Problems on installation SQL Server Express
I have problems installation of SQL server express.
Here is the error message:
TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
'.', hexadecimal value 0x00, is an invalid character. Line 1, position 52351.
Error code 0x84B10001.
Have a look at this link.
http://stackoverflow.com/questions/21643363/error-0x84b10001-when-installing-sql-server-2012-on-a-machine-with-vs2013
==
Well, turns out that this cryptic error is due to an older
instance of SQL Server Desktop Engine (MSDE) being present.
After uninstalling MSDE, the SQL Server 2012 setup worked without errors.
==
Satheesh
My Blog | How to ask questions in technical forum
Similar Messages
-
SQL Server Express 2012 SP2 installation hangs during extract phase
Greetings!
I am having an issue with trying to silent install SQL Server Express 2012 SP2 (x86).
I have a proprietary installation framework, which is calling the SQL Server Express installer.
The SQL Server Express installer starts extracting files to c:\{some guid}. The folder reaches about 11 mb in size, and then nothing further happens. No activity on the machine, CPU or disk - I have waited up to 15 minutes to verify this. On the normal installation,
the size of this folder is ~650 mb.
Here are the things I've also tested:
- I'm experiencing these symptoms on both Windows 7 and Windows Server 2012 R2 (haven't tested other platforms)
- If I launch exactly the same command from the command prompt, the installation goes through as normal
- If I replace the SQL Server Express 2012 SP2 with SQL Server Express 2012 SP1, and install via our installation framework, the installation goes through as normal
- I have checked and double-checked that our installation framework is started with administrative privileges.
- From my previous search attempts, I have seen issues where the installer would hang or fail when launched from inside an msi, which would result in a log in C:\Program Files (x86)\Microsoft SQL Server\<something something>. These are not the symptoms
I am experiencing. The C:\Program Files (x86)\Microsoft SQL Server\ folder is not even created!
Any suggestions, or places I can look to figure out why it's not proceeding? For now, I have worked around the issue by including SP1 instead of SP2, but ideally I'd like to base my solution on the most recent service pack.Hello Alberto!
The installation framework does check for this. I'm also certain that these prerequisites are fulfilled.
When the SQL Server process hangs, I can kill the process, copy/paste the exact command that was executed from the installation framework's log files, and execute that command in a command prompt - and then the installation runs as expected.
The installation framework installs SQL Server Express correctly if I use the 2008 R2 SP1 express or the 2012 SP1 Express installer. It's just the SP2 installer that is giving me problems.
The only difference I can think of is that the installation framework is a 32-bit process, which calls the SQL Server installer, while the command prompt is a 64-bit application. I am installing the SQLEXPR_x86_ENU.exe
from http://www.microsoft.com/en-us/download/details.aspx?id=43351, so it should be compatible with my 32 bit environment -
"SQLEXPR_x86 is the same product but supports installation onto both 32-bit and 64-bit (WoW) operating systems"
Tomorrow, I will try:
- Installing on Windows 7 32-bit
- Trying to launch the SQL Server installer from a powershell (x86) prompt, to emulate a 32-bit environment on a 64-bit machine -
SQL Server Express intermittent installation issue
Have been seeing this error for several months trying to duplicate and troubleshoot. SQL Server 2008 R2 SP2 Express being installed on Windows 7 (x86 or x64) Professional, various processors, various execution environments (VM and non-VM). Yesterday duplicated
on x86 Win7 Pro VM clean install (installed Win7 Pro, loaded all updates except .NET 4.5, and installed my application). App installer copies .NET 4, Visual Studio 2010 C++ run-time, and then SQL Server 2008 R2 SP2. Below is portion of detail.txt from
setup failure log:
2014-07-12 18:22:17 Slp: ----------------------------------------------------------------------
2014-07-12 18:22:17 Slp: Running Action: SqlEngineDBStartConfigAction_install_configrc_Cpu32
2014-07-12 18:22:17 Slp: Action Data:
2014-07-12 18:22:17 Slp: Feature = SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu32
2014-07-12 18:22:17 Slp: Scenario = install
2014-07-12 18:22:17 Slp: Timing = ConfigRC
2014-07-12 18:22:17 Slp: ConfigObjectType = Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig
2014-07-12 18:22:17 Slp: FeatureName = SQL_Engine_Core_Inst
2014-07-12 18:22:17 Slp: FeatureCpuType = Cpu32
2014-07-12 18:22:17 Slp: FeaturePackageId = sql_engine_core_inst
2014-07-12 18:22:17 Slp: SlipstreamInstall = 1
2014-07-12 18:22:17 SQLEngine: --SqlEngineDBStartConfig: Install: SqlEngineDBStartConfig Configuration
2014-07-12 18:22:17 SQLEngine: : Action Scenario: Install, Feature Scenario: Install, Resolved Scenario Install
2014-07-12 18:22:17 Slp: Sco: Attempting to get network service account name
2014-07-12 18:22:17 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2014-07-12 18:22:17 Slp: Sco: Attempting to get account from sid S-1-5-20
2014-07-12 18:22:17 Slp: Sco: Attempting to get network service account name
2014-07-12 18:22:17 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2014-07-12 18:22:17 Slp: Sco: Attempting to get account from sid S-1-5-20
2014-07-12 18:22:17 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2014-07-12 18:22:17 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2014-07-12 18:22:17 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.ActiveNode =
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.IsActiveNodeUpgraded = False
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.Version =
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.IsDefaultInstance = False
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.InstanceId = MSSQL10_50.SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.ReferenceInstanceId = MSSQL10_50.SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.InstanceName = SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.SqlServerServiceName = MSSQL$SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --ProductProperties: Retrieving product properties from local node.
