Problems mounting ISOs on Windows Vista SP2

I've been trying for the last few days to try to mount and ISO through Daemon Tools and Magic Disc to try to run a setup of a game. However, whenever I get into the autorun of the disc and click the setup button, all I get is a command prompt line for a split second and then nothing. I've tried mounting this disc on my PC running Windows Vista and it installed perfectly, no trouble at all. It also seems like Daemon Tools on my Mac is breaking some of the files, because on my MBP I noticed that some of the pictures are corrupt, but when I run it on my PC those pictures are fine and it's the same ISO file!
Does anyone know a remedy for this? I'm running Windows Vista SP2 on a 17" MBP Unibody 2.8GHz. Thank you!

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

Similar Messages

Windows Vista SP2 fails to install

When I install Vista SP2 on my Vista Ultimate X86 on my dell optiplex 745 I get the following error
Installation was not successful
error true_e_nosignature(0x800b0100)
I tried running the System Update Readiness and the standalone installer and didn't work. here is the log of the System Update Readiness.
Checking System Update Readiness.
Binary Version 6.0.6002.23186
Package Version 25.0
2014-11-28 10:08
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
(f)   CBS MUM Missing   0x00000002   servicing\Packages\Package_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.mum
Checking Component Store
Summary:
Seconds executed: 1353
Found 1 errors
CBS MUM Missing Total count: 1
Unavailable repair files:
   servicing\packages\Package_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.mum
   servicing\packages\Package_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.cat
Checking CoreOS key for repairing corruptions.
Winner version: 6.0.6001.18000.
Processor architecture: x86.
Check key to be repaired: wcm://Microsoft-Windows-CoreOS?version=6.0.6001.18000&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers\metadata\elements\ComputerName
Recreated value: @_type.
Recreated value: @dataOnly.
Recreated value: @default.
Recreated value: @description.
Recreated value: @displayName.
Recreated value: @handler.
Recreated value: @legacyName.
Recreated value: @legacyType.
Recreated value: @migrate.
Recreated value: @scope.
Recreated value: @xsd:type.
Also Microsoft Tinker, Dreamscene, Microsoft .NET framework 3.5 Service Pack 1 and .NET framework 3.5 Family update (KB951847) and others failed too.

Further examination showed, that the problem lies in the expired digital signatures
of the MSI-s that clickonce tries to download.
Please see attached image Capture.PNG.
I also reported this bug to the Microsoft Connect: https://connect.microsoft.com/VisualStudio/feedback/details/1082242/clickonce-unable-to-install-localdb-2012-on-windows-vista-sp2
The problematic MSI-s shoud be signed again. Can I expect from Microsoft to resolve
this?
Hello,
Based on your description, it seems that this issue only occurs on Windows Vista SP2, and I get that connect you shared and have helped to vote it.
I think that Microsoft engineers will evaluate them seriously and provide you better support. In addition, you can post the answer here once the issue is resolved.
Best regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Poblem connecting CISCO anyconnect secure mobility client ver. 3.1.04 versus Windows VISTA SP2: Login denied

Hi,
Suddenly I have this error with my client cisco AnnyConnect ver. 3.1.04063 connecting with my computer:windows vista SP2.
Message appeared: "Login denied. "name_company" security policies have rejected your login" and nothing else.
I tried to uninstall and reinstall the client annyconect ver.3.1.04063 but not success, the same message, I think it's a problem with my computer because my user id with other computer colleagues runs ok and I can authenticate perfectly.
Few days ago and always I have worked without problems then I don't know what happens...perhaps an automatically update of windows vista¿?
Anyone of you with similar issue or problem?
Thanks in advance.

I have another computer with windows 8.1 and Cisco VPN Anyconnect version 3.1 works fine ! what is wrong with this computer. After a little bit of research I realised that this issue is from cisco hostscan. Interesting enough comp A(computer A) where vpn client works does not have cisco host csan folder in program files (x86). On this computer I did saw that folder and deleted it.
I found the following information
C:\Users\<user>\AppData\Local\Cisco\Cisco HostScan\lib has some sort of .libs for various antivirus.... I have AVG Antivirus 2015 and Spy Bot ...
I have attached log files, if anybody wants to investigate then you are more than happy to investigate. Happy to be of help in case if you need any further input.
Tired of breaking my head...

