Problems posting BCC from address book

I can not place addresses from my address book to the BCC area, they revert up to the To slot no matter what I do. This happens with either full groups or selected individuals from the addrss book.
G4 733   Mac OS X (10.4.9)  

Yes this is an issue that many here have expressed angst about.
I select the contacts from the Address panel that I want placed in the Bcc: field and then click/drag all selected/highlighted contacts to the Bcc: field.
Hopefully this will be addressed with Leopard but seems like something that could be added/changed with a minor update to Tiger Mail and Address Book.
You can provide Apple feedback about this here.
http://www.apple.com/macosx/feedback/

Similar Messages

  • Problems printing envelopes from Address Book since Lion upgrade

    I've been printing envelopes to my HP PhotoSmart 2575 All-In-One printer from Address Book without any problems for years. I upgraded to Lion and now the first envelope is blank. Second one is okay but after that their print position slips little by little up the page until they become usless. I see on the forum that there are other people with different printers but the same problem. Has anyone found a solution to this?

    Hi David and Everyone Who it Might Help
    I was having this problem too!  *Many* thanks to you! 
    I was having it with both a new brother and Epson printer. 
    I followed your advice and created a custom envelope and just to clarify for any future reader.  The "rotate 90 degrees" is changed under the "orientation" tab by simply selecting the layout with the picture sideways inside of straight up and down.
    Second, the size change you mentioned is for the "Height," naturally, not the Width.
    Many thanks!!!  Great find.

  • Problem with Groups from Address Book in Apple Mail

    I have set up a group in my address book. When I use Apple Mail I use this group to send specific messages to. But for some reason I keep getting error messages saying that my outgoing sever encountered a problem with the messgae. It only happens when I send messages with a group, not if I send messages to single recipients. The group consists of 90 emails, so I can't enter their emails each time I want to send a message to the group.
    Thanks in advance,
    Regards

    I am having a similar problem. All the addresses are correct, and I know this because I use them all the time with no errors. BUT when bundled into a group - actually any group I set up I cannot send successfully. I have two groups in my mail program and neither will work.

  • Problem printing labels and envelopes from Address Book

    I am very frustrated by the impossibility, when printing labels or envelopes from Address Book, of including both an individual name and a company name on the label or envelope. The Address book will only print one or the other. When sending correspondence to a person in a large company or building, the correspondence will not get to that person with only the company name or the individual name. It shocks me that in all these years I have been a Mac user, Apple has never noticed and fixed this fundamental problem. I would now like to buy an Ipod or an Ipad, but I am reluctant because I do not want to have to sync my addresses to Apple's juvenile address book. Is there any solution to this?

    !http://i46.tinypic.com/2nvn6f.gif!
    "It shocks me that in all these years I have been a Mac user, Apple has never noticed and fixed this fundamental problem.
    Is there any solution to this?"
    Upgrade to Snow Leopard!
    Or check out the Mail & Address Book - Tiger Forums & ask if there is a work-a-round.
    !http://i50.tinypic.com/izvwo1.gif!

  • Printing problem from Address Book

    This is driving me crazy. I am printing envelopes for Christmas cards from Address Book and I was trying the different options for printing my home address on the envelope (selecting a different font from the default and selecting a photo as an image to be included). I've now concluded I don't want to include any image when printing my home address but now can't figure out how to get rid of it. In the print menu it has a "set" button for the image, but it just takes you to a finder window to select a new image, but I can't see how to select no image at all. Can anyone help?

    Hi, I had the same problem. I solved it by selecting a spacer.gif image. This is an image of 1 white pixel. This was the only way I could think of and works fine.

  • Cannot print from Address Book! Print freezes and will not proceed.

