Problems playing dvds on my new mac mini

I'm trying to play a dvd on my new mac mini & whenever I hit the play button I get error: -70025. I've checked the disc for scratches etc... but all seems fine there. Does anyone know what that error is about or have any suggestions as to what I might be doing wrong?

All i can think of is running a cleaning disk in your Mini's drive. I'd be surprised if the mini needed cleaning since it's so new but you never know. Another question that comes to mind is if that particular DVD has some copy protection that prevents it from being played in computers. Some music CDs have that type of protection.

Similar Messages

  • Problem with USB speakers and new Mac Mini

    I have a USB sound system consisting of a pair of Harman Kardon soundsticks and a woofer from probably 10 years ago (bought and used originally with a Mac). I have tried driving it my new Mac Mini. It works fine for about a minute; then the music stops. Here's what I've tried to diagnose the problem:
    1. The problem does not occur when these speakers are driven from my Macbook Air (about 3 years old).
    2. The OS and iTunes software is up to date on both machines (10.9.5 and 12.0.1.26).
    3. It does not depend on which USB port I use on the Mac Mini.
    4. Using a port on a USB extender on the Mac Mini does not solve the problem.
    5. The iTunes Preference settings are the same on both machines.

    Sorry, no actual experience with USB Audio devices.
    I found this in the Pro forum, but the outlook doesn't seem good:
    http://discussions.apple.com/thread.jspa?messageID=1739084&#1739084

  • Where's the DVD on the new Mac mini?

    I'm all for going digital, but killing the CD/DVD drive in the new 2011 Mac Mini at this point is insane!
    I had an old 2009 Mac Mini used as a media center/ living room PC and was looking forward to upgrading it, but alas Apple won't be getting my cash now.
    I have over 200 DVD films - how on earth am I supposed to play those now?
    And please don't tell me to use iTunes cause I am not about to re-purchase digital copies of all my DVDs all over again.
    And no buying an external DVD drive is not a solution either - it totally kills the one piece design of the Mini...
    Sad, sad move. At least you could have made it an optional build to order extra.

    I'm in luck, I think.  I have a Belkin hub made to sit under a Mini.  It came with an optional power supply.
    A USB hub still may only provide 500mA.  It's up to the hub manufacturer whether they want to go "over spec."  IOW, still no guarantee.
    How about using a powered SATA/USB adapter with a SATA internal drive?  Would that work with a Mini?
    It depends on the adapter.  Some SATA-to-USB adapters have a power supply that only powers the SATA adapter.  Most good quality external drive enclosures will supply power to the SATA drive as well, so no issue with USB supplied power.  As far as the Mac is concerned, it's a USB drive.  The Mac doesn't care how you got the drive to connect to USB.
    IOW, don't go cheap.  But if you're going through the trouble of building such a drive with an adapter, you've probably spent as much money as just buying a pre-built external drive, or even the Apple drive, which will then have support from Apple.  (e.g.: you have trouble in the future and you have Apple techs blaming the 3rd party drive and the drive techs blaming the adapter and the adapter techs blaming the drive.  With the Apple drive, you only have to deal with Apple techs blaming themselves.  )

  • HD Flash Video does not play smoothly on brand new Mac Mini

    I just bought a new Apple Mac Mini (2.5GHz model with discrete 256Mb AMD Radeon HD 6630M graphics card, OS X 10.7.3). One thing I bought it for was watching HD video on the BBC iPlayer site here in the UK, but I found that it won't play it smoothly. It drops frames, particularly noticable as the camera pans. I'm using Safari and the current 11.1 Flash Player, but I've tried the latest release candidate too (11,2,202,221). The videos are 720p 50Hz, H.264 encoded, 3.2 Mbps, and use 80% - 100% CPU, so it seems to me that I don't have hardware acceleration. Enabling or disabling hardware accleration doesn't seem to make a difference.
    I'd like to test it with other HD H.264 Flash videos, but I can't find any. Can anyone point me to some?

