Problems model m1005mfp while printing a line about 5 cm goes blank or faint

Sir i bought an hp laser jet m1005 MFP printer recently with expections of good quality printing . But just after about 20 printouts . the printer began to create problems. After about every two to three printouts there goes a broad line of about 5 centemeters goes faint and the text within that line or belt are so faint that they cant be read and after every print the faintness goes on increasing.
Sir I am in desperate need of resolving this issue as my officework needs my printer to be ok and without such problems.
Just after two days of buying it should start giving problems is incomprehnsible to me
Please help

Hello ok_computer?
Thank you for providing your computer's information. I my self am not familer with windows 8. Before we begin can you please check your warranty status? All HP computers come with a one year waranty some even come with a two year waranty. Looks from detail information you provided it is Memory Card went bad or the Hard Drive. HP Technical Support will tell you to preform these dianostic proceedures.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03408309&tmp_task=solveCategory&cc=us&dlc=en&lc...=
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03561456&tmp_task=solveCategory&cc=us&dlc=en&lc...
Both parts you can install your self versus sending it in for HP to repair. You will have a better ideal ounce these are performed. Thank you. frrw

Similar Messages

Officejetpro K5400dn prints garbled lines about every 1/4 page. Help

I have an Officejet Pro K5400dn printer purchased in October 2009. I had a problem immediately with the printer and HP replaced the item immediately. For the past two months it has suddenly started printing constantly about one print line every 1/3 of the page totally garbled. I have uninstalled and reinstalled drivers with no effect. I have run Win XP Pro SP3 since I purchased the printer. The print diagnostic application detects no defects. I met a HP field representative about a week ago and he tried to tell me how contact HP for help but what I remember to do does not work. I cannot contact anyone to help unless I want to pay for support. Does this action ring a bell with anyone?? It has been a super workhorse and quality machine since I began using it.

Crazy text is no good. Try the steps outlined in the article below and let us know if it helps.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01954177&cc=us&dlc=en&lc=en
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Reader 10.0 Printing Problem - Font changing while printing

Dear all,
can anybody help me on my printing problem with Adobe Reader 10.0 ?
While printing a pdf I cannot do anything else, it is not possible to touch the mouse
because when I do this, the font is changing while printing to something like grecian.
Can somebody help me on this ?
Reader 9 did not cause this problem.
Thanx and best Regards, Travelplan24

I have the same problem, but I didn't realize it could be set off by my working on another task. It is also triggered when the pdf has scientific notation, or a very extreme change in font and font size. E.g., text in boxes, algorithms, etc. seem to trigger the problem.
I have reinstalled my print driver (several times, latest on Sunday), and reinstalled Adobe Reader (now 10.0.1) but the problem remains.
Printer:
HP Officejet 6500 (E709n Series) wireless, now on USB.
Document properties: Most recent font conversion - yesterday:
Producer: Distiller 4.0.2 for Mac
PDF version: 1.3 (Acrobat 4.x)
Fonts: Helvetica-Neue, Type 1, Encoding: ANSI and Roman
The font is not converting into Greek. E.g. "Problem-Solving Process" became "Qspcrfm . Tpnwjoh!Qspdftt"' with the kerning overlapping characters.
The font 'conversion' has happened many, many times on a wide variety of pdf files in the past 6 months. Never had the problem before. I had downloaded new Reader, and purchased the new printer -- I do not know which change created the problem.
I will cease doing anything when I print as a temporary workaround, but that is not a good solution.
I sure hope you can figure out what the bug is. Thanks in advance.

Problem with fonts while printing PDF in MAC OS

I have PDF file. It contains Cyrillic fonts and looks OK on the screen in MAC OS
But during printing all labels are presented wrongly and not readable. I have tryied two options:
1) Opened PDF in built-in MAC OS Viewer
2) Downloaded and installed Acrobat Reader and printed from it
Printing results by both methods are different, but in both cases text is not readable.
Attaching screenshots (part of laptop screen) from laptop screen and printing results (scanned paper sheets)
Printer: Cannon MP560 (with standard driver version 10.84.2.0)

Max,
Try Troubleshoot fonts | Mac OS X and go through each step. You can probably skip step 1 as it's already displaying correctly. Good luck.

