Problems printing a converted PDF which was converted to Word after completing the form

Problems printing a converted PDF which was converted to Word after completing the form. I have spent the last 3 hours trying to figure out what I am doing incorrectly. I can't get it to print in either the PDF or Word file. Please help, I need to complete this form and sent it NJ Department of Motor Vehicles Commission.

Hi, make sure you are using the latest release of PDF program.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

Trying to convert pdf documents in Spanish to word documents but the converted file prints gibberish

I have been trying to convert PDF documents in Spanish to Word documents but when I down load the converted word document it does not convert in Spanish it is totally unreadable "gibberish" I have tried clicking on recognizint the lenguage and do not recognize text but I still get gibberish?
is it possible to convet files in spanish?
Can anybody help?
Thanks
Olga

Hi frysky
Please Refer : http://forums.adobe.com/message/5200374#5200374

Convert PDF with Arabic content to word /Excel .

I have problem , I plan to buy Adobe acrobat pro for my ORG , The main target to buy it , to convert PDF a Arabic content to word or Excel , I download trial version from Adobe acrobat pro , and when i convert PDF English content it's fine , but when i convert PDF with Arabic content , the result is bad the word become letters and the documents become not readable , Pleas help me cause the main target is convert Arabic PDF to Word .
" the mean problem is when i convert PDF with Arabic content to word the result is bad the document become unreadable .
thanks , wait for replay.

HI,
Adobe Acrobat is a special PDF viewer which is technically develop for the whole world to read any PDF file which a user wants to read. It's basic languages are:
English (US)
English (UK)
Arabic
Italian
Japanese
Spanish
German
But when you going to export the PDF file the arabic language will not support.
Regards,
Florence

FM to Convert PDF file to Excel or Word Doc

Hi All,
I am Looking for FM which converts PDF file to EXCEL or Word Doc.
Thanks in Advance
Santu

I would suggest asking in the Export PDF forum, giving full details about your problem and your setup: Adobe ExportPDF (read only)

Hi i upgrade from lion to mountain lion to day on my mini mac,Since the upgrade i am getting no sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever

Hi i upgraded from lion to mountain lion to day on my mini mac,Since the upgrade i am no longer getting sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever.Any one any ideas?
I use a samsung TV for my monitor via HDMI.Tried all the system Audi setting nothing .Head phone and internal speakers are fine.

Similar issue; Audio was working fine on Lion, now not on Mountain Lion. Have a Macbook Pro early 2011 with AMD Radeon HD 6750M, connected by thunderbolt through a Lacie LBD to a mini-displayport to HDMI adapter (n.b. same problem when not going through the LBD) to a Pioneer VSX 521 AV receiver. For me when I go into audio Midi settings all the volume sliders for the displayport device are greyed out and at zero. But when I click 'configure speakers', it's able to send out the test signals to each speaker. Part of the problem could be that I'm not getting the option to put out 6channel sound, only 2 or 8 channel. Since my system is Dolby 5.1, and I only have 6 speakers, I would have expected the 6ch option to be available. But I imagine there's more to it than that. Elsewhere someone has suggested playing with Remote Interactive over HD on an Onkyo device; I'll see if there's something similar on the Pioneer that can be changed. Any other suggestions welcome.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

My form was created by FormsCentral. I save as a PDF and emailed it to all of my club members. When they complete the form, save it, and email it back to me, I get a blank form. Why?

My form was created by FormsCentral. I save as a PDF and emailed it to all of my club members. When they complete the form, save it, and email it back to me, I get a blank form. Why?

If you had iCloud backup turned on, and it made a backup - yes. If you didn't have iCloud backup turned on - but were using iCloud for Contacts, calendars, etc. You will get the contacts and calendars, etc back.
Purchases made with your appleID can be redownloaded as long as they are still available in the iTunes store.
If you connected your phone to a computer with iTunes, there may be a backup on there as well.

How to merge PDF/Word Doc with the Form I created?

Hi All,
Which software should I use to merger PDF/Word Doc with the form I created.
One more question is I want the form page to show up right next to the ending or in the middle of the word doc . How to manange the placement of the sections?
Please do let me know, its urgent.
Thanks and Regards,
Hari.

1) The option of creating the whole thing as a LiveCycle form means that you need to convert the Word document using LiveCycle Designer. The import utility won't preserve the fidelity of the Word document the way printing to the PDF print driver does. It will likely require a fair bit of tweaking in Designer to get it looking like you want. You will likely get frustrated, since Designer is not a word processor.
2) You can create PDF forms in Acrobat without launching LiveCycle Designer. While they look the same to a user as forms created with LiveCycle Designer, behind the scenes they are very different. When you create a form in Acrobat you overlay fields on top of an existing PDF document that you had previously created using the PDF print driver. There is an extensive scripting model for these "Acroforms". The technology pre-dates LiveCycle yet Adobe continues to improve the two forms models in parallel. In Acrobat, open a PDF and select tools-->forms-->show forms toolbar.
3) I recommend this option if it's feasible. I don't know what you mean by "doesn't show up in a flow". If you're going to use the form in Acrobat 7, then save it as Acrobat 7 compatible in LiveCycle Designer. This is one of the options in the Save As dialog of LiveCycle Designer.
Jared Langdon
http://www.jlangdon.ca

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer?

