Problems Logging In After Upgrading CSS/R&R

I'm having problems logging in on my Thinkpad Z61t. I recently upgraded from Client Security Solutions 7.0 to 8.0--in doing so, I had to install Rescue & Recovery 4.2, uninstall CSS 7.0, and then install CSS 8.0. Now, however, when I power up my computer, it locks up on the logging-in screen. Basically, where I need to swipe my finger, it won't read anything--it just locks up. This doesn't happen every time--I can power off my computer and restart, and then it works. But this still happens every day. Does anyone know how to fix this? Thanks!

Thank you for everyone who responded to my post, and I apologize for the long delay in replying. We were forced to rollback to RH7 due to deadlines, and have just now been given the green light to troubleshoot the RH8 problems further.
Amber: your suggestion of adding the font family/size to the ol tag solved my problem of the numbers appearing larger than they should. Thank you!
As for my issue regarding bullets appearing "hollow", adding "list-style-type: disc;" to my ul tag (as suggested by Willam in this thread http://forums.adobe.com/message/2166981#2166981), solved that issue. Thank you.
I have one remaining problem and that is my alpha lists. They are appearing as numbers when I preview or after compiling. I see Willam's comments in the mentioned thread of removing the list-style definition from the paragraph style and adding "list-style-type: decimal" to the ol tag. This would work if only I didn't have both numbered steps (1,2,3) and alpha steps (a,b,c). So my question is, how can I get my alpha steps to appear alphabetically instead of numerically? I'm not sure if this further complicates the situation, but I typically use the alhpa style within my numbered lists, so:
1) Text...
a)
This is what I have in my CSS for my alpha style:
P.NumberedStepABC {
color: #000000;
font-size: 10pt;
list-style-type: lower-alpha;
LI.P-NumberedStepABC {
color: #000000;
font-size: 10pt;
list-style-type: lower-alpha;
And my ol definition is:
OL {
margin-top: 0px;
margin-bottom: 0px;
font-size: 10pt;
font-family: Verdana, sans-serif;
Hopefully this makes sense. I am not a CSS expert and appreciate any suggestions.
Thanks

Similar Messages

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

It would always be easier to fix the Mail problems.

My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what c

My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what can i do!???? Thanks a lot for help me!!!!

I have a nearly identical problem with my Ipad 3. Mine is the left channel. I've yet to find help, but have found a number of other posts on this and other forums discussing the issue. People have tried restore, reset etc. Also, cleaning the ports with compressed air or cotton swabs. It appears to be a software issue, but no one is sure.
Along with the original poster, I'd appreciate any help.
As far as the 'level 6' poster, if you're going to be rude, please don't bother. Hope it was just a bad day.

Problem extending VO after upgrade to JDev RUP6

We are having problems extending VO after upgrading from JDev CU2 to JDev CU6. The extended VORowImpl java file extends the OAViewRowImpl instead of the VO that we are extending. Other files are fine except for the VORowImpl
Is there any JDev setting we need to set for CU6?
Any help/insight is appreciated.
Thanks,
Ramesh

Hi,
R u mean to say ur extended VO's changed automatically,or ur having problem extending the new VO's.
Thanks

[SOLVED] Problem with murmur after upgrading to 1.2.3-4

I've been running Murmur on my server for a long time without problems. The last version I had running was 1.2.3-3. After upgrading to 1.2.3-4, the already-running murmurd process crashed after a while (some hours after the upgrade, after constant use) and I'm unable to restart it. The message I get is:
:: Starting murmur [BUSY]
<W>2012-01-07 22:06:11.133 Initializing settings from /etc/murmur.ini (basepath /etc)
<W>2012-01-07 22:06:11.134 OpenSSL: OpenSSL 1.0.0f 4 Jan 2012
<W>2012-01-07 22:06:11.134 SSL: Adding recommended CA StartCom Certification Authority
<W>2012-01-07 22:06:11.134 SSL: Adding recommended CA AAA Certificate Services
<W>2012-01-07 22:06:11.135 SSL: Adding recommended CA UTN-USERFirst-Client Authentication and Email
<C>2012-01-07 22:06:11.135 Successfully switched to uid 1007
<F>2012-01-07 22:06:11.230 ServerDB: Failed initialization: unable to open database file Error opening database
[DONE]
and in murmur.log nothing gets written. Downgrading to 1.2.3-3 works, but I thought I'd look for the cause of the problem.
After poking around a bit, I noticed that my murmur database (/var/lib/murmur/murmur.sqlite) belongs to a nonexistent user with a UID of 86 and a GID of 86, as well as the whole /var/log/murmur/ directory. I also noticed that a new murmur user and group with UID and GID of 1007 and 1000 exists on the system now. It seems that running:
sudo chown -R murmur:murmur /var/lib/murmur/ /var/log/murmur/
fixes the problem. Perhaps the update deleted my pre-existing murmur user and group and recreated them?
Edit: Guess I should mark this as [SOLVED].
Edit edit:
Also turns out the whole /var/lib/murmur/ directory has to belong to murmur, not just the sqlite file.
Last edited by n17ikh (2012-01-08 03:22:39)

I had the same problem and fixed it like you.

