRemote.class
Caused by: java.net.UnknownHostException: proxy
It looks like your browser is not finding our server's IP when it comes
time to download the necessary Java code.
LPRemote.class is the fundamental code that runs LOPARC, and your
browser should be downloading it automatically when you click connect.
LPRemote.class is stored along with a bunch of other classes in a file
called "LP.jar" that you download from our server. So, if you go to C:
in Windows Explorer and do a file search for LP.jar, you should find it.
On my machine, it's stored in a directory called ".jpi_cache\jar\" in my
user home directory. Let me know if you have this file, or the
jpi-cache directory.
One other thing you might try is going to a different site that you know
uses Java applets -- I think some of the online game rooms at Yahoo use
Java. See if other sites that use Java load correctly. Then we'll know
if it's our server specifically, or a more general problem on your end.
Jeff Hall
Lowell Observatory
Hello Jeff:
I still have the Java "blues". I followed your instructions, but am still unable to launch a LOPARC session. After an initial failure, I uninstalled all three Java versions I had (1.4.0, 1.4.1, 1.4.2), then reinstalled 1.4.2_01 from the Sun website.
Now, when I try to launch LOPARC, I initially get a blank window with the Java cup in the upper left corner. After about 20 seconds, the cup changes to a red "X". During those 20 seconds, the following appear in the IE message bar at the bottom of the window: "Applet LPRemote notinited" (their spelling) which changes to "Loading Java Applet Failed..." when the red "X" appears.
Following is a copy of the log from my Java Console during all of this:
Java(TM) Plug-in: Version 1.4.2_01
Using JRE version 1.4.2_01 Java HotSpot(TM) Client VM
User home directory = C:\WINDOWS
Proxy Configuration: Manual Configuration
Proxy: http=proxy,https=proxy,ftp=proxy,gopher=proxy
Proxy Overrides:
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
load: class LPRemote.class not found.
java.lang.ClassNotFoundException: LPRemote.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.UnknownHostException: proxy
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at sun.net.NetworkClient.doConnect(Unknown Source)
at sun.plugin.net.protocol.http.HttpClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.net.www.http.HttpClient.privilegedOpenServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.plugin.net.protocol.http.HttpClient.<init>(Unknown Source)
at sun.plugin.net.protocol.http.HttpClient.New(Unknown Source)
at sun.plugin.net.protocol.http.HttpURLConnection.createConnection(Unknown Source)
at sun.plugin.net.protocol.http.HttpURLConnection.connect(Unknown Source)
at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
I followed this up by executing the following three console commands:
"dump system properties"
"dump classholder list"
"dump thread list"
and obtained the following listings:
Dump system properties ...
acl.read = +
acl.read.default =
acl.write = +
acl.write.default =
application.home = C:\PROGRA~1\JAVA\J2RE14~1.2_0
awt.toolkit = sun.awt.windows.WToolkit
browser = sun.plugin
browser.vendor = Sun Microsystems, Inc.
browser.version = 1.1
deployment.javaws.cache.dir = C:\WINDOWS\.javaws\cache
deployment.javaws.jre.0.enabled = true
deployment.javaws.jre.0.location = http://java.sun.com/products/autodl/j2se
deployment.javaws.jre.0.osarch = x86
deployment.javaws.jre.0.osname = Windows
deployment.javaws.jre.0.path = C:\Program Files\Java\j2re1.4.2_01\bin\javaw.exe
deployment.javaws.jre.0.platform = 1.4
deployment.javaws.jre.0.product = 1.4.2_01
deployment.javaws.jre.0.registered = true
deployment.javaws.version = javaws-1.4.2_01
deployment.system.cacerts = C:\PROGRA~1\JAVA\J2RE14~1.2_0\lib\security\cacerts
deployment.system.home = C:\WINDOWS\Sun\Java\Deployment
deployment.system.jssecacerts = C:\PROGRA~1\JAVA\J2RE14~1.2_0\lib\security\cacerts
deployment.system.profile = C:\WINDOWS
deployment.system.security.policy = file:/C:/WINDOWS/Sun/Java/Deployment/security/java.policy
deployment.user.cachedir = C:\WINDOWS\Application Data\Sun\Java\Deployment\cache
deployment.user.certs = C:\WINDOWS\Application Data\Sun\Java\Deployment\security\deployment.certs
deployment.user.extdir = C:\WINDOWS\Application Data\Sun\Java\Deployment\ext