    Not all video will have full hardware acceleration (stage video) enabled.  Can you try the following link?
    http://youtu.be/SHZFsJKlsuA?hd=1
    I just gave this a try with Chrome on my Macbook Pro (15", mid 2010) and Flash used between 8% - 25% cpu, the average being somewhere below 15%.
    Chris

  • Problems with system sleep on new Mac Mini

    Hi,
    I recently upgraded to the latest Mac Mini & have a problem where the Mac goes to sleep whenever I switch off the display. This is a problem as I have file conversions and a Mozy backup running that I want to run while the screen is off.
    I've set the Energy Saver settings to "Never" on both sliders, and I have tried the "MacPilot", "Jiggler" and "Caffine" apps, but none of them prevent the system sleep.
    Does anybody have a way to prevent system sleep when the screen has been switched off?
    Thanks,
    Andy

    are you using an apple display?
    you could just sleep the display. goto system preferences desktop and screen saver. then click on screen saver. then to hot corners and configure a hot corner to sleep the display.
    Then just mouse to that corner and the display instantly sleeps.
    Some sleep issues can be fixed by resetting the SMC
    Intel-based iMac, Intel-based Mac mini: How to reset the System Management Controller

  • Dropping WiFi Connections after new Mac Min and Upgrade

    First of all does anyone know why this discussion was archived when there was never a solution posted? 
        https://discussions.apple.com/message/12586041?tstart=0#12586041
    Secondly (why I found that thread among many others addressing the same problem). I received a new Mac Mini for XMas (cool, I needed it) which worked fine with my other computer and devices (2 iPads, 2 iPhones, 2 Win7 Laptops and 2 Win7 desktops) for a couple days, so I thought. Now all these devices got along very well until Mr. Mini comes along. Then I note wireless drops occasionally, it seemed to come back so I wasn't too upset, yet and decided to deal with it later and enjoy my vacation.
    Now, after I allowed Leopard to do its upgrade (I had deferred that) I now have all the above devices dropping wifi and physical LAN connections as long as this Mini is powered on. I shut it off, Internet is blazing, I turn it on, Internet falters and screeches to a halt.
    Since all my other devices have worked cooperatively for several years and this device comes along and crashed the party im pretty convinced its not my router or computers. I am not interested in trial and error here. i have many better more important things to do and this is Apples responsability to figure out. I am a very savy IT dude (career professional) and want to get to the bottom of this for everyone. 
    Soooo.... What changed? Why does this device kill my network when it is turned on (note, no alterations from out-of-the box to any network protocol or config.) and why does a thread (one of many) without a solution get trumped on by Apple?
    Apple?

    How to Create & Burn a Bootable Mac OS X Lion Install DVD
    Summary
    OS X Lion includes a new feature called Lion Recovery that includes all of the tools you need to reinstall Lion, repair your disk, and even restore from a Time Machine backup without the need for optical discs.
    To redownload the installer on a computer running OS X Lion, press and hold the Option key while you click the Purchases tab. If the button to the right of the Install Mac OS X Lion item doesn't change to "Install" and allow you to download Lion, use Spotlight to search for "Install Mac OS X Lion" on your computer....
    http://support.apple.com/kb/HT4718

  • I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow.

    I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow. Can anyone help me?

    Congratulations on the new Mini. Are you saying you tried burning and it does not play, or do you want to burn it only for the computer to be able to play it?
    OS X Mountain Lion: Burn a CD or DVD may help.

  • New mac mini won't accept dvd's/cd's in the combo drive

    Hello friends:
    i have a new mac mini that I bought about 2 months ago (Intel, 2.0 ghz). Everything was working fine until I went to put in a DVD today. The combo drive won't accept a disc. It's not that it won't read the disc, it physically won't suck it into the drive. Instead it just sits there. If I try and push it in, nothing happens... it just bounces back out at me as if pushed by a spring. And, no, there isn't already a disc in the drive.
    Can anyone suggest how to get my combo drive to work again?

    Hi jrm27,
    I have an older Mac Mini 1.66 GHz, but I haven't seen this problem.
    I take it that the disc does go in a little way. I would think that that rules out that the drive thinks there's a CD already in the drive. I know that when I have a CD or DVD in the drive, the little doors (they're really there) are closed and won't let me insert a 2nd CD.
    I presume that you have restarted your system since this started to occur?
    When the system is rebooting, hold down the mouse button. This is supposed to force eject a CD. It might also trick your system into thinking there's no CD there, or resetting something.
    Try different types of CDs or DVDs, just to make sure that there's not something screwy with the media that you are using. Try an old-fashioned music CD or something.
    Are there any sounds the drive makes?
    David

  • New Mac Mini won't open DVD Player, I get an error

    This is a brand new mac mini (latest model bought two days ago), just opened and tried to open DVD player without any media on the DVD drive and the DVD Player doesn't open and I get this error:
    There was an initialization error.
    A valid video device could not be found for playback (-70017)
    What could that be?
    Wilfredo.

