Problems Loading Adobe Premier Elements

I am trying to load Premier Elements and get a message that CS3 Bridge is open and should be closed in order to continue. CS2, CS3 and Cs 5 are loaded but none of these are open nor is the Bridge.

Sure it is "open". Terminate the process:
Working with your Operating System’s Tools
Mylenium

Similar Messages

Adobe premier element 9

Hello,
I have a problem with Adobe premier element 9.
I created a project with some photo and in this photo I put a little video to comment it. The project is in 1280*760.
My problem is when I want to record my project in a littler resolution (800*600), all the insert video moves out from the picture.
Do u know if there is an “option” to keep all as it was in 1280*760?
Other information: I tried to record my project in 1280*760, but it don’t work, “undefined error”…. This is an other problem…
Thanks for your help.

For what I am reading, per your desires, I would match the Project's Preset to that of your Video, in every respect.
Scale your still images to match the chosen Frame Size. This ARTICLE will give you tips and more detail.
Now, to get the Video to "come out of the stills," be sure to turn Scale to Frame Size OFF. Then, you will do a PiP (Picture in Picture), with the stills on Video Track 1, and the Video on Video Track 2, above the stills. You will then use the fixed Effect>Motion>Scale and Keyframe the Scale of the Video. You will start with a Scale of 0, so that the Video is not visible, then Keyframe the Scale to what you need, whether PiP (smaller than the stills), or full-frame. If you want the Video to "disappear" back into the still, just reverse the Keyframes.
When done, you can Export/Share to a smaller set of dimensions, with most formats/CODEC's. You will want to keep the Aspect Ratio the same, as with your Project's Preset, so a little math might be required.
If this is not what you want, please correct where I went wrong, and good luck,
Hunt

Hello, I just purchase Adobe Premier elements 12. I installed it but the only problem is when I try to open "new project" it tells me I have to put my password in and username for the first seven days of installation, but when I do that the project never

Hello, I just purchase Adobe Premier elements 12. I installed it but the only problem is when I try to open "new project" it tells me I have to put my password in and username for the first seven days of installation, but when I do that the project never opens, it just has the loading bar loading and then it stops, so I have no idea wat the problem is, please help

new project help
What computer operating system is your Premiere Elements running on?
Have you gone through the typical drills of
1. Latest version of QuickTime installed on your computer with Premiere Elements?
2. Running program from User Account with Administrative Privileges as well as from Run As Administrator applied to the desktop icon
with right click of the icon, followed by selecting Run As Administrator?
3. Does problem exist with and without the antivirus and firewall(s) disabled?
4. Even though the Premiere Elements 12 Editor will not open, can you open the Elements Organizer 12?
If Yes to all of the above, please review the following for a possible solution...
ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
Please review and consider the above and then we can decide what next which might include trying to open
the program directly from the .exe files. (If Windows 7, 8, or 8.1 64 bit, Local Disk C\Program Files\Adobe\
Adobe Premiere Elements 12\ and in the Adobe Premiere Elements 12 Folder are the Adobe Premiere Elements 12.exe
and Adobe Premiere Elements.exe files. Double click the Adobe Premiere Elements .exe file to try to open the project.)
We will watching for your results.
ATR

Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal

Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal Pre icon, File, Edit, Clip, etc.
I am planning on purchasing Premier Elements 13, would it be better if I bought a new program rather than download an upgrade, just in case the upgrade doesn't load properly due to the error with my existing program?
If I the deleted Premier Elements 9 on my PC would I lose all my existing videos that were produced using Premier Elements 9 or would they be saved so that they can still be worked on in Premier Elements 13?
Does Premier Elements 13 work with Windows 7?
Thanks
Terry

Premiere Elements 13 absolutely works with Windows 7!
In fact, I'd highly recommend you download the free trial and give it a test run.
Meantime, go to Windows Update and make sure you have all of the latest Windows updates, including those that don't install automatically. Then go to the nVidia or ATI site and ensure you have the latest driver for your graphics card, and go to Apple.com and ensure you have the latest version of Quicktime, per the program's requirements.

