Problems on start up with Snow Leopard after T-mobile mobile broadband inst

Hi All
I am a new mac user, and this is my first post, so please forgive me if I am repeating this issue.
I have recently upgraded my mac os to Snow leopard.
The issue that i have is that is that I installed a new USB mobile broadband stick from T-mobile, (which I was told by T-mobile is tested) when I tried to restard the Mac Book all I got was the Apple icon and it didnt boot up.
I spoke with mac support who were very helpful. They guided me and I ended up having to re-install the original OS and then had to upgrade again to snow loepard.
I installed the USB broadband again (big mistake), thinking that i may have been something else that caused the problem but the same problem occurred.
My question is:
Has anyone had any issues like this with T-mobile mobile broadband with their mac book?
Kind Regards
Jag

I received my O2 Mobile Broadband stick (Huawei E160) yesterday and I was unable to run the Connection Manager. I went to my local O2 shop with my MacBook Air where we tried other models of USB modems but to no avail. They then produced their own Mac Book and all devices installed without any errors. They checked the OS version and they were on 10.4.xx. Armed with this information I went to the Apple store where they checked that there was no problem with my MacBook Air and tried to install the device but they had the same issues. They then tried to install the device onto another MacBook Air and a MacBook Pro and it failed. The conclusion from the Apple staff is that you cannot install USB Broadband Modems if you are using the Snow Leopard OS.

Similar Messages

  • Hi! Has anybody succeeded in using Presonus Audio box 22 vsl with Os Mountain Lion? They doesn´t seem to connect. No problems when i used with Snow Leopard. I upgraded: Now is Kreonika not happy. Not happy at all!

    Hi! Has anybody succeeded in using Presonus Audio box 22 vsl with Os Mountain Lion? They doesn´t seem to connect.
    No problems when i used with Snow Leopard. I upgraded: Now Kreonika is not happy. Not happy at all!

    In cases like this, if you have an Apple store near by, they will most likely install the OS free of charge for you, if you can't bring your Apple ID along to prove you've paid for it.
    Would that work out for you?

  • Quicktime and start-up with Snow Leopard...

    I just installed Snow Leopard, Quicktime X seems to be a little choppy in HD (streaming video) now and also the start up is rather slow from re-start. I only have about 5% free disk space, will this help with lagging start-up? What about my choppy Quicktime when streaming??

    Yes! And possible data loss.
    Most here say 15% should be available.
    See things in Freeing up Disk space.
    Once you have freed it up,
    Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
    You could have some directory corruption due to not enough disk space. Let us know what errors Disk Utility reports and if DU was able to repair them. Disk Utility's Disk Repair is not perfect and may not find or repair all directory issues. A stronger utility may be required to finish the job.
    After that Repair Permissions.
    No need to report Permissions errors....we all get them.
      DALE

  • No wifi connection on start-up with snow leopard/airport extreme

    When i turn off my imac I lose my wifi. I get wifi back after rebooting modum. Problem is not the modum or signal.

    A couple of things, first is to run Airport Utility you can find it in Applications - Utilities - Airport Utility or you can get to it easily by typing Command Spacebar then type Airport Uitlity.
    The router's firmware is up to date so you're OK there. A couple of simple things to try are restarting in Safe Mode, this will clear some caches it's possible one is corrupt.
    Also I'd recommend following Apple's instructions, they say in the manual:
    Putting Your iMac to Sleep
    If you‘ll be away from your iMac for less than a few days, put it to sleep. When your iMac is in sleep, its screen is dark. You can quickly wake your iMac and bypass the startup process.
    BTW when you're replying to a post please click Reply in the post you are replying to, otherwise we can't tell who your communication is directed to.

  • HT1338 Problem burning CD's with Snow Leopard

    Trying to burn a song to a CD. It will appear on the burned CD but will not play on any type of player?

