Problems loading 0FIAR_C03 infoprovider

The load to ODS is ok, but when i tried to "Upload ODS data in data target" i got the error message: "Data source 80FIAR_O03 has to be replicated" to fix this error the help says: "Copy data source again and then activate the transfer rules..." I did it but the error persist. By the way replicate in the contextual menu of infosource is the same that copy source?
Regards

Thanks to all for early replies, but the error persist
The message is:
DataSource 80FIAR_O03 has to be replicated
DataSource 80FIAR_O03 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 23.08.2006 08:26:05.
The time stamp in the BW system is 21.08.2006 10:09:17.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
What i did as all of you mentioned:
Right-click in datasource 0FI_AR_4 and "Replicate Data Source"
SE38->RS_TRANSTRU_ACTIVATE_ALL selecting BPR in source system and 0FI_AR_4 in Infosource.
What i am missing
Regards and Thanks In Advance

Similar Messages

Load from Infoprovider with selection package error

Hello,
Requirement: Data transfer from one application to another application in BPC
Version: BPC 7.5 NW SP08
Source application: MGMT
Target Application: LEGAL
Transformation File: Yes
Conversation File: Yes for Location Dimension
Source records: 103 (The data is for only one Location)
When I run Load from Infoprovider with selection Package (/CPMB/LOAD_INFOPROV_UI package) i am able to load 99 records loading and 4 records are getting error.
Error Message: 121 ,41513000,,N,AVER,Y,2011,,1030,1030,,,0.0000000
Line 121 :Dimension:LOCATION member: convert failed in line 121; rejected
Analysis: Location conversion is already in place and other 99 records are able to success on the same conversion rule. I have checked transformation, Conversion files. When I validate the transformation file with data then also i am seeing same error.
Note: I am using same package to load data from BW Cube to MGMT application that time i am able to load without error, When I load the same data from MGMT to LEGAL then this error is coming.
I appreciate any clue on this error.
Thanks,
Sri
Edited by: sribpc on Oct 10, 2011 8:02 PM

We are able to solve the problem,
In the Account Dimension for one of the property we maintained some value with comma in it. That created a bad data and system throwing error.
After changing Account dimension attribute then the package is working fine.
Thanks for the support.

When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

Cannot directly open the browser from the icon. "problem loading webpage" and "timed out" are the messages. Access was accomplished by using yahoo messenger and opening my email. if I attempt to open a new page, I recieve the aforementioned warnings.

no link to open access to the internet. I used Yahoo Messenger, clicked on the 'mail icon' and since Firefox is my default it opened and I was able to continue from there. If I try to click File, open New Page, I get the "problem loading webpage" and "connection timed out" messages

changed my homepage to Yahoo. Now Firrefox works but still cannot access ANYTHING 'Google"!

I get problem loading page (error 404) it says the page cannot be found when i try to access the game Mobsters through my mysapce account and i cannot access it no longer through firefox and i want to find out why i cant, can you guys please help?

i cant access my mobsters account through myspace. every time i try to access it i get "problem loading page" "this page cannot be found" "404 error" and it wont let me access it. myspace works fine but as soon as i click on the mobsters app i get the 404 error, this page cannot be found, problem loading page! can you please help?
== This happened ==
Every time Firefox opened
== i try to access mobsters game through myspace

I dont understand the answer
'''''""The problem can be solved by opening FF and choosing Tools...Add On's...select the SEARCH addon and choose UNINSTALL...restart FF browser when asked, then reload Mobsters. This worked for me. The suggestion on the 404 that says to remove Search via Add/Remove Programs is completely BS, as Search doesnt show there. ""'''''

A lot of tabs loads and tells me there was a problem loading the page. How can I stop all the tabs loading because ist slows down Firefox.

When I open Firefox, a lot of tabs try to open at the same time. They all say Problem loading the page. It happened after I tried to download a owners manual for Harley Davidson motor cycles. How can I stop all but one tab from opening.

