Problems moving from one server to another

Hi all.
So I have 2 servers, maya and maya2. On both I have installed Sun Java Messaging server 2005Q4. After that I've set up an rsync between maya and maya2 (folders /opt/ and /var/opt) and everything is working fine, maya2 is a good backup server.
Of course maya's hdd broke down and I switched to maya2. I have also replaced maya2's ip with the one from maya and all seemed to work fine but... I can't login to delegate administrator (it sais "Invalid login ID or password, please try again") and the amconsole doesn't work ("Authentication Service is not initialized. Contact your system administrator.").
Everything else is working so I don't think this is from LDAP.
Could you please help me to solve this up? In what logs should I look?
If I reinstall all from scratch on caesar and copy all but the amconsole folder will it work?
Thanks

I have no way to tell what broke in your setup.
Your setup is unsupportable.
replicating this way may well break several things.
Deletaged Admin may have stuff outside the paths you chose to replicate. You may be able to reinstall it.
I doubt you need reinstall Messaging or Directory.

Similar Messages

Moving from one server to another.

This may be a little long winded but I am at my wits end and hopefully someone can steer me in the right direction. I am in the process of updating the server at my job. Currently the server is on an old G3 running OS X Server 10.2.8, and everything runs great. So now I put OS X Server 10.2.8 on and Quicksilver G4 867 MHz machine, created the workgroup, users, etc. Everything is working fine on the new server, except for one PC, a Dell XPS 210. When I enter the username and password to logon, the computer appends my username with the name of the computer, ex. Hal becomes HalsPC/Hal as the username. Because of this I can't access the server files. Now this computer connected fine to the server on the old Mac, and if I unplug the Ethernet from the new server and connect to the old server it still works fine. Can anyone offer a reason why the Dell would react this way, I don't have this problem with any of the other PC's in the office.
Thanks in advance to anyone who can offer any assistance.
-Hal

Hi Hal
Everything is working fine on
the new server, except for one PC, a Dell XPS 210.
When I enter the username and password to logon, the
computer appends my username with the name of the
computer, ex. Hal becomes HalsPC/Hal as the
username. Because of this I can't access the server
files. Now this computer connected fine to the server
on the old Mac, and if I unplug the Ethernet from the
new server and connect to the old server it still
works fine. Can anyone offer a reason why the Dell
would react this way, I don't have this problem with
any of the other PC's in the office.
Firstly have you made sure you have started Windows Services on your Server? Secondly on your PC (is it XP?) use Windows Explorer to browse for your Server, select Search, select Computers or People and in the field, key in the IP address of your Server. Windows Explorer should show you an icon view of the OSX server in the right hand window. Double click on this and key in a valid user and password as created on the Server. If you enable guest access for Windows Users they wont require authentication and should be able to access share points with no problem.
Hope this helps

Move Web service from one server to another

Hi
        i am calling a web service from R3 which i have moved from one server to another what i need to do in my web dynpro application as it will call the web service from new location?
do i need to rebuild the whole application or need to change some settings here and there?
NOTE: webservice and function module of the web service is not changed just moved from one server to another.
THANKS
Ninad

Hi,
Try with this code. Dynamically Server will get change.
Create a HTTP Destination in visual administrator which stores the server name and port.
String prefixURL = "http://";
// your Service Address...remove the first part from service url.
String serviceURL = "/TestService/Config1?style=document";
DestinationService dstService = (DestinationService) obj;
Destination destination = dstService.getDestination("HTTP","ApplicationServer");
Properties destprop = destination.getDestinationProperties();
HTTPDestination httpDestination = (HTTPDestination) destination;
String serverName = httpDestination.getUrl();
prefixURL = prefixURL + serverName;
String testURL = prefixURL + serviceURL;
Request<Obj> testReq = new Request<Obj>();
testReq._setEndPoint(testURL);
You need to import below files into your project.
import com.sap.security.core.server.destinations.api.Destination;
import com.sap.security.core.server.destinations.api.DestinationService;
import com.sap.security.core.server.destinations.api.HTTPDestination;
import java.net.HttpURLConnection;
import java.util.Properties;

Moving services from one server to another

Hi all,
I moved Access Database Services and Excel Services from one app server to another app server by starting those services on the new server and stopping them on the old one. However, in the app logs and ULS, SharePoint errors out cuz it still tries to make
the calls to the old server. Why is this? I did the iisreset on the old server, but it made no difference. What am I missing?

