Problems only with Adobe ImageReady Animated GIF
Anyone encounter a problem and solution for getting ImageReady animated GIF working properly in a java app? Developer placed 2 animated gifs in the app which caused the CPU system resources to spike to 100%.
We then tested animated GIFs made from Macromedia Flash and also a freeware animated GIF editor, and both work out fine in the same java app.
It's odd, but we think there's a problem specifically with animated GIFs produced by Adobe's Image Ready in the Creative Suite 1 package.
Anyone have more insight?
Its been a long time since I have used ImageReady, and then it was for about year when CS3 came out. So my memory if very rusty with that program. (In other words I am hoping that I am not too far off base, lol.)
Check and make sure there are the same number of layers as there are frames. I believe there is an option in the animation palette for sending the frames to layers. Once you know that the frames and layers match (plus any additional layers you create), you can clear out the animation and reapply the layers to frames.
You should find a small icon in the upper right hand corner of the animation palette and the layers palette. Clicking them will bring up a menu that will do what you need.
Similar Messages
-
Need help with publishing as animated .gif
I'm having trouble publishing my project as an animated .gif. My project, which consists of two different animated movie clips, plays just fine when test it (Shift + Enter). But, when I go to publish it, the animations don't show up. The settings are exactly the same as with my other animated .gifs.
Any suggestions???
Thanks!If you try to 'publish' as an app, and you use the words ebook or just book, the review teams are likely to reject and tell you to do a book instead, so be prepared to not call it any type of book and to deliver something that showcases the device and iOS as best as you can if you take that route...it's non-trivial, mostly, so be prepared to learn any skills you may not have yet need going in.
Look at the book 'Yellow Submarine' for what I consider a good example of a standard epub w/m'media. it can be done, but as noted, iBA is iPad only, so....good luck. -
As we are having a problem explicit with Adobe Reader 11.0.07, we are interested in news and dates for coming updates to Adobe Reader. Can I find information about this anywhere ?
Hello Claus,
you could have a look here: http://helpx.adobe.com/security/products/flash-player/apsb14-13.html and in german language http://www.chip.de/downloads/Adobe-Reader_12998358.html
In all These cases Google could be "your friend".
Hans-Günter -
I have problem with recently with playing DVDs on my iMac. the problem only with DVDs, please anybody can help me solve this problem?
Get a lens cleaner disc. One with brushes and try that. CDs and DVDs use different lenses, so since CDs load and play, I strongly suspect a dirty lens.
-
ImageReady animated gif creation
Using ImageReady 7.0
I created an animated gif by putting a bunch of files named so they retained that order (1-29) into a folder and then did Import Folders as Frames. I then add times in the animation window for each frame and then save it optimized. I've always done it this way because it works and is fairly simple but I can't edit the file later and that's what I need help with.
The deals is, whenever I try to add an image or move layers all the frames end up being that layer in the animation window. All I want to do is add some new images to the end or maybe somewhere else in one of the animated gifs instead of going through the steps like before.
Can someone tell me how to do it or what I am doing wrong?
Thanks in advance!Its been a long time since I have used ImageReady, and then it was for about year when CS3 came out. So my memory if very rusty with that program. (In other words I am hoping that I am not too far off base, lol.)
Check and make sure there are the same number of layers as there are frames. I believe there is an option in the animation palette for sending the frames to layers. Once you know that the frames and layers match (plus any additional layers you create), you can clear out the animation and reapply the layers to frames.
You should find a small icon in the upper right hand corner of the animation palette and the layers palette. Clicking them will bring up a menu that will do what you need. -
Install failure due to "faulty DVD" problem: only with Family Pack?
After going through a few threads on the subject of installation failure due to tbe pseudo-faulty DVD, I have the impression that many users mention that they were using a Family Pack install DVD or in one case a "drop in". The former is my case. Please post if you have had this problem with Leopard install, and whether you were using a single licence, family pack or drop in. It's just a hunch, but perhaps this problem only affects a specific set of disks.
I believe that they are holding back on sending a new DVD until they know why there were defective ones. I read somewhere that they require a new SKU so that they will actually be a separate batch.
Can you borrow a DVD from anyone to install Leopard? You certainly would be allowed to legally do that. I am surmising that Apple is overloaded with requests for a replacement DVD and really want to make sure it works. You know that old thing about "fool me once..."
Stuff happens - but with Leopard, a lot of stuff sure happened at once. They sold 2 million DVDs. If only 5% have problems, that's a lot of problems to deal with, one at a time.
