Problems printing a PDF-TopMargin cuts off

I have a PDF which has been forwarded to me.  When I try to
print it the top margin is cut off.  In other words, the top line and a half of text is not there and the document prints way at the top of the page.  This document is several pages and on each page ther text only takes up the top 3/4 of the page, so there is plent of room to shift the document down on the page and not lose anything.  Is there some way this can be done?  I have tried to find somethign in several of the menu's but haven't found anything.  If there is no way to shift the whole document down when printing, then can anyone shed any light on why this forwarded document has this problem?  Thanks.

You can crop pages in Acrobat to fix things, not Reader. You can try to Print with Page Scaling to Shrink to Printable Area.

Similar Messages

  • I created a magazine using a IDD template including bleeds. When I exported to make a PDF, it cut off part of the document when uploading for printing. When I incude bleeds, it makes the document too big for printing. I need help :)

    I created a magazine using a template including bleeds. When I exported to make a PDF, it cut off part of the document when uploading for printing. When I incude bleeds, it makes the document too big for printing. I need help

    eehenry wrote:
    It is a problem with a secondary provider, "mag cloud" .
    Right, so to advise you we'd need to know the particulars of MagCloud's spec for your project; format, trim size, bleed, etc.
    It's doubtful that anything happened "when uploading for printing," so long as you were uploading a PDF, as opposed to the native InDesign file. Did the PDF look right to you before uploading?

  • When printing a highlighted (selected) print range from an internet item pulled up through Firefox, the first line of the selected range is not printing or is partially cut off.

    When printing a highlighted (selected) print range from an internet item pulled up through Firefox, the first line of the selected range is not printing or is partially cut off. This is not an issue with my printer, as printer prints the whole selected print range when using Internet Explorer or Word Doc applications. The problem only happens when using Firefox. Please advise on how to fix this. Is this a settings issue or do I need to download and update? Thx

    * [[Printing a web page]]
    * [[Firefox prints incorrectly]]
    Check and tell if its working.

  • Problem printing Online PDF file

    Have a strange problem printing online PDF files. The printer prints all other documents ok - Word, Pages, PDF files that are stored on disk etc. However when i try and print a PDF file online - i.e. online job application form, the printer goes into melt down. It will only print part of the first page then stops. The drive wheel pushes the paper back and forth a few times then stops. I can print each page one at a time but won't let me print all at once.
    Any ideas? It does this regardless of which computer I use (both mac's). Makes no difference if the printer is connected direct via USB or Airport.
    Any ideas?
    Colin.

    What kind of printer is it? Is the software up to date? Is it possible to provide the URL of the page you are trying to print?

  • Ordered prints. Several were cut off at edges or were printed off center. How do I prevent this in the future?

    Ordered prints from my Mac library to Apple. Several came back cut off or printed off-center. How do I prevent this in the future?

    How do I prevent this in the future?
    Before ordering any print product proof it by creating a PDF file of it according to this Apple document:    iPhoto, Aperture: Previewing an order in iPhoto or Aperture.  Save the PDF file to compare with the printed copy when it arrives.
    For this book contact Apple via the 800-275-2273 phone number. Apple has been very good a correcting problems.  They gave me a refund so I could order again.

  • Problems printing Interactive PDFs built in InDesign CS5

    I am having issues printing PDFs that I have exported from InD CS5. I am creating interactivity in InD, such as buttons, click on, roll off, etc. The interactivity works perfectly, however, when I try to print, the PDF, the rollovers print, even though I do not want them to. The rollovers go away once I click through all of the buttons, but I do not want to have to have my client have to click through all buttons first, before successfully printing the PDF without the rollovers.
    anyone have any experience with this? or solutions?
    thanks,
    aligori

    @CoGordo4:
    If the answer for Peter's question is "yes", I suspect the following:
    You export to PDF with the option "Export Layers: All Layers" and you have a layer set to "Show Layer" NOT checked in the Layer Options panel above your graphic with an object that obscures your vector graphic filled with the color of your background. Thus the image will be included in your exported PDF but effectively does not show.
    If so, just export with "Export Layers: Visible & Printable Layers".
    If this is NOT the case then we possibly could circumvent the problem:
    Is your placed vector graphic of the file type EPS?
    Do you have Acrobat Pro and Acrobat Distiller installed?
    If so, try to convert that EPS to PDF using Distiller, preflight it with Acrobat Pro and place the PDF.
    If the answer is "no" (you could not see your graphic in Preview mode), some of the following could apply:
    1. The holding frame of the graphic OR the graphic inside the holding frame is marked as "Nonprinting" in the attributes palette (check both instances).
    2. The object is positioned on a layer with "Print Layer" NOT checked in the Layer Options panel and you export with "Export Layers: Visible & Printable Layers" in your PDF export settings.
    Uwe

  • Label in PDF Report cut off when using font aliasing (9i2)