2014-07-12 18:22:17 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-07-12 18:22:17 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
2014-07-12 18:22:17 Slp: Sco: Attempting to get registry value ProductCode
2014-07-12 18:22:17 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-07-12 18:22:17 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
2014-07-12 18:22:17 Slp: Sco: Attempting to get registry value Language
2014-07-12 18:22:17 SQLEngine: --GroupProperties: Loading group properties from local machine.
2014-07-12 18:22:17 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-07-12 18:22:17 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
2014-07-12 18:22:17 Slp: Sco: Attempting to get registry value SQLGroup
2014-07-12 18:22:17 Slp: Sco: Attempting to get account from sid S-1-5-21-3076291671-3154185214-3698330068-1005
2014-07-12 18:22:17 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-07-12 18:22:17 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
2014-07-12 18:22:17 Slp: Sco: Attempting to get registry value SQLPath
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: Dumping Effective Properties for new instance.
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: InstanceId = MSSQL10_50.SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: InstanceName = SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: IsDefaultInstance = False
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: SqlServerServiceName = MSSQL$SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: IsExpressSku = True
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: IsWorkgroupSku = False
2014-07-12 18:22:17 SQLEngine: --InstallProperties: Dumping Install Properties
2014-07-12 18:22:17 SQLEngine: --InstallProperties: EnableRanu = True
2014-07-12 18:22:17 SQLEngine: --InstallProperties: SecurityMode =
2014-07-12 18:22:17 SQLEngine: --InstallProperties: LoginMode = 1
2014-07-12 18:22:17 SQLEngine: --InstallProperties: SqlCollation = SQL_Latin1_General_CP1_CI_AS
2014-07-12 18:22:17 SQLEngine: --InstallProperties: SqlAdminAcounts =
2014-07-12 18:22:17 SQLEngine: --InstallProperties: SqlServiceStartupType = Automatic
2014-07-12 18:22:17 SQLEngine: --InstallProperties: SqlAccount = NT AUTHORITY\NETWORK SERVICE
2014-07-12 18:22:17 SQLEngine: --InstallProperties: SqlDomainGroup =
2014-07-12 18:22:17 SQLEngine: --InstallProperties: AddCurrentUserAsSQLAdmin = True
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: Dumping Registry Properties
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: SqlServiceRelativeRegPath = System\CurrentControlSet\Services\MSSQL$SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: CompleteInstanceRegPathByName = SOFTWARE\Microsoft\Microsoft SQL Server\SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: CompleteInstanceRegPathById = SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: ReferenceInstanceRegPathById = SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: MSSQLServerInstanceRegPath = SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQLServer
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: ReferenceMSSQLServerInstanceRegPath = SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQLServer
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: SetupInstanceRegPath = SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: ReferenceSetupInstanceRegPath = SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
2014-07-12 18:22:17 SQLEngine: --ProductProperties: Dumping Product Properties
2014-07-12 18:22:17 SQLEngine: --ProductProperties: ProductCode = b5153233-9aee-4cd4-9d2c-4faac870dbe2
2014-07-12 18:22:17 SQLEngine: --ProductProperties: LCID = 1033
2014-07-12 18:22:17 SQLEngine: --GroupProperties: Dumping Group Properties
2014-07-12 18:22:17 SQLEngine: --GroupProperties: SqlEngineGroupSid = S-1-5-21-3076291671-3154185214-3698330068-1005
2014-07-12 18:22:17 SQLEngine: --GroupProperties: SqlEngineGroupNameFromSid = WIN-EAD5VG4PBDE\SQLServerMSSQLUser$WIN-EAD5VG4PBDE$SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --GroupProperties: SqlEngineGroupNameFromSidNoDomain = SQLServerMSSQLUser$WIN-EAD5VG4PBDE$SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: Dumping Directory Propreties
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: DataRootDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: SystemDataDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: InstallSqlInstanceDir = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: DefaultDataDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: DefaultLogDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: BackupDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Backup
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: TempDbDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: TempDbLogDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: ErrorLogDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: TemplateDataDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Template Data
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: SqlInstanceBinnDir = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Binn
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: SqlInstanceTemplatesDir = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Binn\Templates
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: MasterDbPath =
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: MasterLogPath =
2014-07-12 18:22:17 SQLEngine: --SqlEngineDBStartConfig: ConfigRC : SqlEngineDBStartConfig Configuration
2014-07-12 18:22:18 Slp: Sco: Attempting to set directory full path
2014-07-12 18:22:18 Slp: Sco: Attempting to normalize directory path c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:18 Slp: Sco: Attempting to set directory full path
2014-07-12 18:22:18 Slp: Sco: Attempting to normalize directory path c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:18 Slp: Sco: Attempting to set directory full path
2014-07-12 18:22:18 Slp: Sco: Attempting to normalize directory path c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:18 SQLEngine: --SqlServerStartup: SQLEngine: Slipstream case: Enable traceflag -T902
2014-07-12 18:22:18 SQLEngine: : Checking Engine checkpoint 'StartEngineService'
2014-07-12 18:22:18 SQLEngine: --SqlServerServiceSCM: Starting SQL via SCM (-mSqlSetup -f -Q -qSQL_Latin1_General_CP1_CI_AS -T4022 -T4010 -T3659 -T3610 -T902 -dc:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Template Data\master.mdf -lc:\Program
Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Template Data\mastlog.ldf)...
