Problems on VFx3

2 billings documents are bloced on vfx3 that i am unable to release to FI module(accounting)
it throws one error message: Account type/account for invoice reference does not match item
now, how to counter this error message so that i can release billing docs to accounting

Hi,
If you want to know what settings are not in VKOA, go to VF02 for the invoices, and in the menu path:
Enviroment -> Account determination analysis -> Revenue accounts and search the errors.
When you have the data, do the settings in VKOA
I hope this helps you.
Regards,
Eduardo

Similar Messages

Function that simmulates VFX3

Hello
I need to create a report that brings me all the Blocked Documents and their error message (the detailed one). The problem with VFX3 is that if the billing document is correct, then it will post the b. doc. I only want to display the info.
Do anybody knows if there is a function that retrieves the error messages for blocked billing docs?
TIA

View M_VCFA and doesn't have the info required and the program mentioned is for Sales Orders not Billing Documents. I need to obtain some information like this:
1 000000 Document 1 saved (error in account determination)
2 000000 No standard cost estimate could be found for material "xxxx"

Releasing billing doc to accounting with FICO Interface problem

Dear all,
I have problem while releasing billing doc to accounting.
When I use TCODE VF02, to release, I got the message :
Condition type MWST tax code A1 does not exist
Message no. FF762
Diagnosis
When calculating tax, the system tried to determine the condition amount and the condition number from tables A003 and A053 using the specified condition type and tax code. However, no values were found there.
System Response
The specified amount cannot be posted in FI.
Procedure
Check the Customizing settings for the specified tax code. Check whether the validity period (possible with tax jurisdictions) is defined.
I have checked the condition Record MWST for tax code A1 through Analysis, and the value is already there
I have checked the condition though TCODE VK12, the value is already there
I have checked the condition though TCODE FTXP, the tax code is already maintain
when I checked with TCODE VFX3, I saw the Posting Status is Error In Accounting Interface
I might be not saw it thoroughly..
What should I do ...?
Regards,
Rizki Harris

Hi,
Check whether account determination is done in OB40 (by FI people).
there we have to assign the GL account for that tax condition account key (MWS) with Tax code A1.
For this goto OB40 and double click on MWS transaction and you can see the tax code and GL account if you maintained here.

Problem in billing document

hi all,
i have a problem in billing.
i am creating an invoice for a free of charge delivery for which there should not be an accounting document. the document is saved with an error message 'no accounting documents created'. and it is appearing in VFX3 release documents for accounting list.
the posting status of the invoice document is 'error in accounting interface' which is there in invoice document's Header->Header.
please help
harini

Hi
This is against SAP standard.
"Free-of-charge delivery" is an order type for which Billing is not relevant.
SAP has made this order type to use when you want to send some demo/sample material (for display purpose)to your customer which do not have any commercial value.
The item category (KLN)is not relevant for billing.
If still you try to do billing then you have to find errors.
You can use some other appropriate order type which is suitable for your requirement.
All order type have got different features that is why you will find different order type in standard SAP system.
I think instead changing the settings in FD,you should use the relevant order type which matches your requirement.

Billing Number Range problem ( accounting document not generated)

Hi All,
I have created some billing types and for them I have assigned some internal number ranges. Now when I create a billing document it is getting saved with the proper number range but no accounting document is getting generated.
Also when I try to release the invoice I am getting an error which says " *Incorrect doc.no.: 10000009. Select document number between 0090000000 and 0099999999* "
K I N D L Y     suggest as U R G E N T.
Regards,
Danny.

