Problems pairing with Garmin660

after applying the latest updates to the phone our garmin nuvi660 keeps dropping bluetooth connection the the iphone. has anyone else had the same issue? is there a fix out there?

http://discussions.apple.com/thread.jspa?threadID=1344855&tstart=15

Similar Messages

  • Problem pairing with bluetooth and Mi Band Device.

    Hi, I have problem pairing my Iphone 5 to a my Mi Band device. After turning on my Bluetooth in the setting page, my iPhone just keep on goes into searching mode and does not detach anything. Please help. thanks

    The hardware certification requirements for 2.2 are pretty strict and the Ziio doesn't meet them, but they're opened up for 2.3. If the Ziio gets the android market, it will have to be running 2.3.
    Will the Ziio be upgraded to run on 2.3? It's possible, but up to Creative. That said, my hope is that most compatibility issues are addressed with 2.2. The only things I missed were Skype and Flash, and that should be fixed with 2.2.
    And now that I can update my Rhapsody software, kindle app, and shop for a few games on the Amazon market, 2.3 isn't that big of a deal for me.

  • Problems Pairing with Garmin Nuvi 265W

    Bought a new Garmin Nuvi 265W GPS. Set the unit up. It paired immediately with iPhone and worked without issue. Then as a last step in the setup I registered the Nuvi with Garmin. Big mistake. During the registration Garmin wrote something to the Nuvi and toasted the iPhone pairing. Unit goes into an on/off do loop. Resetting and restoring doesn't help. Unpaired the iPhone and deleted it from the Nuvi so at least it's back working. Garmin doesn't know why what they write during the registration process causes the problem and said there is no way to go back. I've got V2.2 on my iPhone. Anybody have a similar problem and know of a work around to get the pairing to work again?

    I bought a Garmin 265WT recently and could pair my iPhone 1st generation to the unit but it would constantly reboot the Garmin unit. After reading all the support forums and upgrading to the latest software releases on both my iPhone and Garmin 265WT
    I could not get the problem resolved running the below software/firmware:
    iPhone 2.2 and 2.2.1
    Garmin 4.8 with Bluetooth Firmware 1.7
    I finally called Garmin and they shipped me another unit. The new unit worked without any problems even with older software and firmware. Seems as if the reboot problem might be more than just software and firmware related.
    My iphone at this point is running 2.2.1 but the below software and firmware revisions of the new Garmin 265WT worked:
    The new unit came with software:
    Software Version 4.40
    GPS SW Version 2.38b
    Bluetooth SW Version 1.65
    This worked no problem with bluetooth. No reboots....
    I even upgraded to:
    Software Version 5.0
    Bluetooth SW Version 1.7
    The unit still worked no problem. I can only suspect the issue here is hardware related in some cases. So for some people the upgraded software/firmware may work. But if you are running both iPhone 2.2.1 (1st Gen Phone) and the latest software and Bluetooth firmware and still have the problem I would call Garmin and have them replace the unit.

  • Is anyone having a problem pairing with a BMW?

    Does anyone have any advice for pairing with a 2011 BMW? Ever since I updated my 4S to IOS6.0 I can't seem to pair with my car.  At first it couldn't load phone book data. Now it won't pair at all.  I had BMW look at the problem but their diagnostics showed nothing abnormal. 
    Thanks

    Sorry about my english. I'm from Germany and I have the same problem. The problem is, that iOS6.0 is the newest technology and the software of your BMW isn't. Your BMW dealer must update the software if possible. And maybe everthing will work again. On time my dealer try it on my BMW 330Xd 2010. Hope, that everything wil work!

  • Problems pairing with Garmin Nuvi 1310 sat nav

    I have been trying to connect to a Garmin Nuvi 1310 sat nav. It set up first time, however when I switch off the sat nav and then turn it back on my phone will not connect automatically. I have to remove it from the list on the Garmin and start all over again. Surely this can't be right, my old iPhone re-connected automatically everytime. Is there a setting I need to adjust?

    I bought a Garmin 265WT recently and could pair my iPhone 1st generation to the unit but it would constantly reboot the Garmin unit. After reading all the support forums and upgrading to the latest software releases on both my iPhone and Garmin 265WT
    I could not get the problem resolved running the below software/firmware:
    iPhone 2.2 and 2.2.1
    Garmin 4.8 with Bluetooth Firmware 1.7
    I finally called Garmin and they shipped me another unit. The new unit worked without any problems even with older software and firmware. Seems as if the reboot problem might be more than just software and firmware related.
    My iphone at this point is running 2.2.1 but the below software and firmware revisions of the new Garmin 265WT worked:
    The new unit came with software:
    Software Version 4.40
    GPS SW Version 2.38b
    Bluetooth SW Version 1.65
    This worked no problem with bluetooth. No reboots....
    I even upgraded to:
    Software Version 5.0
    Bluetooth SW Version 1.7
    The unit still worked no problem. I can only suspect the issue here is hardware related in some cases. So for some people the upgraded software/firmware may work. But if you are running both iPhone 2.2.1 (1st Gen Phone) and the latest software and Bluetooth firmware and still have the problem I would call Garmin and have them replace the unit.

