Problems logging in even after changing the port

I first had the problem logging in when I got my mac, and changed the port number and all was fine.
Just recently, after some unrelated issues with our router, I started having more problems. Things were working up until yesterday.
I will try to log in to iChat using the 443 port number, and it tells me " An undefined AIM socket error occured", then switches to the original port number, logs me in and out repeatedly, and says I have tried to log in too many times, etc. It won't keep the 443 number set for logging in either.
Help!

Hi,
Try these two things one after the other. (i.e. use the second if th first does not work)
1) Go to you home Folder/Library/Preferences by manually clicking through them
Delete com.apple.iChat.AIM.plist and then restart iChat.
Restarting iChat recreates the .plist and forces it to re-establish the Login info.
If successful change the port to 443.
2) GO to the iChat Menu > Preferences > Accounts and highlight the miscreant
Use the Minus button and delete it.
Re-add the Account/screen name using the Plus Button.
9:50 PM Friday; April 3, 2009

Similar Messages

  • My canon sx120IS continues to show low batter and shuts off even after changing the batteries.

    My canon sx120 is  continues to show low battery and shuts off even after changing the batteries.  Any suggestions? Do I need to send it for repair somewhere, and if so, where?

    Hi LB!
    Thank you for posting on our forum!
    Try cleaning the electrical contacts on the camera and the batteries using a soft microfiber cleaning cloth.  If the same warning still displays, then the camera will need to be serviced.  To start the repair process, you'll need to complete a Repair Request on our website.
    If the camera is more than a year old, you may participate in the Canon Loyalty Program instead.  The Canon Loyalty Program option allows you to replace your current camera for a discounted fee, plus shipping.  The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided.  
    If you would like to take part in this option, please call our Sales Department at (800) OK CANON (800-652-2666) seven days a week, 8am to Midnight.  Let them know you have been working with online support and the Canon Loyalty Program was offered.  Be sure to have your serial number for your camera at the time of your call.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • My vi is writing just the same data into spreadsheet even after changing the loop iteration time. hw can I change this mode ?

    My VI is writing the same amount of data into spreadsheet file even after changing the for-loop iteration time

    You should post the VI (with appropriate values saved as default) to this thread.  (At least a JPEG or PNG screenshot).
    Inside the For Loop, right-click on the N terminal and create Indicator.  Run the VI and you will see how many times the Loop spins.
    Further guessing:  You may have a 2D array with two rows and many columns feeding the For Loop.

  • HT3176 my apple remote will not link to my appletv even after changing the battery

    my apple remote will not link to my appletv even after changing the battery.  can anyone help?

    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

  • While i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

    while i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

    Hi there aliyan,
    I would recommend taking a look at the troubleshooting steps for "No SIM" found in the article below. 
    If you see 'No SIM' alert on iPhone
    -Griff W.

  • Can't log in (Mac OSx 10.6.6) even after changing the password 8 times!

    Not happy.I can't believe how hard it is to get support from Spotify for a service I am paying them for! Having to trawl through chat rooms is not customer care! Basically, I can't log into Spotify even after changing my password. I am at work but the tech bods say it should work fine (always has done until now). I just need someone to let me into the service I am paying for!If anyone see's anyone from Spotify hiding anywhere, please let me know.  

    If I follow that link you just sent me and use my email address for the username (I don't have/ can't remember my username) and put my password in it doesn't work. If I use my email and password to log in (using the link sent to my email to reset my password) it logs in fine. It doesn't recognise password on the Spotify App

  • OEM Can't get to database after changing the port on the database

    Hello OEM Gurus!
    I had to change the port on a database(11g) from 1521 to 1526. I adjusted the listeners to include the SID (finapp1t) in the listener listening on port 1526. I removed the SID from OEM (10g btw) and rediscovered it. It successfully rediscovered.
    Now I receive the following when I attempt to go into "tablespaces" or "tables" on the FINAPP1T database page:
    Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: (description=(address=(host=urora2t.unioncentral.com)(protocol=tcp)(port=1521))(connect_data=(sid=finapp1t)(server=dedicated)))
    I then clean started the Agent on the server but I get the same results.
    OEM seems to think that that database FINAPP1T is still using port 1521. I can connect to the database on port 1526 from my Desktop so I know the listener sees this database.
    How do I tell OEM to update the port ?
    Thanks for you help!
    Edited by: sawright on Mar 29, 2012 10:33 AM

    Success
    The connection test was successful.
    =============
    Information from Review Screen:
    Name Value
    Oracle home path /u01/app/oracle/product/11.2.0/dbhome_1
    Monitor Username dbsnmp
    Monitor Password ******
    Role NORMAL
    Listener Machine Name urora2t.unioncentral.com
    Port 1526
    Database SID finapp1t
    Preferred Connect String
    Edited by: sawright on Mar 29, 2012 11:24 AM

  • Sending mails even after changing the rpd.

    hi,
    i have successfully created the functionality of ibot, conditional ibot and chain ibot.
    i can see the report in the mails.and everything is working fine now.
    If i want oracle bi to send the mails (to let the ibot run ) even when i change the repository by making changes into instanceconfig.xml and NQSconfig.xml, will that be possible.
    for example
    i have created a repository Employee.
    which point to my oracle 1o g server named emp_server.
    I am using the employee_data schema out of it.
    which sends mails to employee which are there.for exampel abc, xyz.
    Now i want to create another ibot which would be different server in different schema and will be using different mailing list.
    i can do this by making changes in the instanceConfig.xml and NQSconfig.xml and can create ibots which will shoot mail to my manger list.This is also working fine.
    Problem is if i make change in above file my oracle BI will point to second rpd and mails from first rpd will not work.
    Can i make changes so that both the mails should work.of employees and manager too.
    thanks in advance.

    hi..
    think of merging of repositories..
    so that, all subject areas presents in single repository..
    this is common to merge different rpds, for every project. So that you need not to change each time you change the rpd...
    and all reports works fine... with single rpd..

