Problems load / sync apps

Hello
I have a new BB and downloaded a few apps either via laptop. But I cannot get them to load via BDM, they are not recognized as apps. The ones that I have downloaded via OTA are recognized on the BB device, but I cannot get them to work, they will not even show up in the BDM Add-in Module Configuration list, when I try to sync them with my laptop.
The apps are made for BB Bold OS (e.g. most recent version of SplashID.
BB Bold 9700/ Device Code 5.0.0.x/ BDM 5.0.1.37
Carrier: Swisscom (Switzerland)
I am sure it is something simple. Can you help?
Kind regards, Peter
Solved!
Go to Solution.

I have re-installed from scratch and it works

Similar Messages

Sync problem, cannot sync apps to iPhone from iTunes. i did it before. but now it just take backup.

sync problem, cannot sync apps to iPhone from iTunes. i did it before. but now it just take backup. anyone plz help...

Connect & select iPhone in iTunes Sudebar (iTunes > View > Show Sidebar), in Music tap (right pane top), select Sync Music and the music you want on iPhone then click Apply button (bottom right).
http://support.apple.com/kb/VI72

Problem with syncing apps in iTunes

Hello Apple Support Communities
I have recently synced my iPod, and I saw that the 'Sync Apps' option was unchecked.
I checked it, and I synced my iPod, and it said to authorise my Apple ID.
After I authorised my Apple ID, it said that it is already authorised and when I click OK, it says the same message.
Any way I can solve this problem?
Screenshot:

hi clicked apply got pop up message saying it couldnt transfer bbc or itv player , then i clicked apply got message in bar beside apple sign saying it was determining which apps to sync then it appears as if it has done the sync/transfer The apps that where on my phone before i reformatted my computers hard drive still show up on the phone but the new apps i downloaded after i reformatted my hard drive and authorised the new computer these new apps show up in itunes library and they show up when i tick and select them then click apply and sync and it seems to go through the process but they still dont appear on the phone help please

Problems with syncing apps

Recently my computer crashed so I restored it to its original state. Now, when i try to sync my iPhone the apps don't sync. On the App page in iTunes there are no apps listed on the left side of the screen and the screenshot of my iPhone is somewhat grayed out so I can't move apps around and i can't even select a different page to view.
The check box by Sync Apps above where the list of apps should be is unchecked. If i check the box it says that the apps from the computer will overwrite the apps on my phone and since there are no apps on the computer it appears like it will delete everything except the original iPhone apps. All the homescreens (on the screenshot on the right side) go blank - as though everything will be deleted - except for the original apps.
Where are the apps supposed to be backed up on the computer? I thought I used to have a fairly easy way to access the folder where the apps are synced to but i can't remember how to get to them. In my iTunes library there is a folder called Mobile Applications where all my apps are stored (since my last sync before my computer crashed) but they don't show up in my apps list in iTunes. Is there some way to make them show up or are they stored in the correct folder?
Or, if I set the check box to Sync Apps will that copy my apps from my iPhone to my computer that aren't saved on my computer AS WELL as overwriting ones that are on my computer (which is none as far as iTunes is concerned) onto my iPhone? There are a few paid apps that i have deleted from my iPhone but are backed up on my computer. How can I get them back since it doesn't seem to be syncing properly and iTunes isn't recognizing the folder that they are in?
I just don't want to end up having most of my apps deleted and can't get them back so before i go any further I would like some input on this.

All 3rd party apps on your iPhone should be in your iTunes library on your computer, which is the same for all iTunes content on your iPhone. Your iTunes library on your computer - the iTunes named folder in your Music folder should be included with your computer's backup along with all other important data on your computer's hard drive. The iPhone is not designed or intended to be used as a backup storage device or as an external drive for transferring data from one computer to another.
Did you lose all important data on your computer's hard drive due to this crash, or your iTunes library only?
The sync process for iTunes content is a one way transfer process only - from your iTunes library on your computer to your iPhone, and the same for photos transferred from your computer.
In regards to iTunes content, an iPhone can be synced with an iTunes library on a single computer only, and photos can be transferred from a single computer only. When transferring iTunes content and photos from another computer, all iTunes content and photos transferred from a different computer will be erased from the iPhone first.
After restoring your computer to its original state, your computer is detected as a new or different computer. This would not be a problem if you maintained a backup for all important data on your computer which should include your iTunes library stored on an external drive or some other external media used for backup purposes only.
iTunes includes an option to transfer iTunes content that was purchased/downloaded from the iTunes store from an iPod or iPhone, but this is for iTunes content that was purchased/downloaded from the iTunes store only.
First you need to re-authorize your computer with your iTunes account with iTunes. With your iPhone connected to iTunes and without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone.

