Problems playing sound after installing 10.4.4
After installing 10.4.4 update, i have a problem when i play some mp3 file in itunes or quicktime 7.0.4, it sounds with jumps and cracking. I've reinstalled the update using the combo, repair permisions, reinstalled quicktime and nothing happens.
Any suggestion?
Thanx
After upgrading to OS 10.4.4 I have no startup chime or sound. I to tried changing the Audio MIDI Setup application (located in Applications/Utilities) and changing the output setting to different settings and back to 44 KHz (44100.0 Hz). It made no difference.iMac G5, 2.0, 20", 1.5g Mac OS X (10.4.4)
iMac G5, 2.0, 20", 1.5g Mac OS X (10.4.4)
Similar Messages
-
Problems playing mp3s after installing iTunes 7.1
I installed iTunes 7.1 today. After that, I have problems playing mp3 songs on my iPod (80 GB). The AAC-files play well. The mp3 songs can also be played on iPod via iTunes when its connected to my computer, but when I disconnect from the computer, the mp3 songs starts, and play for about 2 second, and then jumps to the end of the song and stop.
Very thankful for any help.that's typically caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
the following document may be of some assistance:
iTunes 7 for Windows: iTunes had detected an audio configuration problem -
Problems with sound after installing KT3 mobo
Ive just had the above motherboard installed with G4mx440 graphics accelerator. Before I installed the sound drivers the games were working fine, just with no sound. Then I installed the sound driver and the sounds on the desktop are fine but when I load a game the in game sound is stuttery although the game itself is runs smoothly!
There are more positive results with PCI Latency Timer set higher -- 96, 128. Yes, you can always revert to the original settings.
Latest update, try MSI site and also http://www.realtek.com.tw -
Have no sound after installing flash player 11.3.300.262. Working fine with flash player 11.2.202.232
hello, unfortunately this seems to be a bug in adobes flash plugin 11.3. please refer to the following forum entry on how to handle the issue or report the problem with your system details to adobe.
http://forums.adobe.com/message/4483563
https://bugbase.adobe.com/index.cfm?event=bug&id=3210964 -
Portege 3110ct has no sound after installing XP Pro
I'm a novice when it comes to laptops, so here is the problem: My 3110ct has no sound after installing XP Pro. Didn't have sound when I bought it with another operating system on, report says no sound device installed.
Does this mean I need to get a chip for the laptop or is it a driver I need & where can I find the part or the driver for this.
Please help.Usually if the sound driver was not installed you will get no sound but also a yellow exclamation mark should appear in the device manager.
If the sound card chip is damage I presume you will be not able to see the yellow exclamation belonging to the sound card in the device manager.
You bought this Portg as a second hand unit. Am I right?
So possibly the sound card is faulty.
The computer uses a ESS ES1978 (Maestro-2E) and ES1918 sound chip.
Check if you can find an XP sound driver in the internet. -
Basically it is just like it says. Certain songs stop playing sound after a certain point in the song but the song continues playing and ticking down like it normally would. Does anyone else have this problem?
Hi I found the answer from another post. So far everything is working find. I been trying to fix this since march,
from
Mike N. (nahyun...
Posts: 2,814
From: New York, NY
Registered: Oct 1, 2003
Re: itune application and itune folder
Posted: Jun 27, 2007 7:16 AM in response to: Austin Smith2
Solved
Reply Email
Deleting the application rarely solves anything on Macs. A better starting point is normally to delete the preference file for the application (in Users/~/Library/Preferences/com.apple.itunes.plist) or see if you have the same problem in another user account on the computer.
PM MDD(1.25GHz 1.25G-RAM 320G-HD) Mac OS X (10.4.10) 20"ACD USB2Connect MacBook (2.0 White)-2GB Report this post
Austin Smith2
Posts: 118
Registered: Oct 31, 2001
Re: itune application and itune folder
Posted: Jun 27, 2007 12:51 PM in response to: Mike N. (nahyun...
Reply Email
Mike, deleting the preferences did the trick, but I don't know why. Itunes downloaded 5 days of podcast! Hurray!! Thank you!!!!!!!!! -
No sound after installing windows 8 on my hp 620 help
no sound after installing windows 8 on my hp 620 help
This question was solved.
View Solution.I cannot find your audio driver on HP's support page, but I was able to locate this one, which is the same driver as yours, just the most recent version. According to what is listed, it supports Windows 8. Give it a shot and let me know if it works for you.
http://goo.gl/0IMBd
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Problem with sound after update
Hello
After update to 11.3 I have no bass sound in subwoofer in Firefox browser (youtube). I uninstall the newest version and install previous (11.2) and bass plays ok.
My os: Windows 7 x64. Sound card Creative X-fi.Hello!
My problem is summed up in this topic.
Updated Flash Player with 11.3 this morning (june 12th 2012) and since then my 7.1 Sound System works only 2.1. If i enable EAX Effects, works on 7.1 but since it`s just a room it sounds very odd.
