Problems moving files from old start-up following upgrade prep :(

So I thought I would do a clean Leopard install ahead of moving up to 10.6...
Bought a new 1TB SATA drive, 10.5 installed and updated, all apps installed, no problems. I did create a new user account rather than migrating - sounds silly but I wanted a completely clean slate as I've been upgrading this system and carrying the user account forward forever...
Now I am trying to copy my DTP files across from the previous boot drive and I don't seem to have permissions over them, even though 'Get info' says I do.
E.g. moving them from folder to folder does a copy rather than a move, and more often than not needs a password.
Any got suggestions for the best practice approach to move files between SATAs, when the two drives have different accounts, etc? I am wary of the ACLs, changing permissions and screwing things up...
Thanks v much

If you can you connect both external drives to the computer at the same time, it would be easier to use the "Consolidate Library" utility in iTunes to move (actually copy) your media to the new drive.
1- Open iTunes preferences and select the Advanced tab. Change the location of your iTunes music folder to a location on your new drive. Also select the options "Keep iTunes music folder organized" and "Copy files to iTunes music folder when adding to library". Close the preferences dialog.
2- On the iTunes menu, select Advanced/Consolidate Library. This will gather all your media and copy it to the new location (the folder you designated in step 1).
3- After the consolidation is complete, verify that your music still plays, and check "Get Info" on some items to verify that iTunes is looking at the new location.
4- Optional. Delete the original files on your external drive. Do this only if you are certain that everything copied over to the new drive.
5- Optional. Close iTunes and locate your "iTunes Library.itl" file. This is typically in your iTunes folder, which may be on your computer's drive and not the external drive. Move this file to somewhere on your new external drive. Next, hold the Shift key as you launch iTunes and you'll be prompted to "Create Library" or "Choose Library". Select "Choose Library" and navigate to where you put the "iTunes Library.itl" file. This is a one-time step that tells iTunes where to boot the library from.

Similar Messages

I am having a problem moving files from a iMac in location mac in another location. I have tried using Dropbox and the Public folder in the i disc. When I drag the files into dropbox they become alias' and I can't open them at the other end beca

I am having a problem moving files from an imac in one location to an imac inanother location. I have tried using Dropbox which is installed in both locations but when i drad a file ino yhe app it becomes an alias. When I get to the other location it says I can't open the file because the " original application that created it is not present". This is despite the fact that the app that created both files is installed in both computers. If I use the Public folder in the idisc, when I get to the other location the file isn't there. Am I forgetting to turn something on or off? Should I manually sync the Public folder and if so how? Thanks
Message was edited by: stephenfromdelray beach

So now that's two of us. Hopefully, someone has an answer.

Problem moving Mail from old to new iMac

I followed instructions about moving Mail--with all mail folders and old emails intact--from my old PowerPC iMac to my new Intel 3.20 MHz iMac. I copied the folder "Mail" inside my user library and the "plist" file from Preferences onto my thumb drive from the old computer, then uploaded these files onto the new one. I was able to easily replace the "plist" file with the onscreen prompt (Do you want to replace?), but the Mail folder went into the Library folder as a duplicate only. So, I tried to delete the original and unused Mail folder, but everytime I sent to the trash and empty the trash, it magically reappears, so that my old emails don't show up when I open the Mail program. I know the files are there--but how do I make my new iMac recognize them and how do I delete the empty Mail folder that was on the new computer originally to avoid confusion? Thanks for any advice you can give.

You may need to rename the copy to be simply Mail. This is best done having first removed any Mail folder on the new Mac, but this should work as well.
Ernie

Moving files from old Mac to new one, via Firewire

I have an old G4, and recently bought a new iMac. I'm trying to transfer the files from my old computer to the new one via firewire (and I've also tried via ethernet cable). The G4 has two hard drives, one with system files, the other just used for data. When I connect the Macs by Firewire, with the G4 in Target mode, the iMac only recognizes the data hard drive. Is there a reason that anybody can think of why the system drive wouldn't show up?