2014-07-12 18:22:18 Slp: Sco: Attempting to start service MSSQL$SQLEXPRESS
2014-07-12 18:22:20 Slp: Sco: Service MSSQL$SQLEXPRESS started
2014-07-12 18:22:20 Slp: Sco: Attempting to get service process id for service MSSQL$SQLEXPRESS
2014-07-12 18:22:20 Slp: Invoking QueryServiceStatusEx Win32 API
2014-07-12 18:22:20 Slp: Sco: Returning service process id 3480
2014-07-12 18:22:20 SQLEngine: : Checking Engine checkpoint 'GetSqlServerProcessHandle'
2014-07-12 18:22:22 SQLEngine: --SqlServerServiceSCM: Waiting for nt event 'Global\sqlserverRecComplete$SQLEXPRESS' to be created
2014-07-12 18:22:24 SQLEngine: --SqlServerServiceSCM: Waiting for nt event 'Global\sqlserverRecComplete$SQLEXPRESS' or sql process handle to be signaled
2014-07-12 18:22:24 SQLEngine: : Checking Engine checkpoint 'WaitSqlServerStartEvents'
2014-07-12 18:22:59 Slp: Sco: Attempting to initialize script
2014-07-12 18:23:01 Slp: Sco: Attempting to initialize default connection string
2014-07-12 18:23:03 Slp: Sco: Attempting to set script connection protocol to NotSpecified
2014-07-12 18:23:03 Slp: Sco: Attempting to set script connection protocol to NamedPipes
2014-07-12 18:23:03 SQLEngine: --SqlDatabaseServiceConfig: Connection String: Data Source=\\.\pipe\SQLLocal\SQLEXPRESS;Initial Catalog=master;Integrated Security=True;Pooling=False;Network Library=dbnmpntw;Application Name=SqlSetup
2014-07-12 18:23:03 SQLEngine: : Checking Engine checkpoint 'ServiceConfigConnect'
2014-07-12 18:23:03 SQLEngine: --SqlDatabaseServiceConfig: Connecting to SQL....
2014-07-12 18:23:03 Slp: Sco: Attempting to connect script
2014-07-12 18:23:04 Slp: Connection string: Data Source=\\.\pipe\SQLLocal\SQLEXPRESS;Initial Catalog=master;Integrated Security=True;Pooling=False;Network Library=dbnmpntw;Application Name=SqlSetup
2014-07-12 18:24:16 Slp: Sco: Connection error code from SqlException is : -2
2014-07-12 18:24:30 Slp: Watson Bucket 1
Original Parameter Values
2014-07-12 18:24:30 Slp: Parameter 0 : SQL Server 2008
R2@RTM@
2014-07-12 18:24:30 Slp: Parameter 2 : System.Data.SqlClient.SqlInternalConnection.OnError
2014-07-12 18:24:30 Slp: Parameter 3 :
Microsoft.SqlServer.Configuration.Sco.ScoException@1211@1
2014-07-12 18:24:30 Slp: Parameter 4 :
System.Data.SqlClient.SqlException@-2146232060
2014-07-12 18:24:30 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc
2014-07-12 18:24:30 Slp:
Final Parameter Values
2014-07-12 18:24:30 Slp: Parameter 0 : SQL Server 2008
R2@RTM@
2014-07-12 18:24:30 Slp: Parameter 2 : 0x1BBF2F31
2014-07-12 18:24:30 Slp: Parameter 3 : 0x0A2FBD17@1211@1
2014-07-12 18:24:30 Slp: Parameter 4 : 0x3906094D
2014-07-12 18:24:30 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc
2014-07-12 18:24:36 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2014-07-12 18:24:36 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2014-07-12 18:24:36 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2014-07-12 18:25:26 Slp: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
2014-07-12 18:25:32 Slp: Watson bucket for exception based failure has been created
2014-07-12 18:25:32 SQLEngine: Copying 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' to 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt' ...
2014-07-12 18:25:32 Slp: Sco: Attempting to set file full path to 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG'
2014-07-12 18:25:32 Slp: Sco: Attempting to normalize directory path 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG'
2014-07-12 18:25:32 Slp: Sco: Attempting to check if file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' exists
2014-07-12 18:25:32 Slp: Sco: Attempting to copy file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' to file 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to check if file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' exists
2014-07-12 18:25:32 Slp: Sco: Attempting to normalize directory path 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to set file full path to 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to normalize directory path 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to check if directory path 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' is equal to path 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to check if directory path 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' is equal to path 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to normalize directory path 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG'
2014-07-12 18:25:32 Slp: Sco: Attempting to normalize directory path 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to get security descriptor for file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG'
2014-07-12 18:25:32 Slp: Sco: Attempting to check if file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' exists
2014-07-12 18:25:32 Slp: Sco: Returning security descriptor O:NSG:NSD:AI(A;ID;FA;;;NS)(A;ID;FA;;;SY)(A;ID;FA;;;BA)(A;ID;FA;;;S-1-5-21-3076291671-3154185214-3698330068-1005)(A;ID;0x1201ff;;;S-1-5-21-3076291671-3154185214-3698330068-1006)
2014-07-12 18:25:32 Slp: Sco: Attempting to dispose script
Please note that this is NOT a question about fixing this one installation. This is an SQL Server Express install as part of my application install and MUST WORK FIRST TIME, EVERY TIME. Please direct me.
Paul T.Here are the parameters used with the SQL Server Express installer EXE (both x86 and x64):
/q /hideconsole /action=Install /features=SQL /instancename=SQLEXPRESS /enableranu=1 /sqlsvcaccount="NT Authority\Network Service" /AddCurrentUserAsSqlAdmin /skiprules=RebootRequiredCheck /IAcceptSQLServerLicenseTerms
I presume that TCP/IP is not enabled by default for Express installs. I THINK that named pipe should be enabled.