    No. The DVD Player always open even if there is no media in the drive.
    The problem was the Region. I needed to set the region on the drive, but the error message never told what was the problem, I had to figure it out myself.
    Wilfredo.
    Message was edited by: Wilfredo Nanita

  • New Mac Mini with Lion Video Problem With Dell E228WFP monitor

    Just purchased a new mini Mac 2.3 with Lion pre installed.  I connected to my old Dell E228WFPI monitor via the Mini Display to VGA adapter.  The mini mac worked fine for an hour until I put it to sleep.  It would not rewake.  After rebute the gray screen and apple logo appear with clock, but after clock screen to black and monitor goes to power saver mode.  Took unit to apple store twice and could not resolve problem by changing resolution or other methiods.  Finally, we learned that the system works fine using Belkin HDMI to DVI cable.  This Dell Monitor had DVI connector.  Hope this helps...

    How can a computer that's been turned off (and I mean completely OFF) get a network request? Only a sleeping computer should react to such a request. If you're sure you shut down (Apple Menu, Shut Down), then only an internal power supply or logic board problem should cause this. The only way it could be software is if Lion is not shutting down the computer but is instead putting it to sleep. Is it a new Mac Mini? If so, you should have it replaced or repaired.

  • New mac mini and noisy dvd drive

    Any time I have a DVD in my brand new mac mini, from commercial DVDs to trying to author a blank DVD, I get the dreaded chainsaw sound that plagues anyone who has owned an xbox 360. Has anyone else suffered with this with their new mac mini or should I send it back to apple

    I should have been a little more specific. This happens usually when I try and do slightly disc intensive tasks, such as burn a disc, import a disc to itunes, and I can even get it to sound when I leave a disc in the drive, turn the computer off, and as it's booting it will make the grinding noise. I first thought that the computer couldn't lay on it's side as that's when I first noticed it (sort of like the wii on it's side because this fits my setup), but it makes the same noise whether I have it on it's side or not. This is also not disc specific, I can re-create the noise with different discs, DVDs, CDs when importing to itunes. Guess I'll be taking it to an iTunes store to get it checked out.

  • How do I create a backup  DVD  OS disk for my  new mac mini ?

    how do I create a backup  DVD  OS disk for my  new mac mini ?
      in case of failure HD etc
    no disks came with it

    No disk-version of Lion, but a Lion Thumb Drive http://store.apple.com/us/product/MD256
    For the downloaded OSX Lion form the Mac App Store you can use this http://www.macupdate.com/app/mac/39701/lion-diskmaker to make yourself a disk.
    And have a read here http://www.afp548.com/article.php?story=getting-lion-installers on how-to get/make a machine-specific OSX Lion installer disk.
    Stefan

  • Want to purchase new mac mini but I do not know how I would install programs from dvd without internal optical drive

    I am planning to purchase new mac mini that just came out today but I do not know how I will be able to install programs or save stuff to disk when there is now internal optical drive.  I know I could purchase an external drive but is that necesary. Thanks.

    If you have access to another Mac with an DVD drive you should be able to share it using Apple's drive sharing feature in the OS or at the very least if you have a firewire cable boot into firewire disk mode...

  • I just got a new Mac Mini, and now when I try to import photos into Lightroom, iPhoto try to load them first, then Lightroom can't find the files.  Big problem.  What to do?

    I just got a new Mac Mini, and now when I try to import photos into Lightroom, iPhoto ties to load them first, then Lightroom can't find the files.  Big problem.  What to do?

    Simple:
    File -> Export to get your photos out of the iPhoto Library. In the Export dialogue you can set the kind to Original and you'll get back exactly what you put in.
    Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
    Once exported, you can then trash the iPhoto Library - just drag it from the Pictures Folder to the trash and empty it.
    After that, if you're entirely neurotic about it, just put the iPhoto app in the trash and empty it.
    Regards
    TD