FireWire Target Disk mode only connects to the master ATA drive on the ATA 0 bus; if there's nothing at that location, the computer will shut down instead.
(33779)

Problems moving library from old external drive to new one

I keep all my music on an external hard drive connected to my laptop at home. I am now spending several months away from home, and couldn't take my external drive with me.
I planned to handle this by using iTunes backup feature to put my whole library on DVD, then buy a new external hard drive to take with me, and sse iTunes backup feature to rebuild the library on the new external HDD.
However, I can't get the library to restore/re-load/re-import from the backup DVDs. The iTunes backup/restore instructions tell you to open iTunes then insert the backup DVD. When I do that, I get the following error message:
"The Disc "Backup2007-07-09" cannot be read. An unknown error occurred (-69)."
However, I can read the DVD using just going through My Computer, so I really don't believe it's a problem with the disc.
So, if this backup method isn't working, how can I re-create my library on the new hard drive? I have dozens and dozens of playlists, a lot of them smart playlists that depend on such things as play count, rating, and date added, so i really need to keep all my tags.
I thought of two possible work-arounds.
Plan A: Copy all the music myself (ie, not using iTunes) onto the new external hard drive, using the same filename and path as they had on the old external hard drive, then import the Library.itl file that's on the backup DVD (manually copying over the default one created by iTunes).
Would that work? The big annoyance of this plan, I should add, is that, looking at the files on the backup DVD, i can see that iTunes added a number behind each folder name (ie, "01 Al Green") and behind each album title (ie, "01 Al Green - Greatest Hits"). It seems to me I would have to go through and manually delete all the numerals in both artist and album names in order for the .itl file to point to the right place. That would take hours...
Plan B: (Really not a great plan, but I'm grasping here...)
Give up on the backup altogether. Keep adding music and podcasts to my library as is. All my music that is sitting on my far, far away home HDD will get the exclamation point next to it in iTunes. Then, when i try to sync the ipod, if i'm thinking this through right, iTunes will go ahead and add the new stuff to my ipod, but all the old stuff will just not copy over, and then at the end of syncing i'll get the error message to the effect of "itunes didn't copy song x because the file could not be found." This option is far from ideal, as my playlists won't update, but at least i'll still have the playlists.
Do either of these sound like they would work?
Any other suggestions?
Any help would be very much appreciated.

If you can you connect both external drives to the computer at the same time, it would be easier to use the "Consolidate Library" utility in iTunes to move (actually copy) your media to the new drive.
1- Open iTunes preferences and select the Advanced tab. Change the location of your iTunes music folder to a location on your new drive. Also select the options "Keep iTunes music folder organized" and "Copy files to iTunes music folder when adding to library". Close the preferences dialog.
2- On the iTunes menu, select Advanced/Consolidate Library. This will gather all your media and copy it to the new location (the folder you designated in step 1).
3- After the consolidation is complete, verify that your music still plays, and check "Get Info" on some items to verify that iTunes is looking at the new location.
4- Optional. Delete the original files on your external drive. Do this only if you are certain that everything copied over to the new drive.
5- Optional. Close iTunes and locate your "iTunes Library.itl" file. This is typically in your iTunes folder, which may be on your computer's drive and not the external drive. Move this file to somewhere on your new external drive. Next, hold the Shift key as you launch iTunes and you'll be prompted to "Create Library" or "Choose Library". Select "Choose Library" and navigate to where you put the "iTunes Library.itl" file. This is a one-time step that tells iTunes where to boot the library from.

Problem moving files from USB to Network Drive

I moved my music data from an USB drive to a NAS drive in the network. This also changed the drive letter assigned to the iTunes Music Folder location.
I updated the location in iTunes after moving the files.
But iTunes does not find the files any more.
The file structure is 1:1 and the only thing that changed is the drive letter going from E:\... to L:\...
Any chance to get the references restored? Since I did make edits in the database (such as Genre, BPM, etc) and created many playlists I am wondering what kind of trick I can use or what I did wrong.
Thanks for any advise.
Joe

Hi,
is it possible that the HD was configured as a 'Dynamic Disk' when created in Windows ?
Macs do have problems with these kind of HDs.
See here for informations about Dynamic Disks: http://support.microsoft.com/?scid=kb%3Ben-us%3B308424&x=9&y=12
and this on How-To convert back to Basic Disks (which Macs can use): http://support.microsoft.com/?scid=kb%3Ben-us%3B309044&x=15&y=14
Regards
Stefan