Problems with Syncing Apps on iPhone 4s

Since I migrated to iPhone4S, I am having problems with my syncing of Apps. All the new Apps I buy, do not get automatically transferred to my iPhone. Further, I am also not able to go to the APPS section of iTunes and change any configuration since complete page is greyed out and I am not able to access it. Does anyone out there a suitable solution for this issue? Would appreciate if someone can help me with this problem.

I have a Black 4S and it has the exact same problem - using flash means pictures in fog - totally unusable. Like you, I removed the case, checked the lens, everything. I have no idea why this happens but it makes flash photograph totally useless. I think I will see if Apple would care to make good a guarantee on it's apparently defective phone camera.

Re: Problem loading web app on 6.0

Charlie,
          Thanks for your advice; however, my problem still persists, and is baffling as ever. I've
          completely blown away my /kiko directory and copied config.xml.FROM_INSTALLER to config.xml in
          hopes of reverting back to a clean install; however like I originally stated, if I try to start my
          server with this supposedly "virgin" server, I still get the following error:
          Jan 18, 2001 2:54:31 PM PST> <Error> <HTTP> <[HTTP myserver] Error parsing descriptor in Web
          appplication "./config/mydomain/applications/DefaultWebApp_myserver"
          org.xml.sax.SAXParseException: File "file:///MTI/home/gchuang/weblogic/wlserver6.0/web.xml" not
          found.
          at weblogic.apache.xerces.framework.XMLParser.reportError(XMLParser.java:1014)
          at
          weblogic.apache.xerces.readers.DefaultEntityHandler.startReadingFromDocument(DefaultEntityHandler.ja
          va:512)
          at weblogic.apache.xerces.framework.XMLParser.parseSomeSetup(XMLParser.java:304)
          at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:899)
          What's going on???? /DefaultWebApp_myserver existed from installation, and I did NOT touch, but now
          is made inoperable as well? I've blown away the suspect directory, /kiko, and yet... Anything short
          of re-installing, how do I get Weblogic to work again?
          Gene Chuang
          Join Kiko.com!
          "Charlie Crook" <[email protected]> wrote in message news:[email protected]...
          > Are your web.xml & weblogic.xml files within the applications's WEB-INF
          > directory? The WEB-INF must be directly below the application's
          > irectory - kiko\WEB-INF in your case - and not kiko\html\WEB-INF.
          >
          >
          >
          > "Gene Chuang" <[email protected]> wrote in message
          > news:[email protected]...
          > > I did a clean install of 6.0 and was able to run startWeblogic.sh and get
          > /console.
          > >
          > > I became bold and tried copying my web app into /applications directory;
          > This web app is an
          > > expanded directory, and looks like the following:
          > >
          > > applications/kiko/
          > > applications/kiko/html/
          > > applications/kiko/html/WEB-INF/web.xml, weblogic.xml
          > > applications/kiko/html/bunch of .jsps and subdirs with .jsps
          > >
          > > So when I made the kiko symlink onto /applications, I noticed in the
          > weblogic log that this web app
          > > has been detected; when I try to hit /html/index.jsp, I get a bunch of
          > class cast exception (which
          > > I expected because I did not modify startWeblogic.sh's CLASSPATH to
          > include my stuff yet...)
          > >
          > > The problem starts when I kill the server and restart again; here's what
          > I get from the log:
          > >
          > > ####<Jan 18, 2001 12:12:03 PM PST> <Info> <HTTP> <fortran.kikolb.com>
          > <myserver> <main> <system> <>
          > > <101053> <[HTTP myserver] Loadin
          > > g web app: html>
          > > ####<Jan 18, 2001 12:12:03 PM PST> <Info> <HTTP> <fortran.kikolb.com>
          > <myserver> <main> <system> <>
          > > <101060> <[HTTP myserver] Loadin
          > > g html from directory: ./config/mydomain/applications/kiko/html>
          > > ####<Jan 18, 2001 12:12:03 PM PST> <Error> <HTTP> <fortran.kikolb.com>
          > <myserver> <main> <system> <>
          > > <101063> <[HTTP myserver] Error
          > > parsing descriptor in Web appplication
          > "./config/mydomain/applications/kiko/html">
          > > org.xml.sax.SAXParseException: File
          > "file:///MTI/home/gchuang/weblogic/wlserver6.0/web.xml" not
          > > found.
          > > at
          > weblogic.apache.xerces.framework.XMLParser.reportError(XMLParser.java:1014)
          > > at
          > >
          > weblogic.apache.xerces.readers.DefaultEntityHandler.startReadingFromDocument
          > (DefaultEntityHandler.ja
          > > va:512)
          > > at
          > weblogic.apache.xerces.framework.XMLParser.parseSomeSetup(XMLParser.java:304
          > )
          > > at
          > weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:899)
          > > at
          > weblogic.apache.xerces.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.ja
          > va:123)
          > > at
          > javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:171)
          > >
          > > I have no idea why WL is trying to find web.xml in WL_HOME; but I figured
          > since this only started
          > > when I tried installing my web app, I'll get rid of it. I deleted the
          > /applications/kiko/ symlink
          > > and tried restarting WL. Now I get this:
          > >
          > > ####<Jan 18, 2001 12:19:52 PM PST> <Info> <HTTP> <fortran.kikolb.com>
          > <myserver> <main> <system> <>
          > > <101053> <[HTTP myserver] Loadin
          > > g web app: DefaultWebApp_myserver>
          > > ####<Jan 18, 2001 12:19:52 PM PST> <Info> <HTTP> <fortran.kikolb.com>
          > <myserver> <main> <system> <>
          > > <101060> <[HTTP myserver] Loadin
          > > g DefaultWebApp_myserver from directory:
          > ./config/mydomain/applications/DefaultWebApp_myserver>
          > > ####<Jan 18, 2001 12:19:52 PM PST> <Error> <HTTP> <fortran.kikolb.com>
          > <myserver> <main> <system> <>
          > > <101063> <[HTTP myserver] Error
          > > parsing descriptor in Web appplication
          > "./config/mydomain/applications/DefaultWebApp_myserver">
          > > org.xml.sax.SAXParseException: File
          > "file:///MTI/home/gchuang/weblogic/wlserver6.0/web.xml" not
          > > found.
          > > at
          > weblogic.apache.xerces.framework.XMLParser.reportError(XMLParser.java:1014)
          > > at
          > >
          > weblogic.apache.xerces.readers.DefaultEntityHandler.startReadingFromDocument
          > (DefaultEntityHandler.ja
          > > va:512)
          > > at
          > weblogic.apache.xerces.framework.XMLParser.parseSomeSetup(XMLParser.java:304
          > )
          > > at
          > weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:899)
          > > at
          > weblogic.apache.xerces.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.ja
          > va:123)
          > > at
          > javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:171)
          > >
          > > What's going on? Did my install of a web app permanently kill my Weblogic
          > install? I can't get it
          > > to start anymore!
          > >
          > > --
          > > Gene Chuang
          > > Join Kiko.com!
          > >
          > >
          >
          >