    Hi,
    Are you trying to burn an Audio CD>
    When itunes create an audio disc it converts m4a to a format that plays in a convention CD player - max time 80 minutes.
    if you are creating an mp3 CD, the tracks need to be mp3.
    You can create Data CD but there may be compatibility issues with the file format.
    Jim

  • My XP printer no longer works with snow leopard over the network

    My XP networked printer (Samsung 4200) no longer works with snow leopard after Mac update.  Printer hooked up to XP and can access it through network.
    When I print it requests that I to authenticate the printer with a user name and password but it's not password protected. I don't have a password, but I tried all the usuals anyways. 
    It worked fine a couple days ago, and I've tried everything since.  I've reset my printers, turned off both computers.  Plugged the printer directly into the Mac - didn't work at first but downloaded a new driver Splix - 2 (Samsung doesn't make an OS X driver for this printer) and got it working.  Reinstalled Bonjour on the PC, which can't even see a printer now.  Any help would be hugely appreciated.
    THanks in advance.

    helpthismacuser wrote:
    When I print it requests that I to authenticate the printer with a user name and password but it's not password protected. I don't have a password, but I tried all the usuals anyways. 
    Connecting from a Mac to Windows is password protected. If you tried to connect to a shared folder on Windows you would also be prompted to enter your Windows credentials. So when you do print next time, enter your Windows user details and password. If XP has no password then set one - it is bad practise to have a Windows computer without a password. And updates to Mac OS X expect you to have one set in the Windows computer.
    If for some reason you don't want to set a password in XP then enable the Guest account and you can use this on the Mac when you get the prompt (either select Guest or type it in).

  • I have an iMac mid 2009 with snow leopard.  I was so excited awaiting Lion, however, I am now afraid to download after hearing all about all the problems.  Should I wait awhile or go for it? my printer is showing power pc. How can I update printer to univ

    I have an iMac mid yr 2009 with snow leopard.  I checked and my howdoi.swf 8.o r22 is power pc and my HP sofware updater is also power pc.  How can I update these appls to be compat with Lion, as I am not computer savvy.  or should I wait awhile to install Lion?

    Lion upgrade questions and answers:  Apple Support Communities
    You may want to hold off upgrading to Lion for a bit and check with the HP site to see if they will update their HP software for Lion compatbility.

  • Tons of problems with Snow Leopard

    Made this post over at my blog but I figure this would be a better forum for it in hopes we can get some of these issues resolved... it seems like Apple has pulled a Microsoft and released what appears to be a beta version of Snow Leopard! Inexcusable bugs are appearing left and right, and the supposed "improvements" have actually hindered my computer performance and productivity...
    This really surprised me. After years of releasing amazing OS upgrades that seemed to make the best OS even better, it seems like Apple has taken 2 steps back with Snow Leopard. I can't tell you how upset I was to realize I was experiencing many problems that I previously only saw on PCs.
    After one of the many bugs popped up again on my computer, I got frustrated and started combing the internets for a list of known bugs in the OS and the inevitable slew of Apple users registering their disgust. Unfortunately, my search didn't turn up anything but positive reviews of the OS and very limited complaints on a few message boards. To this end, I'm posting this entry to try and help other users who are experiencing similar issues and hopefully get Apple to clean up this mess of an OS.
    Below I've created (and will be adding to) a list of problems I've experienced in OS X 10.6, Snow Leopard. I encourage everyone to list your Snow Leopard issues in the comments as well, in hopes we can create a master list of problems.
    I am using a 2 GHz Black MacBook (Core 2 Duo) with 2GB of RAM. Keep in mind Leopard (OS 10.5) was running flawlessly on this more than capable machine. I am currently running the latest Snow Leopard build, 10.6.1. I upgraded 10.5 with the retail version of Snow Leopard, integrating my current apps into 10.6 (did not do a clean install). I've organized my issues below by application. This post is less about third-party applications and more about Apple apps/built-in OS features, as Apple is fully accountable for these pieces.
    APPLE APPS
    Airport:
    • Airport is now incredibly slow getting past the "searching" status message and into what was known as "scanning" status in 10.5 (now called "Looking For Networks…" status message). This issue occurs most often when I revive the computer from sleep. I have to turn Airport off and on again, then wait an inordinate amount of time to get past the useless "Searching…" message.
    Volume and Sound:
    • I rely on my volume control icon on the toolbar. I change my system volume dozens of times every day (due to my job)... previously, I could click the volume icon then simply roll the scroll wheel on my two-button mouse to adjust the volume. Now, I have to actually move my mouse down onto the volume slider area before my scroll wheel works! What gives? In allowing the user to fine-tune the volume levels, Apple removed this functionality for some reason? This is a real pain for me as the extra second it takes to do this really adds up by the end of the day.
    • Sound now starts stuttering for no reason? When I wake my computer up from sleep and I have headphones or speaker plugged in, the audio stutters greatly. I have to unplug then re-plug my speakers or headphones to fix the issue! This is a problem I saw on many PCs due to sound cards not playing with Windows nicely, but was NEVER an issue I experienced using OS X.
    • The Mac OS startup chime plays on my MacBook external speaker when I startup, even though I have speakers or headphones plugged in! It also does not matter if I had my system volume on mute when restarting • the OS seems to now decide what volume my system should be at when I start up!
    Safari:
    • Defaults to 64-bit mode silently, and this breaks most plug-ins (my issue was with download manager iGetter, specifically). I had to manually Get Info on the app, then switch back to 32-bit mode, which it seems Apple has not designed Snow Leopard to support properly?
    • Freezes and crashes more often, most often when running Flash video. This occurs when I open multiple videos on YouTube, for example.
    • Hogging memory even more than it used to (1GB of RAM to run the app?? Really?)
    Stacks:
    • Apple seems to have completely removed the functionality or sortable sub-folder listings? For example, if I choose to sort my stack by "Date Modified", the initial list of folders in the stack appear by date, but all my sub-folders appear in Alpha order, and there is no way to change this! Come on Apple, why remove this?
    iPhoto:
    • Freezes completely when I go to "Export…". My Export opens on the Facebook tab of the dialogue box, and it seems the issue occurs when iPhoto can't find the source image. Rather than an error message though, I get the color wheel of death.
    Spotlight/Search:
    • When I search from a Finder window, sometimes I get the new feature of sortable results columns to work, but sometimes I don't. Seems arbitrary when it works and when it doesn't.
    System Preferences:
    • More of an annoyance, System Preferences now has to restart the first time I click on any third-party preference in "Other". Some work, most don't.
    Install:
    • In previous OS X upgrades, Apple gave me the option to "Backup and Install". This option was not present on Snow Leopard, so not sure what a user can d if they do not have a Time Machine backup and their install fails.
    Preview:
    • Preview slows down considerably when opening multiple files.
    THIRD-PARTY APPS
    Entourage:
    • Entourage froze up when I tried to simply delete one of my email accounts. The Accounts window went blank and the application froze.
    CS3:
    • Slower than ever, Photoshop is running at a snail's pace.
    I hope everyone can contribute to this string and get Apple to fix these problems.