Summary.txt is copied below:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068119551
Exit facility code: 1211
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-07-12 18:06:14
End time: 2014-07-12 18:25:44
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.4000.0%26EvtType%3d0x1BBF2F31%400x3906094D
Machine Properties:
Machine name: WIN-EAD5VG4PBDE
Machine processor count: 1
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: c:\b610200f3dc88995d16c2effd8b6ac\x86\setup\
Installation edition: EXPRESS
Slipstream: True
SP Level 2
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: c:\b610200f3dc88995d16c2effd8b6ac\PCUSOURCE
PID: *****
QUIET: True
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Authority\Network Service
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0x0A2FBD17@1211@1
Configuration error description: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\Detail.txt
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0x0A2FBD17@1211@1
Configuration error description: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\Detail.txt
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SystemConfigurationCheck_Report.htmd
The entire contents of the installation log can be found in ZIP format here:
https://onedrive.live.com/redir?resid=8E983C44B610198D!3984&authkey=!AFbuZaCG3Lm38Pw&ithint=folder%2c.zip
Paul T. -
HELP - SQL Server Express Install Problems
The SQL Server Express completed without error. However, when I tried to connect to the SQLEXPRESS instance I received one of those wonderful MS errors, "Specified file not found". WHAT FILE? (After all these years MS still can't figure out how
to give an error msg. that provides some hint of what's wrong.) Going on, I started the install console and selected the REPAIR option. (It didn't ask what the problem was, it just ran.) It did ask what instance needed repair. I told
it SQLSERVER. It proceeded to repairing it. My first hint that their repair function worked as well as their error handling was when I got the: That share name has already been used (or something like that) error (notice, MS didn't tell me what
share name, or what aspect of the db they were talking about). After pressing OK, the REPAIR function proceeded to run to completion. When I reviewed the REPAIR report I found that three db processes all had the same SHARE NAME ALREADY USED error.
Actually, I thought that it was no big deal. If this was a real REPAIR, it shouldn't matter that the name was already used because everything else should be the same. (I know I'm nigh eve about the
Intricacies of SQL server.) After repairing my installation, I brought up the SQL Server Management Console again. This time, it did not display SQLEXPRESS in the Connect field. I selected the drop down list arrow to see if it was
listed and the list was blank so I entered SQLEXPRESS in the connect field and clicked on the CONNECT button. I got a NETWORK PATH NOT FOUND error. So, before I really mess things up, I thought I should ask if anyone knows what I should do
next. (As an aside, I've pressed the MS Error Message HELP button numerous times abut various errors I've received over the years. Not only are MS error messages useless, their Help Page has never ONCE been able to provide any information
about the encountered error. MS should spend some time and develop some truly helpful error messages as "File not found" and unknown error code 837289 are absolutely useless and especially since their HELP PAGE is never able to provide any
information either. I do wonder how I can get Unknown Error codes from people who wrote the code that raises the error. Don't they document anything?)I did read the requirements and made sure I met them all. The install package I used was: SQLEXPRADV_x64_ENU.exe. You're correct. I'm not familiar with SQL Server.
I downloaded SQL Server Express and Visual Studio Express to learn and explore because I wanted to learn about the new technology.
After leaving my message, I did some more studying and playing with the system. I managed to figure out that I had to turn on the data base service before I could connect with it. I'm sorry, I don't understand how Microsoft could install a data
base system without turning on its services. Why would I want to install something and NOT use it? The default should be ON and the setup manager should provide a choice to set it to OFF on the configuration page.
My experience is rather dated. I had to retire due to a disability in 2005. I couldn't control my arms and hands. The doctor recently tried a medication again that I had had a severe negative reaction to. He first administered steroids
and started me on a small dose and titrated it up as I was able to handle it. Now I have some days where I have pretty good control — I can print a little but can't write well and other days where I can't print, write, or feed myself.
I have performed many functions. I have been an analyst, a programmer, a data base designer, and a college professor at three different colleges. I've done extensive work in process automation and have even automated the management functions
for a data base system that was used to schedule every aspect of all the aircraft, ranges, and weapons development processes on Eglin AFB. I also wrote major pieces of the code used by the system and trouble shot and corrected functions written by other
programmers. The system supported over 300 users a day on two bases. Unfortunately it was developed in Fortran on a VAX and with VB6 and MS Access using VBA, Queries, Tables and Forms on networked PCs.
I plan to do a lot of reading. I'll also be looking at the Microsoft sites for a sample DB and lessons to go with it. I am a little frustrated with how information is organized on the web. The other night I needed to find some information
about something from Microsoft. It took me almost two hours to ask my question in such a way that MS was able to provide what I wanted. I kept asking essentially the same thing, but I had to use the exact phrase MS used on the page. I know
MS is big and they support multiple generations of each product. They have an almost impossible task. I just have to find the various product entry pages.
Thanks for offering your help. -
Problem with Datasource for SQL Server Express
I have set up a development environment to develop some processes for the HCSO client and have a question. I have a turnkey install on my laptop with MYSQL. The liveCycle databases are in MYSQL. I have also installed SQL Server Express on this machine and created a table to query that will control workflow. I added a datasource configuration in the adobe-ds.xml configuration file. That configuration is:
<local-tx-datasource>
<jndi-name>HCSO</jndi-name>
<connection-url>jdbc:sqlserver://localhost:1433;DatabaseName=DBName</connection-url>
<driver-class>com.microsoft.sqlserver.jdbc.SQLServerDriver</driver-class>
<user-name>username</user-name>
<password>password</password>
<min-pool-size>1</min-pool-size>
<max-pool-size>30</max-pool-size>
<blocking-timeout-millis>60000</blocking-timeout-millis>
<autoReconnect>true</autoReconnect>
<idle-timeout-minutes>15</idle-timeout-minutes>
<prepared-statement-cache-size>100</prepared-statement-cache-size>
<transaction-isolation>TRANSACTION_READ_COMMITTED</transaction-isolation>
<new-connection-sql>Select id from HCSOUser.eric</new-connection-sql>
<check-valid-connection-sql>Select id from HCSOUser.eric</check-valid-connection-sql>
<metadata>
<type-mapping>MS SQLSERVER2000</type-mapping>
</metadata>
</local-tx-datasource>
In SQL Server, I created a user and a schema with the same name in a database. I created a simple table called "eric" with one column called "id". The user was given the appropriate default schema and given full permissions on the database and table.