the symlink, /applications/kiko, is gone; I blew it away... so now the /applications directory
          looks like this:
          /applications/DefaultWebApp_myserver/
          /applications/certificate.war
          /applications/console.war
          Gene Chuang
          Join Kiko.com!
          "Dimitri Rakitine" <[email protected]> wrote in message news:[email protected]...
          > Can it be that something was (and still is) wrong with the links you created?
          >
          > In weblogic.developer.interest.servlet Gene Chuang <[email protected]> wrote:
          > > Charlie,
          >
          > > Thanks for your advice; however, my problem still persists, and is baffling as ever. I've
          > > completely blown away my /kiko directory and copied config.xml.FROM_INSTALLER to config.xml in
          > > hopes of reverting back to a clean install; however like I originally stated, if I try to start
          my
          > > server with this supposedly "virgin" server, I still get the following error:
          >
          > > Jan 18, 2001 2:54:31 PM PST> <Error> <HTTP> <[HTTP myserver] Error parsing descriptor in Web
          > > appplication "./config/mydomain/applications/DefaultWebApp_myserver"
          > > org.xml.sax.SAXParseException: File "file:///MTI/home/gchuang/weblogic/wlserver6.0/web.xml" not
          > > found.
          > > at weblogic.apache.xerces.framework.XMLParser.reportError(XMLParser.java:1014)
          > > at
          > >
          weblogic.apache.xerces.readers.DefaultEntityHandler.startReadingFromDocument(DefaultEntityHandler.ja
          > > va:512)
          > > at weblogic.apache.xerces.framework.XMLParser.parseSomeSetup(XMLParser.java:304)
          > > at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:899)
          >
          > > What's going on???? /DefaultWebApp_myserver existed from installation, and I did NOT touch, but
          now
          > > is made inoperable as well? I've blown away the suspect directory, /kiko, and yet... Anything
          short
          > > of re-installing, how do I get Weblogic to work again?
          >
          > > --
          > > Gene Chuang
          > > Join Kiko.com!
          >
          > > "Charlie Crook" <[email protected]> wrote in message news:[email protected]...
          > >> Are your web.xml & weblogic.xml files within the applications's WEB-INF
          > >> directory? The WEB-INF must be directly below the application's
          > >> irectory - kiko\WEB-INF in your case - and not kiko\html\WEB-INF.
          > >>
          > >>
          > >>
          > >> "Gene Chuang" <[email protected]> wrote in message
          > >> news:[email protected]...
          > >> > I did a clean install of 6.0 and was able to run startWeblogic.sh and get
          > >> /console.
          > >> >
          > >> > I became bold and tried copying my web app into /applications directory;
          > >> This web app is an
          > >> > expanded directory, and looks like the following:
          > >> >
          > >> > applications/kiko/
          > >> > applications/kiko/html/
          > >> > applications/kiko/html/WEB-INF/web.xml, weblogic.xml
          > >> > applications/kiko/html/bunch of .jsps and subdirs with .jsps
          > >> >
          > >> > So when I made the kiko symlink onto /applications, I noticed in the
          > >> weblogic log that this web app
          > >> > has been detected; when I try to hit /html/index.jsp, I get a bunch of
          > >> class cast exception (which
          > >> > I expected because I did not modify startWeblogic.sh's CLASSPATH to
          > >> include my stuff yet...)
          > >> >
          > >> > The problem starts when I kill the server and restart again; here's what
          > >> I get from the log:
          > >> >
          > >> > ####<Jan 18, 2001 12:12:03 PM PST> <Info> <HTTP> <fortran.kikolb.com>
          > >> <myserver> <main> <system> <>
          > >> > <101053> <[HTTP myserver] Loadin