deployment.user.home = C:\WINDOWS\Application Data\Sun\Java\Deployment
deployment.user.jssecerts = C:\WINDOWS\Application Data\Sun\Java\Deployment\security\deployment.jssecerts
deployment.user.logdir = C:\WINDOWS\Application Data\Sun\Java\Deployment\log
deployment.user.profile = C:\WINDOWS\Application Data
deployment.user.security.policy = file:/C:/WINDOWS/Application%20Data/Sun/Java/Deployment/security/java.policy
deployment.user.tmpdir = C:\WINDOWS\Application Data\Sun\Java\Deployment\cache\tmp
file.encoding = Cp1252
file.encoding.pkg = sun.io
file.separator = \
file.separator.applet = true
http.agent = Mozilla/4.0 (Windows Me 4.90)
http.auth.serializeRequests = true
https.protocols = SSLv3,SSLv2Hello
java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
java.awt.printerjob = sun.awt.windows.WPrinterJob
java.class.path = C:\PROGRA~1\JAVA\J2RE14~1.2_0\classes
java.class.version = 48.0
java.class.version.applet = true
java.endorsed.dirs = C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\endorsed
java.ext.dirs = C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\ext
java.home = C:\PROGRA~1\JAVA\J2RE14~1.2_0
java.io.tmpdir = C:\WINDOWS\TEMP\
java.library.path = D:\PROGRAM FILES\INTERNET EXPLORER 6;.;C:\WINDOWS\SYSTEM;C:\WINDOWS;D:\PROGRA~1\INTERN~1;;C:\WINDOWS;C:\WINDOWS\COMMAND
java.protocol.handler.pkgs = sun.plugin.net.protocol|sun.plugin.net.protocol
java.runtime.name = Java(TM) 2 Runtime Environment, Standard Edition
java.runtime.version = 1.4.2_01-b06
java.specification.name = Java Platform API Specification
java.specification.vendor = Sun Microsystems Inc.
java.specification.version = 1.4
java.util.prefs.PreferencesFactory = java.util.prefs.WindowsPreferencesFactory
java.vendor = Sun Microsystems Inc.
java.vendor.applet = true
java.vendor.url = http://java.sun.com/
java.vendor.url.applet = true
java.vendor.url.bug = http://java.sun.com/cgi-bin/bugreport.cgi
java.version = 1.4.2_01
java.version.applet = true
java.vm.info = mixed mode
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = Sun Microsystems Inc.
java.vm.version = 1.4.2_01-b06
javaplugin.maxHeapSize = 96m
javaplugin.nodotversion = 142_01
javaplugin.proxy.config.list = http=proxy,https=proxy,ftp=proxy,gopher=proxy
javaplugin.proxy.config.type = manual
javaplugin.version = 1.4.2_01
javaplugin.vm.options = -Djava.class.path=C:\PROGRA~1\JAVA\J2RE14~1.2_0\classes -Xbootclasspath/a:C:\PROGRA~1\JAVA\J2RE14~1.2_0\lib\plugin.jar -Xmx96m -Djavaplugin.maxHeapSize=96m -Xverify:remote -Djavaplugin.version=1.4.2_01 -Djavaplugin.nodotversion=142_01 -Dbrowser=sun.plugin -DtrustProxy=true -Dapplication.home=C:\PROGRA~1\JAVA\J2RE14~1.2_0 -Djava.protocol.handler.pkgs=sun.plugin.net.protocol
line.separator = \r\n
line.separator.applet = true
os.arch = x86
os.arch.applet = true
os.name = Windows Me
os.name.applet = true
os.version = 4.90
os.version.applet = true
package.restrict.access.netscape = false
package.restrict.access.sun = true
package.restrict.definition.java = true
package.restrict.definition.netscape = true
package.restrict.definition.sun = true
path.separator = ;
path.separator.applet = true
sun.arch.data.model = 32
sun.boot.class.path = C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\rt.jar;C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\i18n.jar;C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\sunrsasign.jar;C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\jsse.jar;C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\jce.jar;C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\charsets.jar;C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\classes;C:\PROGRA~1\JAVA\J2RE14~1.2_0\lib\plugin.jar
sun.boot.library.path = C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\bin
sun.cpu.endian = little
sun.cpu.isalist = pentium i486 i386
sun.io.unicode.encoding = UnicodeLittle
sun.java2d.fontpath =
sun.net.client.defaultConnectTimeout = 120000
sun.os.patch.level =
trustProxy = true
user.country = US
user.dir = C:\WINDOWS\Desktop
user.home = C:\WINDOWS
user.language = en
user.name = Michael G. Coucke
user.timezone =
user.variant =
Done.
Dump classloader list ...
codebase=http://kraken.lowell.edu/, key=http://kraken.lowell.edu/,IONJava/classes/ion_16.jar,IONJava/classes/LP.jar, zombie=false, cache=true, refcount=1, info=sun.plugin.ClassLoaderInfo@109de5b
Done.
Dump thread list ...
