Problems post apple tv 2 with movie playback

So my apple tv is now gone. Long story short, i cannot get my videos to play on my mac without first pausing them after I tell them to play. It's killing me.... Anybody at all please help.
Thank you thank you thank you

if you don't have an appletv then you don't have an appletv issue ?
maybe you should post your question in the most appropriate forum, which would be the itunes forum ?

Similar Messages

Frequent problems in Apple PPC Mac with OSX Leopard 10.5.8

Hi,
Frequent problems in Apple PPC computers with OSX Leopard10.5.8
I have a Imac 17icnh G5 2Ghz 512 ram (Standard not the isight) it had a clean install of OSX 10.5
But after running a update to 10.5.8 with update if Itunesand security etc it was about 6 updates all together.
Now the Imac uses to much CPU for small tasks and uses84-90MB of ram for a Kernal Task.
When I try check permissions in disk utility the CPU goes toabout 80% in something called InstallerB and wont finnsh because there is no CPU power left
and will over heat if I left it for too long.
The Exact symptoms of the 10.5.8 with update my differ alittle but I have had this same problem on about 5 PPC apple computers and in the end I sometimes
Just down grade to the flawless Tiger 10.4.11.
So my question is > how do I fix this problem ? Which of the Updates dose this to PPC mac’s ? (is it itunes or securtiy)
Is Leopard 10.5.8 just a peace of JUnk just like windows Vista was and I should alwasy use Tiger for PPC and Snow leopard for Intel.
Sam

Hi Sam,
Leo uses 2 to 4 times the resources of Tiger, & while 512MB is the minimum for Leo, that really crimps the OS, it isn't all that great for Tiger, though 10.4 does better with only 512MB, I'd put 2GB in it for decent performance, (if an IntelMac I'd say 4GB for the same OS).
http://eshop.macsales.com/item/Other%20World%20Computing/3200DDR2GBP/
Also, open Console in Utilities, look for repeating messages, you may have some 10.04 things running that fail in 10.5.
I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
Is Leopard 10.5.8 just a peace of JUnk just like windows Vista was and I should alwasy use Tiger for PPC and Snow leopard for Intel.
In my opinion, OSX is headed towards Windows®, & aimed at users that only know how to Twit.
If Tiger does everything you need, like you don't need iDevices & know how to protect yourself on the Internet without the added Security of 10.5 & associated Apps, then by all means stick with 10.4.11.
If you want/need 10.5... max out the RAM for sure.

Problems syncing Apple Lossless Files with iphone 3.0 and 3.1.

I recently started having problems with syncing apple lossless files with my iPhone 3G. They were recording I made using Logic Pro and the same as have been working with no problem since I got my iPhone last year. Although the songs would play and indicate the correct total time in iTune, on the iPhone they would indicate a total time of over 2 hours even though they were 2-3 minute long. The same files converted to mp3 did not have this problem. Since updating to iTunes 9 and 3.1 on the iPhone, the problem is worse. The Apple Lossless format files do not show up on the iPhone at all even though they are fine in iTunes. mp3 format do not have this problem.
Anyone else having the same issues?

Hi Allen,
I would like to thank you very much for your help with Forte 3.0 and WTK 1.0.1 beta.
Thank you for the pointing me to the ForteJ2MEGuide.pdf file. It is very useful document.
However, even following it I did not succeeded in accomplishing my task.
I was able to follow the instructions and create, compile and run the Hello midlet which
was generated by the IDE. My previous problem related to the fact that I did not create
project and midlet suite for the midlet. After doing all of that the generated midlet worked. However, it was not what I wanted.
First, the instructions in the guide only described how to generate new midlet. I tried
to add the existing midlet to the current project. Unfortunately, the IDE always picked
up the generated template, not my code.
Second, when the generated midlet started to work, it was difficult to debug it. I set
up the breakpoint, but the IDE did not stop at it. I think the reason is the compiler
did not have debugging flag set up. Do you know where it is possible to set it up?
So, at the end I still cannot accomplish very simple task which should not be very
difficult at all:
1. Use my own code to create a midlet.
2. Compile and execute the midlet and see how it runs in emulator.
3. See step-by-step execution of every line of my code and the value
of every variable in the code.
Regards,
Jacob Nikom

Problems with movie playback after iTunes update

Recently updated iTunes to 11.1.1.11 and now my Disney movies won't play - the audio keeps dropping out. Any help?

Do you have a KVM switch to share your monitor between your Mac and your PC? I was getting this problem when I got one of these so my new Mac could share my monitor etc with my old one but found a way round it. In System Preferences -> Displays, tick the 'Show displays in menu bar' box. Then click on 'Detect displays' from the drop down menu. The screen will go blue for a moment and the computer will recognise the monitor for what it is.
Mac Mini 1.4GHz G4, PowerMac 450MHz G4, both Mac OS X (10.4.6) Airport Express

Why do I have so much problems downloading your itune extras with movies?