Adobe Premier Elements 9 setup problem

Hello.
I recently purchased a Dell Inspiron 15R special edition laptop, and was provided with a copy of Adobe Premier Elements 9. However, whenever I attempt to use PRE, it asks me to select my country/region.
Normally, this would not be an issue, but the country/region selector drop down menu is completely blank and does not change when I click on it.
Is there a way I could fix this problem?
Thank you.

Interesting - I had a similar issue with Elements 10. I was told by Adobe Support to:
Uninstall Elements 10.
Change the date on my Mac to 11/01/11.
Reinstall Elements 10.
It worked!

Adobe Premier Element 8 installation problem

We recently upgraded our computer from Windows Vista 32-bit to Windows 7 64-bit. In order to do this we had to reinstall the whole OS and we lost all of our applications. We have a license for Adobe Photoshop Elements 8 and Adobe Premiere Elements 8. We were successful at installing Adobe Photoshop Elements 8, but when we tried to install the Adobe Premiere Elements 8, it gave us the following error: "Either Adobe Premiere Elements 8.0 is not installed on the system or has corrupted. So please install Adobe Premier Elements 8.0 and then retry.". It appears as though the installer thinks it should be performing an upgade. Any ideas?

Could be a simple compatibility issue. not sure if PSE/PPE 8 is even qualified for Win 7. Try to run the installer in one of the compatibility modes.
Mylenium

Adobe premier elements 11 Downloading problem

I have perchased Adobe photoshop elements 11 ,and have instaled it easily. I couldn't download Adobe premier elements 11 though. Can anyone help Please? Thank you.

Double click the red and white icon on your desktop if you have the Adobe Download Assistant.
Select video from the products section then browse to find and download Premiere Elements. You will get the option to purchase or try free for 30 days.
Click to view

Adobe Premier Elements Video Editor will not open

I just installed version 12 of Adobe Premier Elements on my Windows 7 (64) system and am unable to open Video Editor. I receive a message that the display driver is not current and a newer version would make the program run more efficiently. After some time, the video editor stops trying to load. I have verified all windows updates are loaded and that I have the most current Quicktime version. I have also unloaded and reloaded Adobe Premier Elements but this issue continues to persist. Please assist.

blee3874
I suspect that this might be the immediate area to pursue
1. What is your video card's/chip's make and model?
AMD Radeon HD 8730M, Intel Graphics HD 4000
There have been discussions here about problems with Premiere Elements and a dual video card set up.
http://forums.adobe.com/message/5747654
What happens if you disable the Intel Graphics HD 4000 and just work with the AMD video card?
This is one of John T. Smith's and Hunt's favorite subjects. So we should be hearing from them soon. Meanwhile their presence can be felt in the link that I have referenced on this subject of dual video cards.
More later.
ATR

Problem with Adobe Premiere Elements 11

Hello
Need your advice .
Problem Description:
Adobe Premiere Elements 11 (BOX)
After adding any the timeline material ( pictures or music or video) , 2-3 seconds hanging.
Then closes without any notification.
This program gave me a friend, not for need. He used it to me.
By not knowing at first I installed a Pr, and then my friend temporarily deactivate the license .
In the "Help" menu is available only " Deactivate" ...
It is a problem with the activation or something else?
Hardware:
Operating system Windows XP 32bit sp3
3GB RAM
Processor Intel Q8300 ( 4 cores )
motherboard Asus P5P41TD
video card nVidia GT220 - Latest drivers
Direct X 9.0c
Software:
last QuickTime
microsoft visual c + + 2008 redistributable
microsoft visual c + + 2010 redistributable
net framework 4
net framework 3.5
net framework 3.5 language pack
k-lite codec pack full
Help please .