  • Why i'm getting a warning 1021 even after changing The maximum number of connections per source (Unlimited) ?

    The maximum number of connections per source (Unlimited) for this connector has been reached by this source IP address.

    Hi Arun,
    In order to figure out the source of the problematic IP, we need to collect the following logs:
    Detail messages of the Error 1021 including the blocked IP address.
    Protocol log. We can search the specific IP address in the log to find more information about the sender. Here is the reference of
    Using the EAC to configure protocol logging.
    Besides, use the command below to verify if they are set as expected:
    Get-ReceiveConnector -Identity "this connector name" | select Message*,MaxInbound*
    Regards,
    Rebecca

  • Migration Assistant created new account to deposit all my stuff, but I can't access that account, even after changing the password via the main acct'

    I am at my wits end.  The migration assistant created a new profile (I didnt konw that it would do this) and now I can't get into that profile with all the stuff from my old PC. 
    I have tried changing password via the main account, but to no avail.  I have researched issues with Keychain, but all it tells me to do is change the login password - that doesnt work either - I cant get to all my files.

    Migraine Assistant it's called.
    Delete the account from the main one, create a new account and transfer files manually via a regular FAT external drive you pickup at any office or computer store, Mac's can read it.

  • I keep getting a DF024 error even after changing the filename

    The suggested fix for the DF024 error doesn't work. Trying to install Photoshop from the Creative Cloud app into an iMac running Yosemite. Any suggestions?

    Hi Arun,
    In order to figure out the source of the problematic IP, we need to collect the following logs:
    Detail messages of the Error 1021 including the blocked IP address.
    Protocol log. We can search the specific IP address in the log to find more information about the sender. Here is the reference of
    Using the EAC to configure protocol logging.
    Besides, use the command below to verify if they are set as expected:
    Get-ReceiveConnector -Identity "this connector name" | select Message*,MaxInbound*
    Regards,
    Rebecca

  • Firefox is already actif but does not respond. and even after changing the default properties the problem comes back (Read-only)

    everytime I close Firefox, it select the option "Read-only".
    I stop the proces via Task management and then I can start Firefox again. I close it and the "Red-only" option is back again.

    Do you get this error only after closing and restarting Firefox or always?
    In case of the latter:
    Do you still have a default profile and is the profile as you see in the profiles.ini file marked as "Default=1" still present?
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    Try to delete the profiles.ini file to force Firefox to create a new profiles.ini file and a new default profile.
    *http://kb.mozillazine.org/profiles.ini_file
    *https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
    *http://kb.mozillazine.org/Profile_in_use

  • My ipod 4g wont charge even after cleaning the port

    So i have this ipod 4g and once i had disabled it and i kept it in my pocket the whole day but after i enabled it then it sometimes charged and sometimes it didnt  so i cleant it with a compass but its still dead so now what and i even connected to my windows pc so i need a solution

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    If you can’t charge your iPhone, iPad, or iPod touch
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Error on adding items to a IDoc document after changing the port

    Hi friends,
    We have a process that generates a set of IDOCs for a payment proposal to an external entity, that worked perfectly until we changed to a new port. Before, the aggregation of items was taken for each document. After the change all items are added to the first document only.
    Steps:
    ZPCSC03 - Generates the set of IDOCs
    ZPCSC00 - handle the IDOC's created and generate a consolidated IDOC that sends to a EDI port.
    No changes were made to the programs so I think it is a parameterization fault. Any idea what might be wrong?
    I will appreciate your help.
    IVentura

    Below is the error we been getting...
    Operation 'impersonate' of Web Service 'com.siebel.analytics.web/soap/v1.SAWSessionService' at port 'SAWSessionServiceSoap' failed with the following explaination: "Authentication error. An invalid User Name or Password was entered.".(SBL-EAI-04308)

  • In my fire fox window every thing has disappeared including firefox tab and address and menu bars and the problem is persisting even after reinstalling the brow

    i used hotspot shield after that this problem occured. the whoole screen is blank and i cant see or do anything on firefox except closing it or opening a new tab via CNTROL +T

    You can check for problems with the localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf
    You can use this button to go to the Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Can you bring up the menu bar with pressing the F10 key or tapping the Alt key?
    *View > Toolbars (press F10 to display a hidden menu bar)
    Open the Customize window to set which toolbar items to display:
    *Firefox menu button > Options
    *View > Toolbars (press F10 to display the menu bar)
    *Right-click empty toolbar area
    *check that "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    *If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
    *if missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
    *if you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up

Maybe you are looking for