I have no problem with sound on HTML 5 websites for that matter, Winamp, Video Players, games.
Uninstalled Flash Player, sounds work ok without it on different browsers, other than Chrome (since it has FP built in).
I hope for a sollution soon.
Thank you.
*edit*
Untill there is a permanent solution, i found a way to deal with my issue and i hope it will help others.
I personally use Chrome and this is for this browser:
1. Type "about:plugins" w/o the quotation in the navigation bar.
2. On the upper right u will see "Details" click it then find the word "flash", and you will see something like this:
Flash (3 files) - Version: 11,3,300,257
Shockwave Flash 11.3 r300
Name: Shockwave Flash
Description: Shockwave Flash 11.3 r300
Version: 11,3,300,257
3. I say again, this worked for me on Chrome. The 3 files i have, two of them are Version 11,3,300,257 and one is 11.2.31.144
4. Simply disable the lates version 11.3 and enable the previous version 11.2
I hope this helps.
Message was edited by: AndrewPAM -
Loss of sound after installing ios7
Hi. I had an issue with sound on my iPhone 4S before ios7. When low on battery it would stop playing sounds and keyboard clicks. I know its not a hardware problem, as with full battery, it was absolutely fine. I installed ios7 hoping that the issue would be sorted out, but its now worse - no sound at all. Again, I know its not faulty speakers, because if I go into Settings > General > Sounds, I can slide the volume slider for ringtone back and forth and it will play my ringtone!
How do I get this sorted?I have this issue on iPad after IOS7. Spread the word, it's an issue. Have spent hours on the phone to Support and no result after back up and restore. IOS7 is the problem for sure. My iPad still gives sample sounds if I change Settings, they have conceded it does not therefore look like a hardware issue. Get momentum on this, or they will keep telling us to do resets or change the mute/screen lock options. More people need to get on this one or it will disappear.
-
NO SOUND AFTER INSTALLING WINDOWS 8.1
Hi, I'm hoping someone will be able to help. My sister has a compaq 58 laptop and after installing windows 8.1, now has no sound. The sound was there when 8.1 was installed but after logging off and logging back on again, the sound disappeared. We reinstalled windows 8.1 and same thing happened. We have run scans and got sound again but once again logging off and logging back on again, the sound disappeared, very frustrating.
The product code is DOX18ea#abu and serial number [edited Serial Number by Moderator]
help would be much appreciated.Devina, This seems to be a common problem with Windows 8.1. It does not save a working state when logging off. I was afraid to touch my pc when the AUDIO was in a working state. However Microsoft logged me off with no fear and did not save the working state. What a great "glutware" corp. Having said that when the AUDIO is working it appears to work great! Sure wish HP/MICROSOFT could get their act together. Can you say "BASE BAND" , "DSP", "FIR" ETC. Well they think they know the fancy stuff. Now if they could just get it to function for normal people. Can you say "KISS".
ham123 ps: just send it back!! for total care!!! -
[SOLVED] No Sound After Installing KDE
After installing KDE I have no sound.
Results of commands
lspci | grep Audio
gives
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
and
aplay -l
gives
aplay: device_list:256: no soundcards found...
Can someone help?
Last edited by vujke (2012-11-13 12:14:52)Morn wrote:First I would run "lsmod" to check if the snd kernel modules are loaded…
Module Size Used by
rfcomm 33791 4
bnep 8857 2
snd_hda_codec_realtek 61193 1
btusb 12372 0
bluetooth 192120 22 bnep,btusb,rfcomm
snd_hda_intel 26180 0
snd_hda_codec 98033 2 snd_hda_codec_realtek,snd_hda_intel
rfkill 15604 2 bluetooth
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 75167 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
coretemp 6070 0
kvm_intel 124749 0
kvm 373917 1 kvm_intel
snd_timer 18934 1 snd_pcm
snd 59989 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5442 1 snd
ppdev 5902 0
psmouse 71909 0
microcode 12377 0
parport_pc 30541 0
acpi_cpufreq 5933 1
mperf 1267 1 acpi_cpufreq
processor 26855 1 acpi_cpufreq
serio_raw 4689 0
pcspkr 1899 0
iTCO_wdt 5255 0
iTCO_vendor_support 1929 1 iTCO_wdt
lpc_ich 10609 0
parport 31363 2 ppdev,parport_pc
atl1c 33646 0
asus_atk0110 9824 0
evdev 10266 4
fuse 69173 8
vboxdrv 1823469 0
ext4 440434 2
crc16 1359 2 ext4,bluetooth
jbd2 78751 1 ext4
mbcache 5977 1 ext4
sr_mod 14823 0
cdrom 35520 1 sr_mod
sd_mod 29559 7
ata_generic 3338 0
pata_acpi 3451 0
uhci_hcd 23436 0
ata_piix 23352 5
libata 167683 3 pata_acpi,ata_generic,ata_piix
scsi_mod 133386 3 libata,sd_mod,sr_mod
ehci_hcd 41816 0
usbcore 150398 3 btusb,uhci_hcd,ehci_hcd
usb_common 954 1 usbcore
i915 495073 2
video 11276 1 i915
button 4662 1 i915
i2c_algo_bit 5391 1 i915
intel_agp 10744 1 i915
intel_gtt 15659 3 i915,intel_agp
drm_kms_helper 32877 1 i915
drm 218724 3 i915,drm_kms_helper
i2c_core 20707 4 drm,i915,drm_kms_helper,i2c_algo_bit
I would say it is.