    I can address some of these:
    Safari defaults to 64-bit mode silently, and this breaks most plug-ins (my issue was with download manager iGetter, specifically). I had to manually Get Info on the app, then switch back to 32-bit mode, which it seems Apple has not designed Snow Leopard to support properly?
    All applications, to the best of my knowledge, will run in 64-bit if they include 64-bit code. With most you'll never notice, but if an application supports plugins, then you have to pay attention to whether the plug-in is available in a 64-bit version. More and more are becoming available, but not all. If you have plug-ins that aren't, you need to set the app - Safari or whatever - to 32-bit mode. This is not a bug; it's necessitated by the conversion to full-time 64-bit support. The developer of iGetter claims that an update for compatibility with Safari in 64-bit mode is under development but no time frame has been given.
    Snow Leopard is perfectly capable of running 32-bit apps. You just can't mix them, running a 32-bit plugin in a 64-bit app.
    Freezes and crashes more often, most often when running Flash video. This occurs when I open multiple videos on YouTube, for example.
    Have you installed the latest version of Flash? Flash is almost always a bit problematical, but I've had no problems running Flash content on any site with SL.
    Hogging memory even more than it used to (1GB of RAM to run the app?? Really?)
    This may just be an issue of not being clear on how Mac OS X allocates memory. This article may provide some insight:
    http://support.apple.com/kb/HT1342
    More of an annoyance, System Preferences now has to restart the first time I click on any third-party preference in "Other". Some work, most don't.
    This is normal if a preference pane has not been provided in a 64-bit version.
    In previous OS X upgrades, Apple gave me the option to "Backup and Install". This option was not present on Snow Leopard
    Actually it was called "archive and install" and was removed as an option as no longer necessary. The normal installation creates all necessary new files and more robustly replaces old ones, so having an archive of the old system folder was deemed to no longer be needed.
    so not sure what a user can d if they do not have a Time Machine backup and their install fails.
    To restore completely from a full Time Machine backup, you erase the disk using Disk Utility from the menu in the Installer, then choose to restore from a TM backup.
    Preview slows down considerably when opening multiple files.
    Seems to work OK for me. I've had as many as twenty open with no noticeable slowdown. But you may be opening much larger documents than I have.
    Entourage froze up when I tried to simply delete one of my email accounts. The Accounts window went blank and the application froze.
    Impossible to offer any advice here without knowing what version of Entourage you're using, whether it's been fully updated, and what type of email account this was.
    Regards.