This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
See:
* http://kb.mozillazine.org/Session_Restore

Problem loading Query Designer Add-in

Hi All,
Can anyone please help me on my below issue.
Whenever user is trying to start a new query in Essbase , he is getting below error message. It will not allow user to build a fresh Essbase pull
Problem loading Query Designer Add-in. Workbook Activate,open & close operations may not be fully propogated
Thanks in advance.
Regards
Vishal

Hi Vishal,
1) Try to remove the addin and then add again.(Before doing this close all the excel process from the task Manager)
2) Check weather essexcln.xll and essxleqd.xla are corrupted.

Problem loading data into write optimized dso.....

Hi ,
I am having problem loading the data from PSA to write optimised DSO
I have changed the normal DSO into a Write Optimised DSO. I have 2 data sources to be loaded into the write optimized DSO. One for Demand and one for Inventory.
The loading of Demand data from PSA to DSO happens fine with out any error.
Now while loading the Inventory data from PSA to DSO , i get the below errors
"Data Structures were changed. Start Transaction before hand"
Execption CX_RS_FAILED Logged
I have tried reactivating the DSO, Transformation, DTP and tried to load the data again to the write optimised DSO, but no luck, I get the above error message always.
Can some one please suggest me what could be done to avoid the above error messages and load the data successfully.
Thanks in advance.

Hi,
Check the transformations is there any routines written.
Check your Data struture of cube and DS as well.
Is there any changes in structure.
Data will load upto PSA normally, if is there any changes in struture of DSO, then the error may occur.just check it.
Check the below blog:
/people/martin.mouilpadeti/blog/2007/08/24/sap-netweaver-70-bi-new-datastore-write-optimized-dso
Let us know status.........
Reg
Pra

TS3212 Is anyone else having problems loading the newest version of iTunes (10.6.3) on Windows?

Is anyone having problems loading the newest version of iTunes (10.6.3) using Windows Vista? My current iTunes program version 10.6.1 keeps telling me there is an update but when I try to load it the information box goes away and nothing happens. I have tried downloading the new version from Apple web site but it brings up a warning screen of " iTunes setup.exe is not commonly downloaded and could harm your computer." I select the action of run anyway and get the next error "iTunes Setup.exe is not a valid Win32 application." What Gives?

I select the action of run anyway and get the next error "iTunes Setup.exe is not a valid Win32 application."
In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

. I am new to IPods. I have a Classic 160GB and I can't figure out how to load my music videos to it. I have had no problem loading my music CD's but no go with the music videos I have. Please HELP. Thanks maxsdad

Hello:
I am new to IPods. I have a Classic 160GB and I can't figure out how to load Music Videos to iTunes or the IPod. I have had no problem loading my CD's to iTunes and to the IPod, but no go on the Music Videos.
Please Help
maxsdad

B-Rock:
Ok. Here's the results. I tried all the music videos I wanted to put onto the IPod and the results were:
I was able to get good results with 2 full length music videos and 2 video singles(only 2 videos on each disk). For a total of 4 videos.
I was able to encode 5 full length music videos, but the results were distorted (video and audio).
I was unable to copy 2 full length videos due to error failures. 1 was a "No Title Found" error, the other was a "NAVDAT" error.
I guess my next question is: Do you know of any other program(s) that I might try, to see if I can get good results with the videos that didn't work with Handbrake?
Thanks again for all your help.
maxsdad

"Problem with Trial - problem loading trial period for Adobe Photoshop CS3"

Hello,
I installed Photoshop CS3 Trial and whenever I run it and choose to begin my trial period I get the following error message:
"Problem with Trial - problem loading trial period for Adobe Photoshop CS3".
I tried uninstalling and reinstalling, and even ran the Adobe CS3Clean Script but nothing seems to help.
I should note I never installed any earlier version of Photoshop on my system (I use a fresh copy of Windows XP with only a few programs installed).
Any suggestions will be appreciated.
Thanks,
David

i had the trial of photoshop on and the trial has run out my friend has given me a disk with adobe photoshop on and i cant do it beacause of the regestry code the photoshop puts in after the trial has ended to tell my pc that i cant have photoshop on my computer again :(:( now i have herd that you can remove the codes but it is quite hard well iam willing for this challenge and if anyone could help me i would reall welcome your help or if anybody has got the link to a tutorial to tell me hoe to do it i would aprecitae that to thank you all very much and post bak soon please

Latest version of Firefox is having problems loading sites, it tries to load to Google Analytics. No error messages, just a page that won't load. How do I stop this?