    I want to print an address list for Christmas cards. When I select the Group, select all and select Print I get the option box. I then select my printer and use the down arrow to open the dialog box that shows I am printing from Address Book and gives the different forms I can use (ie list, label, envelope) as well as the fields to include in the list. Once I have everything selected I click the Print radio button. All of the information under the Address Book options line disappears. Print remains highlighted and my printer Que never opens or appears. If I manually open the printer there is no print job showing. At this point the Address Book application is frozen. I cannot select cancel on the print dialog box (I can click it, but it does not highlight and it does not close the dialog box! In order to get out of this situation I have had to close Address Book. The quit option on the menu does work and Force Quit is unnecessary.
    I actually spoke with AppleCare on this issue on Friday 05 Dec 2008. The tech I spoke with knew of no other such situations, but when I started checking on this discussion page I see a posting from REECO from clear back on 24 Sept 2008. His posting can be found at http://discussions.apple.com/message.jspa?messageID=8161605&tstart=0
    The technician had me do several things. One was to pull my Caches folder out of my system Library folder. He also had me remove some Address Book preference items. The end result of these actions was a Mac Pro that would not boot! (The failure followed an Address Book crash with a "KERPROTECTIONFAILURE" and the message that some QualityMedia plugin might have created the problem!)(I could find no such plug in either on my system or via Google search!) The tech had asked me to boot to safe mode by booting while holding down the shift key untill the spinning gear appeared. The machine never progressed to a successful boot! I ended up having to use a 2nd hard drive and physically place it in internal slot 1 on my Mac Pro proceeding to reinstall Tiger! The bad news is that this did NOT solve my printing problem.
    If I am attempting to print from a new install with just the Apple address card and the Owner's card in Address book the print proceeds fine. Once I import my data I am back to the same print failure.
    Some diagnostic steps I have tried. I have tried USB local printers and bonjour printers. I have used Epson and Canon printers. I have tried to print to a PDF. I have tried printing from another computer (12 inch PowerBook) with identical results!
    At this point I am going to call AppleCare Monday morning and see if anyone there has any more suggestions. Any suggestions this forum has will be received gratefully!

    I was having the same crash or "just not print" problem as seen in other posts. I was able to fix it however, by making changes in some of the address cards I was going to print. By editing the "parent", "child", "spouse" fields which will get added to the name line of the label, I was able to get labels to print (or pdf preview) without difficulty.
    I did not try and determine exactly what the problem was, but basically did a data cleanup. Since I didn't know that those fields would print, I had previously included information beyond just a name in the fields, like birthdates and such, eg. "Jimmy - 12/1/05". After either removing the fields entirely where I didn't really need them, or just cleaning them down to names only, they printed just fine. I'd considered trying to disable the feature entirely but the data cleanup was not hard for a dozen or so names.

  • Add Attendees (name AND phone no.) from Address Book to iCal for iPhone use

    Hello scripting gurus and newbs alike.
    I've looked through the forums, but can't find a COMPLETE solution to what I believe should be a fairly straightforward problem. I'll start by asking the question as concisely as I can, then bring in more information about what I have tried, and learned, so far. I'll also outline my broad (mini) project aims at the end, in case anyone is interested.
    * Q: How can I add attendees, from my Address Book, to an iCal event, so that **ALL** the attendee details are included?
    Note: It is VITAL to me that attendees' phone number(s) are available through iCal, not just {display name, email, participation status}. This is because I want MobileMe to synch the event with my iPhone, so I can call attendees directly from iCal. (or at least have iCal open the attendee's Contacts record so I can call from there!)
    WHY DO I THINK IT SHOULD BE POSSIBLE?
    Manually, I can simply dbl-click on the event, click into the attendees field, start typing the attendee name, and hit enter. When I do this, it works. MobileMe synchs it to the iPhone, I open iCal, select the event, tap the attendee, and I'm calling.
    WHAT I'VE TRIED USING APPLESCRIPT
    When I try the following script, I've only managed to set Sheila's name/email/participation status. I can retrieve her phone number from Address Book using the above approach, but unsure how to make it stick in iCal * such that I am able to use it to call directly from iCal on the iPhone *
    ++++++++++++++++++++++
    tell application "Address Book"
    set anAttendee to name of (first person whose name contains "Sheila")
    end tell
    tell application "iCal"
    set newEvent to make new event at end with properties ¬
    {summary:"Meeting Info.", location:"ZIP", description:"More yak", start date:SD, end date:SD + 120 * minutes}
    make new attendee at end of attendees of newEvent with properties {display name:anAttendee}
    end tell
    ++++++++++++++++++++++
    WHERE I'VE LOOKED FOR SIMILAR EXAMPLES
    Thanks to Rob (et al) for providing script examples used to create the above, see here: http://macscripter.net/viewtopic.php?id=5692
    I've also looked at the following article, which makes me think I somehow need to use the PERSON ID in the event attendee list. Unfortunately, I have only managed to retrieve the ID, but had no joy trying to set it.
    http://www.mactech.com/articles/mactech … index.html
    THE PROJECT
    I'm a surveyor, and using dialog(s) to enter relevant info., I'm looking to streamline my preparation for surveys when I make each new appointment.
    My mini-project presently enables me to print survey forms (based on a Pages template) with details relating to the specific property (address/contact name&no./appointment date&time etc.) It also uses the appointment date&time to create the appropriate event in iCal.
    I'm also confident I can add the contact details, such as agent/owner name(s) and phone number(s) in Address Book.
    IF I COULD ONLY ADD THESE AS ATTENDEE(S), AS IF ADDED MANUALLY, I WOULD ALSO BE ABLE TO PHONE THE PROPERTY OWNERS WITH A COURTEOUS REMINDER WHEN I'M ON THE WAY!!
    Can anyone help me achieve this?
    Here's hoping.
    Phil (wiimixer)