In workbench, I added a JDBC query single row activity. I have configured the datasource as java:/HCSO and also tried java:HCSO. I then entered the query as "Select id from HCSOUser.eric" and hit test. Nothing appears in the results area. I see the following in the server.log:
2009-09-24 14:44:26,437 ERROR [org.jboss.ejb.plugins.LogInterceptor] RuntimeException in method: public abstract java.lang.Object com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterLocal.doBMT(com.ad obe.idp.dsc.transaction.TransactionCallback) throws com.adobe.idp.dsc.DSCException:
java.lang.RuntimeException: A result set was generated for update.
at com.adobe.idp.dsc.jdbc.JDBCService.testExecute(JDBCService.java:616)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doBMT(EjbTran sactionBMTAdapterBean.java:197)
at sun.reflect.GeneratedMethodAccessor573.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at org.jboss.invocation.Invocation.performCall(Invocation.java:345)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:214)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:149)
at org.jboss.webservice.server.ServiceEndpointInterceptor.invoke(ServiceEndpointInterceptor. java:54)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:48)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:106)
at org.jboss.ejb.plugins.AbstractTxInterceptorBMT.invokeNext(AbstractTxInterceptorBMT.java:1 58)
at org.jboss.ejb.plugins.TxInterceptorBMT.invoke(TxInterceptorBMT.java:62)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:154)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:153)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:192)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:122)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:624)
at org.jboss.ejb.Container.invoke(Container.java:873)
at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:415)
at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:88)
at $Proxy270.doBMT(Unknown Source)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:95)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:132)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:115)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:118)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.invoke(AbstractMessageReceiv er.java:315)
at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invokeCall(SoapSdkEndpoint. java:138)
at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invoke(SoapSdkEndpoint.java :81)
at sun.reflect.GeneratedMethodAccessor710.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397)
at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:186)
at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at com.adobe.idp.dsc.provider.impl.soap.axis.InvocationFilter.doFilter(InvocationFilter.java :43)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:39)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.ja va:159)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:59)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11P rotocol.java:744)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112)
at java.lang.Thread.run(Thread.java:595)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: A result set was generated for update.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement$StatementExecutionRequest.executeStatemen t(Unknown Source)
at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeUpdate(Unknown Source)
at org.jboss.resource.adapter.jdbc.WrappedStatement.executeUpdate(WrappedStatement.java:161)
at com.adobe.idp.dsc.jdbc.helper.SqlHelper.executeTestUpdate(SqlHelper.java:117)
at com.adobe.idp.dsc.jdbc.JDBCService.testExecute(JDBCService.java:610)
... 82 moreThanks fot the tip, but now I got a different message in the "Test" results of "Query Single Row":
Exception: Could not create connection; - nested throwable: (com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect); - nested throwable: (org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect))
My datasource xml is like this:
<?xml version="1.0" encoding="UTF-8"?>
<datasources>
<local-tx-datasource>
<jndi-name>MSSQL</jndi-name>
<connection-url>jdbc:sqlserver://localhost:1433;DatabaseName=ADOBE</connection-url>
<use-java-context>false</use-java-context>
<driver-class>com.microsoft.sqlserver.jdbc.SQLServerDriver</driver-class>
<user-name>sa</user-name>
<password>adobe</password>
<min-pool-size>10</min-pool-size>
<max-pool-size>50</max-pool-size>
<blocking-timeout-millis>60000</blocking-timeout-millis>
<idle-timeout-minutes>15</idle-timeout-minutes>
<prepared-statement-cache-size>100</prepared-statement-cache-size>
<transaction-isolation>TRANSACTION_READ_COMMITTED</transaction-isolation>
<check-valid-connection-sql>SELECT 1 FROM sysobjects</check-valid-connection-sql>
<metadata>
<type-mapping>MS SQLSERVER2005</type-mapping>
</metadata>
</local-tx-datasource>
</datasources>
Where is the problem and how to fix it?
Thank you. -
SQL Server Express 2008 Installation error. PLEASE HELP.
Hey guys anyone know what I should do to install SQL Server Express 2008?
Im running Vista Home Premium SP1 32bit
These are folders i got on framework folder:
* v3.5
* v3.0
* v2.0.50727
* v1.1.4322
* v1.0.3705
Installing SQL Server 2008 Express (run time only)
And this is the error I get during the process
"Attributes do not match. Present Attributes (Directory, Compressed), included attributes (0), excluded attributes (Archive, Compressed, Encrypted)."
I have downloaded and installed all Visual Studio 2008 SP1 Express Ed (C++, C#, VB, WebDev) and all worked well
I get this error during the "Feature Selection" setup process.
I also noticed when I tried to use Windows Update, I saw Microsoft SQL Server 2008 Service Pack 1 (KB968369) suddenly available (I have updated windows and installed all important updates before installing Microsoft Visual Studio and SQL). Then I used Windows Update to install SQL Server 2008 SP1 and I still got this error:
Error
Code 84B40000 Unknown error....
I also get this downloading error on SQL Server while installing all 4 Visual Studio Express Editions (C#, C++, VB, WebDev).
"The following cannot be downloaded:"
I've already tried the troubleshooting guide about BITS but the tool fix seems to only supports Windows XP Operating Systems.
Please please please Help Me (^_^).. thanks to all.
P.S.
I think this might have some connections to why I get errors on a simple 'Hello World' Website.
I was just trying to simply make a 'Hello World' Website .. Just THAT on my website.
A simple Website for me to start. Just showing those text on the website. But when I tried to run (debug) the program. This error shows...
'Firefox can't establish a connection to the server at localhost:5903.'
