Problems Opening Ultrabeat in Logic Pro X

Hey guys, I know this might be a dumb question but I just can't seem to find an answer. I can't seem to find out how to open Ultrabeat in Logic X like I was able to in Logic 9. Can someone tell me how to open it because it is becoming frustrating searching for it.
Thank you!!

Hi Moff,
It's in the same place as all the other Apple AU instruments.
If you look at the track inspector section of your instrument track (via clicking the the big i at top left) you will see a slot for "instrument" between Audio and MIDI effects slots. Click the little arrows (or the word instrument) and a list will appear. It's in that list about 2/3 of the way down.
That's it!
best
jake

Similar Messages

'You can't open the application "Logic Pro X" because someone else is using it.'

Hello.
I have two user accounts on my MacBook and if I attempt to open Logic Pro X in ‘user 2’ while it is already open in ‘user 1’, I get ‘You can’t open the application “Logic Pro X” because someone else is using it.’
Now I know I can simply quit Logic in ‘user 2’ but this shouldn’t be happening should it? Any ideas anyone? Thanks.

Really? I wouldn't have expected that. Well, I may be wrong then and basing my assertion on a much older Mac OS (10.5?), since I haven't used multiple open user accounts for years.
However, seeing the wording of the message it is quite obvious that this is by design.
I think it is better to have as few programs as possible open anyway, just so Logic can use all available CPU and RAM resources optimally. Maybe if you have 16 GB or more that is not so important anymore.

New bug in Ultrabeat into Logic Pro 8.0.1

Hey guys check this... a brand new bug (hope it would be only my mac, but with 8.0.0 there wasn't)
so open ultrabeat, choose the preset called Drag & drop samples under Drum Kits.
(just to use one free preset)
load a file and record something, then press play in order to listen your drum and try to load an other sample to make comparison (example: load a kick, do a 4/4 drum, try to replace the kick with an other sample and check the Preview sample in ultrabeat to try comparison... )
after this update no more Preview sample in ultrabeat voice (and than note will stop on playing when u try that function
sorry for the english

finally i find someone else with the same prob, o already post into apple.com too
yes here the same, bug new in 8.0.1, cause on logic 8.0.0 all works fine (except some click noise when you pre-listen a file in autoloop)
however here what i can say to you (it's 3 days i'm studyng this cause i make a massive use of ultrabeat)
- no matter both power pc / intel soffer of this bug
- i try to update to leopard from my 10.4.11 (same bug) tryin a new os installation (same bug), tryn without audio card and driver (same bug)
so i really don't know how to solve it, cause there are only few people that have this problem
big mistake and big mistery

Mainstage Ultrabeat into Logic Pro 8?

Hi,
Does anyone know how I could Export a Mainstage "Ultrabeat" (not just a loop but say a five minute improvision jam) into Logic Pro 8, so I could improvise over it in Logic Pro 8? Especially the rhythm combinations. Thanks!

I think you can use something like Soundflower to route audio from one app into another.
You can always just open the same UB channel strip setting in Logic and do everything in there that you would do in Mainstage.

Open sessions in Logic Pro by (default) instead of logic express

Hello , I just upgraded from logic express 7.2 to logic Pro 7.2 and my sessions are still opening in logic express as the default app. Is there any way to have them open in logic pro automatically?

thanx alot , that did it .Im glad I joined and
posted because I was about to delete the Logic
express app . but thanx again for the reply and
hospitality .
CB, Hi, I am thinking of doing the same upgrade as yourself. Now that you have the answer to your problem, is the 'transfer' of songs from Express to Pro 'seamless'. I.e. I take it that there are no problems transferring work done in Express to Pro? Like yourself, I am a relative newcomer to this forum etc

Ultrabeat in Logic Pro X is missing drum kits

Hi,
So recently, I got Logic Pro X because I've been meaning to try producing house music with it. I was introduced to Ultrabeat in some tutorials saying to click the dropdown menu (at the top) and select 01 drum kits and choose Trance Kit 02. However, when I click the dropdown menu, I seem to only have 8 samples in the drum kit and none of them sound good at all. Why do I have only 8? I've seen other discussions where people have up to 25+, is this something that I can download from the additonal content? And if so, what is it called?
Many Thanks!
MChen.