Moving files from old computer to new

I have purchased my daughter a Powerbook 1.3 Ghz and need to move her files, applications, etc., from her old Powerbook 400 mhz to the new one. I have an external firewire drive that will make this easy, I think, but I am concerned about what exactly to move so that her safari bookmarks and her iTunes playlists, preferences, etc., all make the jump.
I'm sure there is a trick to doing this. I just don't know what it is.
Thanks in advance,
Jim

This should help:
Folders You Can Move to Your new Mac
From the Home folder copy the contents of Documents, Movies, Music, Pictures, and Sites.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/com.apple.mail.plist (* This is a very important file which contains all email account settings and general mail preferences.)
/Home/Library/Preferences/ copy any preferences needed for third-party applications
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
For FireFox:
/Home/Library/Applications Support/FireFox
/Home/Library/Preferences/org.mozilla.firefox.plist
Credit goes to another forum user for this information.
If you have DRM protected tunes and/or tunes purchased from the iTunes Store, then be sure you de-authorize the old computer before moving the iTunes library and re-authorizing the new computer after the library has been moved.
About De-authorizing
Moving an iTunes Library

Moving files from old ipod to new ipod

I purchased a new generation 5.5 30g video ipod. How can I transfer all the audio books and photos and music from the old ipod back to itunes and then to the new ipod?
thanks
Photo IPOD Windows XP changing to new ipos

For all other non purchased music (your own CDs etc) try this method which works on some Windows PCs.
Enable your iPod for disk use.
See: iPod Disk Use.
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it can be messy.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music and playlists etc from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
There is also CopyPod. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.
If you copied photos to your iPod using the full resolution option, enable disk use, open your iPod in "my computer", open the photos folder then open the "full resolution" folder and drag the photos out of that folder to your desktop. For enabling disk use look here.
Disk Use.
If you only copied the photos as thumbnails, you can't do this so you'll need a program such as this one.
CopyPod Photo
Photos as thumbnails won't be of the original quality when copied back to your computer.

Getting new Hard Disk. Need help with moving files from old one.

Hey guys so here is my dilema. So I have a Lacie 500GB Hard Drive and made the mistake of accidently deleting all my backups.db into the trash but thankfully never emptied that. There was no way to put it back into the backups folder so it caused me a lot of distress. I have decided to grab a portable hard disk instead such as the Western Digital. Heres my thought. I really only want to transfer a few things from the Lacie such as photos, movies, and a few documents from all the backup dates but nothing else. Is there a way to maybe automate so that certain files will transfer over instead of it all?
Thanks in advance!
On a sidenote, if you have any suggestions for portable, small, lightweight, yet large capacity (at least 1TB) portable hard drives let me know!

Lacie is a Seagate drive
To move specific files, open the backup database (time machine, backups.db). When you open Time Machine and select a date to restore from, you should see a Finder like view of that particular backup. Navigate through the backup the same way as you would through the Finder and choose the folder or files you wish to restore.
iGrom
On a sidenote, if you have any suggestions for portable, small, lightweight, yet large capacity (at least 1TB) portable hard drives let me know!
Dont get the WD, currently theyre having some issues with Mavericks ( https://discussions.apple.com/thread/5475136?start=255&tstart=0 ) and aside from this not the drive most here would recommend.
best options for the price, and high quality HD:
Quality 1TB drives are $50 per TB on 3.5" or $65 per TB on 2.5"
Perfect 1TB for $68
http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
Nice 500gig for $50. ultraslim and perfect
http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
2.5" USB portable High quality BEST FOR THE COST, Toshiba "tiny giant" 2TB drive (have several of them, LOT of storage in a SMALL package) $117
http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48 /ref=sr_1_4?s=electronics&ie=UTF8&qid=1379182740&sr=1-4&keywords=2tb+toshiba
*This one is the BEST portable external HD available that money can buy:
HGST Touro Mobile 1TB USB 3.0 External Hard Drive
$88
http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+72 00+RPM
Most storage experts agree on the Hitachi 2.5"

Moving files from old iMac to new iMac

I am about to buy a new iMac and wish to move all of the data from my old iMac to the new machine. I have backed up data with both Carbon Copy Cloner and with Time Machine. Which of these should I use to move my old data over to the new computer?