Group main,ac=11,agc=2,pri=10
main,5,alive
AWT-Windows,6,alive,dameon
AWT-Shutdown,5,alive
Java2D Disposer,10,alive,dameon
AWT-EventQueue-0,6,alive
Group Plugin Thread Group,ac=3,agc=0,pri=10
Main Console Writer,6,alive
AWT-EventQueue-1,6,alive
TimerQueue,5,alive,dameon
Group http://kraken.lowell.edu/-threadGroup,ac=2,agc=0,pri=4
thread applet-LPRemote.class,4,alive
AWT-EventQueue-2,4,alive
Done.
I'm not a Java expert, so this may be more information than you ever wanted to see.
Once again, I hope that you can help. My experience has been that I usually have some obscure option set incorrectly and that causes me great grief.
Thanks fo your help,
Mike Coucke
[email protected]
----- Original Message -----
From: "Jeffrey Hall" <[email protected]>
To: "'Mike Coucke'" <[email protected]>
Sent: Thursday, September 04, 2003 11:48 AM
Subject: RE: Registration with Lowell Education Online
Hi Mike,
Try it now. I think this problem has arisen because Sun just
released a new version of the Plug-in (1.4.2), and when we released the
public beta of LOPARC, only one relevant version (1.4.0) was available
and the LOPARC code was written to look for that by default. I have
just recoded the relevant routines so they should now cause your browser
to simply pick up the latest 1.4 version of the Plug-in you have
installed, whatever it is. I "broke" Java on my machine to replicate
your problem, and the code I inserted today did fix it. Hopefully it
will have the same effect for you. I am running IE 6 and plugin
1.4.2_01 (as accessed via Tools->Sun Java Console).
One broader problem: some (non-LOPARC-specific) users on the Sun
forums have reported the "JRE collision" you are seeing when multiple
versions of the Plug-in are installed on the same machine. So if the
fix I made to our code doesn't work, one option would be to uninstall
all Java components from your computer and do a fresh install of the
latest runtime environment.
Let me know how/if this works. Thanks for the feedback and for your
patience.
Best regards,
Jeff Hall
Lowell Observatory
-----Original Message-----
From: Mike Coucke [mailto:[email protected]]
Sent: Wednesday, September 03, 2003 6:30 PM
To: [email protected]
Subject: Re: Registration with Lowell Education Online
Hello Jeff:
So far, I have been unable to launch a LOPARC session. I repeatedly
get the following error message:
"Exception: java.lang.ClassNotFoundException: LPRemote.class"
My browser is MS Internet Explorer version 6.0.2800.1106 Initially I was
using Java Plug-In version 1.4.1 and received the error message. I went
to the Sun website and downloaded/installed Java Plug-In version 1.4.2
and still get the message.
Before I try to launch LOPARC, I can select Tools->Sun Java Console from
IE's pull down menu to check my Java Plug-In version. When I try to
launch LOPARC, I get the following message:
"Applet(s) in this HTML page requires a version of Java different from
the one the browser is currently using. In order to run the applet(s)
in this HTML page, a new browser session is required, press 'Yes' to
start a new browser session." If I select 'No', I get the following
message: "Java Plug-in detected JRE collission"
If I select 'Yes', a new browser window opens and then I get the first
message above.
Can you help?
Mike Coucke
[email protected]
----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Monday, September 01, 2003 5:30 PM
Subject: Registration with Lowell Education Online
September 1, 2003
Dear Michael Coucke:
Thank you for registering with Lowell Observatory's online education
site. We hope you enjoy using it and visit regularly as we continue to
expand its features and capabilities. This is a one-time welcoming
email.
For your records, your user ID is xxxxx, and your password is #########.
You'll need to supply these each time you log in.
This site gives you access to research-grade equipment including a 16"
telescope, CCD detector, and image processing software. Our online
archive of data is now available 24/7. The telescope will be opening to
our onsite users in May, and on select nights to the Internet at large
in June.
We have designed this site so you don't need a huge monitor or a
supercomputer to use it. All pages are viewable on screens running at
800x600 resolution or higher. To use LOPARC, you'll need a Java-enabled
browser with the Java 1.4 plug-in installed. If you don't have the
plug-in, you'll be prompted to download it the first time you attempt to
connect. This is an admittedly large (9 MB) but one-time-only download.
This site works correctly under Internet Explorer version 5 or higher.
If you use Netscape, you must be running version 6 or higher, and
display or applet behavior anomalies may occur.
If at any time you can't connect to our server, simply try again later.
We do experience several power outages each year, particularly during
Flagstaff's summer thunderstorm season. Our server is fully protected
and backed up, and can be quickly brought back on line, but any active
user sessions will be lost. Thanks for your patience during these
inevitable downtimes.
Your questions, comments, suggestions, and bug reports about this site
are always welcome. On behalf of the LOPARC development team, thanks
for signing up!