Dear,
          Billing Number Range problem ( accounting document not generated) is not an error because when you create billing document then accounting document not generated. Accounting done after posting of that billing document with VFX3 or VF02 T.Code by account department.
           And for second issue you had define number range between 0090000000 and 0099999999 for invoice so thats why it happen.
Regards,
Sandip Shaktavat

Problems modifying a itab

Hi all.
We are enhacing the tcode vfx3 report adding new fields. At this point we have added 2 fields (netwr and mwsbk) by the use of a user exit. Everything is ok.
Now we want to add a new field(mrnkz 'char 1'), the steps we follow are the same as we followed before, but now it is not working properly.
CODE:
"loop sobre la tabla
LOOP AT c_vmcfa.
READ TABLE it_struct INTO lwa_struct WITH KEY vbeln = c_vmcfa-vbeln.
c_vmcfa-netwr = lwa_struct-netwr.
c_vmcfa-mwsbk = lwa_struct-mwsbk.
c_vmcfa-mrnkz = lwa_struct-mrnkz.
MODIFY TABLE c_vmcfa." TRANSPORTING netwr mwsbk mrnkz.
CLEAR c_vmcfa.
ENDLOOP.
We are having problems when the value of lwa_struct-mrnkz contains a 'X'. In this case, the modify throws an exception. When the value of lwa_struct-mrnkz isn't a 'X', the line is modified properly. The exception thrown is:
"Object SDBLBDDL of class RE and language EN does not exist. "
How can i solve this problem? Is this a documentation problem?.

Hi
use index for modifyin the table.
like;
LOOP AT c_vmcfa.
data; lv_index type sy-tabix.
lv_index = sy-tabix.
READ TABLE it_struct INTO lwa_struct WITH KEY vbeln = c_vmcfa-vbeln.
c_vmcfa-netwr = lwa_struct-netwr.
c_vmcfa-mwsbk = lwa_struct-mwsbk.
c_vmcfa-mrnkz = lwa_struct-mrnkz.
MODIFY TABLE c_vmcfa index lv_index." TRANSPORTING netwr mwsbk mrnkz.
clear lv_index.
ENDLOOP.
Thanks
Lalit

Credit Memo is not released to accounting using VFX3 - Error

Hi SD gurus,
I have one problem. When the credit price adjustment is created and when the credit memo is created for the price adjustment. Credit memo is not passed to accounting. When i used to Release the document through VFX3 t.code i am getting error as Item Specified for invoice reference is not an invoice item.
I have simulated the same scenario in different system for me the it is creating the accounting document. But the user is unable to create the accounting document they are facing the above problem.
I have suggested them to cancel the credit memo and requested to recreate the invoice and check for release for accounting.
Please suggest whant could be the problem. It is urget.
Thanks in advance.
Regards.
SD Team

Hi SD Gurus.
I found the problem, The problem is due to the Posting status in Invoice header were the status shows error in accounting interface. For to rectify this cancel the invoice and recreate the same and it will get posted.
Regards.
SD team

VFX3 update flood

Hi Expert!
I have a performance issue by the TA code VFX3 Release Billing documents since 15 days, Users were executing in peak time but we never get complain, suddenly, we start to receive complain from the users, they cannot save / post & print the document once we exeucte the VFX3, All UPD work process occupied on both nodes and also, update server displaying the status "initial" , more then 500 records are in the queue for the waiting to update the data.
i have found some SAP Notes related wtih this problem with recommended patches but we are the highest patches, so that, we don't require to apply the patches for the update flood by the VFX3.
I am working with abaper to check the index that do we need to require to re-organize the index and table, in the mean time, i have a temperary solutions, i have rescheduled the VFX3 not to execute in the peak time which is from 07:00 clock morning till 13:00.
for that one, i have to lock / unlock the TA Code VFX3 by the SM01. is there any procedure or report that we scheduled it for the lock / unlock automaticlly on the certain time.
Please provide the solution for the above problem.
REgards
Anwer Waseem
SAP BASIS

>
Anwer Waseem wrote:
> for that one, i have to lock / unlock the TA Code VFX3 by the SM01. is there any procedure or report that we scheduled it for the lock / unlock automaticlly on the certain time.
>
> Please provide the solution for the above problem.
>
> REgards
>
>
> Anwer Waseem
> SAP BASIS
1.) you can do a batch-input recoding for transaction SM01 using LSMW (or SHDB). make one recording for locking VFX3, one for unlocking it and schedule them in a job as step 1. in the second step run abap RSBDCSUB with the name of the batch-input-recordings assembled in step 1.
2.) check the values for enque/enq-queue/size and enque/table_size in transaction RSPFPAR or RZ11 (RZ10). look up notes on those parameters for finding the optimal value for your system. note: this might not solve the locking problem, but it might lessen it.