  • Problem with Snow Leopard 10.6.8

    I recently faced problem with Snow Leopard 10.6.8, and my system started getting shut down before login screen appears. I contacted apple support,and they replaced my Logic board.
    Now i am facing problem with track pad, and there is a huge degradation in system performance.
    Neither, bluetooth and internet port is working.
    Is that a known problem with 10.6.8 ? or does the people who worked upon replacing the logic board messed up something ?
    they recommended me to re-install Mac OS which came along with system.
    --Manish

    Thanks for a super Quick response.
    I have tried re-installing the MAC on top of the current installation 10.6.8 and, ( as system is so slow, it took around 5 hours for installation to complete ), yet the problem persisted.
    Currently i formatted the Macintosh HD, and i am doing a fresh installation. Hope it does work .. ??
    Else, i am not sure, what to go ahead with..
    The person who replaced LB, had an external hard drive with 10.6.7 installed on it, when system was booted from that disc , the things starts working normally.
    if after the fresh installation, problem persist, i will update.
    Also, please let me know if you have some solution for this problem.
    --Manish

  • Airport express printing problem with Snow Leopard

    I am no longer able to print to my shared printer after upgrading to Snow Leopard. I get a message that starts with "communication failure the computer is no longer able to communicate with your printer". My network consists of a dual-band Airport extreme and an Airport Express. The dual-band Airport Extreme creates the network and is connected to the internet. The printer (HP LaserJet 1012) is connected to the AirPort Express. The AirPort express joins the dual-band Airport extreme network for the sole purpose of turning the HP LaserJet 1012 into a shared wireless printer. Everything was working fine before the upgrade to Snow Leopard. When I connect the printer directly to my MAC via USB, it prints fine. I can "see" the printer fine through bonjour when it is connected to the AirPort express, but I get a failure whenever I try to print to it. I have tried plugging and unplugging the device. I have effectively redownloaded the print-driver by connecting the printer directly to my MAC. It sounds like a Snow Leopard bug. Any suggestions for a work-around? Thanks.

    I upgraded to Snow Leopard and had difficulties connecting to my HP Photosmart 7150 printer through Airport Express. Apple setup found a 3rd party printer driver by Gutenprint, which I downloaded and the printer works. But like it did under Leopard. Under the 10.5 OS, a print command would send a wake up signal to the HP, which automatically turned off after a period of idleness, and then print. Under 10.6, there is no wake up and I need to manually activate the printer. I went to the HP web site hoping to find a "new" driver for 10.6 and HP has posted a message saying it does not and will not be providing print driver for 10.6. It then has a long list of HP devices that cannot or will not print with Snow Leopard. So those with no-printing issues should check your model against the HP driver listing. I believe this is a neat way for HP to force Mac users who upgrade or install 10.6 to buy a new printer for which HP has a 10.6 driver. At least I can print and the only inconvenience that I can see if the lack of that wake up signal. My wife says it won't hurt me if I have to get up and walk to the room with the printer to turn it on!

  • Ongoing, very frustrating problems with Snow Leopard

    I've really been struggling to get my machine to work optimally with Snow Leopard. I recently upgraded to 4GB RAM thinking my problem was insufficient memory, but several seemingly intractable problems are persisting.
    1) Still having font issues. I am apparently missing a couple fonts, but cannot figure out which ones. The font that Apple uses during the installation of software is bitmapped, as are several fonts in my widgets (Stocks, for example). I've tried manually going through one by one in Font Book, but still can't get the right set, apparently.
    2) Firefox and Safari are now hanging like crazy on certain websites, and web browsing is generally sluggish. I recently upgraded by broadband to 6.0mps, so it's not the connection that's the problem. Some sites will not even load, and others are painfully slow.
    3) General system sluggishness. I have tried cleaning the cache with Snow Leopard Cache Cleaner, I've tried repairing permissions. Performance is still slow relative to Leopard -- despite my RAM upgrade. For example, it takes forever for the widgets to load. They used to be lighting fast in Leopard.
    HELP!