Hi ,
According to your description, my understanding is that you got an error when you moved Access Services and Excel Services from one server to another server.
As Trevor said, please do an IISRESET on the new server, and compare the result.
Please restart the new server running Access Services and Excel Services applications. If restarting the server does not correct the problem, confirm that the hardware of the server is functioning correctly, or reinstall Access Services Application
and re-add the server to the server farm.
Here are some similar posts for you to take a look at:
http://technet.microsoft.com/en-us/library/ee513104(v=office.14).aspx
http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010setup.aspx?ID=dc48676c-43f6-45f9-ab46-2ed6515c9660
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Moving a Company from one server to another server

Dear All,
I have gone through all the SBO SDN Threads (related to SBO-Common) to know the role of SBO-Common data base in SAP B1, but the following case is still not clear to me. Please help.
Suppose I have two SBO servers (of same settings) as follows u2013
Server1:
Database                Company
SBO-Common          N/A
SAP_Abc_Co          Abc Co.
Server2:
Datebase               Company
SBO-Common          N/A
SAP_Xyz_Co          Xyz Co.
Now I want to transfer the above said Xyz Co (database-SAP_Xyz_Co) from Server2 to the Server1 (keeping all other companies in Sever1 intact). How to do it?

SBO-Common, also acts as the license server.
To transfer a company from one server to another you can do like Steffen said.
You don't need to backup SBO-Common.
Dan Souza - EasyOne Consulting
[www.easyone.com.br|http://www.easyone.com.br/]

Moving Files from one server to another

How i can move different files / Oracle reports from one server to another...
secondly , if i want to access Oracle Discoverer reports from new server , either i need to install Discoverer on it or not...If yes how i can install & configur it?

Need guide lines to transfer Oracle reports from one server to another ....Need help...Working on Unix environment....
Forward me commnads to move data...please

Moving users from one server to another using Shared Services

How do you migrate users and groups from one server to another from Hyperion Shared Services in version 9.3.1?
When users were provisioned from EAS on version 7.x we could use Migration Utility but now since users are provisioned using Shared Services, what is the approach to be followed?

Someone will probably give you a real-world example of how to do it, but to get you started you may want to review the Hyperion Security Administration guide, section "Migrating Native Directory" which discusses that you need to first install the Import/Export Utility on your Shared Services server, then create an export file, then go to your target Shared Services Server and long story short, import it.
-Karen

Moving SharePoint from One server to another

Hi,
We are in the process of migrating our current sharepoint farm server to another server.
Our scenario
WFE Servers = SERVER01 AND SERVER02
APP Servers   = SERVER03 AND SERVER04
SQL Server   = SERVER05
New WFE Servers = SERVER06 AND SERVER07
New APP Servers = SERVER08 AND SERVER09
New SQL Server = SERVER10
Please does anyone know the best approach for migrating a sharepoint farm from one server to another.
My current approach will be to
FOR THE SQL SERVER
1.    stop all processes that might be using sharepoint such as search, sptimer using the net stop cmdlet on SERVER05
2.    back up all sharepoint content databases
3     Copy and restore the backed up databases on the sql server using the same name to ensure permissions are not      tampered with on SERVER10
4.    Ensure the firewall on the new sql server is open on port 1433
5.    Configure a new SQL Alias on the new server so that SharePoint can point to the new sql server
6.   Restart all the stopped processes in 1 above.
However, my questions are
Is the above the right approach?
How do i migrate the WFE and APP servers - do i need to reconfigure sharepoint on both wfe nd app server and then do a mount-spcontentdatabase cmdlet?
Please advise is urgently needed
Kind Regards
Louis
thanks

Hi Louis,
check those sites for details
http://www.akspug.org/Blog/Post/20/Migrating-from-one-SharePoint-2010-farm-to-another-SharePoint-2010-farm
https://conradjonesit.wordpress.com/2013/07/13/migrate-sharepoint-2010-content-to-new-farm-part-1-install-sql-instance/
https://conradjonesit.wordpress.com/2013/07/13/migrate-sharepoint-content-databases-2010-to-a-new-farm-part-2-install-sharepoint/
https://conradjonesit.wordpress.com/2013/07/13/migrate-sharepoint-content-databases-to-a-new-farm-part-3-move-content-database/
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

Moving user files from one server to another.