Last week I had to do this very thing. Both Macs ran 10.6.2, the old SL Retail; the new had a new 'SL Build.' (10C2234) (Only bought Retail a short while ago and now it cant be used on the 27" .. Duh!)
In the past I have had problems using MA because I did not migrate the User from the old Mac I created a new user before doing so.
In this case I booted the old Mac in Target Mode (on boot hold "T" key down until FW floater seen), connected it to the 27" via FW 800 and booted 27".
I checked migrate the lot. (There are many upgrades to previous basic SW so I didn't want to go through all these upgrades.)
1H49m shortened to 45m or so and all done.
I opened Eudora only to be told Rosetta wasn't installed! No invitation to 'Get IT?' I installed Rosetta from the Retail DVD.
I rebooted and got kernel panics.
I booted from SL (Cloned previously to a FW drive Partition on TM) and got KP's again.
I booted the 27" in Safe Mode (Hold Shift down on boot until spinning gear runs) and set about trashing all 3rd Party stuff in HD>Library>StartupItems Folder.
Stil got KP's when booting normally.
I ran DiskWarrior 4.2 on the 27" from the FW Partition after booting this Vol in Safe Mode, and DW got confused requesting to CD boot ... you cannot boot 2009 (Late) Macs from the 4.2 CD/DVD.
'Phoned Apple and found there was ANOTHER StartupItems Folder ... System>Library>StartupItems.
This had 3 Folders that were put there by Parallels 5 running on my old Mac. Copied (dragged) to DT, deleted from StartupItems, rebooted and no KP. (Thanks Apple Help!)
Trashed the copied Folders as they were of no use.
So far there have been no major problems; Camino quit 4 times, now stable? Snitch needed registering again.
Runs much cooler than the C2D iMac.
HTH

Moving files from old emac to new MacBook Pro

Tomorrow we are supposed to receive our new 15" MacBook Pro w 4gb ram and 320 gb hard drive loaded with iWork. I have an older eMac 720 mh with files stored on it and to Lacie firewire external drives. Someone told me it was easy to move all files (or those I want to move) onto the new wireless MacBook Pro. Does the new computer offer this when you are setting it up or is there software to do this? Do I have to hook them together hardwired or simple connect the new laptop wirelessly to my home network (through my Belkin wireless router). I have an older hpDeskjet 5550 printer connected to my eMac, can I reasonably expect to be able to print through it using the wireless router and home LAN network? Networks and routers are a mistery to me but somehow have managed to install both. My Belkin N+ wireless router has a USB port on the back to facilitate network file storage and sharing has anyone tried this sucessfully?

If your files are backed up to an external drive then connect the drive to the new computer and transfer your files. Here's the basics of what you can transfer:
Folders You Can Move to Your new Mac
From the Home folder copy the contents of Documents, Movies, Music, Pictures, and Sites.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
For FireFox:
/Home/Library/Applications Support/FireFox
/Home/Library/Preferences/org.mozilla.firefox.plist
Credit goes Macjack for this information.