Problems with updates after upgrading to CS4

I am experiencing update problems after upgrading from CS3 to CS4.
After completing the upgrade, I opened CS4 and then clicked on 'Help' and 'Updates'. The download was 280MB of updates, which duly started to install. However, during the install process, I received the 'installation incomplete' pop-up box and could only continue by clicking on the ‘Cancel the current update and continue installing…….’ option. At the end, I shut the machine down.
This morning I have run the CS4 updates again, this time downloading 80MB (I guess the bits that it didn’t do last night). When installing, the same 'installation incomplete' popped up three times.
Any help would be much appreciated.
Many thanks

OS?
Are you seeing which componenets are not successful? If no message in the progress window about what is being installed, there is probably a log.
Have you tried going to the website to download the update installer?

Problems with Mail after upgrading to 10.9.1

I am running into problems with Mail after installing 10.9.1. I had NO problems with Mail prior to this update.
Problems I have encountered so far are:
- I don't receive some e-mails on my Gmail account.
- I have sent e-mails that supposedly got "sent" but do not show up in my Sent box both on mail and on web Gmail. My Outbox is empty also.
Has anyone encountered the same problems and found a solution?
Thanks in advance!

Yes Paul I have, but no solution. I cannot send email. My ISP uses a smtp mail server for sending and It will not log in. Have had ISP on phone and checked all settings. Can only put it down to Mavericks.
It worked OK for a week after upgrading then stopped. So now having to use web mail to send email.
Strange thing is I receive mail OK, just cant send.

Problems with passwords after upgrade to Mavericks

Hi,
After upgrading to Mavericks I have problems with passwords. MacOS allows me to log in with my password but when I want to install software it does not accept my password. I can go to the user tab in system preferences and change my passwort there. With the new password it works, but when I change to the old password, I have the same problems. Strange ...
Thanks for help

OK. I found the problem (probably it is not related to the upgrade): When I install an application and the installation procedure asked me for a password it switched the keybord driver to a language I only use infrequently. Since my original password contained special characters the change of the keyboard driver was the cause for my typing in a wrong password. When I tried changing the password I used "abc" and this worked since it did not contain any special characters. So everything explained and a bug for Apple to fix.

Can't log in after upgrading to mavericks

After upgrading to Mavericks, I at first seemed to lose the 2nd HD (all data), then list the ability to log in
Help!

If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

Problems with Hotspot after upgrading to OS 10.3.1.1565

SInce i have upgraded the OS to the lastest version on my Q10, the Hotspot has stopped working. Previously it was was working absolutely perfectly. I have checked other support forums and a lot of users are facing the same problem after upgrading to OS10.3.
I would like to know how soon a patch to fix this problem will be made available by Blackberyy.

Known issue. No ETA on a resolution yet, unfortunately.
http://www.blackberry.com/btsc/KB36801
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Call log issue after upgrading to OS 10.3.1.1581 from 10.2

Dear all.
I have update my BlackBerry 10 os to 10.3.1.1581 and to my surprise i find that the call log os restricted to about 150-200 call whereas it was almost unlimited in the previous 10.2 os .
BlackBerry should issue a fix asap since this is such a basic features and necessity.
I find myself in a very bad situation after upgrading.

I have two call lors. One in the phone app, and one in the hub.
I feel like the one in the phone app is quite short, but the one in the hub is unlimited.
Do you confirm on your side?
That being said, tracking more than 150 previous calls regularly is an extreme usage of the phone, I don't think the OS is made for that. I suggest you use a third party app that will be suited at tracking 200 phone calls a day.
There are several that are free currently in BlackBerry World (the Free March section).
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Wifi problem of G560 after upgrading to windows 8.1

Hi,
I have a lenovo G560. After upgrading from windows 8 to windows 8.1, I cannot connect to wifi. I was wondering if someon else has the same problem.

hi amardoukhi,
Welcome to the Forums.
Your issue might be similar to this thread. Try the solution that was posted to rollback to an older driver version.
The solution was to:
1. Open Device Manager (press WInkey+R > type devmgmt.msc)
2. On the Device Manager, navigate to Network Adapters > right click on the wireless adapter and choose Update Driver Software
   - Link to picture
3. On the Driver Update Window, choose Browse my computer for driver software > Let me pick from a list of device drivers on my computer and choose the wireless card on the list.
   - Link to picture
   - Link to picture
   - Link to picture
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

PDF problem in Preview after upgrading to Yosemite in MacBook Pro Late 2011

After upgrading to Yosemite , i have a problem viewing PDF's.
When opening high resolution PDF's e.g. 2588 x 3368, it will display distorted image or distorted characters.
and scrolling normal resolution PDF is very slow.
Can anyone help me with this?
Thank you very much!

