Problems loading PDF files in Illustrator

Hi,
When I try loading a PDF file in Illustrator I get two errors. Firstly, it complains that the fonts are missing and will be substituted. This occurs even when the font is embedded in the PDF file, and even when the font is installed on the system. Is there something I need to do to make Illustrator recognise the font?
More seriously, an accented character (à, latin small letter a with grave accent) is mangled and shows up as a lone caret instead. Why is this?
In both cases the attached PDF file displays perfectly in Adobe Reader.
Any tips would be greatly appreciated!
Best regards,
Michael

I think you are misunderstanding something here/ not understanding how PDF text embedding works. If PDF files contain embedded fonts, those take precedence over local system fonts. Each font or sub-set of a font (if "only embed used glyphs" is chosen) is assigned a unique identifier number to reference it. Names are only stored based on how the file was created. It is up to the program opening the PDF file to read that info and make sense of it. This may allow to re-create an editable document, but as I already wrote, based on what priorities apply, it may not. The only way to make sure a document remains editable is to attach the source in a separate chunk, which is what Retain Illustrator Editing Capabilities does. The rest is far out and far inbetweeen, as they say...
Mylenium

Similar Messages

Problem when loading pdf files from Shared Content

When I load pdf files from Shared Content, I got the following problem: "The selected document could not be retrieved, please try uploading the document again."
Anyone knows this?
Thank you very much in advanced.

I don't migrated the program, but installed it from the original installer,
i. e. I first installed Indesign from backup, and then uninstalled it and
reinstall clean from Adobe.
What a plug-in or utility converts page from InDesign to PDF?
2014-08-10 22:51 GMT+04:00 Peter Spier <[email protected]>:
problem with exporting PDF files from InDesign CS5 created by Peter
Spier <https://forums.adobe.com/people/P+Spier> in InDesign - View the
full discussion <https://forums.adobe.com/message/6627440#6627440>

"Placing" linked PDF File in Illustrator for Markup Edits?

When I highlight text in a PDF file that is linked to an Illustrator file (PDF is "Placed" in the Illustrator file as a linked object), text highlights in the PDF file do not show up in Illustrator when I update the link. Does anybody know why, or is there some setting or workaround to force the PDF markups to show up in Illustrator?
Reason for Question
I often use Illustrator as a PDF editor because it is much more flexible than Acrobat's clunky editing tools. There are some significant problems however. If you open a PDF page in Illustrator, you lose some stuff like paragraph formatting, which Illustrator wants to left justify (same problem when opening an AutoCAD file in Illustrator). You can also have trouble with missing fonts like Helvetica, which isn't a default system font because it is licensed and expensive. Illustrator will swap the missing font out with a substitute so it can edit the text. (Acrobat will do the same thing if you try to edit a font that isn't loaded in your system).
A workaround to maintain exact registration if I just want to mark up a PDF file (rather than changing the text) is to "Place" the PDF file in Illustrator. When Placed, the file behaves like an object the isn't editable in Illustrator (you can edit a Placed object from Illustrator, but Illustrator will use the authoring application to do the edits, in this case, Acrobat). I you are interested doing the same thing,... when I use Illustrator to mark up another file like PSD, JPG or PDF, I initially open the file in Illustrator to capture the dimensions, and then delete everything, and then "Place" the file back into Illustrator. You can optionally link or embed the Placed object. After Placing, I use the transform tool to move the Placed Object's upper left corner to 0,0 (XY Coordinates) to acquire registration, lock the layer, and do my markups on separate layers.
This procedure is a bit clunky and requires multiple construction files but Illustrator's vector tools are much better than the most of the markup tools (but not all) in Photoshop or Acrobat. A Photoshop file will link to Illustrator, and you can export it back to Photoshop, but the Illustrator construction file will not be "linked" into Photoshop, so if you need to make changes with Illustrator you have a couple of options. You can open the Illustrator smart object from Photoshop (Photoshop will launch Illustrator to do the edits), or you can delete the smart object and work on the Illustrator construction file directly and re-import.
Since you can't select the text of a Placed PDF file object in Illustrator to highlight text, I'd like to do some of the text highlighting in the linked Acrobat file upstream of Illustrator. I should be able to bounce back and forth with both files open, the Illustrator construction file and the linked PDF file. Problem is that when I add a highlight to the PDF file, it does not show up in the Illustrator placed object that is linked to the PDF file.
So back to my original question. Does anybody know why PDF text highlights do not show up in Illustrator when the PDF file is placed as an object in Illustrator? Is there a workaround to force the PDF text highlights to display in Illustrator?
FYI, I working on a business presentation and need to mark up a few pages of IRS publication 463, which is a 58 page PDF document with a bunch of "destination" links (10 to 20 links per page). I can extract a page, do my markup edits, and then "replace" the page back into the original Acrobat file and all the links and bookmarks will still work, but registration is critical.
I'm using CS6
Thanks in advance for your insight.