In time it will sort itself out, but in the meantime the rooms are full of smoke -
Problem printing with Adobe Acrobat X pro. No File Save As dialog
We have a C++ program to print a formatted report, by selecting the configured printers. "Adobe PDF" printer is available on install of Adobe Acrobat Pro.
During report print when "Adobe PDF" printer is selected, the report use to get printed in a PDF document & saves at the path provided by the User.
Internally it uses printer APIs like OnBeginPrinting, StartDoc, OnPrepareDC, StartPage, OnPrepareDC etc.
Report printing was working fine with Adobe Acrobat Pro 9.1. But since I installed Adobe Acrobat X pro (with update as 10.1.3) I am unable to print PDF document using "Adobe PDF" pinter.
StartDoc API does not pops up the "File Save As" dialog at all.
Any help in this regard, would be very useful.
Note: My code is working fine, if I use freeware like CutePrinter.
Thanks,
Amit AgrawalInteresting. My approach would
1. Try on a different system if available. If still bad...
2. Try to create a simple test application with CreateDC and StartDoc, and really nothing else not absolutely needed.
Test that. If it is good, look for other problems in your application (e.g. memory overwrite).
If your little example is still bad, post it here and other people can try and compare your results. -
I was hand coding my new website. This time i was trying to embed some personal fonts into my website, so i used a style sheet to embed which is coded like
"@font-face {
font-family:Sofia;
src:url(../fonts/Sofia-Regular.otf);
All the font work fine in the root folder of my site. But whenever i am creating dreamweaver templates and using them on pages which are in different folders but in the same root directory, the fonts are set back to default font. This problem is only with Firefox. Chrome, IE, Opera etc. works fine. Please Help!i run into the same problem the last days.
using bootstrap and the fontawesome iconfonts.
everythings fine with chrome an ie, but no fonticons with firefox...
found alot of solutions, but none of them worked.
then, using the webdeveloper console (i used firebug all the time before) i see the error why the webfont was not loaded:
[14:18:36.161] GET http://www.example.com/font/fontawesome-webfont.ttf?v=3.2.0 [HTTP/1.1 401 Authorization Required 21ms]
yes, the site is behind a '''htaccess''' login.
first load after login is => everything ok!
after following an internal link => no webfonts!
after disabeling the htaccess login, everything works fine!
but that can only be a workaround!
why firefox didnt recognize the login/authorization like chrome does?!
what todo if you have your site behind htaccess and want to use webfonts?! -
Pdf file opens only with Adobe Reader
I have a pdf file that I received that I can only view with Adobe reader. Every Mac application including Preview and every other one that should handle pdf shows a page that looks like a web page and says "Please wait" and some other stuff about if you are not redirected to your page you may not be able to open this type of file. Adobe reader (latest version) can open the file just fine.
Is there some reason why the Apple programs cannot open this file? Has Adobe done something to this file to lock out Apple software? Is there some incompatibility with the latest Adobe file version for pdfs?I have created the pdf files using txTextControl.ServerTextControl
The additional space after the "w" is a result of charaster spacing, there is no whitespace in pdf file after "w"
If i open the same pdf in some other pdf reader like Sumatra pdf reader, it gets opened without any white space after "w".
However, there is no space after the "w" in the PDF document, its the adobe reader issue. -
Problems printing with adobe while online
every time I attempt to print a pdf that I am looking at on the internet, adobe locks up the internet and will not print the pdf. If I save the pdf to my computer and then print it, there is no problem and it prints like normal. Can you help?
Hi msumoore,
What browser are you using? Does the same problem occur with different web browsers? When you do print from the web browser, are you using the print button that appears when you scroll over the bottom of the PDF?
Best,
Sara -
Premiere Pro CC import problem only with last .VOB file
When I import .VOB files from any DVD into Premiere Pro CC, the last .VOB always cut picture from both sides. When I click to see properties of the file (in Bin panel) it shows me that image size is 540 x 576 instead of 720 x 576. The video isn't shrunken but cut off. I got two black bars on both sides of the screen (in Premiere Pro CC). That wasn't happened with CS6 and now it happens always and only with last .VOB file. All other files from same VIDEO_TS folder are imported correctly. When I convert that last .VOB to .avi or any other format everything is OK. Any suggestions?
Yes it works, but I have no time to convert file every time I need something archived that way. I used that method years ago, and if I'm not wrong we are progressing a little Most of today options you have in Premiere 5 (maybe even in earlier versions; I'm using it from version 5.1) and it worked. So if you think like that, why we need version 7.2.1 ? Actually this is 14.2.1 version if you count from version 1 back in 1991.
It's not about to manage, it's about to have what you pay for, it's about to speed up the process.