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer? I was using Explorer 11 and Windows 7, installed on an HP Pavilion g series

Never heard of that being caused by installing iTunes. Try asking on a Windows forum. This isn't a problem with iTunes or any other Apple product. If you believe it is, uninstall iTunes. If the problem persists, you'll have to seek advice on a Windows forum or contact Microsoft for support.

Standby database(11g) was still in sync after stopping the primary and standby database listener.

Hello !!!
I have noticed that my standby database(11g) was still in sync after stopping the primary and standby database listener.
If this is the case then how log is transferring from primary to standby ? it is not using listener service ? kindly clarify

Read this Metalink Note:407040.1

Error"There was an internal error when submitting the form" URM Disposition

Hello
I get the following error - "*There was an internal error when submitting the form*" - when i allocate a Retention Disposition to a Retention Category.
Any Ideas how this can be solved?
Thank you

Not based on the minimal information provided.
Error messages in 11g, from a UI standpoint, are severely deficient. How about looking in the content server logs and posting some more information?

How do yo turn a pdf file into reader so i can edit the form?

how do yo turn a pdf file into reader so i can edit the form?

I have no idea what you are trying to say; your are trying to open a PDF with Reader?

I was updating my macbookpro, after that the screen is all in black, what happen? :(

I was updating my macbookpro, after that the screen is all in black, what happen? :(

What update? What operating system is running on the Macbook Pro?
(iOS 6.1.1 as your profile shows is an operating system for an iPhone, iPad not a Mac).

INSERTING SRID of 8307 into SDO, which was converted from wkt

Basically i have some SDO data that was converted to WKT text format and now i am trying to load it back using sqlldr. The problem seems to be that when you convert SDO_GEOMETRY to wkt it NULLS the SRID. We have a SRID of 8307. So the question is how do i insert this back into the SDO_GEOMETRY.
This is what i have tried and doesn't seem to work:
create or replace function convert_wkt_to_sdo ( p_data in clob )
return mdsys.sdo_geometry
as
p_data_final sdo_geometry;
begin
p_data_final := sdo_util.from_wktgeometry ( p_data );
return REGEXP_REPLACE (p_data_final, 'NULL SDO', '8307 SDO');
end;
Anyway of doing this?
In the sqlldr ctl file geo fields look like this
POINT_SPATIAL_DATA BOUNDFILLER,
POINT_SPATIAL EXPRESSION "conver_wkt_to_sdo( : POINT_SPATIAL_DATA)"

You might try something like:
create or replace function convert_wkt_to_sdo
    p_data in clob
return mdsys.sdo_geometry
as
    p_data_final sdo_geometry;
begin
    p_data_final := sdo_util.from_wktgeometry(p_data);
    p_data_final.sdo_srid := 8307;
    return p_data_final;
end;Instead of hard coding the SRID in the function as 8307, you might consider passing it as an argument instead (in which case you'd need to change the expression in your SQL*Loader control file).
Hope this helps

Problem in playing back mp3 which was recorded as wav file

Hi all,
I have recorded sound using my program. It uses classes like AudioSystem. And it's
able to record and play also. but in my site I have an mp3 player. So i thought of converting the recorded wav file into mp3. For this i used LAME utility in Linux. And it was converted. Also it is being played in normal players like Winamp. But when i try to play this converted mp3 file using my player in my site it's having problem. Why is it like that?
Should i do something while capturing the sound from microphone so that it can be converted into mp3 format??
Or
Can I directly capture voice to an mp3 file??
In my program,
targetDataLine.open(audioFormat) where audioFormat is like
float sampleRate = 8000.0F;
int sampleSizeInBits = 16;
int channels = 1;
boolean signed = true;
boolean bigEndian = false;
Should I do something more or change something??
Please help me...
Thanx and Regards,
sand...

Thanks Walter.
Unfortunately, the same issue happens... In whichever window I select "Bounce" from -- Environment, Audio Mixer, or even FILE > BOUNCE -- a window titled "Bounce 'Output 1-2' " pops up. I'm guessing this is what you mean by the "Bounce Output Window." But, there I'm only able to name the file in the "Save As" field, choose where to bounce the file to on my harddrive, and then click on "Bounce" in the bottom-right of the window. I have no tabs or anything else to choose from. So I'm still a little stumped. Any additional thoughts?
I really appreciate the help.

Problems printing a converted PDF which was converted to Word after completing the form

Similar Messages

Maybe you are looking for