Problems moving distribution from one environment toanother

Hi all,
Problems moving distribution from one environment to another
Initially we have the environment as below:-
Production :-
Server1 : AIX Environment manager (dealing with conductor, web, db)
Server2 : NT Node manager (dealing with outlook)
Development :-
Server3 : NT Environment manager (dealing with conductor, web, db)
Server4 : NT Node manager (dealing with outlook)
Currently, we intended to change the production environment via
changing the Server1 to Server3, as the new environment
manager, while the node manager unchanged.
Things that we've done in Server2, the node manager for
production environment:-
1) Pointing to Server3 instead of Server1, by changing Forte
Control Panel and changing registry entry.
2) Re-deploy the needed libraries in the new environment, so
that it can has the updated version.
3) Re-olegen the vb component.
4) Re-deploy the whole application.
However, we're facing the following problems/error messages
for the newly deployed Forte application:
1) Failed to bind to object named (/wfuseraccessobj/odbso/1)
2) Failed to bind to object named (/wfuseraccessobj/emailso/1)
These errors are actually refer to the libraries that used by
Conductor in order to perform database retrieval, and emailing
functions. These functions were worked properly in the initial
environments.
NOTE: The first error could be okay when refreshing the internet browser
(as our system is a web-based system), somehow it keeps on occurring every
now and then.
Please advice on this matter and reply ASAP as the project
delivery is crucial for our side.
Errors:
ERROR 1:
registering agent anchor /WorkFlow/centrale/lmseng/Agents/EngineUnit_Unit1
Attached to manager for node CHARON.
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: changing engine state
to
ONLINE
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: trying to remove old
shell anchor
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: creating engine object
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: engine object created
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: attaching database
service
23-Nov-1999 17:38:33: EngineShell.SetEngine: Unit1: connected to database
23-Nov-1999 17:38:33: EngineShell.SetEngine: Cold-starting engine... 0
23-Nov-1999 17:38:35: EngineShell.SetEngine: Unit1: registering shell
anchor
23-Nov-1999 17:41:31: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:33: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:34: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:34: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:42:54: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:42:56: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
ERROR 2:
registering agent anchor /WorkFlow/centrale/lmseng/Agents/EngineUnit_Unit1
Attached to manager for node CHARON.
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: changing engine state
to
ONLINE
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: trying to remove old
shell anchor
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: creating engine object
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: engine object created
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: attaching database
service
13-Oct-1999 16:45:43: EngineShell.SetEngine: Unit1: connected to database
13-Oct-1999 16:45:43: EngineShell.SetEngine: Cold-starting engine... 0
13-Oct-1999 16:45:47: EngineShell.SetEngine: Unit1: registering shell
anchor
13-Oct-1999 16:49:58: Build: Exception raised of type ActivityException and
severity 3: A TOOL execution exception caught in ReadyAction().
13-Oct-1999 16:49:58: Build: Exception raised of type ActivityException and
severity 3: Exception in activity TempReview (4) will cause an abort of
process LMSPD (10).
SYSTEM ERROR: Exception in activity TempReview (4) will cause an abort of
process LMSPD (10).
Class: ErrorException
Error #: [2, 122]
Detected at: OfferedActivity.Activity.AbortProcessInException()
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
SYSTEM ERROR: A TOOL execution exception caught in ReadyAction().