    Phil
    Referencing the attendee in iCal will only directly record the properties you mention - because that's how it's designed to work and there's no way around the restriction unless iCal is changed.
    You could set the phone number elsewhere in the iCal event - e.g. notes, location, ... - and that would probably allow you to call from iCal (I don't have an iPhone so I can't be sure), but I am not sure I see the advantage over using the link to iPhone's Address Book which is set up by adding an attendee to the event. This might be because I am being dense, so if this is the case please elaborate.
    EDIT:
    I have read your original post in more detail since I wrote the above. It seems to me that you are saying that when you add the person to the iCal event via AppleScript that you do not get the link to the iPhone's Address Book when you sync via MobileMe. You imply, however, that it does work when you type the name manually. Are these both correct statements?
    Message was edited by: Bernard Harte

  • Printing Mailing Labels from Address Book

    Stupid question, but one that is driving me crazy.
    How do you print a sheet of mailing labels from Address Book but when the entire sheet of labels is the SAME label?
    I can print labels successfully in address book, can select the label type and number, etc.
    However, when I select a single contact, I can't find a way to print up an entire sheet of labels (e.g. 14) of all the same contact - it only prints one label of the single contact.
    Please help! I know it must be a simple fix but can't find it anywhere to select as an option.

    OK, weird that this morning (one day after you posted this question) I had the same question. I just want to print some return address labels for my own company. While I haven't been able to find a software based way to do it, I did think up a workable (if a bit ridiculous) hack. Copy the address you want to fill the sheet of labels with however many times there are labels on the sheet and select those however many copies and click print! I created 30 copies of my own company's address in Address Book, selected them, and printed a sheet of labels without problem. A bit dumb, but it works!
    Hope that helps.

  • ICal incorrectly takes name from Address Book to show in birthday calendar

    When I-Cal takes the name of a birthday person from Address Book to post a reminder on the birthday calendar of I-Cal it shows the first name as though it was the last name. I have verified this problem by reversing the names in Address Book, whereupon I-Cal shows the name correctly in the birthday calendar.
    Obviously the program is defective and needs to be corrected.

    You probably have not clicked the "show birthday calander" in the ical preferences pane

  • Wrong Number is dialed from Address Book

    Hi all,
    i have the following problem on my BBerry pearl 8100:
    I have various international numbers saved in the Address Book and they all get dialed wrong (one zero is removed) from Address Book. For example: 003906505152 is the correct number, but dialing from Address Book will get 00396505152 dialed.
    Anyone has ideas? Basically I cannot use the Address Book for itnernational numbers because it is useless.
    Thanks a lot!

    Try setting your options at Call Log > Menu > Smart Dialing correctly. That is usually the source of most international dialing issues.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • No longer able to send text message from Address Book

    For a long time, I've sent text messages from Address Book, via Bluetooth and my SE phone. However, all of a sudden, the messages are no longer being received by the receipents, despite them appearing to be sent.
    Any ideas what's wrong?
    Thanks
    Phil

    I had the same problem. This worked for me:
    http://www.macosxhints.com/article.php?story=20050731124746116
    Giles
    PowerBook G4   Mac OS X (10.4.5)   Sony Ericsson k750i

  • Printing multiple envelopes from address book with Lion

    I am having trouble getting envelopes to print properly from Address Book in Lion.  I have specified size #10 envelopes.  When I print them, the text printed on successive envelopes moves further and further down the page until the address drops off of one envelope and is then printed at the top of the next envelope.  If I print to PDF, I see the same behavior.  I have an HP Photosmart Premium printer.  I didn't have this problem before I upgraded to Lion, and all my settings are the same as they were prior to the upgrade.  I have seen that other users have the same problem on the forums, but there isn't a clear cut answer to how to solve the problem anywhere.  I also tried using the easy envelopes widget, and I still have the creeping further down the envelope problem.  HELP!!!

    It seems to be a bug in Lion. Try the solutions provided in other disucssions about changing print size and orientation. Create a custom size and save it. You should be able to test it by printing to pdf first to check it. That way you won't have to waste paper.
    https://discussions.apple.com/message/18390621#18390621
    https://discussions.apple.com/message/18504818#18504818

  • Can I print Dymo labels directly from Address Book?