VFX3 - Selected Details

Dear Friends,
I used vfx3 for release Billing Documents
now i want to validate it with some conditions, i have one custom include for that
my problem is how can i get selected document lines in VFX3 data grind
are a there any table, structure .....
I hope, you have clear about my question.
Thanks in Advanced!

Use these tables.
VBRK,VBRP.

A problem with threads

I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
Thank you in advance,
Lefty

This was one solution from the socket programming forum, have you tried this??
public Thread MyThread extends Thread{
     boolean active = true;
     public void run(){
          ss.setSoTimeout(90);
          while (active){
               try{
                    serverSocket = ss.accept();
               catch (SocketTimeoutException ste){
               // do nothing
     // interrupt thread
     public void deactivate(){
          active = false;
          // you gotta sleep for a time longer than the
          // accept() timeout to make sure that timeout is finished.
          try{
               sleep(91);
          }catch (InterruptedException ie){
          interrupt();
}

A problem with Threads and MMapi

I am tring to execute a class based on Game canvas.
The problem begin when I try to Play both a MIDI tone and to run an infinit Thread loop.
The MIDI tone "Stammers".
How to over come the problem?
Thanks in advance
Kobi
See Code example below:
import java.io.IOException;
import java.io.InputStream;
import javax.microedition.lcdui.Graphics;
import javax.microedition.lcdui.Image;
import javax.microedition.lcdui.game.GameCanvas;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
public class MainScreenCanvas extends GameCanvas implements Runnable {
     private MainMIDlet parent;
     private boolean mTrucking = false;
     Image imgBackgound = null;
     int imgBackgoundX = 0, imgBackgoundY = 0;
     Player player;
     public MainScreenCanvas(MainMIDlet parent)
          super(true);
          this.parent = parent;
          try
               imgBackgound = Image.createImage("/images/area03_bkg0.png");
               imgBackgoundX = this.getWidth() - imgBackgound.getWidth();
               imgBackgoundY = this.getHeight() - imgBackgound.getHeight();
          catch(Exception e)
               System.out.println(e.getMessage());
      * starts thread
     public void start()
          mTrucking = true;
          Thread t = new Thread(this);
          t.start();
      * stops thread
     public void stop()
          mTrucking = false;
     public void play()
          try
               InputStream is = getClass().getResourceAsStream("/sounds/scale.mid");
               player = Manager.createPlayer(is, "audio/midi");
               player.setLoopCount(-1);
               player.prefetch();
               player.start();
          catch(Exception e)
               System.out.println(e.getMessage());
     public void run()
          Graphics g = getGraphics();
          play();
          while (true)
               tick();
               input();
               render(g);
      * responsible for object movements
     private void tick()
      * response to key input
     private void input()
          int keyStates = getKeyStates();
          if ((keyStates & LEFT_PRESSED) != 0)
               imgBackgoundX++;
               if (imgBackgoundX > 0)
                    imgBackgoundX = 0;
          if ((keyStates & RIGHT_PRESSED) != 0)
               imgBackgoundX--;
               if (imgBackgoundX < this.getWidth() - imgBackgound.getWidth())
                    imgBackgoundX = this.getWidth() - imgBackgound.getWidth();
      * Responsible for the drawing
      * @param g
     private void render(Graphics g)
          g.drawImage(imgBackgound, imgBackgoundX, imgBackgoundY, Graphics.TOP | Graphics.LEFT);
          this.flushGraphics();
}