          > >> > g web app: html>
          > >> > ####<Jan 18, 2001 12:12:03 PM PST> <Info> <HTTP> <fortran.kikolb.com>
          > >> <myserver> <main> <system> <>
          > >> > <101060> <[HTTP myserver] Loadin
          > >> > g html from directory: ./config/mydomain/applications/kiko/html>
          > >> > ####<Jan 18, 2001 12:12:03 PM PST> <Error> <HTTP> <fortran.kikolb.com>
          > >> <myserver> <main> <system> <>
          > >> > <101063> <[HTTP myserver] Error
          > >> > parsing descriptor in Web appplication
          > >> "./config/mydomain/applications/kiko/html">
          > >> > org.xml.sax.SAXParseException: File
          > >> "file:///MTI/home/gchuang/weblogic/wlserver6.0/web.xml" not
          > >> > found.
          > >> > at
          > >> weblogic.apache.xerces.framework.XMLParser.reportError(XMLParser.java:1014)
          > >> > at
          > >> >
          > >> weblogic.apache.xerces.readers.DefaultEntityHandler.startReadingFromDocument
          > >> (DefaultEntityHandler.ja
          > >> > va:512)
          > >> > at
          > >> weblogic.apache.xerces.framework.XMLParser.parseSomeSetup(XMLParser.java:304
          > >> )
          > >> > at
          > >> weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:899)
          > >> > at
          > >> weblogic.apache.xerces.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.ja
          > >> va:123)
          > >> > at
          > >> javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:171)
          > >> >
          > >> > I have no idea why WL is trying to find web.xml in WL_HOME; but I figured
          > >> since this only started
          > >> > when I tried installing my web app, I'll get rid of it. I deleted the
          > >> /applications/kiko/ symlink
          > >> > and tried restarting WL. Now I get this:
          > >> >
          > >> > ####<Jan 18, 2001 12:19:52 PM PST> <Info> <HTTP> <fortran.kikolb.com>
          > >> <myserver> <main> <system> <>
          > >> > <101053> <[HTTP myserver] Loadin
          > >> > g web app: DefaultWebApp_myserver>
          > >> > ####<Jan 18, 2001 12:19:52 PM PST> <Info> <HTTP> <fortran.kikolb.com>
          > >> <myserver> <main> <system> <>
          > >> > <101060> <[HTTP myserver] Loadin
          > >> > g DefaultWebApp_myserver from directory:
          > >> ./config/mydomain/applications/DefaultWebApp_myserver>
          > >> > ####<Jan 18, 2001 12:19:52 PM PST> <Error> <HTTP> <fortran.kikolb.com>
          > >> <myserver> <main> <system> <>
          > >> > <101063> <[HTTP myserver] Error
          > >> > parsing descriptor in Web appplication
          > >> "./config/mydomain/applications/DefaultWebApp_myserver">
          > >> > org.xml.sax.SAXParseException: File
          > >> "file:///MTI/home/gchuang/weblogic/wlserver6.0/web.xml" not
          > >> > found.
          > >> > at
          > >> weblogic.apache.xerces.framework.XMLParser.reportError(XMLParser.java:1014)
          > >> > at
          > >> >
          > >> weblogic.apache.xerces.readers.DefaultEntityHandler.startReadingFromDocument
          > >> (DefaultEntityHandler.ja
          > >> > va:512)
          > >> > at
          > >> weblogic.apache.xerces.framework.XMLParser.parseSomeSetup(XMLParser.java:304
          > >> )
          > >> > at
          > >> weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:899)
          > >> > at
          > >> weblogic.apache.xerces.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.ja
          > >> va:123)
          > >> > at
          > >> javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:171)
          > >> >
          > >> > What's going on? Did my install of a web app permanently kill my Weblogic
          > >> install? I can't get it
          > >> > to start anymore!
          > >> >
          > >> > --
          > >> > Gene Chuang
          > >> > Join Kiko.com!
          > >> >
          > >> >
          > >>
          > >>
          >
          >
          >
          > --
          > Dimitri