Extras waste of time and they won't download ... I have seen other post closed with no answers .. why???

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

Apple TV freezing on movie playback

My apple TV keeps freezing on movies that have already been previously purchased. So far 3 different movies will play for about 15 to 20 min then freeze. I have to go out to menu then resume play. The movie shows that it has fully downloaded on the bar.

The Apple TV 2 is not supposed to show up under devices in iTunes.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Problems synching two iPod Touch with movies

I have two iPod Touches, one 16GB 2g and one 32GB 3g. I use the same computer and iTunes with both iPods.
I have imported/converted several movies to the iTunes library using HandBrake, and it works excellent.
The problem is that I'm only able to copy/synch all of the movies to the 3g version, and only two of the movies to the 2g version. I've tried several things, both using iTunes automatisk synch and manually moving/copying the movies to the 2g version. But no matter what I do, only 2 of about 60 short-movies are copied and I don't understand why?!?
Can somebody please help me

If you use the same itunes account then you can transfer itunes purchases:
File>Transfer Purcahses

Multiple Apple TV's with Movie Rentals

I have searched everywhere for this online, and can not find a answer for this. I have two apple tv's throughout the house. If I rent a movie in the living room, can I continue watching in the bedroom, or is it only available on that one APTV? If someone know this please let me know!!!!!

you would need to sync the rental to your itunes library, and then sync it over to the other AppleTV. that aint gonna be an automatic process though.

Post to Returns stock with movement type 632

Hi all,
I have configured SD Customer Consignment for my client. When consignment goods come back from the customer Movement Type 632 is used en the goods are posted in unrestricted use. My client want these goods to be posted in the Returns stock. Does anyone know if this is possible?
Movement type 651 posts to the Returns stock. Where is teh actual setting made that this movement type posts to Return stock. Can anyone explain to me how this works.
Thanks in advance.
regards,
Roel

Have tested your scenario- Just now.
Though you can change the mov type in sch.line cat, but it acts like as normal return scenario, so you will be loosing the track of Inventory available @ Customer as part of Consignment.
Still, if you change the mov type, you will not be able to perform PGR for Consignment Returns in VL01N,its becasue that, special stock indicator-W in item cat:VOV7.
FYI,
Sales doc type - Item cat -- SCh.line Cat- Mov type
Consig Fillup - KB -
KBN -
E1/E0 - 631
Consig.Issue -KE--KEN--
C1/C0- 633
Consig.Ret.-KRKRND0----634
Consig.Pickup-KA--KAN--
F1/F0- 632

Movie playback issues

My movies are having playback issues again. Default settings are 44.1kHz 16bps 720p HD.
Operating System: Windows 8
Itunes Version 12.1.0
The issue is the sound goes in the beginning of each film. I have a computer which is two years old and yet there seems to be a recurring problem with movie playback.

I think it depends on which version of iTunes you are using. I had the same problem with digital copy movies when I loaded the 64bit version of iTunes 8.1, iTunes64setup.exe, on a Vista machine. Once I deleted that version and loaded the 32bit version of iTunes 8.1, iTunessetup.exe, I was able to view the movie in iTunes AND download it to my iTouch.

Do any of you experience Im having with my ipad? I can't make a comment in Facebook for older posts and I can't open numerous comments from old posts of my friends. but everything works perfectly when I use laptop. is there problem between apple and FB?

do any of you experience Im having with my ipad? I can't make a comment in Facebook for older posts and I can't open numerous comments from old posts of my friends. but everything works perfectly when I use my laptop(non-apple). is there problem between apple and FB?

Facebook apparently has their site coded poorly for tablets with touch screens. Try using the Facebook app. It is not perfect either but it is better than view in a browser lately.

Problems with audio playback in QuickTime movs on site

I'm working with some clients, and posting QuickTime movs for review on my site. Everything was fine until this last pass, when suddenly, half the people said they could see the video, but not hear the audio. I'm posting H.264 video with AAC audio. Even more unusual is that the people with the more recent machines and software were the ones having trouble. The older cpus and software seem to playback the movs just fine.
And it seems to be affecting Windows and Mac users equally.
Any suggestions?

I'm working with some clients, and posting QuickTime movs for review on my site. Everything was fine until this last pass, when suddenly, half the people said they could see the video, but not hear the audio. I'm posting H.264 video with AAC audio. Even more unusual is that the people with the more recent machines and software were the ones having trouble. The older cpus and software seem to playback the movs just fine.
And it seems to be affecting Windows and Mac users equally.
Any suggestions?