Thank you anyway for your comment -
Airplay iphone problem only with music player
I have seen many discussions relaiting to airplay problems and now that I own both an iPhone 5s and a Bose Soundlink Air. I have discoverd there is possible a problem with Apples' software with the music player.
I have sucsessfully played music from itunes from three Macs in my house to the Bose SoundLink Air via wi-fi. All worked perfectly. I also used Remote from three iPhones, 3G, 3GS and 5S and again all worked fine. I have also used a radio app on each of the three phones and airplayed the radio direct to the Bose Soundlink Air and it all works perfectly.
However, when ever I play music (on the phone) direct to the Bose Soundlink Air, I get the usual complaining from other users of the sound plays for 20 seconds or so then cuts out etc. etc.
As mentioned above, if I play radio direct it works so why can't music (as its now called) on the iPhone. Seams to me the bug is in the music player that Apple has on the iPhone.
I might try another player (like VLC) and let you know if that works then we will know for sure the bug is with Apple.Okay, Spoke to Bose and explained the problem. He said that because the air play was dropping out with multiple iPhones then the problem was with the unit. He told me to return the speaker system, which I did.
So here's the interesting part...
I then purchased a set of Bose Computer speakers (cheap one's) and a new AirPort Express and found the same thing was happening, 'Airport drop outs'. So I swopped over the new AirPort for my old Airport Express and that has worked perfectly for the past half week.
So my conclusion which I have yet to discuss with my local Apple Store is the new AirPort products are not totally compatible with the old Airport products.
BTW I am using a 2nd gen Time Capsule to send out my wi-fi signal (may be time for an upgrade) but it works perfectly with all the rest of my old Apple stuff (and so far our new iPhone 5s's). -
Problem encountered with Adobe premiere Element 4 et DVD sony Handicam
I have a sony Handycam DCR/DVD203E . Window Vista edition familiale premium service pack 1 .Adobe Première Elements 4 .
I take 10 rushes of 2 minutes each . I finalised the DVD for importing it on my computer under Adobe Elements 4 .
When i do " add médias " , I only get two files , one called VTS_01_1.VOB which is the total of my 10 rushes but it's only one rush of 20 minutes .I get also an error message " C:\users\Videos\20081125\VIDEO_TS... FORMAT ERROR or file correupted/a component needed is may be not installed .
I shoud get my 10 rushes of 2 minutes instead of one rush of 20 minutes film .Just a few clarifications first. Rushes, are the quick (hence the name rush) optical prints made from cine negative film. Their intention is for viewing, quickly, the results of the previous day's filming. They are not color corrected, or manipulated in any way. They are also not edited, other than being spliced together, take after take, so the crew and decision-makers can see what was captured. These are usually discarded soon after selections are made and decisions are finalized. The original negatives are then cut in the editing process and, when complete, are printed to positive projection stock with color and density corrections. Now, the final output is more often some digital format for commercial distribution.
What we have are 2 min. Clips, in digital capture parlance. However, lets go back a moment to the first paragraph. Just like the negative film stock, this Sony camera shoots to DVD. Just like cine negative, with an editing workflow, something else has to be done. Unlike the negative film stock, the DVD can actually be viewed in an optically correct, albeit unedited, format.
The .VOB files on the DVD are part of the inherent file structure of that medium, the DVD-video and are made up of MPEG-2 (DVD-spec) compressed files with very specific criteria. Unfortunately, the aspects that go into creating an instantly viewable medium, add some problems to doing any editing with it - first there is the structure .VOB, next, the initial compression to MPEG-2. Neither is ideal, if one plans on using an NLE (Non-Linear Editing) workflow. The .VOB structure will have to be converted at some point, and the MPEG-2 compression will have to be decompressed into another format, and most likely, be re-compressed back to MPEG-2, if the final output will go to DVD. Substitute that second MPEG-2 re-compression with Flash, WMV, or whatever, should the intent be streaming media.
Steve has addressed the problem head-on, which is a good way to tackle it. This is intended to just add a bit, to what he has already written, not to correct anything, or change anything.
With the proliferation of more and more non-tape capture devices, i.e. cameras, on the market, one must make a conscious decision, as to what they will ultimately wish to do with the footage captured. While it CAN be edited, with certain limitations, it is first designed to be viewed in its raw form. It handles this last job well - just pop the DVD/mini-DVD into a player and view, or hook the camera directly to the TV (or through other devices attached to the TV) and view. Editing, however, becomes a bit more complex, and needs to be well-thought out, and planned for.