Error while running base line update

I am getting below error while running baseline update in endeca environment. please help me out to resolve this issue.
./baseline_update.sh
WARNING: /opt/endeca/PlatformServices/6.1.0/j2sdk/bin/java does not exist
WARNING: Using java in /usr/java/jdk1.6.0_25/bin/java
[11.29.12 13:15:00] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
[11.29.12 13:15:02] INFO: Definition has not changed.
[11.29.12 13:15:02] INFO: Starting baseline update script.
[11.29.12 13:15:02] INFO: Acquired lock 'update_lock'.
[11.29.12 13:15:02] INFO: Downloading config files from Web Studio.
[11.29.12 13:15:02] INFO: [ITLHost] Starting shell utility 'emgr_update_get_ws_settings'.
[11.29.12 13:15:03] SEVERE: Utility 'emgr_update_get_ws_settings' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host ITLHost.
Occurred while executing line 13 of valid BeanShell script:
10| if (Forge.isDataReady()) {
11| if (ConfigManager.isWebStudioEnabled()) {
12| // get Web Studio config, merge with Dev Studio config
13| ConfigManager.downloadWsConfig();
14| ConfigManager.fetchMergedConfig();
15| } else {
16| ConfigManager.fetchDsConfig();
[11.29.12 13:15:03] SEVERE: Caught an exception while invoking method 'run' on object 'BaselineUpdate'. Releasing locks.
Caused by java.lang.reflect.InvocationTargetException
sun.reflect.NativeMethodAccessorImpl invoke0 - null
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.exception.EacComponentControlException
com.endeca.soleng.eac.toolkit.utility.Utility run - Utility 'emgr_update_get_ws_settings' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host ITLHost.

Welcome to forum, Please raise only one thread for same problem..
error while running base line update
-RMishra

My print job is very slow. Appears to print a line then pause for awhile before printing another

psc 2175xi printing problems. Appears to print a line followed by a long pause before printing the next line or two. I tried turning off the power to reset the printer, tried troubleshooting with online services and also tried uninstalling and reinstalling. Not sure what to try next. Any ideas?

This is caused by the failure of one of your cartridges. I do not recall if the the PSC 2175 supports reserve mode printing with one cartridge removed, but try the following: Remove the black cartridge and print a test page. Does the printer print at normal speed? Is so the black cartridge was the issue and should be replaced. If not then put the black cartridge back in and remove the color cartridge and print test page. If the printer now prints normal speed the color cartridge was at fault and needs to be replaced.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Why does my C5240 printer print some lines on a page and skips others? Why does it sometimes double

Computer is an iMac wit OS X 10.4.11. I have used this computer and printer for 2 years or more with no problems. Now it prints out lines in bold on a page but not lines in regular.I've tried copying text to a different page and restarting printer. Will try restarting computer.
Sometimes it prints out gobblygook. If I restart the computer and printer and transfer the text to a different page, I can get the page to print correctly.
Help would be appreciated. I need this text for a 4-hour meeting tomorrow morning!
Nancy

Hello,
Thanks for the post. We may have a ink related issue here, I've attached a couple of links below that may assist with this issue. (unfortunately not with the 35' of snow though) Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00257147&tmp_task=useCategory&cc=us&dlc=en&lang...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00947099&tmp_task=useCategory&cc=us&dlc=en&lang...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Issue while printing to A4 from Xerox J75 (fiery) through Mac OSX 10.9.3.

I've encountered an issue while printing to A4 from Xerox J75 (fiery) through Mac OSX 10.9.3.
The document and printer settings are set for A4 but the print job goes to the printer as A3.
The problem only occurs while printing through Adobe Photoshop CS6.