IPhone 4S - problems loading the app store to the correct app

Sorry for the cross-post, but I think I accidentally posted this in the wrong place.
This problem is only occurring on the iPhone 4S, iPhone 4 is fine. We were hoping iOS 5.1 would fix the problem but it hasn't. The problem is very easy to replicate but I have been googling and can't find any discussion of it. To replicate:
1. Launch app store and navigate to any random page. (Say Categories : Business : TurboScan)
2. Close app store (not fully close, just press Home/close button), navigate to Safari, and click either of these links to our app:
http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewSoftware?id=307386350&mt=8
or
itms-apps://itunes.com/apps/directv
(actually the post editor won't let me make a regular anchor tag out of this one, so you'll have to paste it into your address bar)
The app store opens to the previous page that I had open (in this case TurboScan info page), not the Directv app which we are trying to direct the user to install.
If we close the app store and then click the link, it launches to the DTV app as expected. Also after some undetermined period of time (roughly 10 minutes) the problem seems to go away and the app store launches correctly to our app.
Any help on this issue would be massively appreciated.
Thanks,
Matt

FYI - I meant to say that to get the app store to work properly you need to fully close it by double-clicking the home button.

Problems syncing apps with 10.3.1

recently i have had problems syncing app updates on my ipad since i updated to 10.3.1. i did a restore on the ipad thinking that there was a problem with the operating system. it froze during the restore and every time i tried after that. i was able to restore on a different computer with an older version of itunes and was able to sync apps from that computer. i tried to sync apps again on the origional computer and when i do it takes an hour for them to all load on but at the end i get an error that says some of the apps in your library were not installed on the ipad because one or more errors occured. i have reinstalled itunes several times and also reinstalled the apple moble device drivers. every time i trie to sync apps i use a new back up file so there would be no corrupted files. i have also gone to apple and they gave me a new ipad. please help i dont know what to do.

i have downgraded to versio 10.2.2 and i still have the same issues. I have also tried deleting then redownloading the apps to see if a new version will correct the problem however i have had no success. please tell me every idea that you might have to fix the problems i am having.

