Problems opening cs6 on pc w/ windows 7

I am not able to open trial version photoshop cs6 on pc with windows 7

I am not getting any error at all. It shows that it is installed but there is nowhere that I can open it to run. As for the specs, windows 7, 250gb hard drive raeodon graphics and for the rest I will have to look.

Similar Messages

Problems opening .pdf files created in Windows in MAC

My clients that are using Macs are having problems opening password protected PDFs that I created in Windows. Any suggestions?

Are your clients using Adobe Reader on Mac, or the built-in Mac OS Preview? Preview does NOT support the full PDF standard :(.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Mon, 26 Sep 2011 15:04:18 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Problems opening .pdf files created in Windows in MAC
Problems opening .pdf files created in Windows in MAC
created by Hollcy<http://forums.adobe.com/people/Hollcy> in PDF Language and Specifications - View the full discussion<http://forums.adobe.com/message/3939175#3939175

Problem opening excel file in new window

Hi,
I have a JSF application that sends an Excel file back to the user.
My backing bean has a method that uses POI to generate the excel file and then write it to the servlet response.
This works fine if I call the method from a command button, but this displays the file in the current browser window, whereas I want to open the file in a new window.
I added an onclick javascript call to a command button which does a window.open() to open a jsp in a new window. The jsp contains an empty view, as I'm using an on-load phase listener to make the call to my backing bean method which should send the excel file when the file opens.
However, when the window opens, I get an IE error message saying 'Could not open xxx.faces', and then an excel error message saying 'Could not open xxx.xls. This may be because the file does not exist, or the file is already open etc etc'
However, I found that if the popup window goes through a servlet (which just forwards to the jsp page) instead of going to the jsp directly, it works like a charm.
Any ideas or suggestions on how to fix this would be very much appreciated. If I can't fix it I'll just stick with the servlet approach, although it just seems a bit messy.
(I'm using IE6 SP2, tomcat 5.5 btw)
Cheers,
Stuart

I'm doing a similar thing, but I use commandLink to lauch the window. CommandLink has the "target" attribute that I set to _blank. As you would expect, that opens up the page in the new window.

Problem open CS6

why computer say error when I try to open CS6 design and web premium ???

Moved to the Downloading, Installing, Setting Up forum since you are using CS6 Design and Web Premium and not Creative Cloud. They will be able to help you here.
They will need more information:
Which operating system version are you using?
Which application is having an error when opened, or is it all of them?
What is the text of the error message or do you have a sceen shot?

Problem opening device from Java on Windows XP

Hi,
I am having trouble opening the TUN device (it is a virtual network device developed by the OpenVPN project - http://openvpn.net) from Java on Windows.
I found from the registry that the key for the device on my machine is
{5998ABF4-70CC-4B8C-9CBF-F2B985BAD4A2}.
From elsewhere on the web, I found that on Windows this device can be
addressed as \\.\{5998ABF4-70CC-4B8C-9CBF-F2B985BAD4A2}.tap
I then wrote up a short C code,
char *tun_dev_name = "\\\\.\\{5998ABF4-70CC-4B8C-9CBF-F2B985BAD4A2}.tap";
FILE *f = fopen(tun_dev_name, "rw");
fclose(f);
HANDLE h = CreateFile(tun_dev_name, GENERIC_WRITE | GENERIC_READ, 0, 0, \
OPEN_EXISTING, FILE_ATTRIBUTE_SYSTEM | FILE_FLAG_OVERLAPPED, 0);
CloseHandle(h);In the above code, the FILE* returned is non-NULL and the HANDLE returned is positive.
However, when I try to do the same in Java using the code below,
String tun_dev_name =
new String("\\\\.\\{5998ABF4-70CC-4B8C-9CBF-F2B985BAD4A2}.tap");
RandomAccessFile raf = new RandomAccessFile(tun_dev_name, "rw");
[]/code]
a "java.io.IOException: Invalid argument" is thrown. The same exception is thrown when I try to open either FileInputStream or FileOutputStream instead of RandomAccessFile.
In fact, when I invoke the above C code as a native method from within Java,
though a valid HANDLE is still returned, the FILE* returned is now NULL. I
have tried giving all permissions to my codebase using Java's policytool, but that didn't help. BTW, I ran all this code on Windows XP from cygwin.
Clearly this problem isn't with OpenVPN because I'm able to open the device using both fopen and CreateFile from C. Please let me know if one of you knows what the problem could be and what I need to do to fix it. In case, this is not the right forum for this question, kindly let me know which other forum I should pose this question on.
Thanks!
Harsha