You can also try to provide a greater Priority to your player thread so that it gains the CPU time when ever it needs it and don't harm the playback.
However a loop in a Thread and that to an infinite loop is one kind of very bad programming, 'cuz the loop eats up most of your CPU time which in turn adds up more delays of the execution of other tasks (just as in your case it is the playback). By witting codes bit efficiently and planning out the architectural execution flow of the app before start writing the code helps solve these kind of issues.
You can go through [this simple tutorial|http://oreilly.com/catalog/expjava/excerpt/index.html] about Basics of Java and Threads to know more about threads.
Regds,
SD
N.B. And yes there are more articles and tutorials available but much of them targets the Java SE / EE, but if you want to read them here is [another great one straight from SUN|http://java.sun.com/docs/books/tutorial/essential/concurrency/index.html] .
Edited by: find_suvro@SDN on 7 Nov, 2008 12:00 PM

J2ME problem with threads

Hi all,
I would like to ask you for a help. I need to write a small program at my university. I started to write a midlet which function would be to countdown time for sports activities. I woul like to start a new thread - the one that counts down - and at the same time make the main thread sleep. After the "countdown" thread finishes, the main thread wakes up and waits for user input. The problem is that when the "countdown" thread finishes his work, I've got Uncaught exception java/lang/NullPointerException. error and the midlet halts.
Below you can find the code
import java.lang.*;
import java.util.*;
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
public class intervals extends MIDlet implements CommandListener
public Display ekran;
private SweepCanvas sweeper;
private Form rundy;
private TextField round0, round1, round2, round3, round4, round5, round6, round7, round8;
private long czas,x;
private Command exitCommand;
private Command addRound;
private Command delRound;
private Command start;
private TextField repeat;
private Form odliczanie;
private Alert ostrz;
Licznik thread;
String test;
StringItem test1;
int parz,i,j,k;
static int l;
int ilrund;
int ilpowt;
Item sec;
long sec1;
public intervals()
    rundy = new Form("Interwały sportowe");
    exitCommand = new Command("Wyjście", Command.EXIT, 2);
    addRound = new Command("Dodaj","Dodaj rundę", Command.ITEM,1);
    delRound = new Command("Usuń","Usuń ostatnią rundę", Command.ITEM,1);
    start = new Command("Start", Command.ITEM,1);
    odliczanie = new Form("Odliczanie");
    TextField dodaj(TextField kolej)
        kolej=new TextField("Podaj czas (s) rundy "+parz,null, 4, TextField.NUMERIC);//stworzenie nowej instancji do wybierania czasu trwania rundy
        if(rundy.size()==0)
            rundy.insert(rundy.size(),kolej);
            else
                rundy.insert(rundy.size()-1, kolej);
        return kolej;
    void odliczanie(TextField round)
        monitor m=new monitor();
        k=Integer.parseInt(round.getString());
        ekran.setCurrent(odliczanie);
        thread=new Licznik(k,odliczanie);
        thread.start();
        ekran.setCurrent(rundy);
public void startApp()// throws MIDletStateChangeException
    rundy.deleteAll();
    repeat = new TextField("Podaj ilość powtórzeń",null,1,TextField.NUMERIC);
    rundy.addCommand(addRound);
    rundy.addCommand(exitCommand);
    rundy.setCommandListener(this);
    Canvas obrazek = new MyCanvas();
    ekran = Display.getDisplay(this);
    ekran.setCurrent(obrazek);
    czas=System.currentTimeMillis();