Sounds like Notifications app.
Maybe some other app. In SystemPreferences->Users&Groups->LoginItems tab: remove all entries with the minus sign underneath. This will not uninstall anything, you have to start those apps by hand now. Restart.
Still there?
Yes: Restart again while holding the shift key, this will start the mac in SafeMode: only the necessary items are loaded to run.
Still there?
Yes: Make an etrecheck list and post it here.
No: Restart, put the items in the LoginItems back, one by one, restart after each entry, and you will find the "culprit"
Please report accordingly. I will be back in 24 hours.

Wifi problem with Mac after upgrade to Mavericks

I just upgraded to Mavericks but something wrong with my wifi.
i can get internet through LAN link from Airport but not through wifi even i can receive an IP address
i tried connect to hotspot with my iphone5s and it works.
Other devices can use wifi just fine through Airport, just not my Mac using Mavericks
In conclusion,
Airport should be fine because my other devices works.
Mac wifi should be fine too because i can connect using hotspot.
so why it's not working when i connect Mac to Airport?

I was having problems connecting to Wifi with my Macbook Pro (!2010), after upgrading to Mavericks. I was on the phone repeateadly with AT&T because I have Uverse. Testing everything (channels, signal strength) and had techs come out to check the line, ports, switches, etc. When I hardwired the Mac into the Uverse router, it worked fine. This rulled out any problems with the line in.
I considered getting a repeater but then I read that repeaters are not really good and it is better to reconfigure a router to act as an access point on the network. Plunked down about $80 for a Belkin AC750 router at Best Buy. In the setup it has an option to set it up as an access point only. Clicked that, connected it to my Motorola NVG510 Uverse modem and then connected to the Belkin router from my Mac. Voila! It's been a solid 11+ Mbs ever since (my plan maxes at 12Mbs). Connection is still solid and life if good even though it ***** to plunk down another $80 for a second router. But it was worth it just to get rid of the headaches.
I think the wifi capabilities of the Motorola NVG510 modem are the cause of a lot of problems with AT&T Uverse issues, particularly for Mac owners. I think it was also causing my Airport Expresses to drop occasionally.... Few minutes of music then drop... music drop.... All gone now.
I don't know if you are on Uverse but if so, I highly recommend configuring a second router as an acces point (it can be any old router you still might have - the setup is just a bit trickier because you have to do it manually).
Good luck.

Problem with setMnemonic after upgrading to 1.4.2

Hi,
setMnemonic doesnt seem to work properly for JButtons after upgrading from 1.3.1 to 1.4.1. Hot Key works but underlining doesnt show.
In our app, we have our own controls which are basically derived from Swing controls. In this case JButton.
I have tried using both setMnemonic API (char as well as int) but no luck. Look and feel we use is Windows look and feel (W2K). Font is Dialog. One thing I have noticed is that if I donot set the look and feel in my app. It seems to work fine. (Metalic).
Anybody has any clue on how to fix this issue ?
Thanks in advance
Sohan

Hi,
Here is a code sample for the above problem.
import java.awt.*;
import javax.swing.*;
public class TestFrame {
          public static void main(String[] args) {
                    JButton button = new JButton();
                    JFrame frame = new JFrame();
                    // Add button to the frame
                    //frame.getContentPane().setLayout(new GridBagLayout());
                    //frame.getContentPane().add(button, new GridBagConstraints(3,2,1,1,1.0,1.0,GridBagConstraints.SOUTHEAST,GridBagConstraints.NONE,new Insets (0,0,0,0),0,0));
                    frame.getContentPane().add(button, BorderLayout.NORTH);
                    // Set initial size
                    int frameWidth = 300;
                    int frameHeight = 300;
                    frame.setSize(frameWidth, frameHeight);
                    button.setText ("Button");
                    button.setMnemonic((int)'o' );
                    button.setMargin(new Insets (0,0,0,0));
                    button.setSize (new Dimension (73,21));
                    button.setFont(new Font ("Dialog", Font.PLAIN, 11));
               try {
                    UIManager.setLookAndFeel ("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
                    SwingUtilities.updateComponentTreeUI(frame);
               catch (Exception e){};
                    // Show the frame
                    frame.pack();
                    frame.setVisible(true);
Sohan

Problems Logging In After Upgrading CSS/R&R

Similar Messages

Maybe you are looking for