Class: ErrorException
Error #: [2, 107]
Detected at: OfferedActivity.ReadyAction
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
SYSTEM ERROR: The attribute firstReviewerID is not available in this
accessor.
Class: qqsp_UsageException with ReasonCode: SP_ER_PARAMETERERROR
Error #: [15, 1206]
Detected at: AttributeAccessor.AttributeAccessor.Find()
Last TOOL statement: method TempReview.OnReady
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
Begin Stack Backtrace
==========================================================
Trace caused by a segmentation or access violation in the Forte executable:
Application: WFEngineUnit_cl1
Platform: PC / NT
Partition: WFEngineUnit_cl1_Part1
Generated: 02-Jun-1998 19:10:20
By: ftexec Version 3.0.G.2
Fault at 13-Oct-1999 16:49:58, pid '2441', node 'CHARON':
User Name: SYSTEM
Machine Name: CHARON with 2 CPU(s)
OS version 4.0
Loading symbols for ...
d:\forte\install\bin\QQCT.dll
d:\forte\install\bin\QQSH.dll
d:\forte\userapp\wfengine\cl1\wfengi1.exe
d:\forte\install\bin\QQKN.dll
d:\forte\install\bin\QQSM.dll
d:\forte\install\bin\QQDO.dll
d:\forte\install\bin\QQCM.dll
d:\forte\install\bin\QQRT.dll
d:\forte\userapp\ofcustom\cl0\libofcus.dll
d:\forte\install\bin\QQHD.dll
d:\forte\install\bin\QQDB.dll
d:\forte\install\bin\QQDS.dll
d:\forte\install\bin\QQDD.dll
d:\forte\userapp\wfcustom\cl0\libwfcus.dll
d:\forte\userapp\wfenvdef\cl1\libwfenv.dll
d:\forte\install\bin\QQEM.dll
d:\forte\install\bin\QQFO.dll
d:\forte\install\bin\qqtlnt.dll
d:\forte\install\bin\w3tpwss.dll
C:\WINNT\System32\rpcltc1.dll
C:\WINNT\System32\comctl32.ocx
d:\forte\install\bin\QQRP.dll
C:\WINNT\System32\OLEPRO32.DLL
C:\WINNT\System32\WINSPOOL.DRV
C:\WINNT\System32\MFC40.DLL
C:\WINNT\system32\OLEAUT32.dll
C:\WINNT\System32\rnr20.dll
C:\WINNT\System32\IMM32.dll
C:\WINNT\system32\msafd.dll
C:\WINNT\System32\wshtcpip.dll
C:\WINNT\System32\WS2HELP.dll
C:\WINNT\System32\WS2_32.dll
C:\WINNT\System32\WSOCK32.dll
C:\WINNT\System32\MSVCRT40.dll
C:\WINNT\system32\COMCTL32.dll
C:\WINNT\system32\ole32.dll
C:\WINNT\system32\SHELL32.dll
C:\WINNT\system32\comdlg32.dll
C:\WINNT\system32\ADVAPI32.dll
C:\WINNT\system32\RPCRT4.dll
C:\WINNT\system32\USER32.dll
C:\WINNT\system32\GDI32.dll
C:\WINNT\system32\KERNEL32.dll
C:\WINNT\System32\ntdll.dll
C:\WINNT\system32\MSVCRT.dll
C:\WINNT\System32\MSVCIRT.dll
Stack backtrace ...
wfengi1 004edd89 (017bb4f0,019e85e0,046bfe34,016a0c08)
wfengi1 004e29d1 (017bb4f0,019f1fc0,00000000,00f039d0)
wfengi1 004e2ecb (017bb4f0,00000024,019e85e0,019f1f98)
wfengi1 004e4503 (017bb4f0,019e85e0,01a20025,01a22868)
QQKN 005dc66f (017bb4f0,019e85e0,019f0025,01a22848)
QQKN 005df7a5 (017bb4f0,019e85e0,01a22890,01a22848)
QQKN 00697109 (017bb4f0,00000000,00f039d0,00f039d0)
QQSH 0027c47b (017bb4f0,0161b9d8,00000000,017bb4f0)
QQKN 0067f24f (01619c14,017bb4f0,f34a8eb8,046bffb8)
QQKN 0067e2d5 (01619c14,00000000,00000000,00f039d0)
MSVCRT 780099ed (00f039d0,00000000,00000000,00f039d0)
KERNEL32 77f04f2c (78009990,00f039d0,00000000,00905a4d)
QQCT 00000000 (00000000,00000000,00000000,00000000)
End of Stack Backtrace
=========================================================
13-Oct-1999 16:50:10: Build: Exception raised of type TimerException and
severity 3: Exception in timer OneWorkingDayTimer (3) will cause an abort
of
process LMSPD (10).
SYSTEM ERROR: Exception in timer OneWorkingDayTimer (3) will cause an abort
of process LMSPD (10).
Class: ErrorException
Error #: [8, 111]
Detected at: ElapsedTimer.PTimer.FinishExpiration()
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
FATAL ERROR: System segmentation/access violation caught.
Class: qqos_SystemException
Error #: [101, 321]
Detected at: qqos_MainExFilter at 1
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
ERROR: qqlo_LomTaskInitiator::Run: Asynchronous task exiting:
The following error was not on the error stack:
FATAL ERROR: System segmentation/access violation caught.
Class: qqos_SystemException
Error #: [101, 321]
Detected at: qqos_MainExFilter at 1
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
ERROR: TMgr.Terminate: fatal error terminated partition