    while (System.currentTimeMillis()<czas+1000)
        continue;
    ekran.setCurrent(rundy);
public void pauseApp()
public void destroyApp(boolean unconditional)
    notifyDestroyed();
public void commandAction(Command c, Displayable s)
    if (c == exitCommand)
        destroyApp(false);
        notifyDestroyed();
    else if(c==addRound)
        if(rundy.size()==0)//Sprawdzenie ilości elementów w celu poprawnego wyświetlania liczby rund w formie
            parz=1;
            else
            parz=rundy.size();
        switch(parz)
            case 1:
                round0=dodaj(round0);break;
            case 2:
                round1=dodaj(round1);break;
            case 3:
               round2= dodaj(round2);break;
            case 4:
                round3=dodaj(round3);break;
            case 5:
                round4=dodaj(round4);break;
            default:
                ostrz=new Alert("Uwaga","Maksymalna liczba rund wynosi 9", null, AlertType.INFO);
                ostrz.setTimeout(3000);
                ekran.setCurrent(ostrz);
        if(rundy.size()==1)
            rundy.append(repeat);
            rundy.addCommand(start);
        rundy.addCommand(delRound);
    else if(c==delRound)
        if(rundy.size()!=0)
            rundy.delete(rundy.size()-2);
            if (rundy.size()==1)
                rundy.deleteAll();
            if(rundy.size()==0)
                rundy.removeCommand(delRound);
                rundy.removeCommand(start);
    else if(c==start)
        ilrund=rundy.size()-1;
        if(this.repeat.size()>0)
            ilpowt=Integer.parseInt(this.repeat.getString());
        ekran = Display.getDisplay(this);
        for (i=1; i<=ilpowt;i++)
            odliczanie= new Form("Odliczanie");
             for (j=0;j<ilrund;j++)
                switch(j)
                     case 0:
                         odliczanie(round0);
                         break;
                     case 1:
                         odliczanie(round1);
                         break;
                     case 2:
                         odliczanie(round2);
                         break;
                     case 3:
                         odliczanie(round3);
                         break;
                     case 4:
                         odliczanie(round4);
                         break;
                     case 5:
                         odliczanie(round5);
                         break;
                     case 6:
                         odliczanie(round6);
                         break;
                     case 7:
                         odliczanie(round7);
                         break;
                     case 8:
                         odliczanie(round8);
                         break;
class Licznik extends Thread
    int czas1,k;
    Form forma;
    monitor m;
    public Licznik(int k,Form formap)
        czas1=k;
        forma=formap;
    public synchronized void run()
        while(czas1>0)
            forma.deleteAll();
            forma.append("Czas pozostały (s): "+czas1);
            try{Thread.sleep(1000);} catch(InterruptedException e){e.printStackTrace();}
            czas1--;
        if(czas1<=0)
            m.put();
    }and monitor class
public class monitor
boolean busy=false;
synchronized void get()
    if(!busy)
        try
            wait();
        }catch(InterruptedException e){e.printStackTrace();}
    notify();
synchronized void put()
    if(busy)
        try
        wait();
        }catch(InterruptedException e){e.printStackTrace();}
    busy=true;
    notify();
}Can anybody help me with this?