Morn wrote:
By the way, I'm also having audio issues with KDE 4.9.3 now. I can play sound though, it's the mixer that's broken.
P.S. I could fix my issue in the KMix preferences. (The wrong audio interface had been selected since the upgrade.)
Do you think on Phonon preferences. If is, I got nothing to select.
Last edited by vujke (2012-11-11 22:50:35) -
Problem with chess after installing Leopard
The other week I did an Archive and Install of Leopard on my MacBookPro running Tiger. Several applications failed to work following the install and this has been solved by downloading new versions. Although chess seems to be more problematic. Every time I launch chess I just get a message saying that chess has unexpectedly quit. However this behaviour is starting to become expectable. I have read other posts reporting similar problems after installing Leopard however they are able to play a couple of moves before it quits. For me chess does not even launch.
I have tried trashing the preference file, creating and using a new user account, and copying chess from another computer. The copied application just states that I can not use chess with this version of OSX.
Does anyone have any ideas as I really do not want to have to reinstall Leopard just for a application I only use when very bored (which is surprisingly often).
Thanks for any help you can give.
ChuckThanks for pointing out that app. Very useful indeed.
I have deleted my copy of chess and reinstalled a new copy from the OSX Leopard install disk and it still fails to launch.
Any other ideas? -
No sound after installing ios6.01
Hi and thank you for your time. After installing the ios6.01 update i lost my sound on apps and videos. I rang customer support and as i was talking to them it magically reappeared. And now i have lost it again. I have tried every trick i could find,restart phone, reset phone, restore factory settings, clean out the gunk in portals, do you have any suggestions on what it could be or how to fix?
i have never used headphones, it is not on silent mode. I need help ASAP (the main use of my iphone is for my sons videos who is autistic and it is no fun when they aren't working) PLEASE HELP ME!hello, unfortunately this seems to be a bug in adobes flash plugin 11.3. please refer to the following forum entry on how to handle the issue or report the problem with your system details to adobe.
http://forums.adobe.com/message/4483563
https://bugbase.adobe.com/index.cfm?event=bug&id=3210964 -
No Sound after installing Xfce
Hello, I'm having a strange problem. After installing xfce I've got no sound in my system. I have an Asus Xonar DX and usually the only thing I needed to do after installing a new system was to select it in the audio controller but this time it doesn't work. I tried uninstalling xfce4-mixer and install paprefs pavucontrol and set the card there but it doesn' t work and I don't know what else to try.
http://i60.tinypic.com/6i6wcl.png
Any help would be really appreciated. Thanks.
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --Herbalist wrote:Muting S/PDIF in alsamixer seemed to fix this problem as suggested in this thread https://bbs.archlinux.org/viewtopic.php?id=156502
How do I do that ?
http://es.tinypic.com/r/250nywj/8 -
No sound after installing 2.1 firmware
After installing the new 2.1 firmware on my 1G iPod touch I can´t listen sound from YouTube, music and FlyCast internet radio, but I can listen sound from games, somebody have this problem? Is the new firmware causing this problem?
did you ever get any support for this? how did you fix your 'no sound' problem?
i still have NO SOUND on my iTouch after installing 2.2 - the problem started with 2.1 when the volume control went haywire. now i have no sound and nobody has a solution.
Maybe you are looking for
-
ITunes library contents at several HDs, how to move location?
I have a problem with having iTunes recognise that some of my iTunes library contents are being moved into another HD. I have only some most used music files at the internal HD of my PowerBook G4, and a huge video collection at an external HD, and no
-
Anyone with problems with Dreamweaver?
hi Dreamweaver hangs on startup of the application. Does anyone else have this problem? I've heard there are problems with DW and OS 10.5.7. I've searched online, disabled the startup menu as suggested, but still hangind when I try and open an html d
-
Email attachment rows greater than 255 char get truncated
Hi I am trying to code in 4.6C to email excel attachment with rows greater than 255, and the rows are being truncated using function module SO_NEW_DOCUMENT_ATT_SEND_API1. I have searched the forum and can not find an actual solution to this on a 4.6c
-
I have a BT wireless home hub which the iphone connects to. My problem is that even if I have turned the WiFi off emails are still sent to my phone during the night which keeps waking me up! I need to have the phone on in case I get called but not fo
-
cannot activate my viber after i update to 6.1.3 iphone 3gs..can u please help me...the the code is ok but if i activate...its being error.