On Sync, Apps Try to Load on Multiple iPhones

Folks... I've got something driving me crazy may actually be a simple fix, but I cannot seem to find the solution.
I have 5 family iPhones sync'ing to the same MacPro. My kids all have many many apps, and my wife and I only have 5-8 each. The problem I am finding is that everytime we plug a phone in, iTunes attempts to load ALL of the apps that are on Phones that have attached and sync'd.
Any ideas on how I can make sure that EACH phone only syncs the apps that were attached to that specific account? Before you say "log in to iTunes for each phone when you sync" --- that does not work.
But, if I just turn off 'Sync Apps', iTunes says "if you continue all existing apps on this iPhone will be removed'.
Thanks for the help
Brandon

Did you already try to reset the iPad by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data, but it can clear some glitches after installing new software or apps.

Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441)

Whenever i try to sync apps, tones, music etc, it says me to authorize my computer. But i had already authorized it and had even signed into my account. Can you please help me? I am facing this problems since long. please.

Hey there.
Please help me.
Whenever i try to sync apps, tones, music etc, it says me to authorize my computer. But i had already authorized it and had even signed into my account. Can you please help me? I am facing this problems since long. please.
It goes like this.
Whenever i connect my iPhone5, it starts to sync. later when it reaches the 4th stage of 'Tranferring Purchases' it stops and says me to Authorize my computer.
But i had already authorized it and even signed my apple id.
Moreover, i have only authorized 1 out of my 5 computers.
Please help me.
I have been facing this from long.
Thank You.

Hi Rameez,
Thanks for visiting Apple Support Communities.
The steps in this article can help if iTunes is asking you to authorize your computer repeatedly:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Best,
Jeremy

Hiii . i have encountere a problem . my notes app are not syncing in my ipad and iphone . plz help

hiii . i have encountere a problem . my notes app are not syncing in my ipad and iphone . plz help

Hi marcmartineau,
I'm not sure why this is happening, but I think I'm seeing the same thing. Many times when I get an email on the iPad or iPhone with a picture attached, I don't see the picture but instead just a placeholder icon.
I have found a work around though to at least see the picture. If I forward it and include the attachment, I see the picture in the outgoing email. I can even save the image from the sending email if I really don't want to send it. If i do send it to myself, chances are I will see the picture in the email when I receive it even though it's just a resend of the original.
weird.

Problem loading apps in iCloud

When I log into iCloud on my PC (Window 7), I get an error message for each app (mail, contacts, calendar, etc) that there is a problem loading. What is the issue?

I don't know what browser you're using, but I would recommend downloading Firefox or Chrome. If you use a different Internet browser, the issue may be fixed.

TS3376 I was able to use the findmyiphone app last week, but now I have been getting an error message "Can't load findmyiphone. There was a problem loading the application." please help as we are trying to locate an ipod with pics of a no deceased loved

I was able to use the findmyiphone app last week, but now I have been getting an error message "Can't load findmyiphone. There was a problem loading the application." please help as we are trying to locate an ipod with pics of a no deceased loved one.

Had the same problem and the same message -- was suddenly unable to access icloud apps on my pc, also using Windows 7 and Internet Explorer. After several days of pulling my hair out, decided to try a different browser and was able to get in by using Firefox instead of Internet Explorer. Hope this helps.

Problems with syncing Ipad with ITunes: apps won't appear on Ipad and organizing icons won't save

I have a new Ipad 4 for three weeks. Yesterday I start having some problems with syncing my Ipad with ITunes (earlier all was without troubles):
- downloaded in ITunes on PC apps won't transfer to my Ipad - I press Apply and sync, it goes successfully, but apps won't appear on Ipad.
- I tried organizing icons on Ipad from PC, press Apply and sync, it all goes succesfully, but on Ipad icons won't rearrange. But ITunes shows that they are rearranged...
- also I tried syncing my books adding one new book, press sync all books, and new book won't appear. Only when I've chosen every book separately, they transfered.
I use USB for this.
I tried resetting my Ipad, reinstalling ITunes on PC, deauthorizing and authorizing my computer, but it didn't help.
Apple ID are the same on PC and Ipad.
I hope that I'm not the only one with this problem. And also forgive my mistakes if there are any - English is not my native language. Thank you!

I know that it is time consuming and a bit of a pain in the butt to have to do it, but I would backup the iPad, restore to factory settings and then restore from the backup, and sync everything back to the device. It's going to take a while because you have a ton of music on the iPad, but IMO, that would be your best option now.
You could try unsyncing all of the music, and then resync it all again, but that takes time as well. If you are going to spend that much time trying to fix it, you may as well restore the device ...IMO once again.
Use iTunes to restore your iOS device to factory settings

Problems load / sync apps

Similar Messages

Maybe you are looking for