I have Build the Web Site and there was no error. Since it was just simply 'Hello World' text.
Im sure there's some problem but I'm completely stuck here. I dunno if its connected to the problem above.
Please help me solve this problem. Thank you so much.
I appreciate everyone's help.In my case I had to uncheck "Allow files in this folder to have contents indexed in addition to file properties"
Right click on C:\Program Files\Microsoft SQL Server
Click Advanced on General Tab
Uncheck "Allow files in this folder to have contents indexed in addition to file properties" -
SQL Server Express 2014 Installation Completes with Failures and Repair Does Nothing to Help
I am attempting to install SQL Server Express 2014 on a development machine and as usual old versions of SQL and the remnants of them are a plague to the installation.
I have used to Revo Uninstaller to scrub the old installations and with my first attempt after some additional work on the registry I was able to get an instance to install and remarkably I was able to connect to the instance. However, I removed an application
reference to SQL Server 2008 after the SQL Express 2014 installation (through Control Panel > Programs > Programs and Features) and it stopped working immediately.
So I removed (uninstalled using Revo Uninstaller) every reference to any SQL Server application as well as removed all of the registry references (using Revo) and I can now install SQL Server Express 2014 with
"Feature" failures [Reporting Services, Database Engine Services, Full-Text and Semantic Extractions for Search and SQL
Server Replication] and of course it doesn't work.
Now when I attempt "Repair" the installation the process ends normally (no errors) and reports "Success" however SQL still has no instance and the services are not running nor are they visible when I open the "SQL Server Configuration
Manager".
This is the "Repair" log:
Overall summary:
Final result: Passed
Exit code (Decimal): 0
Start time: 2014-12-21 17:21:37
End time: 2014-12-21 17:29:10
Requested action: Repair
Machine Properties:
Machine name: EDWARD-PC2
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered Configured
SQL Server 2014 Management Tools - Basic 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 Management Tools - Complete 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 Client Tools Connectivity 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 Client Tools Backwards Compatibility 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 Client Tools SDK 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 LocalDB 1033 Express Edition 12.0.2000.8 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Edward\Downloads\SQLEXPRADV_x86_ENU\x86\setup\
Installation edition:
User Input Settings:
ACTION: Repair
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASCONFIGDIR: Config
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
ENU: true
FAILOVERCLUSTERGROUP: <empty>
FAILOVERCLUSTERNETWORKNAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
QUIET: false
QUIETSIMPLE: false
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
UIMODE: AutoAdvance
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141221_172135\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141221_172135\SystemConfigurationCheck_Report.htm
However this is what the "SQL Sever Configuration Manager" look like:
Why does this appear to not be working properly? I can not connect the the "local" instance and I would guess that the service either does not exist or is not running.
Edward WalkerHello,
To my knowledge, Revo is not a supported way to uninstall SQL Server.
Please try to uninstall all you can using Control Panel -> Programs and Features, then perform a manual uninstall to
remove remnants. Try the following procedure:
1. Uninstall all SQL Server 2012 components you can using Control Panel -> Programs and Features
2. Backup the registry.
3. Delete the following keys in regedit:
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing
SQL Server.
5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
6. Rename all the SQL Server folders in the computer like C:\Program Files\Microsoft SQL Server and subfolders.
After performing above procedure, try to reinstall SQL Server again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Windows Installer - SQL Server 2008 Express Errors
I am working with an application that was developed for an XP machine. One of my peers took the old Windows application and using Visual Studio 2010 upgraded the application to work on a Windows 7 machine. We are creating the installer (.exe
and .msi) files within Microsoft Visual Studio 2010, but we are having different issues on different machines that we try to run the setup.exe file on.
On our company computers with Windows 7, the setup.exe file runs and works properly.
On our customers computer with Windows 7, received the following error: "an error occurred attempting to install SQL Server 2008 Express Service Pack 1."
On non-company/non-customer machines, we tried two Windows 7 machines. One machine had no issues and everything installed perfectly and the other received this error: "Component SQL Server 2008 Express has failed to install."
User pressed Yes to reboot the computer.
After the reboot, the setup.exe file was run and there were no more errors. The application was installed properly.
Within the Installer we have four boxes checked under Properties - Prerequisites:
Microsoft .NET Framework 4 (x86 and x64)
Microsoft .NET Framework 4 Client Profile (x86 and x64)
SQL Server 2008 Express
Windows Installer 3.1
If anyone can help with why the installer is causing issues on some computers and not on others as well as why the issues by computer are different that would be very helpful!
Thank you!Hi,
Please refer to this article for troubleshooting installation of
SQL Server Express:
http://social.technet.microsoft.com/wiki/contents/articles/1146.sql-server-express-troubleshoot-installation.aspx
Check Summary.txt in the <SQLInstallFolder>\100\Setup Bootstrap\Log and see if you need to apply the Hotfix in the
KB 957453.
Thanks.
Tracy Cai
TechNet Community Support -
Connection problem in Crystal Reports for Eclipse(SQL Server Express 2008)
I tried to connect into a local SQL Server Express 2008 database in Crystal Reports for Eclipse (CR4E), but always got the Ping failed message(TCP/IP connection failed) even I tests completed successfully using my Window XP Adminstrators Tools (SQL Server ODBC Data Source Test). I can connect successfully to a remote network Oracle database in CR4E. I would like to know
that is there any one who connect SQL Server Express 2008 local database successfully in CR4E?Don,
Thanks for your suggestions. I will follow your instruction to connect to SQL Server Express 2008 database latelly. I can connect successfully with different Oracle databases (10g) in CR4E. I will try to connect MySQL database and Postgres database in CR4E to see if they can be successful or not. My project involves international entities with emphsizing in using OPEN SOURCE softwares (which means FREE - no license fees) in .NET platform for Oracle, SQL Server Express, MySQL and Postgres database servers. I am responsible for reports generation. I hope that CR4E can be connected successfully to SQL Server Express 2008 database server, otherwise I have to use JFreeReport/JFreeChart tools to do reports generation . -
Error Installing SQL Server Express 2008: '' is not a valid login or you do not have permission.