The FAQs, at the top of these pages, go a long way to helping make informed decisions, come editing time. The compromises are outlined pretty well. Yes, there
b WILL
be compromises, as the medium is not designed to be editable in the first place. It is a delivery/viewing medium. This should be a strong consideration, when shopping for a video, or still/video camera. What will I want to do with the material generated by that camera? Do I want to just record and view, or do I want to edit, before the final presentation of the material? If one is here, in the Adobe Premiere Elements (or Premiere Pro) forum, then it is likely that some editing is intended. If one has gone with a tape-based capture device, the editing path is clear - Capture, edit, Export. If one has gone with a HDD (hard drive), DVD, magnetic storage camera, decisions have to be made and some planning must go into the process of editing. Then is the time to learn the proper workflow (will differ dependant on the exact process of capture, that the device uses), and will pay dividends. Learning what compromises will have to be made and how best to keep these to a minimum, will be needed.
The ease, with which these non-tape devices capture the footage, does not belie what lies ahead, should one wish to later edit. They seem so simple - shoot, then view. However, there the simplicity ends. It is later editing, that must be heavily contemplated. These forums, and especially the FAQs (remember, they are at the top of the main pages) are a good place to learn what comes next. The simplicity quickly peels away and a lot of new techniques need to be learned. As Dorothy commented, were not in Kansas anymore, Toto... If one wishes to get good results from the editing of this type of material, they need to be ready to learn. This might also be an instance, where learning by reading (first), is far preferable to learning by doing. It is far less frustrating. One also needs to be ready to dig deeply into their toolbox, which might well contain a lot of extra programs, to accomplish the task, in the best manner. Even for tape-based editing, one can never have enough tools in that toolbox, i.e. 3rd party utilities and programs.
As an aside, I use PEs big brother, Premiere Pro, for my editing. However, I picked up PE as another tool in the process, as it does some things better than big brother does. Never be shy of using the right tools, even if it means that you have to go outside of PE and even Adobe.
Hunt -
The problem seems to happen when the battery is low. It seems fine now that the battery is fully charged. I took it to Apple Genius and they ran a diagnotic test and everything checke out fine. The tech told me to watch it and if it hapens again they would replace it. It is only a month old and we are already having problems with it. Does anyone know if there is a fix in the works or is the only fix to replace it?
Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
I have been using bullzip printer for years with Foxfire. I am now using a version 7_1_1_0_1218 of bullzip printer I downloaded in March 2011. I am using Windows Vista Service pak 2 with all latest updates.
ah..interesting. I found an alternate solution that works for
us at least
Our authentication is called from a file called
bluestemcookie.cfm with this format
<cflocation
url="https://#CGI.HTTP_HOST#/bluestem/lb_login.pl#AGREEMENT_PATH##CGI.SCRIPT_NAME#"
addtoken="No">
I was having the exact same problem, but notiece that if I
changed lb_login.pl to lb_login.pl? it now understood that
everything after was parameters and off it went to authenticate. Of
course then upon return I had a /? in my url and it burped again.
In looking at the construction of the URL to return in lb_login.pl
#---Construct Return URL------------------------------------
$ReturnURL = "https://$bluestem'R_ServerNamePort";
$ReturnURL .= $bluestem'R_PathInfo;
$ReturnURL .= "?$ENV{'QUERY_STRING'}" if
$ENV{'QUERY_STRING'};
I noticed the ? in the beginning fo the third string
concatenation. hmm.... removed that ? and now all our
authentication with IIS6 CFMX7.1 Win2K3 work fine. Just food for
thought as your solution appears to be better.
Maybe you are looking for
-
This is really frustrating - Over the last year I have been uploading all of my photos and occasional iPhone video to Aperture 3 (latest version all patches in place). Aperture would recognize the video, create a thumbnale and otherwise treat it n
-
Recently, when I hook up my iPhone to Sync, it goes thru and when it finishes I get the same message......The iPhone "......" cannot be syned. An unknown error occurred (13019). What am I doing wrong?
-
BASIC Auth and WSDL in WebLogic 7
I want to protect my web service URI with HTTP basic authentication. I've modified the web.xml and protected my web service URI and all works fine. However, this also protects the dynamically generated WSDL URL. Is there a way to pass the user/passwo
-
Upgraded to OSX Mountain Lion. "Contacts" groups are a mess.
I upgraded from OSX 10.6.8 to OSX 10.8.4. I did not think to back Contacts up and and my group email lists in Contacts are, for all intents and purposes, lost. I now have all kinds of information from other card files in the email lists and no way to
-
Mac pro running slow, rainbow all the time, can't repair disk
So about a week ago my mac pro was running fine as i worked for a few hrs. then all the sudden i was clicking through firefox and i got a rainbow, it lasted ten minutes and i couldn't close the program, when i tried to click anything else it froze as