    Austinite70 wrote:
    2) Firefox and Safari are now hanging like crazy on certain websites, and web browsing is generally sluggish. I recently upgraded by broadband to 6.0mps, so it's not the connection that's the problem. Some sites will not even load, and >others are painfully slow.
    Here is a solution to having a sluggish internet experience that has worked for some.
    1. Go Library/Preferences/SystemConfiguration
    2. Move the the SystemConfiguration folder to your desktop:
    3. Reboot
    The folder moved should be recreated upon reboot. You may have to reconnect to your wireless network if applicable. And, you may need to go System Preferences > Sharing and re-enter your computer's name. Check what name is given in sharing before following the instructions. If problems develop, then your can move the original folder back where they it started—overwriting anything recreated.
    3) General system sluggishness. I have tried cleaning the cache with Snow Leopard Cache Cleaner, I've tried repairing permissions. Performance is still slow relative to Leopard -- despite my RAM upgrade. For example, it takes forever >for the widgets to load. They used to be lighting fast in Leopard.
    There are a variety of possible fixes for general slowness, in addition, to maintenance that is not performed automatically in Sno. Here are some nonmaintenance-related possibilities:
    1. If you are running iAntivirus, then uninstall it.
    2. Look in Library > StartupItems and in System > Library > StartupItems. Move whatever you find in them to the desktop to see if your problem is resolved. You can move whatever you want back one at a time to test which, if any, is your problem.
    3. I Go > System > Library > LaunchDaemons/com.apple.audio.coreaudiod.plist and delete this file. I caution you here that all possible solutions one tries are at his or her own risk.
    You'll lose all system sounds in Finder with this possible fix, but restoring the plist and stopping then starting the service seems to put all back in order.
    4.
    1. Create a new user
    2. Test apps to see that they work with no crashing.
    3. Drag your data (not your whole home folder) into their proper places in your new user home folder
    4. Re-enter your app preferences if you are going to keep using the new user.
    5. If you want to use the old user name, then delete the old account; recreate it; and move everything back to the original locations.
    6. You will need to fix the permissions, app settings, etc.
    5. Go back to 10.6.

  • Are there any problems with Snow Leopard Server (Xserve) and PPC Clients

    Hi,
    are there any problems identified yet with Snow Leopard Server, installed on a Xserve and PPC Clients running Mac OS X Tiger and Leopard?
    Currently I have a Xserve Intel running Leopard Server and about 12 Mac Minis PPC running Mac OS X Tiger and Mac OS X Leopard. The Xserve serves services like DNS, OpenDirectory, Software Update Server, NetBoot, etc. All users have Home Directories stored on the Xserve.
    Now I want to install Snow Leoaprd Server on the Xserve, but I wonder if there are any problems using the PPC Clients? I have read something like this on a german website.
    Thanks!

    We've actually found that the Server 10.6.3 DVD does an amazingly smooth job of upgrading 10.5.8. We've been upgrading our production servers and nothing has gone wrong yet. Snow Leopard employs an archive and install method of upgrading which results in an install which is very close to a clean install. So it's been very convenient for us because our servers are used as Windows PDCs and it's a pain in the *** to have to re-join all PCs to the domain if we start from scratch.

  • Two problems with Snow Leopard

    I have two problems since I upgraded to Snow Leopard that I can't figure out how to fix. I have a Mac Mini hooked up to my TV and I from time to time remote into it and since upgrading I am getting an additional icon in my shares. If I click on it there are multiple copies of the drives on the mini. My time capsule does the same thing.
    A screen shot is here.... http://farm3.static.flickr.com/2705/4143158869180c412585o.jpg
    The second issue is when using spaces with keyboard short cuts the spaces icon that appears to show you which space you are moving into does not disappear after you have moved into the space. The only way I have been able to make it disappear is to select the space with the menu icon. When I do this it does disappear.
    Anyone have any ideas about these problems??
    d

    You need Lion and iCloud unfortunately; iCloud is not supported by Snow leopard.