Try Drum Machine
....and also the Logic Studio 2 Compatibility Sounds and Instruments found under the Legacy entry.... along with the GB 11 Sounds and instruments.. and finally the Instruments found under Jam pack 1, Jam Pack Remix and Jam Pack Rhythm,
Also make sure the Essential Sounds and Instruments set has downloaded completely too...
Personally, if you have the space, I'd download all the content... as there is so much on offer for free... that you may find useful in the future.

How to open kontakt in logic pro 9 on lion os

How to open kontakt player in logic pro 9 on lion osx...???
I have installed the player but it doesnt show up in logic..
what do i do??

Hi
Assuming that you are looking for Kontakt Player in the right place (Click hold the I/O slot on an instrument channel), and it is not there???
Go to Logic Pro:Preferences:Audio Unit Manager, and see if it is listed in there
Make sure you have installed the latest version of KP
CCT

PROBLEMS WITH LOOPS ON LOGIC PRO 9- PLEASE HELP

I'm messing around the loop Browser. Actually I am getting quite good at it. Even starting doing my personal loops... but there's something in the organization that I don't understand.
I need to make my personal folders with my loops AND I need to get rid of some redundant loops OR change some names but the system won't let me do that.
It just let me put my new loops. They would show up as a bulk in "my Loops" and that's it:
1) Redundant loops don't appear anyway. (except in the browser) and I looked on
Library/Audio/Apple Loops
Library/Application Support/Logic/Apple Loops
Library/Application Support/GarageBand/Apple Loops
Users/"You"/Library/Audio/Apple Loops
Users/"You"/Library/Application Support/Logic/Apple Loops
Users/"You"/Library/Application Support/GarageBand/Apple Loops
2) I organized my loops with dedicated folders but they wouldn't show up in the browser... And I did re-index the Lybrary...
3) Same when I try changing names...
Anyone could help me with this matter? should I may be reinstall Logic again? My current computer was installed from a backup after the other one was stolen... just saying
Thanks in advance
Fran

Are you using Logic Pro 9.1.8 which is the only version of LP9 that is fully compatible with Mavericks?
Also, did you let LP9 rescan the plugins.. If you are not sure... open the Audio Units Manager found under preferences in LP9's menu bar...and see if any of your missing plugins are listed there..
If not, quit LP9, delete the AudioUnit cache and launch LP9 again so it does a full rescan...
http://support.apple.com/kb/TS1086?viewlocale=en_US&locale=en_US
(This is for LP8 but it works the same in LP9)

Probleme beim Starten von Logic Pro 9

Bei jedem Startversuch von Logic Pro 9 startet automatisch der Download "Download von grundlegendem Inhalt".
Sobald dieser abgeschlossen ist schliesst das Programm und bei einem Neustart, startet wieder der automatische Download.
Kann mir jemand weiter helfen?
Danke.

Ich glaube, da kann nur der technische Support helfen, da es sich hierbeium Fragen der Aktivierung und Lizenzierung handelt.

Opening plug in logic pro

hi,
I used to use cubase with a pc and am finding logic 9 pro a bit confusing on mac.
I need to know how to open my stylus rmx plug in in logic...
Any help is appreciated ..
thank you
Keith

Please go through the small 'Exploring Logic" manual, which walks you through these really basic things. You are going to need to know the basics if you are ever going to have any success using Logic (or any application).
Create a software instrument track, and in the "Input" slot in the channels strip, all installed third-party plugins are available to assign as that channel's input.

Problem openning Safari on Macbook Pro

Hi, When I try to open Safari on my Macbook Pro it wont open and I got the following message: Safari cannot open the web page http://é.%3e/%3E//%3E. Anyone has an idea what I should do to restaure Safari ?
Thank you,
Dendroica

Hi...
Go to ~/Library/Safari
For Lion v10.7x: To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library
Move the History.plist and the LastSession.plist files to the Trash.
Try Safari.

Help with Ultrabeat in Logic Pro 8

A couple of things I want to learn/be able to do in Ultrabeat
Customizing drum kits - what I mean by this is, I want to be able to freely pick desired drum sounds from the multitude of logic libraries, mixing and matching them in the ultrabeat sampler. Like say taking a kick drum from one kit and a snap from another, and building up my own custom kit in the process.
Assigning specific drum sounds in ultrabeat to desired midi controller pads - say assigning a kick drum to a pad on my midi controller and a snare to another, etc (this would actually be useful for just sounds in general).... I have a axiom 25.