Hi everyone
I would need your help to help me migrate the user files of around 300 persons to a new server.
Is there a tool that could help me doing that?
Here is the situation:
I have an old 2003 server with all the user accounts. We are using the shares to manage rights.
We want to migrate all these accounts to a 2008 R2 server using NTFS rights.
So:
is there a tool that could:
- copy the files and put NTFS right automatically with the username (%username%) as owner for each user personal folder.
- change the path of the personal folder in each account in AD to the new server.
- Make them automatically members of a specific group (We use that group to exclude these users from the old login script that would've map to old server instead.)
is there anyone who could help me with this issue?
Thank you very much!
Dag

Hi Dag,
You can use robocopy to copy user files NTFS permissions from one server to another server and use /COPY:O to copy the owner information.
For robocopy command, I would like to suggest you refer to the below article:
http://technet.microsoft.com/en-us/library/cc733145(v=ws.10).aspx
Robocopy will not help copy Share permissions but only NTFS permissions. So if the drive letter will not be changed, you can backup and restore the Share permission with steps here:
http://support.microsoft.com/kb/125996
Then you can refer to the article below to change the path of the personal folder in each account in AD:
Change a user's home directory
http://technet.microsoft.com/en-us/library/cc732253.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Moving directory with Software Update files from one server to another

Hi guys,
I have recently bought a Mac Mini to move on it my test system Mac OS 10.9 with Server 3.0, running on VM.
My question is:
Is it possible to move the Software Update packages/directory from one server to another, so I don't need to wait a whole week to have them all downloaded from the Apple servers?
I assume, if replace all the Software update fodder it is not going to work as there are some kind of index files elsewhere that will not accept that change.
I haven’t tried any migration assistant as don’t want to replicate the server.
Any suggestions, please?

hi Lucas,
i just stumbled onto this post of yours while searching for solutions for a somehow related issue that's kept me thinking.
your post isn't new, yet it received no answers... maybe you found a solution already.
in case you haven't, a possible hint might come from https://discussions.apple.com/message/20478878#20478878
for the record, i've installed os x server 3.0 on mvrx 10.9 on a 4-year old Intel Core 2 Duo mac mini with 500GB disks.
in my case, it's the almost 200GB of update files wasting what's left of my storage real estate to press for a solution.
tried to do what's suggested here, seems to work fine on my system, too. hope this helps.

Copying report file from one server to another requires refresh database?

Hi,
I am using Crystal Reports 11 for development.
We have a number of crystal reports that are served on a web server running classic ASP that uses these reports with Embedded Crystal Server XI installed on the server.
When I am developing or modifying a .rpt file (report) I connect to a UAT/development database on a dedicated development server.
When I am happy with the report and testing is successful I copy and paste the report onto the production server, replacing the old report.
The problem is I don't have a user account and password on the production server. Our DBAs are the only one with passwords on the prod servers. If an application needs a password entered they come to my desk and enter it for me.
The problem is in order for the modified report to work on the production, I have to call up a DBA to "verify the database" for me by connecting to production server and entering username and password.
This is really annoying.
Why can't I just disconnect\log off server in crystal reports, then copy and paste the .rpt file to prod server and be done with it?
If I had dozens of reports to change, it seems very rigid that I have to ask a DBA to enter the user account and password used by the application to run the report.
Can someone please explain how to be able to copy and paste modified reports/ or new reports from one server to another without having this problem.
Thanks
Haggisns

Moving to the Legacy SDK forum.
Crystal can be magical sometimes but if you don't tell CR where the database is how is it to know you moved it?
As you have seen and for security reasons you can't simply "drop" a report on any server and expect it to just connect to a new DB server without being asked to enter in credentials or that you have changed the DB server to report off of.... If it's too much work for the DBA to set log on info then he should give you access to so can.
Thank you
Don

DATAGRID FOCUS ISSUE: Focus got lost, while moving from one cell to another cell using tab key.