  • Problems pairing with Parrot 3200LS hands-free

    My phone was pairing just fine for two months. Then it stopped connection with my Parrot 3200LS. I have tried deleting from the phone and the Parrot. I have re-paired numerous times and I can get the connection initially to work, but when I re-enter my car it won't connect. I have checked the software update and am really getting frustrated. Does anyone have any suggestions? I don't know if it is my phone or the Parrot device. When I look at the bluetooth settings on my phone it looks like it is constantly searching. It does recognize the Parrot 3200 and when I select the device it will sometimes connect and sometimes it will say connection failed. I shouldn't have to manually connect when I get in my car. Any help would be appreciated. I have also sent a question to Parrot and am waiting for a response.

    See if any of these results are of any help = known issue apparently
    can't connect iphone 6 to 2008 Honda Accord blu... | Apple Support ...
    discussions.apple.com › Support › Apple Support Communities
    Apple Inc. 
    56 mins ago - ritalot Apr 15, 2015 3:37 PM. Cannot connect iphone6 to bluetooth on 2008 Honda Accord. iPhone 6, iOS 8.3. I have this question too Show 0 ... 
    Since I switched to my iPhone 6 plus my Honda C...Dec 28, 2014 
    Car Bluetooth Connectivity Issue with iPhone 6Sep 21, 2014
    iPhone and 2009 Honda Accord Bluetooth issuesJul 31, 2011
    Honda Accord 2008 iPhone pairing problemJan 17, 2009
    More results from discussions.apple.com

  • Apple keyboard not pairing with iMac

    My wireless keyboard was working fine just until 2 weeks ago when I went out of town for a couple of weeks (and it has worked fine for over 2 years now).  Now it is giving me problems pairing with my iMac.  I've gone through all the support discussions and I've tried everything. 
    I uncoupled the device from the computer because it was not connecting and have tried connecting it ever since and nothing seems to work.  The computer seems to "find" the keyboard but won't connect to it.
    I have pushed down the power button the entire time during pairing process as suggested by some people with the problem on the discussion boards and that doesn't do it either.   While occasionally the computer will see the keyboard, it just does not seem to want to connect to it.  The green light comes on for a bit when I hold the power key down (or even when I just push it once) and then goes off.  It never blinks i.e. it doesn't seem like it's going into pairing mode at all.
    This is really confounding.  Any help would be greatly greatly appreciated.  I'm already 3 hours in the whole trying to fix this.

    Thanks Barry.
    I had already deleted the KB from the bluetooth preferences and it was discoverable, so no idea why it wasn't working.
    However, eventually what ended up working was that I turned the iMac off, I took the keyboard to work (i.e. away from anywhere near the iMac's vicinity) and then when I brought it back at the end of the day, the green light suddenly started blinking again and the iMac discovered the KB.   I don't know how these things are designed but apparently, you need to take the KB out of the range of the device it was formerly paired with EVEN IF you have deleted the device from the bluetooth preferences.  Otherwise, somehow, the pairing is still remembered and the device is not recognized.
    If this happens again, next time, I'll try your reset SMC suggestion.  thanks for your help.

  • N900 won't pair with Windows 7 PC

    Has the bluetooth on the N900 been fully implemented yet? My E90 has no problems connecting with connecting to my Windows 7 computer, but the N900 times out with error code 0x80004005. The N900 and the E90 have no problems pairing with each other. I'm using a Broadcom 2046 based dongle with the latest drivers.

    I have the Same problem with Windows 7 not seing the N900. Come up with driver error. Have no problems in pairing other bluetooth devicessuch as headset, gps reciever, N78 phone.
    Also when Paring, when Using Numbers, It display the lower case characters even holding the Bue Arrow for normal use with numbers. I had to hold down the White up arrow when pressing the Number key to display the number characters.

  • BT pairing with Garmin Nuvi 2310

    Hi everyone
    BB Curve 8520 v5.0.01036 - BT v1.1
    Garmin Nuvi 2310 - BT v5
    This is my first BB, I wish I bought one years ago.  Its great.
    I do have a problem pairing with my satnav.  The satnav turns off once the connection is made.  I have read other posts but nothing refers to the Curve 8520.
    One post said the the different versions of BT could be the problem?  I have emailed Garmin to see if they can supply an older version of their firmware for BT.  Does anyone know if the BT version can be updated on the BB?  Both the Garmin and BB have been updated using their software/websites.
    Any help on this is appreciated, Allan.