Jeffrey Hall
Assistant Research Scientist
Associate Director, Education and Special Programs
Lowell Observatory
Flagstaff, ArizonaHi Mike,
I see this in your logs:
Java(TM) Plug-in: Version 1.4.2_01
Using JRE version 1.4.2_01 Java HotSpot(TM) Client VM
User home directory = C:\WINDOWS
Proxy Configuration: Manual Configuration
Proxy: http=proxy,https=proxy,ftp=proxy,gopher=proxy
Proxy Overrides:
I just helped my Dad set up his computer with a new
cable modem, and had the situation where we couldn't
access any secure Web sites. The cable folks had us
disable the proxy. It looks like the error message is
saying it can't find your proxy server, and the logs
you posted say that you've decided to configure your
proxy manually, rather than using the settings from
IE (which is how mine is set up in the plugin
control panel.)
Could that be the problem?
--Steve -
Problem launching a jsp page with eclipse and tomcat
Hi,
I have just started using eclipse and tomcat for creating dynamic web pages. I tried to launch a jsp page after starting the tomcat server with the URL: http://locahost:8080/HelloWorld/, an error page was displayed as below:
HTTP Status 404 -/
type Status report
message /_
description The requested resource (-) is not available
Apache Tomcat/5.5.17
I didn't get any error at the console and when i just typed http://localhost, a pop up menu saying that the connection was refused when attempting to contact localhost.
I'm not sure what is the problem here. Could it be the permssion to the localhost is not granted by the system as the eclipse IDE is running using linux?
Hope someone can help.
Thanks.http://www-128.ibm.com/developerworks/library/os-ectom/
-
Problems launching Bridge from Photoshop and opening files as smart objects in Photoshop from Lightr
I am running Photoshop CC (up to date as of today) and Lightroom 5.2. I am hitting 2 major problems. In Photoshop if I select File/Browse in Bridge I get the following message
"Could not complete the Browse in Bridge command because Photoshop was unable to find the JavaScript plug-in".
However if I simply launch Bridge as an application it works ok (now I have reset the default application for all the appropriate file extentions to Photoshop CC rather than Photoshop in Bridge preferences) and opens the file in Camera Raw 8.2 in Photoshop when a Raw file is double clicked.
The second problem is associated with opening raw files in Lightroom 5.2, editing and then trying to "photo/edit in/Open as smart object in Photoshop" . In this case Photoshop opens with a blank screen and nothing happens Eventually about a minute later this message appears in Lightroom 5.2
"The file could not be edited because Adobe Photoshop CC could not be launched."
Rather strange message as the first thing that happened was that Photoshop CC opened!!
Same thing happens if try "photo/Edit in/Edit in Adobe Photoshop CC" except that having shut down photoshop I see a message from Lightroom 5.2 saying
Lightoom was unable to prepare the selected file at ..... for editing. It will not be opened.
When I click the OK button on this message low and behold the tif version of the RAW file opens in Photoshop. ready for futher editing with all the Lightroom edits applied.
Can anyone help me in sorting out this problem please
Operating system is Windows 8 64 bit and I am running the 64 bit Adobe applications.Solved the problems by uninstalling Bridge and Photoshop then going into Creative Cloud App and re-installing both.
-
Problem launching bridge in CS6
I have been trying to launch bridge for hours in CS6 ,having no luck, tried the command- option -o , have uninstalled and re-installed and still no luck.... ? any hints please
thanks, ok, running mac, mountain lion, I have installed CS6, when I launch bridge I get "waiting for bridge cs6" at the bottom of the opened photoshop page, there is a ' br' symbol next to mini bridge but nothing happens when i click on it. I have also gone up to 'file' open in bridge and also mini bridge but nothing there either. I have been to adobes help page and followed instructions to try to remedy the problem but to no avail. Also tried opening camera raw from the > photoshop > preferences > camera raw but no luck either..
thanks again
Col
Maybe you are looking for
-
W7 ult. HP 6500APLUS Aio says it's online and still won't print from computer
The printer says it's connected to network with num. address and full bars. Still it refuses to print anything I send from the printer. It worked excellent with no trouble installation, or during the last 9 mos. and then it decided, for no appartent
-
Howdy. I do produce video and audio for people. I am doing a project now where the clients dont even live in the same town or state. I would like to have a Mac Mini set up in the future where i can put the file on the hard drive and then send a link
-
What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?
-
Date formatting, too many decimal places for milliseconds.
Is there any cirmumstance where the SimpleDateFormat string of: "yyyy.MM.dd HH:mm:ss.SS " could result in some dates being output correctly with two digits for milliseconds, and others being output with three digits!
-
Dynamic query structures with restrictions - is this possible
Hi experts, We have a client that has hard coded query structures, much to our chagrin. These structures change quarterly and because the structures are used across several queries and workbooks, I need to find a new solution that will makes the dyn