Lori,
Yes. I organize all my film rolls by name. If I import new pictures that don't fit into an existing film roll name I create a new film roll with a name appropriate to the theme of the new pictures. No problem with this.
However, if I import pictures at a later date that I want to move to an existing film roll, there is a problem if scrolling is required to bring the existing film roll into view in the display pane.
For example, I have a film roll called "Flowers & Plants". I later import a roll that contains some pictures that I want to move to the Flowers & Plants roll. The Flowers & Plants roll is not visible in the display pane so scrolling is necessary. I select and drag the new pictures up (the new film roll is always at the bottom of the display pane) to reveal the Flowers & Plants film roll. However, the film rolls scroll by so fast it is virtually impossible to stop on the Flowers & Plants roll's title bar.
This was not a problem with earlier versions of iPhoto on slower Macs. I really appreciate the much improved iPhoto/Mac performance but I wish there were some way to control this aspect.
I hope this helps.
Thanks.
Mike

Could someone suggest a procedure describing how I should migrate my iTunes files from old an older Motorola-based PowerMac to a new Intel-based Mac Pro?

My problem concerns migrating, or moving my iTunes files from a Motorola-based G4 PowerMac OS X 10.4.11 iTunes 9.2.1 (4) to a new Intel-based Mac Pro running OS X 10.8.4 iTunes 11.0.4.
Context Summary:
1. Migration assistants on my old and new macs are not compatible.
2. My older mac has my iTunes library stored on an external firewire disk.
3. Part (but not all) of my iTunes files are also resident/stored on my iPod classic.
4. Finally, I need OS X 10.4.11 on my old mac and cannot upgrade it to OS X10.5.
Proposed method A: Is there a way to transfer my playlists from my Motorola Mac to my Intel Mac? If so, could I then connect my external firewire disk (containing my iTunes library) to my new mac, and then tell iTunes (on new mac) to use my iTunes library located on my external firewire disk?
Proposed method B: Would my chances for success improve if I used my iPod classic to transfer iTunes files from old Mac to new?
Worst Case Proposal C: I could start from scratch and recreate iTunes playlists and library on new mac.... time consuming proposal but it's possible. (Please don't suggest this proposal unless no other viable choices exist for me.)
Or have I missed something? Is there another procedure I should use?
Please advise, and thank you.

Hello Chris,
Answer to your iTunes library question: By iTunes Library, I mean my iTunes Media folder only; not the entire /iTunes/folder with iTunes media folder inside.
BTW: Your pointer to ht4889 was very helpful, and sharing the folder, then copying it over firewire interface from old to new mac was most useful.
However, now with my entire iTunes folder (including iTunes media folder) moved to new mac, I remain unclear as to how I should configure iTunes on the new mac so that it can know about and use these copied files. I understand using iTunes preferences, how to point iTunes to my media folder, but don't know what other iTunes operations are necessary for iTunes to pick up where I left off with my old mac.
Is there any file conversion necessary?
Or inside iTunes, should I:
File->Library->Organize Library? or
File->Library->Export Library? or
File->Library->Import Playlist?
Please advise and thank you again for your help.
As you might imagine, I put a great deal of time building my iTunes library, and would feel very blue if I need to build it again from scratch on my new mac.
So long for now.

Using Migration Assistant to move files from old PC laptop to new MacBook Pro that has Windows 8 installed containing Outlook

When using Migration Assistant to move files from old PC laptop to new MacBook Pro, that has Windows 8 installed containing Outlook, will emails, contacts and calendar entries be moved to Outlook on the new MacBook or into Mail, Contacts and Calendar?

I doubt they will. But then I'm not sure as I used a migration program once about 18 years ago and totally FUBARed the system I had at that time and I've never used one again.
For me the reason to have a new system is to start fresh. Installing only program that I now use and manually copying data over from the older system.
Not sure your older version of Outlook, and the outlook mail boxes, are compatible with Office/Outlook for Mac 2011.
A better place to ask this question would be on the MS Office for Mac forums.
Hope it all works out for you.

HT201177 How Do I Remove Files From My Start-Up Disk?

Can someone tell me how to remove files from my start up disk?

Your startup volume is full. First, reboot. That will temporarily free up some space. According to Apple documentation, you need at least 9 GB free for normal operation. You also need enough space left over to allow for growth of your data.
Use a tool such as OmniDiskSweeper to explore your volume and find out what's taking up the space.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To really see everything, you have to run it as root.
First, back up all data if you haven't already done so. No matter what happens, you should be able to restore your system to the state it was in at the time of that backup.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
After installing ODS in the Applications folder, drag or copy — do not type — the following line into the Terminal window, then press return:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
I don't recommend that you make a habit of this. Don't delete anything while running ODS as root. When you're done with it, quit it and also quit Terminal.

Problems moving files from old start-up following upgrade prep :(

Similar Messages

Maybe you are looking for