    I have a new 8520 and a Nuvi 660 which I've had a couple of years. Paired easily with no problem IRO using the Nuvi as a handsfree device in the car.
    The Nuvi is running BT sw 3.4. and the BB same as yours.
    Hers's a link to a suggested fix
    http://tinyurl.com/5ufnkey
    Scroll down to the post from phredd 22/01/08
    It may need modification for your devices.
    Blackberry Best Advice - Back-up weekly
    If I have helped you please check the "Kudos" star on the right >>>>

  • Problem remebering bluetooth pairing with 09 Saab (Gm blue tooth)

    I have a 09 saab 9-3, and the car has built in blue tooth. The problem is when i pair the phone it works while the car stays on that whole time. The minuet i turn the car off and try to come back into the car it will not reconnect. If you go to setting and blue tooth and try to tap the correct device it still wont reconnect. The only way to get my GM Blue tooth and my Apple iphone to work is to pair it every time i sit in the car and that just isn't feasible!

    1.   Click the Manage Connections icon on your Home screen
    2.   First, verify that the Bluetooth technology is turned On
    3.   Then select Set Up Bluetooth
    4.   Click Search to find other devices or Listen to allow your BlackBerry smartphone to be discovered by other Bluetooth devices
    5.   Click on the device you would like to pair with and enter the Numeric Passkey if required
    6.   Click Yes
    7.   To connect to a paired device, click the Options icon on the Home screen
    8.   Select Bluetooth
    9.   Click on a Bluetooth enabled device and select Connect
    Make sure your headset is also in discoverable mode. Instructions should be included in it's user manual. If this does not work, then I would assume a compatibility issue.
    Disclaimer: I'm just a regular user like the rest of you. I have spent a lot of time learning the limitations of the Blackberries to know how to fix most problems. If I have suggested a fix, please give a kudo and mark as a solution!

  • Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

    Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

    What's more, they don't even show on the bluetooth devices list..

  • My Magic Mouse (wireless) paired with my 2010 iMac: Often at startup the cursur just sits in top left corner of screen, frozen.  Not a battery problem.  New.  I take batteries out, reboot (a real pain)... then ok.  HELP!

    My Magic Mouse (wireless) paired with my 2010 iMac: Often at startup the cursur just sits in top left corner of screen, frozen.  Not a battery problem.  New.  I take batteries out, reboot (a real pain)... then ok.  HELP!

    Hello:
    Try resetting the PRAM and SMC.
    Barry

  • HT201205 How can I keep my phone paired with my car after I leave car?  My 4 had no problem

    I just replaced my iPhone 4 with a 5s.  It pairs with my car and when I leave my car, it uu-pairs.  My 4 did not have this problem.
    I don't want to have to pair my phone everytime I get in the car.

    What do you mean by "unpairs"?
    Do you mean your iPhone forgets it was ever paired to your car?
    Or do you mean your iPhone drops its connection to your car (which it should certainly do)?
    If you mean it forgets it was ever paired, try Settings > General > Reset > Reset Network Settings.  Then pair your iPhone to your car what will hopefully be one last time.

  • Pairing with problems with car radio system

    Hi
    I have a Blackberry 8700 which I need to pair with the Radio in a Land Rover Freelander 2 (same for Jaguar, Volvo and some other Ford based Radios). It would not connect at all and I was advised to download an applet from Blackberry and it does now connect but I don't get the phone numbers/ contacts/ call logs to transfer. The O/S version is 4.2.1.94. Does anyone know how to get full functionality. Frustratingly it fully connects with my portable Garmin Sat Nav. I know car radios are not always the most flexible things but it is really frustrating as otherwise the hands free calls are fine.
    Hope someone can help
    Grumpy

    I also have the same problem with an 8900 and Land Rover Freelander.
    Is this a bug with the Blackberry OS?
    Can someone help?
    Also Gumpy.....

  • Why won't my iPhone 6 pair with my car? My iPhone 4 and 5 had no problems.

    Why won't my iPhone 6 pair with my car? My iPhone 4 and 5 had no problems.

    Start with these suggestions
    iOS: Troubleshooting Bluetooth connections - Apple Support
    always worth clearing all pairings from vehicle end and resetting network settings on iPhone  as explained in the doc

Maybe you are looking for

  • Can no longer access same network.

    i first noticed that i cant no longer access a private netweork that i used to be able to access. except that sometimes i can. also, with this network and many others, i.e. panera or my home network, borwser errors tell me i am not connected ( safari

  • Table problem

    hi, I have a requirement where i have 2 columns in a table .. one should be read only and the other should be edittable... so i have inserted two cell editors of input field type..and made one as read only and the other one not read only. but wen i r

  • Linking UDF to GL Account

    Hi all I have a UDF for which i want the amount to be accounted in one of the GL Accounts. How do i link the  UDF to a GL Account? Regards, Rohan S. Kamble.

  • Leading & Non Leading Issue

    Dear Experts, Can you pleases help me understand the concept of Sub Ledgers. We have 2 Co codes . One is of country US the co code is (US01) & another is of India (IN01) US01 Co Code is using leading Ledger. & IN01 is using non leading leader (L4) In

  • Loupe Offline for Referenced Images?

    In the Aperture 3 documentation, we get this... Even though the masters are offline, you can browse, search, and assign metadata to preview images. You can even use the Loupe to zoom in on preview images, because they are high-quality JPEG files. And