I am sorry but looks like somehow some text got missed out from my message.
After the C code and before the Java code, I had intended to mention that when that C code is compiled and run independently, both the fopen and CreateFile calls work fine, with a non-NULL FILE* and a valid HANDLE being returned, respectively.
And as I have already mentioned, when I invoke the C code as a native method from within Java, the CreateFile still works but the fopen fails returning NULL.
Sorry for missing that out. Hope somebody will be able to help me out.
Thanks!
Harsha

Problem opening files stored in a windows server using kde/smblcient

i use archlinux64/kde 4.3.3 at work. my laptop is conneted to a network having a windows 2003 server. All the network shares(if i remember correctly are ntfs) are on this server, so i use the smb:// protocol through dolphin and konqueror(as far as i know smbclient is used on the background).
the server is full of pdf and doc files and my problem is that i cannot access these files directly, getting an error saying that it is not supported by the os, so every time i have to copy the file locally and then open it.
any suggestions to avoid copying the files locally?

mechmg93 wrote:
i want to avoid mounting my shares over fstab, because i use a laptop and there is no permanent network connection which makes the whole thing more complexed(order of daemons, when netfs should be started etc).
i read that a possible solutuon is changing the command of openoffice writer from oowriter %U to oowriter %f, which makes it copy the file to /tmp .
I cannot test it right now, cause im at home, but it seems that it may solve my problem.
As I mentioned in my previous post, you can set "noauto" in your fstab entries and mount selectively the shares you want with "sudo mount /share". That way you won't have to mess with daemons' order etc. The solution you found with openoffice reminds me of the problems I had with mplayer playing files through samba - I had to add a parameter like the one you post, but still I couldn't get it to work properly as the files had to get downloaded locally first. The only way to use my shares as local drives was to use the fstab.

Having problems opening photoshop 7.0 in windows 7

I installed photoshop 7.0 on Windows 7 (64 bit). When I try to open it I get the following prompt:" Could not initialize Photoshop, Scratch disks are full". I contacted Microsoft, they were not able to resolve the issue, they suggest I contact Adobe and get back to them, if problem is not resolved. Is there a fix for this problem?

try resetting your preferences by holding down shift-ctrl-alt while starting ps. you'll see a confirmation dialog if done correctly.
if that fails, use a hd less than 1 tb
if that fails, uninstall and reinstall using compatibility mode (with a compatibile os).

Problem Opening Composition in CS4 on Windows 7 (Worked in Vista) 32-Bit

Hello,
Merry Christmas! Hope everyone is having a better one than I am at the present time!
At little background information on what I have and what is happening.
My machine is a custom built machine with an ASUS P5KC Motherboard, Intel Quad Core Q6600 @ 2.40GHz, and 4.00GB DDR3 RAM, with a NVIDIA GeForce 8800 GTX.
Yesterday when I was working on this video, I had Windows Vista Home 32-bit installed. All fonts, footage, plug-ins, etc were there, working fine. The project had multiple compositions with quite a bit of 3D elements.
Somehow that machine got infected with a wicked little trojan; cleaned it enough to get my files off of there and make a backup.
I then installed Windows 7 Professional 32-bit, re-installed After Effects CS4, copied all of the Video Copilot Evolution footage, and Pro Scores, Designer Sound Effects, and Action Movies Essentials to the machine; installed the fonts and plugins again.
I then attempted to start After Effects and open the project; all was good -- it recognized that there was 53 items that were not found (unlinked footage). However, once it loaded and it started to load the last composition that I had open (which just so happened to be the fairly large one with 3D elements), it would simply freeze and become "not responding".
I tried this various times; no luck.
I then started a new project, and "drug" the existing project to the new one. This allowed me to open the project without it opening the previous composition. I was then able to re-link all footage and sounds. I then was able to open the other compositions, but the moment I tried to open the composition that I tried earlier, it froze again.
So then I thought, well maybe I can just render it, or make it a proxy, etc.
Both failed. Even when I add to render queue, as soon as it adds it, before I even click start rendering it will freeze.
I thought maybe this was a memory issue; I did some tricks to allow After Effects to use all of the memory, and all cores of the procesor, verify OpenGL state, and allow it to use 80% of the physical RAM on the video card -- still no luck.
I tried cleaning the project, and purging memory; no luck.
I can post the AEP project file for anyone who is willing to help.
Perhaps installing a 64-bit version of Windows 7 would help, but I don't understand what this issue is steamed from.
Thanks,
Travis