Many problems and Apple Support isn't coming up with answers

Bought an apple tv yesterday. Am not happy.
I was on the phone with a tech for 2 hours yesterday. He had to guide me through upgrading it's software. But he couldn't resolve the problem I have with renting a movie on apple tv. Had me send an email to support!!!!!
Pictures and music sync and work fine. What doesn't is this:
1. Attempting to play a purchased tv show (sync'd from iTunes) on apple tv, after I select the tv show on the apple tv interface, apple tv gives me the following message "apple tv is not authorized to play this content."
2. Apple TV does not allow me to rent movies, it gives me an error message that it does not recognize my apple id or password. I assure your, after many tries with the tech rep on the phone, I know I didn't type it in wrong.
3. Apple TV is not able to access iTunes to authorize sync'ing a movie I rented on iTunes. I don't think this is even sych'ing. Please don't tell me that iTunes rented movies are not enabled to be sync'd (not a feature?).
4. Apple TV searches on YouTube gives the error message "content not found cannot communicate with YouTube please try again later."
Apple TV does play trailers for the movies available to rent. I expect this means it is able to download this off the internet.
So anyone want to try to beat apple's supports next 24 hour window for suggestions. It will be very much appreciated.
Other details:
cable internet (tv, tele, internet all in one package)
Airport express (cable modem goes direct to the Airport express)
iMac sunflower OSX 10.3.9 (yes I know its old (5 years), but it still works fine - directly connected to airport via cat5a ethernet connection, no airport )
MacBook OSX 10.4.11 connects via airport.
Canon MX300 connected to airport express via USB.
I'm in NY with a USA apple id.
Computer was purchased and used in the UK before I moved back to the USA
Thanks,
Dan
Message was edited by: longtalltexan

I had such a strange experience.
I bought 2 160GB ATV's to replace my original 40GB. One worked, right out of the box using wireless.
The other, using wired Ethernet couldn't connect to Apple store to rent movies as described in many posts.
I tried putting it on wireless. I tried removing WEP. I downloaded the newest update. I reset the machine by taking out the power for 1/2 hour and then coming back.
I gave up after 2 hours.
I took it to the apple store today and replaced it and the new one worked right out of the box in wireless mode. Go figure.
Apple support was useless.
--Jeffrey

Question: Apple TV Movie playback freezes very briefly but frequently

Last night I rented a couple of HD movies from iTunes on my 160GB Apple TV and watched them. During playback there were quite a few very brief instants of the picture freezing during movie playback. It's the kind of thing some people may not notice (I don't think my wife noticed), but it got to be kind of annoying to me, to the point where I was anticipating it to happen again instead of enjoying the movie!
One of the movies was about 80% downloaded when I started to watch it, although it said it was "Ready to Play." Also, the hard drive on my Apple TV is about 3/4 full with music.
Anyone have any idea why this would be happening and is there anything I can do to fix the problem?

ffchop wrote:
Thank you for your response. Again, it was relatively minuscule, but just noticeable enough. I will reboot it.
Has this been a noted problem with other users of the old unit?
I've seen very bried video stutters and audio dropouts from time to time.
Another possibility is the encoding but generally it's not that - if you rewind and replay usually it plays ok 2nd time around - if encoding of video was to blame it would always be the same.
I am considering grabbing a new unit in the future. Has Apple noted that the new Apple TV will have "smoother playback" relative to the old unit, or something like that?
Not specifically, it's just a more powerful chip in it than previously - the old AppleTV was probably pushing the limits with the available hardware.
However, from:
http://www.apple.com/uk/appletv/
this might be a hint:
"All streaming. No hassle.
Everything you want to watch — films, TV programmes, photos and more — streams wirelessly to Apple TV. That way you don’t have to worry about managing storage or syncing to your iTunes library. HD film rentals play over the Internet to your widescreen TV, while music, photos and TV programmes stream from your computer. Either way, all you have to do is click and play. Since Apple TV features a powerful A4 processor, it streams everything effortlessly, without frozen screens or stutters. Video looks crisp and clear. And just like watching a DVD, you can fast-forward through opening credits, pause for a popcorn break or replay a hilarious scene until you memorise every line."

Problem on mb1b with Movement type 309

when I use the t-code mb1b to transfer posting with Movement type 309,the system give a hint 'Account 40000000 requires an assignment to a CO object'. I checked the configuration of omwb and obyc.It seems no problem.
So can anyone tell me how to solve the problem? Thanks!

Hi
Alternative to the above solution will tell u which should work,it seems from the error that you need to put the Cost Center or G/L account. But if you don't want
the system to ask you everytime you do the goods transfer, you have to setup
your Cost Element / CO object. Go to transaction KA02 and put the
appropriate CO or Cost Element (when the system gave you the warning,
normally it gives you the CO object that need account assignment) and
assign the Default Acc.Assigment to the CO/Cost Element.
But before you do that, I suggest you to contact your FICO people.
Good luck
Regards,
Susi

Problems post apple tv 2 with movie playback

Similar Messages

Maybe you are looking for