I have tried installing SQL Server 2008 multiple times on my machine, and I always receive this error about 3/4 of the way through: '' is not a valid login or you do not have permission.
I have tried installing both SQL Server Express 2008 with Tools and SQL Server Express 2008 with Advanced Services, and they both fail the same way. I am trying to do a new stand-alone installation.
I'm running Windows XP Home Edition SP3.
Looking into the error, some forums say I have to install it from THE Administrator account, and not an account with administrator permissions; it also cannot be in Safe Mode, because then the Windows Installer won't work. Unfortunately, I haven't been able to login to the Administrator account. I can go to the home login screen, do ctrl+alt+del twice, and attempt to login to the Administrator account, but I receive this error: Unable to Log You on because of an Account Restriction.
Other forums say that in the Server Configuration section, all you have to do is provide the username and a strong password from an administrative account on the computer, and it doesn't have to be THE Administrator. Well, I did that, but for some reason it doesn't recognize my username and password, it says something like "The credentials you provided for the SQL Server Agent are invalid". BUT THOSE ARE THE CORRECT CREDENTIALS FOR MY ADMINISTRATIVE USER! So I'm forced to use one of the accounts without a password, like NT AUTHORITY\SYSTEM. That's the only way I can get past this step.
Also, just FYI, on the next step, which is Database Engine Configuration, I am using Mixed Mode for the Security Mode. I AGAIN provide a password, and then add my current user (who IS an administrator on my machine!) to the SQL Server Administrators box.
But yet, it fails every single time.
This is pathetic and ridiculous. I must have tried to install this thing 15 times, that is not an exaggeration. I'm posting this on several other forums as well, maybe an MVP or Bill Gates himself can help me.
I have one of the log files from a failed installation. If someone would like to see it, I will post it.Papy Normand wrote:
Hello,
Please, could you have a look on the excellent answer of Mike Wachal you will find here :
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=4160294&SiteID=1
Don't hesitate to post again for more help or explanations
Have a nice day
PS : if you are talking about the Sql Server Agent Service, it is disabled for Sql Server Express. It is enabled only for the Workgroup/Standard/Dev and Entreprise Editions
Sorry, but I've tried the suggestion in that link, and it hasn't helped me.
For anyone wonder, the link is talking about the problem in Server Configuration where I enter my Windows user account and password (which is in the Administrative group), but it says the credentials are invalid. The link suggests that you need to either enter your Windows account (which I did, and it wouldn't let me go to the next step), or to use one of the built in accounts (which I also tried, but it gave me the " '' is not a valid login" error during the installation).
Any other ideas?
I haven't had any answers from any other forums either, so I'll just post my log file in case anyone wants to look at this:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2008-11-17 11:13:47
End time: 2008-11-17 12:17:25
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0xBE029E38%400x12C2466D
Machine Properties:
Machine name: STEVEN
Machine processor count: 2
OS version: Windows XP
OS service pack: Service Pack 3
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: D:\x86\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: NT AUTHORITY\SYSTEM
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: STEVEN\Steven
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\ConfigurationFile.ini
ENABLERANU: False
ERRORREPORTING: False
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\SYSTEM
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: D:\
NPENABLED: 0
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\SYSTEM
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: STEVEN\Steven
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature: Analysis Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature: Integration Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\SystemConfigurationCheck_Report.htm -
SQL Server Express is being a real pain
I've been messing with this SQL Server Express installation
since Friday and still can't get this application and database to
work together correctly. The program is written in ColdFusion, but
the errors seem to be permissions related to me but I just can't
figure it out.
I've created a user within SQL Server Management Express
program and all goes well. I then assign it as database owner for
the particular database I'm using. I've created the datasource from
within the ColdFusion administrator and it says the connection is
being made.
When trying to access the script, I get the error below.
In the SQL Management system I have tried everything that I
know to do - from adding this particular account as a user for the
"tUsers" table and giving it "Select" permissions to re-creating
the account and making it owner of the entire database. I tried
adding the schema to the front and surrounding the table name in
brackets [ ].
The database was restored from a backup on another server.
Would that cause problems at all? I just tried deleting the
database, creating it again, then restoring it from the file and
setting the owner as this user during the import process. I'm still
not having any luck though.
I've searched Google and almost every result is a forums post
from people having this same problem who have fixed it by giving
the account permission to access the database and/or table. For
some reason that isn't working for me - or I'm an idiot and missing
something.
Does anyone have any ideas?At first, no, I couldn't perform any queries at all against
the database.
I fixed the problem by editing the "server" in the CF admin
for this datasource and making it:
localhost/SQLEXPRESS
CF Admin says it doesn't verify, but if I attach the username
and password to each CFQUERY statement they work!
Very strange problem. I'm not sure if this is a 'feature' or
a known bug, but I don't see any reason why that connection doesn't
verify. Especially since if it would've I could have saved myself
countless hours of work.
Oh well - thanks everyone for your suggestions and
help! -
SQL Server Express 2008 and WOW64
Our software requires SQL Server Express 2008 to be installed on various computers. We have run into a problem with systems that have WOW64. When the SQL installer is going through it's check list, it marks the WOW64 as the reason that it cannot continue. In other cases I get a notification that tells me that windows installer 4.5 or higher is required but when I try to install windows installer 4.5 it tells me that the it is not the correct verson of windows installer for the system. I try a few different versions and get the same problem. I am confused as to why one windows software would not work with another.
Hi,
- Which version of Windows installer 4.5 are you trying to install ? For X86, X64 or IA64 ?