CS-15 and Windows Vista SP2

Hi,
I´m wondering if it is possible to connect to internet with the CS-15 usb modem when I´m using Windows Vista SP2? It hasn´t been any problem when installing the modem and it gets contact with the 3G net too.
The problem is that I can´t connect to internet. When I´m trying I get the message "No available connection profile". When I go to options/settings/connections in the Nokia Internet Modem software there is the same "No available connection profile" message too. If I try to create a new profile I get the message: "The name is invalid: (connection name)"
I have tried every possible solution I have thought of and that I have find on different forums on Internet with no result. When I tried the modem on my parents computer with Windows 7 it worked just fine!
Because of all this I think that the CS-15 modem isn´t compatible with Windows Vista SP2. Does someone now if this is the case, and is there any update available to get it working with Windows Vista SP2? I have to get a solution soon because i just trying the modem out, and if I don´t get it working within a few days I have to return the modem back to the seller.
Thanks,
Moffa

Thanks for the head's up Walter.
Do we have any idea when 7 will be released?
Secondly, is there any known workaround? I've found some of the web that extended the FileSystemView, but when I attempted one of them, it kept *.lnk files from appearing the Drop Down menu, but if I clicked on one in the window of the chooser, it broke with the same error.
The only reason I ask for a work around, is my employeer is not the fastest about updating the JRE allowed on the network/machines, so I may be stuck with 1.6.0_22(b02) for a while.
Again, thanks for the guidance.

HP Pavilion dv6 1133-ea Windows Vista SP2

So after install windows vista sp2, I have noticed that the sound has disappeared...all the drivers are installed! AND I really cannot see why the sound would not be there because the drivers and everything are fine...is it some sort of compatability problem?

Hi,
Try the following.
First, uninstall Skype and when this has completed, restart the notebook.
When windows has reloaded, download and reinstall the Chipset driver Here.
When the installation has finished, restart the notebook again.
Let windows fully load, then download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45044.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook.
Let Windows fully load, then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Reinstall Skype and see if the Mic now works Ok.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Problems downloading iTunes to Windows Vista

Has anyone had problems downloading iTunes to Windows Vista. If you have what problems have you experienced, and how do you fix it?

If you want your own problem(s) fixed, it would be easier and quicker to post it and what you have tried to resolve it.
If you simply want to see what others have had problems with, read their posts.

I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?

I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?

Hi rmarchione,
Can you try restoring preferences and let us know if it helps?
Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
Thanks,
Preran

3000Q 100 and Windows Vista SP2

Recently I installed Windows Vista SP2 on my 3000Q 100 desktop. However, after the installation there was an error at bootup.
0162 Configuration Error. Press F1 to change settings or F2 to use previous settings.
Pressing F2 allows me to enter into Vista, but the date will be reset to 1 January 2006 12.00 am. It is not pleasant having to change the date everytime I boot up.
I wanted to do a system restore, but I don't know how I managed to erase the system restore file before installing SP2. So system restore is not possible.
I uninstalled SP2, and now I have a new error:
098: Unauthorized change in BIOS detected. Press F1 to change settings or F2 to use previous settings.
Similarly, F2 allows me to go back to windows, but then the date resets again!
Anyone can help?

Thanks for the head's up Walter.
Do we have any idea when 7 will be released?
Secondly, is there any known workaround? I've found some of the web that extended the FileSystemView, but when I attempted one of them, it kept *.lnk files from appearing the Drop Down menu, but if I clicked on one in the window of the chooser, it broke with the same error.
The only reason I ask for a work around, is my employeer is not the fastest about updating the JRE allowed on the network/machines, so I may be stuck with 1.6.0_22(b02) for a while.
Again, thanks for the guidance.

No audio device installed after windows vista sp2 update

Ok I will try to be as thorough as possible because I want to fix this problem and I hope somebody can help me.
So A few days ago There was an update for my audio driver so I accepted.
But after this update my sound worked but on next use the sound was gone.
So......I used system restore but no help the same thing happened
I went to the hp website to look up my audio driver for my model which was conexant audio 221
After download the driver wouldnt let me install it. I go to check in device manger to install it manually and the sound section is gone literally so i cant reformat or reinstall or anything 0.0
Somebody told me I need to upgrade to windows vista x64 sp2 which was in windows update.
So i tried it and still the same crap
I cant install the sound driver because there is no place in the device manager to install it to
I just get a message saying device installation failed device not found
i dont know what to do
My laptop is a hp dv2700 special edition notebook
Ive had it for a year no problems and this is the first major problem I've had ..............HELP
Past audio driver was conexant : Conexant High-Definition SmartAudio 221 Driver
Ive tried reading through support forums but you have to understand THE SOUND VIDEO GAME CONTROLS SECTION IN DEVICE MANAGER IS GONE
when i go into the programs I find my audio devices which are conexant hd audio and conexant hd audio soft fax modem with smart cp but when I click on them nothing happens