I get into trouble if I choose A4 borderless instead of A4 in the Photoshop Print settings.
There, Tray 2 is dimmed out
To be honest, I don't see borderless in your settings, but my doing that on my printer causes a default to the larger Tray 1.
That's all I have tonight. If I think of anything else, I'll post it. Here's thread on this issue as well.
Wrong paper size sent to the printer

2D Graphics (I can't print thin line, point, etc.)

I created a program that draw and print
a graph.
I have used 2D Graphics.
But I have some problem:
I can't print thin line, point, etc.
Thanks in advance
Gali
null

I created a program that draw and print
a graph.
I have used 2D Graphics.
But I have some problem:
I can't print thin line, point, etc.
Thanks in advance
Gali
null

Problem is occurring in docx format; it is not printing "New Line" character in extracted txt using IFilter (offfiltx.dll) while with doc file IFilter (OffFilt.dll) is working fine.

Problem: Problem
is occurring in docx format; it is not printing “New Line” character in extracted txt using IFilter (offfiltx.dll) while with doc file IFilter (OffFilt.dll) is working fine.
Environment: -
Operating
System:
Windows XP SP2/7
Language:
C#
MS
Office Version: - MS Office 2007/2010/2013
Problem
Description: -
We
havedocx
file with new line character, and we are processing this file in IFilter for extracting text, and it is giving output with concatenation of lines.
Docx
file format (Sample.docx)
Test this music
Word processing
Testing docx file
Output:
- Test this music Word processing Testing docx file
Requirement:
- We
have requirement to get following text in particular format with New Line from docx because client is using docx format only.
Test this music
Word processing
Testing docx file
Attempt:
We have tried a lot after changing IFilter configuration,
but it is not giving required output. Then we saved same file in doc format (Sample.doc), which is giving required output.
Because it is application specific problem, kindly
assist to resolve issue on priority. We are sharing IFilter paths for extracting text for doc and docx.
Doc Filter Location: - %systemroot%\system32\OffFilt.dll
Docx Filter Location: - <Drive>:\PROGRA~1\COMMON~1\MICROS~1\Filters\offfiltx.dll
Code Snippet for setting property of filter
internal static IFilter LoadAndInitIFilter(string fileName, string extension)
            IFilter filter
= LoadIFilter(extension);
            if (filter
== null)
                return null;
            IPersistFile persistFile
= (filter as IPersistFile);
            if (persistFile
!= null)
persistFile.Load(fileName, 0);
                IFILTER_FLAGS flags;
                IFILTER_INIT iflags
=
                            IFILTER_INIT.CANON_HYPHENS
|
                            IFILTER_INIT.CANON_PARAGRAPHS
|
                            IFILTER_INIT.CANON_SPACES
|
                            IFILTER_INIT.APPLY_INDEX_ATTRIBUTES
|
                            IFILTER_INIT.HARD_LINE_BREAKS
|
                            IFILTER_INIT.FILTER_OWNED_VALUE_OK;
                if (filter.Init(iflags,
0, IntPtr.Zero, out flags)
==IFilterReturnCode.S_OK)
                    return filter;
            Marshal.ReleaseComObject(filter);
            return null;
Kindly
assist to resolve this issue and also let us know if any input is required.
For any help, we would be really
thankful.

Kindly
assist to resolve this issue and also let us know if any input is required.
For any help, we
would be really thankful.

While printing from word appl. printer after each line puts in number of page,

while printing from word appl. printer after each line puts in number of page, so I do not print 3 pages but 5 instead. What to do?

What printer models is this intended for? I assume it is aimed at the lower end inkjets, with the suggestion of loading 10-25 sheets of paper.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Officejet Pro 8610 bought 2 weeks ago. giving vertical lines while printing.