Groovemaker,
Your Licznik class has a member m of type monitor, which has not been instantiated (in other words is null) hence, when calling m.put() you get NullPointerException. Please also mind, that using Thread.sleep(1000) is not an accurate way of measuring time.
If I may, please use recommended for Java class naming conventions - some of your names use lower case, while other don't which is confusing to the reader.
Daniel

Problem with threads within applet

Hello,
I got an applet, inside this applet I have a singleton, inside this singleton I have a thread.
this thread is running in endless loop.
he is doing something and go to sleep on and on.
the problem is,
when I refresh my IE6 browser I see more than 1 thread.
for debug matter, I did the following things:
inside the thread, sysout every time he goes to sleep.
sysout in the singleton constructor.
sysout in the singleton destructor.
the output goes like this:
when refresh the page, the singleton constructor loading but not every refresh, sometimes I see the constructor output and sometimes I dont.
The thread inside the singleton is giving me the same output, sometime I see more than one thread at a time and sometimes I dont.
The destructor never works (no output there).
I don't understand what is going on.
someone can please shed some light?
thanks.
btw. I am working with JRE 1.1
this is very old and big applet and I can't convert it to something new.

Ooops. sorry!
I did.
     public void start() {
     public void stop() {
     public void destroy() {
          try {
               resetAll();
               Configuration.closeConnection();
               QuoteItem.closeConnection();
          } finally {
               try {
                    super.finalize();
               } catch (Throwable e) {
                    e.printStackTrace();
     }

Problem with Threads and a static variable

I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
Code functionality:
A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
The problem as far I understand is:
Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
Thanks,
B.D.
Code:
private static volatile boolean bChanged = false;
private static Thread objMainProcess;
   protected static void Init(){
        objMainProcess = new Thread() {
            public void run() {
                while( objMainProcess == Thread.currentThread() ) {
                   GetState();
        objMainProcess.setDaemon( true );
        objMainProcess.start();
    public static void initStatusTimer(){
        if(objTimer == null)
             objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
                public void actionPerformed( java.awt.event.ActionEvent evt){
                          SetState();
    private static void SetState(){
        if( objMainProcess == null ) return;
        synchronized( objMainProcess ) {
            bChanged = true;
            try{
                objMainProcess.notify();
            }catch( IllegalMonitorStateException e ) {}
    private static boolean GetState() {
        if( objMainProcess == null ) return false;
        synchronized( objMainProcess ) {
            if( bChanged) {
                SendMessage();
                bChanged = false;
                return true;
            try {
                objMainProcess.wait();
            }catch( InterruptedException e ) {}
            return false;
    }

Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
Again as you said, There is a reason I can't call sendMessage() inside setState().
The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
Thanks,
B.D.

Problem with threads running javaw

Hi,
Having a problem with multi thread programming using client server sockets. The program works find when starting the the application in a console using java muti.java , but when using javaw multi.java the program doesnt die and have to kill it in the task manager. The program doesnt display any of my gui error messages either when the server disconnect the client. all works find in a console. any advice on this as I havent been able to understand why this is happening? any comment would be appreciated.
troy.