Situation Update:
Installed Windows 7 Professional x64 Bit, Adobe After Effects CS4. No improvement, still same issues. I then installed the 9.0.2 patch, and tried again -- same result, negative.
Response to Mylenium:
Thanks for the advice. It appears as if all devices have the latest drivers on my computer, and are running as they should. Not sure too much to check on After Effects, but it says everything is "Supported" in the OpenGL dialog on AE CS4.
Also, I'm able to render the main compsotion (which contains other comps in the beginning, and then middle way it has the problematic composition in the timeline) up until the point where the first frame of the problematic composition is.
I beleive it will aid in your assistance to me by seeing the actual project; please see the attachment.
Project number 2 is the initial project, where the "last thing opened" was the problematic composition. Project number 3 is the "new project" with the old project added.
You will see what I'm explaining once you take a look.
Additionaly Regarding QuickTime
I just recently downloaded the latest version of QuickTime Player (QuickTime Player 7, Version 7.6.5). It has installed, and I'm able to play MOV files that I have used in the composition. I'm unsure as to additional options to check within QuickTime.
Thanks,
Travis
Message was edited by: thowle (reason; added information about QuickTime version)

Problem opening ODBC data source in Windows 2003

I am having difficulty opening a ODBC data source in SQL
Server 2000 running on Windows 2003 using ColdFusion MX7 (it works
cleanly on the same database on windows 2000 server). Anyone has
any ideas.

Here it is, there is an issue with our Search functionality with the new SDN:
Symptom
When setting location on a Crystal Reports XI Report using the Progress OpenEdge ODBC Driver in Crystal Reports 2008 or Crystal Reports 2011 get “Some tables could not be replaced, as no match was found in the new data source. Please specify the table required for any unmodified tables.”
Environment
Crystal Reports 2008 or 2011
Progress OpenEdge ODBC Driver
Reproducing the Issue
Open a Crystal Report created in CR XI Report using the Progress OpenEdge ODBC Driver in Crystal Reports 2008 or 2011
Set location to a new ODBC Data Source
Get error "some tables could not be replaced, as no match was found in the new data source. Please specify the table required for any unmodified tables.”
Cause
Crystal Reports XI only creates aliases for tables with special characters or duplicate names.
Crystal Reports 2008 introduces a change which requires aliases for all tables.
Aliases are not created when doing a Set Location on the whole data source.
If a Customer has hundreds of reports they cannot set location of each table and fix the aliases.
Resolution
Upgrade to Crystal Reports 2011 Support Pack 02 or higher
Under registry key [HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Crystal Reports\Database\ODBC] create string UseTableNameAsAlias and set it to PGPRO1019.DLL, PGOE1022.DLL. Registry file is attached.
Keywords
Set Location
Progress ODBC
Crystal Reports 2008 2011

I can't open CS6 after installation on Windows 7. How do I do it?

I have downloaded the Cs6 trial version but cannot open it. I have browsed the net to fine program to do it but no program can be found. What do I do?

If you downloaded the trial version and the installer will not work, try to download it again. Please wait it takes a long time to download some of the suites. If that still doesn't work, please let us know what OS and which CS6 trial you are trying to install.

I am having problems opening pages in safari. the rotating wheel at the right end of the address window doesn't stop even after the page has filled up. then if i try to open other pages it gets stuck and won't open them.

I started having problems opening pages today. When first open a page it seems to download the page OK, but the rotating wheel on the right-hand end of the address field keeps rotating after the page is completely filled up. Then if I try to open other pages it becomes slower and eventually stops filling-in the pages, while the rotating wheel keeps rotating.
I wonder whether junk is being downloaded into my mac, or what is going on. Help will be geatly appreciated.