Dear Sir,
I bought new officejet pro8610 . 2 weeks ago. its giving vertical lines on printing any document from printer. scanner is absolutely fine just problem while printing and copying. i clear printhead few times.
i just check that when i am printing any paper from windows photo viewer,there are lines like this.
but when i copy the same image in Ms Word 2007 and print it from there. the paper is clean without lines. its strange. while i have anyother printer HP Laserjet Color CP1025 attached with same computer . i print the same image from CP1025 from Windows Photo viewer, its clean from there without lines. can any one help me out from this issue

Dear Sir,
I bought new officejet pro8610 . 2 weeks ago. its giving vertical lines on printing any document from printer. scanner is absolutely fine just problem while printing and copying. i clear printhead few times.
i just check that when i am printing any paper from windows photo viewer,there are lines like this.
but when i copy the same image in Ms Word 2007 and print it from there. the paper is clean without lines. its strange. while i have anyother printer HP Laserjet Color CP1025 attached with same computer . i print the same image from CP1025 from Windows Photo viewer, its clean from there without lines. can any one help me out from this issue

Problem with computing Font width while printing in Landscape mode

I have an application which prints a table and fills it with some text. I render it on a JComponent using the drawString(theStr, xPos, yPos) and the drawLine(rigtX, topY, rigtX, botY) methods in Graphics2D object. I want to take print-out of the table and also store the image of the table in, say, jpeg format. The print can be in Landscape or Portrait format depending on the size of the JComponent, which the user sets depending on the table size and the font size.
I have a paintTable( ) method which contains all the drawString( ) and drawLine( ) methods. This method is called from the paint( ) method of the JComponent to achieve normal rendering. The same method is called to get a BufferedImage of the Table. The same method is further called from the implementation of print( ) method from the Printable interface.
In the paintTable( ) method, I compute the pixel coordinates of the table grid lines and the texts positions in the tables depending on the font width and height obtained as shown below:
        // Set the Font
        Font theFont = graphics.getFont();
        theFont = theFont.deriveFont((float)TableFontSize); // TableFontSize is an int of value 8,9,10 etc.
        graphics.setFont(theFont);
        // Get the Font Size
        FontRenderContext frc = graphics.getFontRenderContext();
        float width = ((Rectangle2D.Float)theFont.getMaxCharBounds(frc)).width;
        float height = ((Rectangle2D.Float)theFont.getMaxCharBounds(frc)).height;
       System.out.println("FONT WIDTH HEIGHT [" + width + "," + height + "] ");I am getting the following value of width and height when the above print statement is executed with a value of 9 for TableFontSize. FONT WIDTH HEIGHT [18.0,11.3203125]
The problem I face is :
While Printing in Landscape mode the value of the 'width' variable printed as given above is becoming negative. Kindly see the values: FONT WIDTH HEIGHT [-9.37793,11.3203125]. This is happening ONLY DURING PRINTING IN LANDSCAPE MODE. This makes my calculation of table grid line coordinates and text positions completely wrong and the table goes out of place.
Kindly note that, there is no problem during normal rendering and BuffereredImage creation and also while printing in Portrait mode. The problem happens irrespective of Linux or Windows. The value of 'height' is always correct.
Kindly let me know: If the method I use to get the 'width' and 'height' is correct ? Is there any better way which will work fine in all platforms under all circumstances.
Kindly help me to sort out this issue.
Thanks a lot in advance and best regards
-acj123