Mylenium, Thank you for your on-point explanation of why the markups don't import into Illustrator. Based on your input, I did some digging and discovered:
I can export the Acrobat "Comments" (text highlights, but not markups?) to a FDF file
http://help.adobe.com/en_US/acrobat/pro/using/WS40A4853E-0D48-46a6-8AB6-6B9A27A22D83.html
and then optionally re-import them to another PDF, including a blank document (with the same dimensions to maintain registration) or the final output file. I can then open the PDF (that contains the comments only) using Photoshop and save as a PSD file. Photoshop captures the text highlight color graphic without the white background or text so I am able to achieve transparency. I can then "Place" the Photoshop file as an object on its own layer in the Illustrator construction file as either an embed object or a linked object, but I tend to link for a number of workflow reasons.
Quite clunky, but it seems to maintain exact registration (although for some reason, whenever I place an object in either Illustrator or Photoshop I need to move (transform) the object corner to 0,0 because it is typically off by a pixel or 2). Not sure if there is a way to also export PDF "Markups", but my objective was to use Acrobat's highlighting tools combined with Illustrator's vector graphic tools for markups, so even if I can only export the Acrobat text highlights and not the "Markups", I can still achieve my objective.
From a work flow perspective, I may optionally choose to use the text highlights only as a reference in the Illustrator construction file and turn them off when saving back to PDF. I would then import the text highlights (FDF file) into the final PDF so they are actual Acrobat highlights rather than raster objects, but I do have the option.
I have also noted that I can print an Acrobat file to PDF to capture the text highlights, but that method introduces problems with registration and transparency (the white paper background). I'll often print my final output to PDF rather than saving to achieve a small flat file that will render consistently on different computers, but in this case registration is important so it is better to save to PDF and live with the larger files size.
Why all the fuss? Acrobat is good at highlighting text and Illustrator is good at drawing stuff like curvy paths with variable strokes. Illustrator also has layers and stacking order control. (Acrobat has clunky wannabe layers that are good for limited stuff like multiple versions, but not much help with graphic composition or stacking order). I need workflows that can merge tools from multiple programs (Acrobat, Photoshop, Illustrator, Autocad, and Solidworks). I could do my vector markups in Illustrator, then save to PDF and do the highlights in the final Acrobat file, but if I need to change the vector graphics later I would lose the highlights. Doing the highlights in a separate PDF file and then exporting to a FDF file lets me make changes in Illustrator without having to recreate the highlights from scratch.
Thank you for your assistance. If you have any additional suggestions I am always striving to improve my workflows. btw, I've experimented with some of the 3rd party PDF editor's, but not the expensive ones (less than a few hundred dollars). Most of them do a few things better than Acrobat, but they all have their shortcomings and I'm leery of investing my time in applications that might be obsolete in few years. Perhaps this discussion is better suited to the Acrobat Forum, but I do a lot of PDF editing with Illustrator despite its limitations.

Intermittent Bug when saving pdf files in Illustrator CS6

I save a pdf file in Illustrator CS6 with a specific art board size. When I open it in Acrobat the size is off. When our print's RIP's the file, it is off the same amount. I will re-open it in Illustrator and re-save it and just change the name, the artboard is then correct. This is very intermittent. It has happened on two copies of CS6. Both prograns are current with the updates. I am on a iMac running OS 10.6.8.

Document size is: 36.01 x 98.12
I can open up both documents in Illustrator and they are identical.
We have been using these presets for a couple of years without issue. The problem started happening about 3 weeks ago on 2 seperate computers. We have not seen the problem with CS5.5 and earlier.
Below are the preset settings summary:
Warnings
Adobe PDF Preset: CCC High Res PDF
Compatibility: Acrobat 6 (PDF 1.5)
Standard: None
Description
          [Based on 'CCC High Res PDF'] [Based on 'CCC High Res PDF
          04-28-08'] PDF Workflow For Custom Color Corporation Output
General
          Preserve Illustrator Editing Capabilities: On
          Embed Page Thumbnails: On
          View PDF File after Saving: Off
          Optimize for Fast Web View: Off
          Create Acrobat Layers from Top-Level Layers: Off
Compression
          Color Bitmap Images:
                    No Sampling Change
                    Compression: None
          Grayscale Bitmap Images:
                    No Sampling Change
                    Compression: None
          Monochrome Bitmap Images:
                    No Sampling Change
                    Compression: None
          Compress Text and Line Art: Off
Marks and Bleeds
          Trim Marks: Off
          Registration Marks: Off
          Color Bars: Off
          Page Information: Off
          Printer Mark Type: Roman
          Trim Mark Weight: 0.25 pt
          Offset from Artboard: 0.083 in
          Use Document Bleed: On
Output
          Color:
                    Color Conversion: No Conversion
                    Profile Inclusion Policy: Include Tagged Source Profiles
Advanced
          Subset embedded fonts below: 100 %
Security
          Document Open Password: Off
          Permissions Password: Off
          Encryption Level: High (128-bit RC4) - Acrobat 5 and later
on: Off
          Printer Mark Type: Roman
          Trim Mark Weight: 0.25 pt
          Offset from Artboard: 0.083 in
          Bleed Left: 0 in
          Bleed Right: 0 in
          Bleed Top: 0 in
          Bleed Bottom: 0 in
Output
          Color:
                    Color Conversion: No Conversion
                    Profile Inclusion Policy: Include Tagged Source Profiles
Advanced
          Subset embedded fonts below: 100 %
Security
          Document Open Password: Off
          Permissions Password: Off
          Encryption Level: High (128-bit RC4) - Acrobat 5 and later