Latest version of Firefox is having problems loading some sites, it tries to load and then gets taken over trying to load Google Analytics. No error messages, just a page that won't load. How do I get rid of this, it is a "pain in the neck"
== URL of affected sites ==
http://

I just spent 3 days with this issue as well. I finally fixed it by reluctantly adding yet another add-on called ADBLOCK
I was able to selectively block google-analytics. Now pages that weren't loading before are now loading.
eg vimeo.com starbucks.com & other random sites.
This was a tough one to fix because there is NO ERROR MESSAGE..page just shows it's loading...forever..& the bottom of my browser says 'waiting for google analytics'. I finally figured out google analytics is the culprit. Ironically, some help pages in trying to find a fix wouldn't load for me due to google analytics arghhh!
Im on a macbookpro & Safari worked fine for these same sites. It was just Firefox. I nearly switched back to Safari because of this stupid issue.
I'm wondering if this was caused by recent firefox 'updates'...

Cannot open grooveshark due to a supposed problem loading flash. (I have the latest version of both (Mozilla and Flash)

Everything with firefox works ok except Grooveshark. An error message appears saying: We had problems loading flash, you might have any blocker etc etc.
I don´t have any blocker and as a matter of fact i have the latest versions for both mozilla and flash. Neither version of flash test nor reinstallation process nor checking add ons or firewall settings solved my problem.
Thanks for the attention. Regards

To double-check your Flash permissions for the site, you can click the globe or padlock icon to the left of the address, click More Information, then click the Permissions tab. The "Activate Plugins" section would be the one to check.
I understand you have checked your add-ons, but in case there is an unexpected interaction, could you test the page in Firefox's Safe Mode just to confirm that extensions are not the problem? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
''Not all add-ons are disabled: Flash and other plugins still run''
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference?

Error message : Problem loading page, the connection was reset...

Problem loading page... the connection was reset.
Zwei IT-Experten haben sich das Problem angeschaut und haben aufgegeben.
FF haben wir mehrere Male deinstalliert und reinstalliert, Caches gesäubert, Cookies gelöscht. Mit Proxy, ohne Proxy, mit Kaspersky, ohne Kaspersky.
Diagnose: Irgendwo schlummert noch etwas vom alten FF, dass das Laden verhindert.
Chrome installiert, funktioniert einwandfrei. Speicherplatz, Win 7, alles OK. Verschiedene Internetverbindungen ausprobiert. Glasfaser, WLAN, nützt nichts.

Boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Get error message that skype has problem loading when computer is turned on the first time every day. this started when the latest firefox v6.0 was downloaded.

get error message that skype has problem loading when computer is turned on the first time every day. this started when the latest firefox v6.0 was downloaded.

''mbratlie [[#question-1055011|said]]''
<blockquote>
It was working fine and I had no problems, and then one day I tried opening a window and it froze. When I tried quiting the program my whole window went black. The x to the close the window doesn't work. The only option I have in my tool bar is Firefox and nothing happens when I try to quit firefox. Every time I try to shut down my computer Firefox prevents it. I haven't updated Firefox yet, so it's an older program, but only by a month or two. What's going on and how do I fix it?
</blockquote>
This is the first time it's ever happened. I downloaded the new operating system for Firefox but I can't install it until the Firefox currently running on my laptop quits, which it won't.

Problems loading 0FIAR_C03 infoprovider

Similar Messages

Maybe you are looking for