- Which version of your operation system ? Windows 2003 ? 2008 ? 2008 R2 ? .....
For information
Download the file that is appropriate for your operating system version and platform.
For Windows Vista, Windows Vista Service Pack 1 and Windows Server 2008:
x86 Platform: Windows6.0-KB942288-v2-x86.msu
x64 Platform: Windows6.0-KB942288-v2-x64.msu
IA64 Platform: Windows6.0-KB942288-v2-ia64.msu
For Windows XP Service Pack 2 and Windows XP Service Pack 3 (32-bit platforms):
x86 Platform: WindowsXP-KB942288-v3-x86.exe
For Windows Server 2003 Service Pack 1, Windows Server 2003 Service Pack 2 and Windows XP 64-bit Editions:
x86 Platform: WindowsServer2003-KB942288-v4-x86.exe
x64 Platform: WindowsServer2003-KB942288-v4-x64.exe
IA64 Platform: WindowsServer2003-KB942288-v4-ia64.exe
Extract of the documentation :
Windows Installer 5.0 will be released with, and require Windows Server 2008 R2 or Windows 7. Versions earlier than Windows Installer 5.0 were released with Windows Server 2008, Windows Vista, Windows Server 2003, Windows XP, and Windows 2000.
Windows Installer 4.5 requires Windows Server 2008, Windows Vista, Windows XP with Service Pack 2 (SP2) and later, and Windows Server 2003 with Service Pack 1 (SP1) and later.
Cheers,
Michel.
Michel DEGREMONT , my blog SQL Server -
SQL Server Express hosting and EULA
Hi, I have a (possibly stupid) question. I want to use SQL Server Express for hosting. It is for a small project and on a dedicated server, so I don't think there would be any problems with the limitation of express edition.
However, I have run into one formal problem:
If I look at the the SQL 2014 Express_Hosting_Redistribution_EULA (found at http://www.microsoft.com/en-us/download/details.aspx?id=29693), it has section 2b. which permits hosting. But in the license terms that are in the installation, this section i missing,
so the "You may not use the software for commercial software hosting services" rule would apply.
Why is that? Is there another version of SQL Server Express that allows hosting? If so, where can I find it?
ThanksHi,
You can use Express edition for Hosting, its allowed and EULA is correct. Just because it is missing in License terms "does not means it is not allowed".
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
Good morning,
I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
Installation goes plain until around the end of the progress bar, it stops on the setup of
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
I've put in my SkyDrive the error log I received after the install;
I'm at full disposal if you need further information,
thank you in advance
Best regards
FrancescoWell, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above:
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
Then, I just got my account added as Local Admin and then tried to start the service and was able to.
However, I am not sure whether same was the case for you.
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana -
What MS SQL Server Express version should I install?
Hi, I'm planning to use MS SQL Express for my LabVIEW app under Windows 7.
There are 3 versions available on the MS site: 2005, 2008, 2012. My first choice is on the latest, however I wonder if there may be any reason to choose an earlier version.
Also I wonder if the installation could conflict some way with the SQL Server Express 2005 the DSC module uses.
Sorry for my rather dumb questions but I'm not very strong on the relational databases subject.
Thanks a lot for any comment.
Paolo
LV 7.0, 7.1, 8.0.1, 2011Ranjeet...
I am using SQLServer Express 2012 with TestStand 2012 and having no luck getting TestStand to log to the catalog that I have created based off of the standard NI SQL scheme.
When creating the tables using the build sql file I found that...
I ran ito issues with the 'constraint' SQL commands TestStand was using:
CONSTRAINT STEP_RESULT_FK FOREIGN KEY (UUT_RESULT) REFERENCES (ID))
this must actually be:
CONSTRAINT STEP_RESULT_FK FOREIGN KEY (UUT_RESULT) REFERENCES UUT_RESULT (ID))
Note.... the 'UUT_RESULT' infront of (ID), without this the statement fails.
I had to correct all the constraint commands in order to get the tables built.
Now when I try to use the catalog to log data using TestStand I get...
An error occurred calling 'LogResults' in 'ITSDBLog' of 'zNI TestStand Database Logging'
An error occurred executing a statement.
Schema: SQL Server Stored Proc (NI)
Statement: UUT_RESULT.
Description: Could not find stored procedure 'InsertUUTResult'.
Number: -2147217900
NativeError: 2812
SQLState: 42000
Reported by: Microsoft OLE DB Provider for SQL Server
Source: TSDBLog
The procedure is present so I am confused.
FYI... I am currently using TestStand in eval mode as I am waiting on delivery, could the eval mode be the issue???
Any help would be greatly appreciated. I have done this before with TestStand 3.5 and SQL Server 2008 with no problems so I am confused why it not working now.
Pete
Maybe you are looking for
-
AppleCare for iPhone 3G / Advance replacement service UK
Having had a good look around the UK online store, it seems as though the Applecare for iPhone is currently unavailable or has been deleted. Is anyone aware of what has become of it, whether it might return or will an alternative me made available ot
-
How to track costing in Production order
Hello Everyone I would like to get some details about how to set the product costs for Finished Goods and also how to track the expenses like packaging, labor, electricity, other charges etc, for individual production order. I have created the labor
-
Switching from PC to Mac - Iphone issues
Hi....jus got myself a macbook 2.4ghz model....I got an iphone 3g which i used with a windows laptop... I've copied all my songs into a portable disk drive and plan to move that to the mac.....once i upload the songs into itunes....and connect my iph
-
How to avoid submitting form twice
How to avoid submitting form twice when this form use spry validation.
-
Loving Motion, but is there the facility to re-touch images - almost like Photoshop can? I assume not? I don't want to have to export individual frames to Photoshop from FCP to re-touch - so instead I'm using the rather clumsy method of drawing shape