How to Enable Plugin before File Opened And Load PDF File From memory?

hello everyone,
there have two problems,all i want to do is to show a pdf file encrypted by AES algorithm.
1.one is how to enable plugin before file opened?
i developed another two plugin,and each enabled after one pdf file was opened,and now i want to replace the file open command and can do some word by meself,such as decrypt the pdf ?
2.another is how to load pdf file from memory?
if i can enable plugin before file opened,and than i can read the file and decrypt it,and now i want to do is do load the decrypt file (in memory) into the adobe?
i tried many method,but all in vain.who can help me or give me some advice?
thanks.
merry chrismas to everyone.

The proper way to handle other file formats (even where it is really a PDF that has been "wrapped") is to create an AVConversionHandler.
To load a PDF from a source other than the file system, you need to create a custom AVFileSys.

Reader will not load pdf files

my adobe reader will not load pdf files. I tried un-installing and re-downloading the reader. same thing it won't work. It works on my other computer

The operating system is Windows 7. I get error message "there is no email program to perform the requested action". I get same error for local C: drive, jump drive, online firefox or microsoft browser. same problem.
I fixed the problem by un-installing adobe xi and re-downloading adobe x. Its working great. adobe xi may work OK on windows 8. I have a laptop with Windows 8. I will be trying that tomorrow. I will send you a message.
Lightman6770

TS1702 iBooks won't load PDF files any more on my Ipad2. Anybody seen this one before?

Hello All,
iBooks won't load PDF files any more.
I have a lot of PDF files so I thought I reached a maximum number of files or space so I deleted a lot of old files but this did not help.
I rebooted, synced, updated, restarted, etc. - everything that I can think of and I still have the same problem.
I don't remembered the last file that I loaded into iBooks, as I usually put them into collections.
I can still load PDF files into other applications like PDF Reader, but I prefer to have them all in iBooks.
Anybody seen this one before?
I have 64GB iPad2 and I have over 14GB free space.

There have been several threads on this topic over the last few weeks. It's not clear what the issue is, and it is not universal, but tend to effect users storing large numbers of PDFs in iBooks. Possible it has some thing to dowith capacity of the app, or specific characteristics of some of the PDFs.
You might have a look at the "More Like This" list to the left of this page.

Recently my adobe is taking much longer to load PDF files that used to open immediately

recently my adobe is taking much longer to load PDF files that used to load almost instantly

Look at this comprehensive trouble shooting document;
https://discussions.apple.com/docs/DOC-3353
I suggest that you start with SMC and PRAM resets.
Then a Safe Boot.
Ciao.

Editing a PDF file on Illustrator to maintain custom font from another computer

Hello,
I am trying to edit a PDF file on Adobe Illustrator and the file has a custom font in it that I do not have saved on my computer/Adobe does not recognize. Is there a way to save the file so that I can edit it, but so that Adobe does not replace the font with a basic font?
I have tried:
-Opening it in AcrobatPro vs. Illustrator
-Saving the PDF (2 pages) as 2 separate JPEG files and placing them into Illustrator... That just lowers the resolution of the images and they are much lower quality/more pixelated
-Placing the PDF file in Illustrator rather than opening it in Illustrator
None of those worked, and now I am not sure what to do.
Please advice ASAP- Your help is much appreciated as I am on a time crunch!
Thank you!

You can do it with Acrobat. Not Acrobat reader.
It is also possible with Preview.
Open the file in Preview and export it say to the Desktop.
Than open the second pdf and import the file.
Than you can delete tha parts you so not need and leave only one page.
It can be used if the pages are not too many or it will take a long time and I am not sure if it will work with big files.

Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before down

Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before downloading the new Reader version. Suggestions? Thank you.