  • Airport Express problems with new MAC MINI and DLINK router SOLVED

    Hi just thought I would post this as it may well help others experiencing similar frustrations with new core duo mac mini and wireless connection or quality problems across the network / internet etc
    I have a 3 week old, new mac mini core duo 1.8ghz 2gig ram, 120gb disk - First Mac, connecting to my exisiting wireless network via DLINK ADSL Router 2MB Broadband also one windows laptop and pc also wireless on the network and two airport express potins to stream itunes to
    Problem was briefly
    Mac worked fine, but the network connection just far too slow, laptop and pc, 1800+ kbps downstream mac mini 90 - 150kbps (http://www.adslguide.org/tools/speedtest.asp)
    also if i ping the router directly from terminal (ping -c 20 192.168.1.1) average response 12+ ms with 20% packet loss, yet laptop and pc avg 2ms no losses
    Spent 2 evenings on frustrating calls of more than 1 hour each (due to being cut off , then ring back and closed etc etc) and carrying out a the helpdesk troubleshooting (I am an IT consultant I think I am above this level), eventually an archive and install of the os as well
    last night I call for the third time, insisting I dont wish to carry out any further troubleshooting, and want it replaced and resolved or my money back
    I receive a call back from product specialist (not sure if thats mac mini specialist or airport) but we resolved the issue (his knowledge far superior to the help desk do this do this attitude)
    between us we carried out the folowing and resolved the problem and I am now very happy
    mac now downstreaming also in excess of 1800kbps (as expected for 2mb broadband)and no packet loss
    This problem was resolved by switching off the turbo option hidden away in the routers settings, under wireless configuration
    Supposed to improve performance, but its rubbish and will make hardly any difference under mac os to the speed but will certainly affect your mac mini performance(you may have a similar setting switched on in your routers and mac os dont like it)
    We stumbled across this by first disconnecting one of the airport express devices from my dlink network, and using it on its own default apple wireless settings, effectively making it a standalone wireless network, and not via the dlink router
    we then carried out the same ping with the ip address of this device (from airport admin utility default 10.0.1.1) and the results were fantastic 2ms avg no package loss
    this established it was something with the router, and how we then interrogated the routers settings and found the turbo on option within wireless configuration
    you may not be able to replicate this if you dont have an additional network you could join (such as airport express), but probably worth checking your own router settings for something similar
    Hope that may be of assistance to others, sorry that its a bit long winded and garbled, but I'm just so excited to finally get my new mac working as i would expect it to
    Also perhaps insist on speaking to a product specialist immediately that the helpdesk are unable to help you

    Hello macfar14. Welcome to the Apple Discussions!
    For just streaming iTunes and/or for sharing a USB printer, the AirPort Express Base Station (AX) just needs to be configured as a wireless client ... which you already attempted to do.
    Just to be sure nothing was missed, here are the basic steps to do this:
    Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
    AirPort > Wireless
    o Wireless Mode: Join a wireless network
    o Network Name: <existing wireless network's Network Name or SSID>
    o Wireless Security: <select the encryption type of the existing wireless network>
    o Wireless Password: <enter the existing wireless network password>
    o Verify Password: <re-enter the existing wireless network password>
    Music
    o Enable AirTunes (checked)
    o iTunes Speaker Name: <enter desired speaker name>
    o iTunes Speaker Password: (optional)
    o Verify Password: (optional)
    o Click Update to write the new settings to the AX
    In iTunes:
    iTunes > Preferences... > Advanced > General
    o Look for remote speakers connected with AirTunes (checked)

Maybe you are looking for

  • Difference b/w create and createInsert button

    hi, what is the difference b/w create and createInsert button in ADF data control.

  • CRL does not appear to be working

    Hello All Can someone please help me with the following question :) I setup a LAB where by I have a Windows 2003 R2 AD and Windows 2003 R2 Enterprise Root CA (will upgrade the lab the 2012 R2 later), and a Windows 2012 R2 IIS Server with a Test WEB S

  • Posting Vendor Classification Data using XK02 transaction

    Hi All, I am getting the vendor master legacy data by using an IDoc where in i am uploading the vendor information through transaction XK02. Now i have to enhance that to post the vendor classification information also. There is a function module IDO

  • My text isn't smoothing correctly

    Hi, I'm having a very odd problem. I'm building textbox dynamically as i normally do, i'm importing a font to the library and embedding the font to the textfield. However for some reason when the text is White it doesn't antialias correctly. I'm usin

  • $$$%%%   Linking flash file PLZ HELP  $$$%%%

    hello and thankyou for whoever is reading this for taking the time! Im makinga band web site and I made flash buttons in flash 8(not the flash buttons in dreaweaver). now I need to add a link to each button. How can I do this. I see that a lot of ban