hi, im also exp. the same <text deleted> problem! i also get that error message "quick touch on screen display has stopped working" , lower right corner(volume icon)says"no audio output device is installed", no "video,sound & controllers" on device manager, i had tried reformatting, multible virus\malware scanners, ive tried multible registry cleaners, DL updated drivers, bios, audio(can't install,no audio device),and ive tried all of these conbinations with or without the windows updates, besides the audio prob, the cd/dvd icon's gone frm My comp, cant use the mic, and or webcam, SMART is detecting a hard disk failure now(iminent 2 fail) <text deleted> !,lol... ps HP or Microsoft really needs 2 take this into consideration, im tired of this, i will never buy another HP ever!! or windows!, **bleep** it if i have 2 spent another thousand dollars on a Mac,atleast ill get a much decent,"working" pc, that wontstress the **bleep** out of my mind!
Message Edited by WendyM on 08-09-2009 07:35 PM

Windows Vista SP2 crashes Creative Console Launcher.

I've erased my harddisc and reinstalled Windows Vista Home Premium SP x64 and then upgrade it to the new SP2. After I've installed the updated driver to my Soundblaster X-fi Extrememusic and the updated softwares it crashes the Creative Console Launcher. This is what happens: I open the Creative Console Launcher and then I go to the Graphic Equalizer to change the EQ. After I have done that, I got a message like this: "Creative Console Launcher has stopped working and Windows must close it down". Is there any solutions for my problem
hockey

I had a similar problem when installing Vista sp 2. What I did was remove all creative drivers and programs and reinstalled Daniel K.'s X-FI 2.0 package. My console launcher did the exact same thing, but I was using Creative's newest Console Launcher. When I reinstalled everything (which is included in the package) everything worked really well.
I sometimes switch between drivers included in Dan K.'s pack and the package with a final overlay of the newest Creative Labs driver.
here is a link: Dan K 2.0 X-FI inclusi've driver pack/update
Cheers,
jmacguire

Is Verizon going to acknowlege the problems with FIOS and Windows Vista

For months now, I have been reading the numerous problems Fios internet customers are having with Fios internet/Actiontech Router and Windows Vista and there has been no acknowledgement by Verizon of this current major issue.
I have also experienced the exact same issue for months now since I switched to Verizon FIOS internet. Previously I had Comcast HSI using my Windows Vista laptop. I had their service for over a year and I NEVER has a problem with the Windows Vista globe icon disappearing and loosing internet connection. The Globe always stayed on and never went away and I never lost connection when I had Comcast
I had Verizon FIOS installed last September with my Windows Vista computer and my wireless internet connection started to drop from day 1 and it has been a daily occurrence for over 5 months now. It has gotten so bad, I have had to hardwire my laptop to to be able to use the internet uninterrupted.
This is what daily scenario is:
When I turn on my laptop(with Windows Vista, I can initially get full internet access(with the globe on and it says "Local and internet). After about 10 minutes or less, the globe switches to "local only" and I can still get internet access. After another 5 or so minutes, a large X covers the globe and I lose internet connection entirely. The actiontech router wireless signal is no longer listed as one of the wireless networks. The only way for me to regain internet access is either to restart my laptop or reboot the actiontech router.
Numeorus posts here, over by DSL forums(Broadband Reports),Microsoft's website and a few othere websites detail this issue.
I am extremely shocked and surprised that Verizon has not tried to fix this issue by working with both the makers of the Actiontech Router as well as Microsoft to find out what the problem is and how to fix it.
I would just like to reiterate I strongly believe this is primarily a FIOS internet issue since I previously had Comcast HSI for over a year with the same Windows Vista laptop and I NEVER had that problem. Also, I can connect to my neighbors wireless connection(she uses Comcast HSI) and when I do, the globe stay on all the time on my computer and the internet does not lose connection.
I know that there are a couple of Verizon employees here. Please tell the higher ups who handle FIOS internet that this is a major issue that needs to be resolved as soon as possible.
P.S: Please don't tell me to go by my own router because then, I will have to deal with the issues of setting it up to work with Fios TV and the related VOD, widgets, remote DVR compatability issues to deal with. I don't think I can deal with the additional headaches.