  • CS2 InDesign problems with Snow Leopard

    I recently purchased a new iMac with Snow Leopard. I installed my CS2 and everything seemed okay. Apple said I would have no trouble with CS2 on the new operating system.
    InDesign is doing strange things. When I move a text box, the text disappears. I have to click the text cursor over the text and it reappears. Also, starting yesterday, when I export a file to PDF, InDesign crashes.
    Other than purchasing CS4, is there a way to fix these problems?
    Thank you.

    Sorry my email showing no message. What would be doing that?
    I called Apple and they told me to install Rosetta, which I did. It helped for a while—I could move a text box and the text would not disappear but I still could not export to a pdf without InDesign crashing. They gave me a number to call for Adobe. I haven't called yet because I know the answer.
    This is really a pain. I am working on a 32 page document with photos and lots of text. I always export to a pdf so I can send it out for proofing. I will have to transfer the files to my old computer to make pdfs.
    Thanks for all your help.

  • Problems with Snow Leopard?

    Are there problems showing up with Snow Leopard? Such as conflicts , glitches , crashes, etc?

    Hi Gerald...
    Yes... basically, I'd suggest: don't upgrade
    I should have remembered: if it ain't broke, don't fix it (and all I was even hoping for or expecting was for my Mac to operate about the same with maybe a minor 64 bit speed increase).
    I have encountered a number of problems, and what is worse, even after getting some of them sorted out (and some not yet) and using SL for about a week, I very much regret 'upgrading' to SL (and will be working on restoring Leopard tonight). I have looked at every upgraded and new aspect of SL, and there is nothing of any significance - I have a dual core processor (relatively new iMac, very basic setup, all new brand name software), which now runs most things in 64 bit, and have found no perceptible speed increase in anything from the basic to the graphic intensive (though I have no games on my machine). In fact, I have noticed quite the opposite - very significant lags, commonly in saving files, opening dialogs and certain operations in many software programs (including Apple OD included programs, other Apple software, and 3rd party software such as Adobe CS4) - even simply saving an image in Safari now takes a painfully long time to simply display the dialog. The 'beach ball' has become a very common site, and a great many of the other lags and slowness occurs without the beach-ball appearing. That, combined with UPS related problems, the system crashing, the system simply hanging when left on overnight, printer driver problems, screen zoom problems, various program crashes, Finder not working properly (doesn't crash but doesn't find consistently/reliably), and general bad experience with SL now making what I consider a very basic/typical/safe Mac setup become unreliable and unstable and slow and sluggish, makes the SL 'upgrade' 0% benefit and 100% detrimental for me.
    With (non-snow) Leopard, my Mac was basically perfect, reliable, fast, everything ran right and flawlessly, etc - all the stuff they talk about in their commercials. With SL, Apple has severely disappointed, and added 0 advantages/features and made my Mac slow, sluggish, unreliable and unstable and problematic - just like the PC they compare to in their commercials. I have also been waiting and checking for a 'software upgrade' re the countless problems reported here re SL - nothing has come, or seems to be forthcoming. I simply hope I will be successful in restoring my Mac (through time machine) to it's pre-snow condition.
    And, it you do try SL, I'd suggest you do a full image backup (which the OS install does not warn you to do, or do itself) beforehand.

Maybe you are looking for

  • All Mac network setup?

    Hello all! This is my first post here. Thanks for taking the time to help me with an answer to my question below. I work for a small graphic design firm. We all work on iMacs here in our office (6 Macs total) with the exception of two PCs (1 for rece

  • How to read data from an word file

    Hi to all experts. My requirement is to read a word file and convert it to a text file.How to do it?

  • Problems with mobile projects with apache flex 4.8 and an overlay of the latest air sdk

    Using flash builder 4.7 beta, apache flex 4.8 and an overlay of the latest air sdk, i got resolution problems while testing the mobile app (windows version on windows 7) with the air (ipad)emulator. That means the emulator is much bigger than my scre

  • Random keyboard shortcuts are not working with Yosemite

    I just upgraded my personal and work MacBooks to Yosemite and also updated my personal and work CC apps. Since then, I've had an array of problems. Random shortcuts, such as Cmd+H, don't work. On one of my laptops, I can no longer right-click in AI,

  • Applecare online registration failure

    I have been trying to register my Applecare Protection Plan online and cannot complete the process. I am asked to 'select agreement type' from a pulldown menu that contains no options! I have wasted enough time messing with what is supposed to be a q