-What model of camcordder is your video coming from and what format and resolution is it?
I tried to add a video with the two devices.
Samsung HMX-H300
Video settings added to the project:
Video: MPEG4 Video (H264) 1280x720 50fps 12009kbps [V:
HMX-H300 [eng] (h264 main L4.1, yuv420p, 1280x720, 12009 kb / s)]
Audio: AAC 48000Hz stereo 127kbps [A:
HMX-H300 [eng] (aac, 48000 Hz, stereo, 127 kb / s)]
Used settings:
PAL-AVCHD-AVCHD LITE 720p50
The same thing happens and another video.
Sony DSC-H5
Video settings:
Video: MPEG1 Video 640x480 30fps 104857kbps [V: mpeg1video, yuv420p, 640x480, 104857 kb / s]
Audio: MPEG Audio 32000Hz mono 64kbps [A: mp2, 32000 Hz, mono, 64 kb / s]
Used settings:
DSLR-480p-DSLR 640x480p50
the same result.
-How did you get the video from this camcorder to your computer?
Files are copied to the flash card to the HDD.
-Have you ensured that a video clip from this camcorder is the first clip on your timeline so that the program can match its project settings to your video specs?
Yes. Video clip from this camcorder is the first clip in the timeline.
Parameters of the project and the video above.
-When your project settings match your video specs, you will NOT see a yellow orange line along the top of the timeline, above your video clips, in Expert mode. Is this the case with your project?
No. I suspect that the problem occurs in the video is displayed on the timeline.
Because the assets of the project and put the video thumbnail is displayed on this video.
at the time of the drop on the timeline displays only rectangular frame that meets the duration of the video itself. let go of the mouse button. Displays only the blue rectangle.
Thumbnails of the first and last frames do not appear. takes 2-3 seconds and Pr closed.
I believe that until you see the yellow line is not reached.
-Have you ensured that any photos you use are sized to no larger than 2000x1500 pixels in size?
Yes, size is not more than 2000x1500
- You're using a somewhat antiquated 32-bit operating system that can make limited use of your RAM load (which may explain why you only have 3 gigs of RAM), so you'll need to optimize your workflow by matching project settings to your video as closely as possible in order for the program to work effectively and stably.
yes, you're right. need to upgrade to 64bit. so I put 4GB of RAM, but I can not install 64bit Vindovs. no time. and available only 3.25 GB.
I would add, I hope it will help isolate the problem.
I've been tracking work in process monitor Pr. the very moment when it closes when you move the video on the timeline.
begins after the closing lines
Registry
RegOpenKey
HKLM\Software\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\ContentAnalysisData.dll
Before doing so, refer to
File System
C:\Documents and Settings\All Users\Application Data\Adobe\Premiere Elements\11.0\Online\DVD Templates\All_Lang\General\(A) Fun\it_IT_FUN_PAL_S_SM_OUTPUT_s_prv_sm.png
and the like ...
I turned drvatson. now the error appears as a window.
System disk, and on which stands Pr error checking. there are no errors.drive on which stands Pr error checking. There are no errors.

Sorry, a serious error has occurred that requires Adobe Premier Elements to shut down.

I have Adobe Premier Elements 7. When I launch the application then try to begin using it an error is presented which advises Sorry, a serious error has occurred that requires Adobe Premier Elements to shut down. We will attempt to save your current project. When I click OK the program shuts down. I have tried fixes I have found on the Forum. I have also uninstalled and reinstalled the program.

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•You MUST use an account with Administrator Privileges to run Premiere Elements
•(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.9.4"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•How many and what speed are your hard drive(s)... ie 5400rpm or 7200rpm or?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Install Adobe Premier Elements 9 results in Windows Installer window pop up

Installed Adobe Photoshop Elements 9 fine. When installing Adobe Premier Elements 9, the installation fails during 'Configuring Windows Installer' and a pop up window appears with the title 'Windows Installer'. What do I need to do to get this software installed?

You need at least 30GB (or better, 60GB) free defragmented space for PRE9 to work. Do you have this? You may have been on the borderline during install and your first project, so when you rendered your project, or restarted the machine, (possibly Windows creating a system restore point) your free space dropped below the limit.
Can you also confirm that you didn't install any new software between the saving and opening of your project.
Here are some general points you should work through to maximise your chances of success
Install all Windows Updates.
Install latest version of Apple QuickTime (v7.6.8 at time of writing). Even if you don't use QuickTime, PRE relies heavily on it.
Install most recent graphics and sound drivers from the manufacturers web sites.
Run Disk Cleanup.
Run Defragmenter.
Temporarily disable any anti-virus realtime scanning.
And give us some information about your clip and hardware:
Use the GSpot Codec Information Utility to analyse the file and post screen image.
What project preset did you use?
Where did the clip come from?
How did you get it into PRE?
Post back here with the necessary information described here: Got a Problem? How to Get Started

