Problems losing quality when going from develop module to library module ?? anyone have a fix

Problems losing quality when going to library module from develop module. Sharpness and color quality decrease

This is normal. There will be a difference as you are comparing Library Previews with the image in Develop which accesses the original file, although the difference is usually slight. Real results need to be judged from exporting after selecting the output sharpening e.g. for glossy paper, if printing or screen sharpening for web images or emailing.
The idea with sharpening is to apply capture sharpening so that the image in Develop looks just sharp but not over sharp. Lightroom then uses the correct algorithm for output sharpening based upon image size and quality settings etc.

Similar Messages

Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from l

Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?

In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.

Print issues when going from develope to print

In LR5 when going from Develope to Print, I loose the picture and the print tab is greyed out. Never had this problem before, did I do something wrong

Make sure the source remains the same - check the filmstrip.
The only suggestion is to place the batch for editing and printing into a collection or (temporary) quick collection and access the images from there in both modules.

Why are my photos losing quality when they go online. this has started since i have start using lightroom cc

since i have started using lightrtoom cc with photoshop 2014 my photo seems to loose colour quality when they are posted online. they look good on my mac but not online. this is an issue i've been having since stared using the new lightroom. help please

i normally edit my photos in photoshop only but now i've stared using the lightroom cc. I start editing in lightroom then carry on in photoshop. after that i save as a JPEG file. when i look at the photo on the Mac it looks great but when it's on the online portal it looks like the colours faded. For some copyright issues i won't be able to post any photos as they are for clients

Does improving bit rate improve quality when importing from a lossy file?

Okay, if that question made no sense, here's an example:
I have a 5 Megabyte file encoded as an MP3 at 192 kbps.
I like to keep all my files in one format though, and currently my preferred format is AAC.
Would it make sense to convert it to 320 kbps AAC?
I get the feeling that since the data for that bitrate is gone (since MP3 is lossy)
it wouldn't make any sense trying to improve the bitrate. All I would get is a large file
that sounds the same as 192 kbps AAC.
Is that right?

Yes and No.
You are right that converting to 320kpbs AAC will not increase the quality since the data is already gone.
However for the next but you are slightly wrong.
What you will get is a large file that sounds the same as 192kbps MP3, which is not as good as 192kbps AAC (AAC is better quality than MP3 at the same bitrate).
Also, there is always a loss in quality when going from one lossy format to another.
If it's possible to go and re-encode the original source material at a higher bit-rate AAC I would definately do that, but if all you have is the 192kpbs MP3, then just leave them as they are and don't worry about having different formats.

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version? (mostly Helvetica) where and how do I get those Fonts? And/or, can I use the Mac version of these Fonts?

When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version? (mostly Helvetica) where and how do I get those Fonts? And/or, can I use the Mac version of these Fonts?
Thanks, Rich

In order to be cross platform you must be using the Open Type version of all fonts to cause the least disruption. Macs can read and process the Windows .ttf type format but PCs can't process Mac formatted type. Most recent versions also cannot use the older PS Type 1 fonts.

Lightroom 5. I've reinstalled it on a macbook pro but when I click "Develop" it states the module is disabled and I need to purchase a licence but I've got a full licence and it's running on another machine. How do I fix it?

Lightroom 5. I've reinstalled it on a macbook pro but when I click "Develop" it states the module is disabled and I need to purchase a licence but I've got a full licence and it's running on another machine. How do I fix it?

Lightroom doesn't launch or returns "Develop module is disabled" error after 5.5 update

Why won't cells autopopulate when using numbers on the ipad? Anyone have a fix? Have also created a dropdown menu, but that does not translate from excel to numbers either.

Why won't cells autopopulate when using numbers on the ipad as they will in excel? Anyone have a fix? I have also created a dropdown menu in excel, but that does not translate from excel to numbers either.

Glad you got it sorted out.
Diane123456 wrote:
> Thanks Vix, Joe, and Mad Dog for responding, the site is
in
> development so it's behind a password, which I probably
could share
> but MD is right, it was a margin issue. I didn't think I
needed to
> set a margin but I had to put a left margin of 2em on it
for the
> numbers to display on IE7 or IE6
>
> This is actually a rather common issue with CSS layouts
(it is not an
> issue with designs using tables) - there are several
posts for ULs
> which you may be interested in - see
>
>
http://www.adobe.com/cfusion/communityengine/index.cfm?event=showdetails&postId=
> 1981&productId=1&loc=en_US
>
> -- and once I got the numbers to show I ran into the
same problem as
> the commenters on the above thread, which noticed that
the vertical
> alignment doesn't work well with IE, and which noted
that apparently
> IE has a stutter because it just kept repeating "1" "1"
"1" -- so I
> finally went with a hanging indent and just put the
numbers in there
> manually - fortunately it's not a long list.... if you
have a fix
> for the stutter, or know of another place to get help
with CSS layout
> browser quirks please share -- if I find another one
I'll share also
>
> thanks again, Diane