    That would be cool. But I end up launching Dymo's crap app and cutting and pasting every address into a label I want to print.

    I agree with the previous posts that Dymo's Label Software is satisfactory when you choose to use Apple's Address Book app. However, I frequently want to print a single label from Address Book, and I don't like to waste time launching Dymo's app and scrolling (no search function!) through my addresses.
    Here's the solution I have used to print a single address label from Address Book (v. 3.1.2) to my LabelWriter Twin Turbo:
    (1) With the address selected in Address Book, got to File > Print ...
    (2) Choose "Dymo Labelwriter" from the Printer drop-down menu
    (3) Under the "Layout" tab (not "List"), be sure "Dymo" & "Shipping Labels" is selected from the Page drop-down. (It seems counter-intuitive to select shipping labels when you're printing address labels, but it's the only workaround I've found, and you'll modify the margins in step #4.)
    (4) Now select "Define Custom ..." from the Page drop-down menu and give it a new name (e.g. "Dymo Address") (+At this point, the label preview on the left should look like a big shipping label still+.)
    (5) Modify the margins of your custom page layout (in inches) to Top=1.200 Bottom=0.000 Left=0.500 Right=0.250
    (6) Print a sample copy and adjust margins to suit your needs
    If you wonder why this circuitous route works, +so do I+. If you don't want to read my proposed explanation, simply follow the steps above and stop reading. If you'd like to know what I think is happening, feel free to read on:
    As best I can discern, Address Book is sending the print job to the Labelwriter, assuming the label spool is *centered on the spindle*. As you know, that's not the case. However, when you tell Address Book you're printing on a large shipping label, which takes up most of the spindle anyway, you can then adjust the margins (esp. the top margin) to print only on the "bottom half" of the shipping label. That means you've defined margins suitable to print on the actual address labels installed on the left side of the spindle.
    Message was edited by: The Divining Ape
    Message was edited by: The Divining Ape

  • How to clear image in sender label to print envelopes from Address Book

    Hello!
    I had been printing envelopes for greeting cards using Address Book. I had always ignored the "Image" option under "Label" for the +sender's information+. Today I decided to explore this option and clicked on "Set". Then I chose a picture from my "Pictures" folder. It looks nice and I was able to change the picture several times, but now _I do not want any "image" in the sender's label_.
    *How do reset the "Image" to none?*
    Thank you in advance for your assistance!
    Osk Asks

    Hello captfred! Thank you for your reply. I tried to do what you suggested but it seems that it only works for cards in my contacts or for my own card. My problem is within the settings under label when I am printing from Address Book.
    This is how I have been doing it:
    1) Select a contact or a group of contacts
    2) Click on File on the top of the screen and then select Print
    3) A window pops up and there I can choose whether I want to print an envelope, a list, or mailing labels
    4) In that same window is where I clicked on "Image" and "Set"
    5) Finally I click on "Print" on the bottom right corner and I get neat envelopes with my address (sender) and the recipients (my contacts)
    I hope this helps you to help me!
    Thanks in advance!
    Osk Asks

  • Outlook 2011 problem syncing contacts with address book

    I am aware that Lion has broken the sync ability of Outlook 2011 with Address Book. Hopefullly this will be fixed at some point.
    So my problem is that I have decided to use a workaround to get my Address Book contents into Outlook 2011. I am not concerned with further syncing at this point. I just want to get my addresses into Outlook and hope a better fix is offered at some point.
    About the only way I could figure out how to do this was to export my Address Book as vCard. I then imported the vCard file into Gmail and then exported that as a CSV file. It contained 550 addresses. I opened it in Excel and it contained 550 rows. Great so far.
    I then Imported into Outlook 2011 and chose import a text file. When the mapping window opened, it showed over 890 files instead of 550 and the fields were not mapped correctly. I could not complete the import because it was so screwed up.
    So I'm back to square one and very frustrated. There must be others who have the same issue and maybe have figured out a way to do this. Please help.

    Hi Michael Erb1,
    As per your issue,  i.e Outlook 2011 problem syncing contacts with address book, activation of this issue is usually can solve out through various ways. One of the simplest way,  i.e by restarting Outlook 2011 application and need to chase few necessary steps which are clearly mentioned below blog link, from where you can utilize this method and can get a proper solution for Sync Outlook 2011 for Mac with Mac Address Book.
    Source link: http://www.blogs.olmtopst.com/how-to-sync-outlook-2011-for-mac-with-mac-address- book.html
    Hope this information will assist you and makes you competent to Sync Outlook 2011 for Mac with Mac Address Book easily.

Maybe you are looking for