Hi,
Which version of Adobe Reader were you using earlier when printing using Dell printed was working fine?
Thanks,
Shakti K

How to load PDF files into oracle database and display them in APEX

Hi All,
We have a requirement for loading the Loading PDF files (lots of PDf files) to the oracle database and then display the PDF files in the Oracel APEX report.
So that User can view the PDF files. Our current APEX verison is 3.2..
Please let me know how to implement it and where to find the sample application!
Thanks in advanced!
Jane

Thanks Tony for your quick response!
We need to load a lot of PDfs (history + current).
I have a questions about the SQL loader. I am trying to insert a pdf file into a table by following the oracle loading sample:
http://download.oracle.com/docs/cd/B10501_01/text.920/a96518/aload.htm
Example Data File: loader2.dat
This file contains the data to be loaded into each row of the table, articles_formatted.
Each line contains a comma separated list of the fields to be loaded in articles_formatted. The last field of every line names the file to be loaded in to the text column:
Ben Kanobi, plaintext,Kawasaki news article,../sample_docs/kawasaki.txt,
But i don't know to where should I put my pdf file on the server.
for example:
,../sample_docs/kawasaki.txt,
Where is the file 'kawasaki.txt'??
I try my local path, it didn't work. like c:\temp.
then I loaded teh PDf file into our server(/findev20/olmtest/orafin/11.5.7/olmtestcomn/temp) , and In my data file. I put the path
1, pdf_emp1,../findev20/olmtest/orafin/11.5.7/olmtestcomn/temp
but I got the error: the system can not find the file specified.
Where should I put the PDf files on the server and how to specify the path in the data file?
Thanks!
Jane

I can't edit multi page PDF file in Illustrator at once.

I made 30-page PDF file in Illustrator last week.
Yesterday my co-woker eited and sent to me.
but i can't open 30-pages all in once
instead of this window pops up and only 1 page of all open it.
How do I open all the page and edit it once without any script?
Last week I Could open it without asking.

Keep a backup of the .ai file. Your coworker should not be making edits to pdfs, only commenting tools. Tell your coworker not to do that again, unless they know what they are doing (eg: are creating from scripts). If they persist, or this is your boss, lock the PDF with security protection.
This script may help you. Keep in mind the popular pdf preset smallest file size converts to RGB, so your color will change and l;ayers possibly flattentin if Illustrator editing capabilites is lost.
https://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1698047

I am having a problem where pdf files on the web (i.e., links in a Word doc) open after an extended time and only as gobbldygook ( a file containing a series of characters and letters that make no sense). This also happens for another Mac user coworker

Hi There: I am having a problem where pdf files on the web (i.e., links in a Word doc) open after an extended time and only as gobbldygook ( a file containing a series of characters and letters that make no sense). This also happens for another Mac user coworker in my office, while the PCs don't have this problem... Any help/suggestions for a fix would be most appreciated!

Just adding more info - MacBookPro running 10.5.8 and using Safari as the browser. The problem comes and goes - sometimes the linked Word files will open OK, n others its just a strring of crazy characters...

Open a PDF file in illustrator with multiple pages CS6

Hi all,
Maybe someone could tell me if this feature is already available...
I really need to use this feature... maybe someone has a Idea? i need to translate and edit a PDF file that was original designed by our factory... they had hired a company to make the documentation but the company did go bankrupt so we can't get the original files en need the edit the compressed PDF File...
I Hope someone could help me...
Greetz
Leroy

hi,
16 PDF Files with 4 pages Each..
don’t know what kind of text it is…
about image quality… if there is a method to editing of the PDF .. then I could Replace the Images …
Van: Monika Gause [email protected]
Verzonden: woensdag 22 augustus 2012 13:31
Aan: AcidusW01
Onderwerp: Open a PDF file in illustrator with multiple pages CS6
Re: Open a PDF file in illustrator with multiple pages CS6
created by Monika Gause <http://forums.adobe.com/people/Monika+Gause> in Illustrator - View the full discussion <http://forums.adobe.com/message/4639138#4639138

Loading pdf file in flex application (not in AIR)

Hi,
Could any one suggest opening pdf file within flex application with blazeds.
we have used the following code to open pdf file in the same window
navigateToURL( new URLRequest( "http://localhost:8080/PdfSample/jsp/PdfContent.jsp" ),"_self");
But we want to load the pdf file in a vbox.Similary to the below image
Is it is possible to load pdf file in flex application,if so how can we achieve it

Hello Mariush,
I have to display the content of the PDF in the flex application. If not PDF directly, is there other workaround for this. Or can I display the content of the MS word file, if not PDF.
Thanks and Regards
Khalid Chaudhary

Problems loading PDF files in Illustrator

Similar Messages

Maybe you are looking for