I am using PSE 9. I had no problem opening my Raw files from my Canon Rebel XT Now I have a Rebel 5ti and pse 9 won't reconize the Cr2 files

I am using PSE 9. I had no problem opening my Raw files from my Canon Rebel XT Now I have a Rebel 5ti and pse 9 won't reconize the Cr2 files

See this faq:
FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?
That will explain why each new camera model uses its own raw format. (.CR2 does not indicate a format, only a Canon family of formats).
The first link tells you what version of camera raw is needed for your camera : https://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
You need ACR 7.4
The second link tells you which ACR versions are supported by Elements versions Camera Raw-compatible Adobe applications
PSE9 supports version 6.5
Further down on that paper, you get links to download the free Adobe DNGconverter for Mac or Win.
This standalone software can batch convert a whole folder of raw files to the DNG raw file format that your present PSE9 can read.
Otherwise, you would have to upgrade to version 10 or later.

I keep receiving an error 8268 when downloading content from the iTunes Store. Does anyone have solution for it?

I keep receiving an error 8268 when downloading content from the iTunes Store. Does anyone have solution for it?

contact iTunes Customer support to resolve this issue. They will provide you a fresh copy of the song

Updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

I use a windows 7 pro and have no problem like that from bridge cc when I select a thumbnail then use menu Tools>Photoshop>Image Processor.. I see Adobe Photoshop CC 2014 start up then I see the Image processor dialog and that one file is selected in the bridge I the complete the dialog and click run. The image files are created. Photoshop remains open after the image files are create with no open documents. I need to click on the bridge in the task bar to bring bridge back into focus.
What does you system configuration?

Since I have connected my iPad with the MacBook through ICloud I have problems in Preview of opening PDF- and JPG-files. Does anyone have a solution for this?

Since I have connected my iPad with the MacBook through ICloud I have problems in Preview of opening PDF- and JPG-files. Does anyone have a solution for this?

I'm not sure I understand the connection between iCloud and this problem. Is it simply a problem of coincidental timing (ie, the problem happened after you set up iCloud)? If so, there's almost certainly no connection between these two events.
Where are you getting the files you're trying to open, and what specifically happens when you try to open them?

Losing audio quality when exporting from premiere pro

I have now had this happen with two different videos. I play the video in premiere pro and the audio is fine. I export the video and lose most of the quality of the audio portion. One project is a music session when exported I only get the main vocal the drums aren't audible only a buzz sound is made where the kick drum would usually come in. On another project is a thank you video for a family member and the audio is distorted after being exported. The audio sounds fine inside of the session. Once exported the audio will still work fine on my computer and my iphone 5s as long as I'm wearing headphones, once I try to play the video through my iphone 5s speakers the audio quality is gone, making the noises as previously stated. My iphone can still play other tracks fine but videos and audio exported from Premiere Pro are distorted. Any advice on how I can export the video so I wont lose audio quality when playing the video on an iphone? I know it's not my iphone speakers, they play other songs just fine.

The source files as far as the audio goes are wav files that I've pulled off of my desktop. My sequence settings are 1920 by 1080 at 29.97 frames per second. The export settings are H.264 with the preset YouTube (HD 1080 29.97 FPS) and I've also tried HD video 1080p 29.97 FPS. If this isn't enough information please let me know I'm in the learning phase. Audio wise the quality is set to high and I'm exporting at 4800 kh and a bit rate of 190. I've also tried a bit rate of 320 and 264 I think it is and still had the same problems. Let me know if I need to do screen shots I really want to figure this out.
Thanks for your help!

Encountered problem when converting from development to runtime environment

1. I ran apxdevrm.sql switch my environment to runtime. Although it seemed to finish successfully, this error was in the log and according to registry, my installation was invalidated(still works though).
drop package wwv_flow_create_flow_api (doesn't seem to exist)
ERROR at line 1:
ORA-04043: object WWV_FLOW_CREATE_FLOW_API does not exist
Entry in dba_registry:
COMP_NAME--Oracle Application ExpressSTATUS
STATUS--INVALID
2. Next, not sure if it had made the switch, I then ran apxdvins,sql to revert back because of problem #1. (later found out that it was still devl environment)
This time, this message appeared in log...
FAILED CHECK FOR TRIGGER BIN$UH58A027El3gRAADutXi8w==$0
(Installation still invalid)
Any ideas?

1. Commented "drop package" stmt out on apexdevrm.sql to get rid of non-existent package problem. (probably holdover from v3.0)
2. purged dba_recyclebin to get rid of problem #2.
Dba_registry entry still shows as INVALID... Has anyone else encountered these problems when switching from dev to runtime? (or vice-versa)

Problems losing quality when going from develop module to library module ?? anyone have a fix

Similar Messages

Maybe you are looking for