troy,
Try and post a minimum code sample of your app which
does not work.
When using javaw, make sure you redirect the standard
error and standard output streams to file.
Graeme.Hi Graeme,
I dont understand what you mean by redirection to file? some of my code below.
The code works fine under a console, code is supposed to exit when the client (the other server )disconnects. the problem is that but the clientworker side of the code still works. which under console it doesnt.
public class Server{
ServerSocket aServerSocket;
Socket dianosticsSocket;
Socket nPortExpress;
ClientListener aClientListener;
LinkedList queue = new LinkedList();
int port = 0;
int clientPort = 0;
String clientName = null;
boolean serverAlive = true;
* Server constructor generates a server
* Socket and then starts a client threads.
* @param aPort      socket port of local machine.
public Server(int aPort, String aClientName, int aClientPort){
port = aPort;
clientName = aClientName;
clientPort = aClientPort;
try{
// create a new thread
aServerSocket = new ServerSocket(port) ;
// connect to the nPortExpress
aClientListener = new ClientListener(InetAddress.getByName(clientName), clientPort, queue,this);
// aClientListener.setDaemon(true);
aClientListener.start();
// start a dianostic port
DiagnosticsServer aDiagnosticsServer = new DiagnosticsServer(port,queue,aClientListener);
// System.out.println("Server is running on port " + port + "...");
// System.out.println("Connect to nPort");
catch(Exception e)
// System.out.println("ERROR: Server port " + port + " not available");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Server port " + port + " not available", JOptionPane.ERROR_MESSAGE);
serverAlive = false;
System.exit(1);
while(serverAlive&&aClientListener.hostSocket.isConnected()){
try{
// connect the client
Socket aClient = aServerSocket.accept();
//System.out.println("open client connection");
//System.out.println("client local: "+ aClient.getLocalAddress().toString());
// System.out.println("client localport: "+ aClient.getLocalPort());
// System.out.println("client : "+ aClient.getInetAddress().toString());
// System.out.println("client port: "+ aClient.getLocalPort());
// make a new client thread
ClientWorker clientThread = new ClientWorker(aClient, queue, aClientListener, false);
// start thread
clientThread.start();
catch(Exception e)
//System.out.println("ERROR: Client connection failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client connection failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end constructor Server
void serverExit(){
     JOptionPane.showMessageDialog(null, "Server ","ERROR: nPort Failure", JOptionPane.ERROR_MESSAGE);
     System.exit(1);
}// end class Server
*** connect to another server
public class ClientListener extends Thread{
InetAddress hostName;
int hostPort;
Socket hostSocket;
BufferedReader in;
PrintWriter out;
boolean loggedIn;
LinkedList queue;      // reference to Server queue
Server serverRef; // reference to main server
* ClientListener connects to the host server.
* @param aHostName is the name of the host eg server name or IP address.
* @param aHostPort is a port number of the host.
* @param aLoginName is the users login name.
public ClientListener(InetAddress aHostName, int aHostPort,LinkedList aQueue,Server aServer)      // reference to Server queue)
hostName = aHostName;
hostPort = aHostPort;
queue = aQueue;
serverRef = aServer;
// connect to the server
try{
hostSocket = new Socket(hostName, hostPort);
catch(IOException e){
//System.out.println("ERROR: Connection Host Failed");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort Failed", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end constructor ClientListener
** multi client connection server
ClientWorker(Socket aSocket,LinkedList aQueue, ClientListener aClientListener, boolean diagnostics){
queue = aQueue;
addToQueue(this);
client = aSocket;
clientRef = aClientListener;
aDiagnostic = diagnostics;
} // end constructor ClientWorker
* run method is the main loop of the server program
* in change of handle new client connection as well
* as handle all messages and errors.
public void run(){
boolean alive = true;
String aSubString = "";
in = null;
out = null;
loginName = "";
loggedIn = false;
while (alive && client.isConnected()&& clientRef.hostSocket.isConnected()){
try{
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(client.getOutputStream()));
if(aDiagnostic){
out.println("WELCOME to diagnostics");
broadCastDia("Connect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
out.println("WELCOME to Troy's Server");
broadCastDia("Connect : client "+client.getInetAddress().toString());
     out.flush();
String line;
while(((line = in.readLine())!= null)){
StringTokenizer aStringToken = new StringTokenizer(line, " ");
if(!aDiagnostic){
broadCastDia(line);
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
else{
if(line.equals("GETIPS"))
getIPs();
else{
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
} // end while
catch(Exception e){
// System.out.println("ERROR:Client Connection reset");
                         JOptionPane.showMessageDialog(null, (e.toString()),"ERROR:Client Connection reset", JOptionPane.ERROR_MESSAGE);
try{
if(aDiagnostic){
broadCastDia("Disconnect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
broadCastDia("Disconnect : client "+client.getInetAddress().toString());
     out.flush();
// close the buffers and connection;
in.close();
out.close();
client.close();
// System.out.println("out");
// remove from list
removeThreadQueue(this);
alive = false;
catch(Exception e){
// System.out.println("ERROR: Client Connection reset failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client Connection reset failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end method run
* method run - Generates io stream for communicating with the server and
* starts the client gui. Run also parses the input commands from the server.
public void run(){
boolean alive = true;
try{
// begin to life the gui
// aGuiClient = new ClientGui(hostName.getHostName(), hostPort, loginName, this);
// aGuiClient.show();
in = new BufferedReader(new InputStreamReader(hostSocket.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(hostSocket.getOutputStream()));
while (alive && hostSocket.isConnected()){
String line;
while(((line = in.readLine())!= null)){
System.out.println(line);
broadCast(line);
} // end while
} // end while
catch(Exception e){
//     System.out.println("ERRORa Connection to host reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort reset", JOptionPane.ERROR_MESSAGE);
try{
hostSocket.close();
     }catch(Exception a){
     JOptionPane.showMessageDialog(null, (a.toString()),"ERROR: Exception", JOptionPane.ERROR_MESSAGE);
alive = false;
System.exit(1);
} // end method run

Problems on VFx3

Similar Messages

Maybe you are looking for