FIOS is short for fiber optics. fiber optics is different technology than DSL.
With that said, if you search the Microsoft databases for vista issues with fiber optics, (CURRENTLY THERE IS ONLY ONE PROVIDER OF FIBER TO THE HOUSE, that being Verizon, so yes you can also search Vista issues with verizon and\or fios) and you will find that Microsoft already acknowledges this issue with their software. AND they offer you a fix.
cjacobs001

MSI 975X PROBLEM WITH INSTALLATION ON WINDOWS VISTA

I have MB MSI-975X PLATINUM v.1 withbios ver 1.3,processor Pentium D940 (3,2GHz/800/2x2MB),2X512MB DDR-2 667MHz,in the beginning when I start the installation on WINDOWS VISTA the computer is bloked od it is restart.This problem I solved when I put another processor INTEL 541(3,2GHz/800/1MB) whit this processor everthing is ok,but with INTEL 940 it can not be install WINDOWS VISTA .
I’m asking you for a new superstructure on bios update .

Beta 2 or RC1 candidate???? RC1 should support..........
Beta 2 is real, slow and you have alot of updates to DL, but both are pre-release products and will not work 100%.
Even when Vista is released, they will still be alot of hardware that will not work 100% and this is purely because software is always playing catch up to hardware.
It was only September, when Nvidia released some Beta2/RC1 drivers that worked properly........

Network problems with TC and windows vista

When I try to transfer data from my laptop using Windows vista to the TC, I get an network error message after a few seconds saying the computer is not connected to the network. I have no problems transferring small files (that take less than a few seconds to transfer) and the external router, my laptop and the TC are located close to each other. I tried almost everything but i don't know what the problem is.
Any suggestions?

Hello Bastiaandp. Welcome to the Apple Discussions!
There is quite a bit of dialogue going around the Internet about Windows Vista & Windows 7 when it comes to file sharing with either the Apple AirPorts or Time Capsules. Most of this dialogue seems to be revolving around the version of SMB used by the newer Microsoft OSs and that used by these routers for files sharing.
A number of suggested solutions have been proposed, but none at this time, have provided a "permanent" solution. I too have experienced this same issue and have tried a number of these solutions. What finally worked for me was to make sure that: 1) The Workgroup name used on my Win 7 computer exactly matched the Workgroup name setting on the Disks > File Sharing tab within the AirPort Utility for my base station, & 2) That this name did NOT include any spaces. In my case, I used WORKGROUP for both settings.
Since doing so over six months ago, I have had no problems copying/moving files between my PC and the AirPort, regardless of their size.

Problems with iTunes and Windows Vista

I just got a new dell computer that came with Windows Vista. I'm new to Vista, and just downloaded iTunes. I was able to add my music and it will play, but I can't edit track information. I downloaded iTunes from the administrator account, so I don't know what the problem is or how to fix it. Please help!!

For windows vista, like someone suggested, it may change your permission for editing a file and appear grey screen. As such, the following step might solve this problem.
Go to "Computer", go to your portable hard drive, right click and go to "Properties". Select "Security" Under the "group and user names" choose your user name. To change the permission, choose "Edit" Under permission column, choose "Full Control". After this you may able to edit song information in your itunes.

Problems with USB on Windows Vista - Satelltie A210 (PSAFGE)

Hi!
I just bought myself a new notebook - Toshiba A210 - 15Y (PSAFGE) with Windows Vista preinstalled. The problem is that the notebook doesn't want to work with any USB devices. Whether I try to use a simple USB stick, a mp3 player - he always asks for drivers. The first time I connected my mobile phone via USB it all worked.
When I tried it for the 2nd, 3rd etc. time it doesn't work. He always asks for drivers. Ok, so I installed the drivers for the phone - but the problem wasn't solved by this.
The Card-Reader is another problem - when I tried to use a SD-Card, he again asked for drivers.
Does anybody have an idea how to solve this problem?

Hi,
I'd advise you to reinstall Vista using the recovery cd that came with the laptop. Also, check in the device manager whether all the devices are installed correctly.
Come back if the problem persists, we'll think of something else.

Problems mounting ISOs on Windows Vista SP2

Similar Messages

Maybe you are looking for