When was the last time you emptied the Safari cache?
From your Safari menu bar click Safari > Empty Cache
If that didn't make a difference, go back to the menu bar click Safari > Reset Safari. Select the top 5 boxes then click Reset.
And how much free space on the startup disk?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 15% free disk space. Freeing Up Hard Disk Space - Mac Guides
If emptying cache or resetting didn't help and there's enough free space on the startup disk, login to another user account, launch Safari. Same problems there indicates a system wide problem. Log back into your admin account so you can check the startup disk.
Launch Disk Utility. /Applications/Utilities
Select MacintoshHD in the panel on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If the startup disk needs repairing, follow the instructions for Using Disk Utility to verify or repair disks
I wonder whether junk is being downloaded into my mac
Nothing should "download" to your Mac unless you initiate the download yourself. You can check the Downloads folder from the Safari > Window menu or your Downloads folder in the Finder.

When I click on links in websites the links don't work unless I right click and choose open website in another tab/window. This is even a problem on the Firefox page.

When I try to open a link on any page/website Firefox does not open the link. It doesn't even "work" at opening the link, it just sits idling. I have to right click and choose "open link in new tab/window" in order for Firefox to open the link. It doesn't happen 100% of the time but happens especially if there is a button or picture that must be clicked. Simple text links seem to work more often then button or picture links. One example provided below. When you click on the "launch Jumpstart" button it will not open unless you right click & open new. This also happens from my Yahoo! Email account, on Facebook, Cructhfield.com and other websites with "button" related links.

I have the same problem but it appears that an add-on I'm using is causing the problem. Try opening Firefox in safe mode (which disables add-ons) Then try it. If that solves the problem, you need to disable all your add ons and enable them one by one to figure out which one(s) is causing the problem.
[http://www.chowins.com David Chowins]

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files?

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files? What can be done so that I can either open and see the layers or how can the sender save it in a way that it doesn't "merge" the layers in some way to just one?

Could try saving as tiff provided layers and transparency are chosen at the time of saving. But it's hard to give a definitive answer as it depends on the final usage. For example PSD's tend to work better in applications like In Design in comparison with tiff.

When I open a second Firefox browser window, the URL address window, instead of showing the URL, says "Go to a Web Site;" also, and more importantly, the "back" button is greyed out. This is a new problem, and the first Firefox window I open works fine.

After I open the first Firefox browser window, any additional window I open does not open my homepage, but opens a blank page with "New Tab" showing on the tab. An orange "Firefox" tab with a drop down arrow shows at the upper left hand corner of the screen. All of the options (File, Edit, etc.) are greyed out, however they will work if you move your cursor over them.
The URL address window says "Go to a Web Site". After I've gone to a website, the back button remains greyed out and I am not able to go back to a previous page. My RoboForm and Netcraft toolbars only show up in an abbreviate form. The add-on bar doesn't show up at all.
Again, this is a recent problem, and only happens after I've opened one browser window (which works fine) and then open additional browser windows (as few as one additional).

I had this same problem. Seems to be caused by the web developer tool bar FF extension (this started happening after a recent update to that extension). After disabling it, my FF is back to normal :)

Problem in opening excel file in different window

hi
i want to open excel file in different window it open in same window properly on the bases of condition but when i try to open in different with window.open( )
it give error that file has already used or path not exist OR requisted site either unavailable
how can i rectified

Hi.
I am too facing the same problem. I am using Jakarta Poi to display my resultset in an excel sheet directly(and not into a jsp)
The browser opens a window showing Open Save Cancel. If i click and save the excel sheet and then open, it opens. But clicking on Open directly doesnt open the excel sheet. Rather it gives the same error
The file name or path name does not exist.
The file you are trying to open is being used by another progrtam . close the document in other program and try again
The name of the work book your tring to save is the same as name of another document that is readonly .try saving workbook with different name
Can somebody please help me fix this problem, since its an urgent requirement. Mail me at [email protected]
Thanks
Hitesh

Problems opening cs6 on pc w/ windows 7

Similar Messages

Maybe you are looking for