Adobe Premier Elements 10 has stopped working error message/Audio issues

I'm working on a project for about a week. I almost finished it, "shared" it to my computer, and watched it thru windows media player. I thought of something else that I could add to the audio, so I went back into the project in PE10 and put small (2-3 seconds) audio clips on audio track 3. Once I did that, PE 10 would not allow me to put any audio effects on that track. (I went into some older longer projects that I have and it allowed me to put effects on any audio track).
So, I moved my short audio clips to the Narration and Soundtrack tracks. It finally highlighted the App;y button for the audio effects. Now, the problem is that I can't play or click onthe timeline or move the timeline indicator without PE10 closing out of my video. As soon as I try to do anything, it says "Adobe Premier Elements 10 has stopped working" and it closes the program.
I can open my other projects and everything seems to work fine on those and it doesn't close out, but it won't allow me to do anything in this particular project.
Again, I have been going into and out of the project for a week and all of the sudden it won't let me work on it. It's only about a 3 minute project, so I don't know why it would have trouble.
Oh, and it also un-rendered everything.
Any thoughts?
Thanks!

LOTS more information is needed for someone to try and help
These questions below may be for a different product... but the information you need to supply is the same, for the products you use
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406

How to import AVI files created in Adobe Premier Elements 2?

I have captured video in Adobe Premier Elements 2 on my PC from my Canon Optura camcorder. I have a few hundred small .avi files that I need a friend to import into his Final Cut Pro so they can be edited along with other footage that he has created. What is the best way to do this? Should I output a different file type from Adobe to make it easier for him to import?
Thanks in advance.
Bob

David Bogie Chq-1 wrote:
Should I output a different file type from Adobe to make it easier for him to import?
<
No, it would be easier to give him the camera and let him capture natively.
bogiesan</div>
Unfortunately the clips are dispersed throughout many tapes so it is not reasonable for my friend to capture directly from the tapes.
I'm new to video editing and I don't know what format is recorded by my camcorder. Reading in this forum indicates that the .AVI files are just "wrappers". Is the compressor part of Final Cut? Would he be able to convert the files? Is it a problem if the time codes are lost. Can I do anything else in Adobe to make the conversion easier?
Sorry for all the dumb questions.

Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for

Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for assistance!

That's going to be a ridiculous waste of money and energy.
First of all, the current ATI drivers don't support multiple GPUs, so at the moment even a single 4870X2 would be only a 'normal' 4870 (which is quite a speed beast already). GFX drivers evolve rapidly, so things might look different next month, but when it comes to Linux and hardware there's one Golden Rule: stay away from the newest stuff and wait for proper support to get coded.
I also wonder what power supply could possibly cope with the differences between idle and full load; that's way beyond 400W. But then, I'm one of those "quiet&green" types where >100W idle is already a bit much.
I kind of understand that you want to get it done and not worry about hardware for the next 10 years or so, but that's simply not how the hardware world works and never did. At least not for the average consumer.

Im having difficulty downloading Adobe Premier Elements 13 to my PC

I am having difficulty installing my Adobe Premier Elements 13 to my Dell PC. I got though everything I thought but then it said it needed to extract files and put them to one of my files to complete the download. It acted ok, but then gave me the answer of, "Installer has detected that a machine restart may be pending....Its recommended that you quit thje installer and restart the machine and install again." I restarted the machine twice with no luck.

geowife
From where are you downloading Premiere Elements 13? And, are you downloading purchased files from Adobe direct or the Premiere Elements 13 tryout from Adobe direct?
What computer operating system is involved?
If you continue to have problems downloading and installing the program, try the download and install (with antivirus and firewall(s) disabled) from the following
web site and then insert your purchased serial number in it if you are dealing with purchased product.
Remember to read the Note: Very Important Instructions at that web site so that you do not get Access Denied message.
Also, after you go through the Very Important Instructions part and are eligible to click on the wanted file...
a. select the 2 files for your program and computer operating system
b. process File 1 (the .exe file) first - Adobe Application Manager before File 2 (the .7z file) - the program.
More details depending on the details specific to your situation.
Thanks.
ATR

Problems Loading Adobe Premier Elements

Similar Messages

Maybe you are looking for