Discipline Wali wrote:
A couple of things I want to learn/be able to do in Ultrabeat
Customizing drum kits - what I mean by this is, I want to be able to freely pick desired drum sounds from the multitude of logic libraries, mixing and matching them in the ultrabeat sampler. Like say taking a kick drum from one kit and a snap from another, and building up my own custom kit in the process.
Each voice in ultrabeat can hold a sample in OSC1. Drag a sample or audio file into the sample area.
Or use the import button to choose a preset Kit. Then click the arrow next to import and click on a sound in the list to audition it. Then drag it onto the voice (on the left assignment area) you want.
Assigning specific drum sounds in ultrabeat to desired midi controller pads - say assigning a kick drum to a pad on my midi controller and a snare to another, etc (this would actually be useful for just sounds in general).... I have a axiom 25.
What BeeJay says!
good tutorial on Ultrabeat over at -
http://www.macprovideo.com/tutorial/logic9204
current offer there is 20% off downloads or subscription -
http://www.macprovideo.com/summerstartersale10
they seem to be in summery mood!
JG

HT3989 The patch is from an older version of MainStage. Open the patch in MainStage 3 or later, export it again, then open it in Logic Pro.

this problem loading from the library.
cannot find help anywhere on the net

I'd like to see a comparison with say CS2. I tend think that your current software might run marginally faster. I warn you against going to CS6, as it seems to have higher computing overhead thus far, and there has been some issue with DV editors connecting to dv devices. I don't see where it could help your dv workflow very much.
But Dude.....,Pentium D, 3.60GHz? You could build a new PC funded solely by the electricity that you would save over 18 months. Combine that with savings from not upgrading to CS6 and join us all here in modern computing land. Editing HD natively (It will happen for you) without rendering previews, exporting to DVD and mp4 in minutes instead of hours. It is so worth it. Is this your work's or your church's system where its just not your choice to upgrade? Here at work we were finally able to upgrade to CS5 capable systems 2 years ago, and HD material had already become a big workflow issue with us, even though we were primarily working with DV. I also had to upgrade my home system to take on any freelance editing. You can rock with any modern i5 or i7 quad core, 12gb memory, and a gtx card. You could also get and AMD 6 or 8 core and maybe save a little $ there.
I just wouldn't ever consider upgrading the software before that rig.

Logic Pro, Apple Loops, and Restoring from Time Machine

I recently had to restore my Mac from a Time Machine backup, and like most things touched by Apple, the restoration worked flawlessly for all my stuff, with a few exceptions. Some 3rd party apps I use had problems with file permissions but most of it was quickly sorted out in under half an hour.
However, Logic Pro refuses to see the Apple Loops I have installed on my system. My Loops are stored in two folders at the following locations:
/Library/Audio/Apple Loops/Apple/Apple Loops for Soundtrack/
/Library/Audio/Apple Loops/Apple/Apple Loops for Soundtrack Pro/
GarageBand has no problem seeing these, but Logic Pro can't find them, and won't let me show it where they are. The Apple Loop Utility found them alright, although I did have to show it where the files were kept. Any idea what's wrong?

You may need to rebuild the loops index.
Open up Logic and display the Loops Browser
Open up FInder and locate the folder containing the loops as you describe
Drag the loops folders onto the Loops Browser
That will rebuild the index and all should be well.
Pete

Need some help with strange sounds in Logic Pro 8

Hi!
I need some help with a problem I have in Logic Pro 8.
When I have arrange window open, suddley strange high tones starts to make noise in my headphones. I don't know where these sounds comes from or why, but I need some help to get them away. Should I just try to contact Apple?
Martin

Hi Martin
Welcome to the forum. Give everyone here some more info about your set up otherwise it may be difficult to figure out what is wrong.
Which mac?
Which OS?
any hardware devices?
if you are listening through headphones using the built in audio from the mac, you may be hearing fan noise or a hard drive spin noise.
Don

Problems Opening Ultrabeat in Logic Pro X

Similar Messages

Maybe you are looking for