Problem: Focus got lost, while moving from one cell to another cell using tab key.
Example: In an AdvanceDataGrid, there are three columns having custom ItemRenderer with Spark TextInput control (editable=true & focusEnabled=true).
When I try to move the focus in with in 2nd, 3rd & 4th column using tab key, focus got lost. Most of the time it’s working, but some time it doesn’t work. There’s no clue as to how may rows/columns the focus has jumped to; or whether the focus has gone out of the data grid altogether.
Observations: I am not sure whether this problem is because of custom component implementation or it is because of some issue related to Flex Component.
It only occurs when we perform some actions like some server call, some complex logic execution etc. at the focus out event of itemrenderer.
There is one property of datagrid i.e. editedItemPosition which contains row & column index of datagrid. On the focus out event, it gets null when focus got lost. We tried to set it, but it didn’t work.
Steps Performed:-
1. Currently focus is in 2nd column i.e. Apply to #.
2. Once I press tab key from 2nd column, it goes to 3rd column which is correct.
3. Now if I press tab key from 2nd column i.e. Payment #, focus should go to 3rd column, but it goes out of data grid and set the focus of button which is outside data grid.

http://search.java.sun.com/search/java/index.jsp?qp=&nh=10&qt=%2Bjtable+%2Btab+%2B%22enter+key%22&col=javaforums

Move VM from one server to another using Local Repositories

There is the following structure:
ovhost-01 with first_repo
ovhost-02 with second_repo
Oracle VM version: 3.1.1
Both first_repo and second_repo are Local Repositories.
On ovhost-01 I have VM named "TestOVM" with status Stopped .
Task:
Move VM from ovhost-01 to ovhost-02 using "Clone or Move" section from VM Manager ( http://docs.oracle.com/cd/E27300_01/E27309/html/vmusg-vm-manage.html#vmusg-vm-move )
Whenever I try VM moving virtual disk stays on the first_repo.
With shared NFS-storage this feature working well.
Question:
Is it possible to move VM from one server to another with Local Repositories ?

Neither ovhost-01 nor ovhost-02 have access to each other. It move or copy... the admin server that is connected to the local repository would have to have access to the target repository.

Process for migrating CMSDK from one server to another

All:
We are in the process of migrating our CMSDK installation and database from one server to another. In doing so, we would like to retain our documents and folders and other custom objects that have been created till date. If there is a recommended migration process that you could point us to, it would be greatly appreciated.
Our initial thought is to:
1. Install the CMSDK server on the target server machine
2. Export source CMSDK schema from source database server
3. Import source CMSDK schema into target database server
Are we on the right track? If so, are there any pitfalls and issues we can expect to encounter. Any information will be very helpful.
Thanks

The utility should help you a lot. The best documentation on how to use the utility is in the 9iFS Setup and Administrators guide (doc number A95995-01) Chapter 8. It pretty much works the same way then as it does now. These are two metalink notes on doing the export/import silently (29928.1 - 177816.1). Doing it silently is very tedious since you having to create numerous .def files and other scripts to run them.
I will look around for any other stuff I have, but the 9iFS document is very good as a reference no matter what version of CMSDK. If you have problems finding it, I can try to send it to you, but it is around 5.6M.

Solman project transport from one server to another

Hi All,
i have a small query , regarding project management . I have a Template project with some manually designed tamplate inside that. and test case created.
Now i want to move this project with all config. , selected template and test case from one server my another solman server.
I am hoping transport icon given below in solar_project_admin will work for me . please confirm me and let me know if other options too available . can i use solar_migration for this activity ??
please suggest all possible way for export (transport) this project from one server to another.
Thanks
gyanP

Unfortunately, transaction SOLAR_MIGRATION is not released to be used in the Solution Manager 4.0/7.0 and therefore is not supported.
See also the PDF-document: 'SAP Solution Manager - Content Transfer'
which can be found at:
http://service.sap.com/solutionmanager
-> Media Library
-> Technical Papers
Besides the "Transport Project" functionality in SOLAR_PROJECT_ADMIN for projects and the transport of testpalns from transaction STWB_2 there is no other function available/supported at the moment.
you have to make sure that you have in the source system the corrections from the notes:
for Projects:
1147186 Unreleased documents are not transported
1119462 Problems transporting projects
1134578 Document types missing when transporting projects
For Testplans/testpackages:
1224283 Test plan incomplete after transport
1246383 Transport connection for test documents in test plan

Problems moving from one server to another

Similar Messages

Maybe you are looking for