I have extracted the relevent code and made a stand alone program.
The complete code is enclosed; including that for printing.
Kindly go through the same and help me to solve this problem.
Thanks again and regards
-acj123
import java.awt.*;
import java.util.*;
import java.awt.geom.*;
import java.awt.event.*;
import java.awt.print.*;
import java.awt.print.PrinterJob;
import java.awt.font.FontRenderContext;
import java.awt.image.BufferedImage;
import javax.swing.*;
import javax.print.attribute.*;
import javax.print.attribute.standard.*;
public class MyCanvas extends JComponent implements Printable, ActionListener
    int TableFontSize = 9;
    private Graphics2D graphics;
    public MyCanvas(JFrame frame)
        frame.getContentPane().setLayout(new BorderLayout());
        frame.getContentPane().add(this, BorderLayout.CENTER);
        frame.setJMenuBar(createMenuBar());
    public JMenuBar createMenuBar()
        JMenuBar menubar = new JMenuBar();
        JButton printButton = new JButton("Print");
        menubar.add(printButton);
        printButton.addActionListener(this);
        JButton imageButton = new JButton("Image");
        menubar.add(imageButton);
        imageButton.addActionListener(this);
        JButton drawButton = new JButton("Draw");
        menubar.add(drawButton);
        drawButton.addActionListener(this);
        JButton closeButton = new JButton("Close");
        menubar.add(closeButton);
        closeButton.addActionListener(this);
        return menubar;
    public void actionPerformed(ActionEvent evt)
        String source = evt.getActionCommand();
        if (source.equals("Close"))
            System.exit(0);
        if (source.equals("Image"))
            getImage();
            return;
        if (source.equals("Print"))
            printCanvas();
            return;
        if (source.equals("Draw"))
            repaint();
            return;
    public BufferedImage getImage()
        Dimension dim = getSize();
        BufferedImage image = (BufferedImage)createImage(dim.width, dim.height);
        this.graphics = (Graphics2D)image.createGraphics();
        System.out.print("\nImage ");
        paintCanvas();
        return image;
    public void paint(Graphics graph)
        this.graphics = (Graphics2D)graph;
        System.out.print("\nDraw ");
        paintCanvas();
    public void paintCanvas()
        // Set the Font
        Font theFont = graphics.getFont();
        theFont = theFont.deriveFont((float)TableFontSize);
        graphics.setFont(theFont);
        // Get the Font Size
        FontRenderContext frc = graphics.getFontRenderContext();
        float width = ((Rectangle2D.Float)theFont.getMaxCharBounds(frc)).width;
        float height= ((Rectangle2D.Float)theFont.getMaxCharBounds(frc)).height;
        System.out.print("FONT WIDTH HEIGHT [" + width + ", " + height + "] ");
        System.out.print(" SIZE "+ super.getWidth() +", "+ super.getHeight());
    public int print(Graphics graph, PageFormat pageFormat, int pageIndex)
        throws PrinterException
        if (pageIndex > 0) return Printable.NO_SUCH_PAGE;
        this.graphics = (Graphics2D)graph;
        graphics.translate(0,0);
        paintCanvas();
        return Printable.PAGE_EXISTS;
     * Interface method for Printing the Canvas on Paper
    public void printCanvas()
        PrinterJob printJob = PrinterJob.getPrinterJob();
        printJob.setPrintable(this);
        PrintRequestAttributeSet attr = new HashPrintRequestAttributeSet();
        if (super.getWidth() < super.getHeight())
            System.out.print("\nPrint PORTRAIT ");
            attr.add(OrientationRequested.PORTRAIT);
        else
            System.out.print("\nPrint LANDSCAPE ");
            attr.add(OrientationRequested.LANDSCAPE);
        Dimension dim = getSize();
        attr.add(new MediaPrintableArea(1, 1, dim.width, dim.height,
                                              MediaPrintableArea.MM));
        attr.add(new JobName("MyCanvas", Locale.ENGLISH));
        attr.add(new RequestingUserName("acj123", Locale.ENGLISH));
        if (printJob.printDialog(attr))
            try
                printJob.print(attr);
            catch(PrinterException ex)
                ex.printStackTrace();
    public static void main(String[] arg)
        JFrame frame = new JFrame("MyFrame");
        MyCanvas canvas = new MyCanvas(frame);
        frame.setSize(800, 600);
        frame.setVisible(true);
}

Black line on right side of paper while printing on laserjet 1018

WHILE PRINTING DARK BLACK LINE IS APPEARING ON RIGHT SIDE OF PAPER.

It is time for maintenance on your printer. Perform an alignment.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Misalignment problem while printing in MP237

I've Pixma MP237 which prints misalignment ,
while some straight line is there it prints like cut and also prints spelling and alphabet like they are broke form half.
So I need help to resolev this problem, so what should I do to make it smooth going?

Hi Harikrishna,
Which printerdevice you using .Is it supports uk language.Try to findout proper printer device for this.

Problems model m1005mfp while printing a line about 5 cm goes blank or faint

Similar Messages

Maybe you are looking for