    Hello.
    I have a report and one label on the report that is a bit longer than the rest.
    This label is displayed correctly in the reports builder, in the HTML report and as PDF when font aliasing is off.
    But if the PDF report is generated when font aliasing is used - the label is cut off.
    The label is displayed up to the point where it would finish without font-aliasing. (the alias font is a bit broader)
    The field spans the whole page in the paper layout, and every char-width value I use has width 1000, so I'd guess that ain't the problem (also since the non-aliased is displayed correctly) (Btw, the string is 84 byte long)
    The pdf is generated via a url like:
    http://server:8888/reports/rwservlet?report='timereport.rdf'&userid=xx/yy@mydb&destype=CACHE&desformat=PDF&<...paramters...>&filename=/TR_20050703_1300_20050711_0500.pdf
    Any ideas?
    best regards,
    Martin
    Version Info:
    Report Builder 9.0.2.0.3
    ORACLE Server Release 9.0.1.3.1
    Oracle Procedure Builder 9.0.2.0.7
    Oracle ORACLE PL/SQL V9.0.1.3.0 - Production
    Oracle CORE     9.0.1.2.0     Production
    Oracle Tools Integration Services 9.0.2.0.0
    Oracle Tools Common Area 9.0.1.0.0
    Oracle Toolkit 2 für Windows 32-Bit-Plattformen 9.0.4.0.23
    Resource Object Store 9.0.1.0.1
    Oracle Help 9.0.4.0.23
    Oracle Sqlmgr 9.0.2.0.2
    Oracle Query Builder 9.0.2.0.0 - Production
    PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
    Oracle ZRC 9.0.2.0.2
    Oracle XDK Java 9.0.2.0.0 Production
    Oracle Virtual Graphics System 9.0.1.5.0
    Oracle Image 9.0.4.0.9
    Oracle Multimedia Widget 9.0.4.0.9
    Oracle Tools GUI Utilities 9.0.4.0.9

    Hi Scot
    Just replied to your email re. conf call.
    In the meantime.
    1st question.  
        Some of our developers are creating the reports under crystal 2008, while some are 2011.
        Could this be a problem, when they are run by the SDK?
        Should we upgrade all our developers to crystal 2011?
    The version of CR a report is created in should not matter at all. I am 100% certain this is not the issue.
    2nd question
        When the report is run, to create the pdf... why would it actually embed the font on the pdf?
        if they weren't embedded.. wouldn't it just pull up the proper font, if the user's pc had that font on their
        pc?
        if it does the common fonts aren't embedded, we would just have to worry about the things like
        barcode 3 of 9
    I can not answer this as that essentially is the way the product is designed. It may look like a limitation, but there are no work-arounds and I would not consider this to be a bug. Perhaps an enhancement, but a pretty faint hope there. And even if, enhancements take very, very low priority and take long, long time before implementation.
    3rd question
        Would the fonts, just need to be installed on the server?   we've seen some indication, that they
        also need to be in a java sub-directory
    The fonts must be on the server as that is where the report engine does it's work, then the report is streamed to the user's browser. E.g.; there is no work done on the browser. Also, the process must have rights to access the fonts.
    One last point. You mention deployment to Linux. Linux is not supported. Please see: SAP Crystal Reports, Developer Version for Microsoft Visual Studio - Supported Platforms
    I suspect this is more an issue with CR not working with the framework for Linux.
    - Ludek

  • HP deskjet printing issue - alternate line cut off and blocks

    Hi guys recently bought a deskjet 3050 and it started printing fine, when i had to print out a large document (roughly about 30 pages) it started to cut out sections of text and replacing them with black blocks.
    now when printing it prints the first line fine then the second line is half missing and some words are replaced with black blocks. then the next line is fine, the next is cut off and blocks again and so it continues.
    it only does this with black ink and not colours.
    anyone know a solution?

    It sounds like the black cartridge has failed electrically.  Try printing a diagnostic page as shown in Solution 6 of the page here.  Does this print properly?  I suspect the black nozzle pattern in the upper right will be corrupted.  You might try removing the cartrdige and cleaning the electrical contacts but I suspect the cartridge will need to be replaced.  You can check the cartrdige warranty as shown here assuming it is an original HP cartridge.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Print bordless page, margin cut off

    Hello ,
    I have a problem on printing on bordless page type. Even though I set up thepage to have 0 margins (the printer allows me this - so I am not forcing it to 0), I have 2 possible situations:
    - if I use the setPageable, before printing I will have the image considered to be at 0,0 , but the printer leaves a margins, so the image looks cut off
    - if I use setPrintable(..) then the image is printed from a certain margin, the image is no longer cut off, but is not on 0,0 either.
    Any sugestions?
    Many thnx in advance!

    Here is some code:
    pageFormat - is an object taken from a page Format dialog, one of my own, the values passed from there are OK.
    PrintRequestAttributeSet attributeSet = new HashPrintRequestAttributeSet();
                   MediaPrintableArea mediaPrintableArea;
                   mediaPrintableArea = new MediaPrintableArea((float) (pageFormat
                             .getPaper().getImageableX() / 72), (float) (pageFormat
                             .getPaper().getImageableY() / 72), (float) (pageFormat
                             .getPaper().getImageableWidth() / 72), (float) (pageFormat
                             .getPaper().getImageableHeight() / 72), MediaSize.INCH);
                   attributeSet.add(mediaPrintableArea);
                   attributeSet.add(pagePrintFormat.getMediaName());
                   if (pagePrintFormat.getPageFormat().getOrientation() == PageFormat.PORTRAIT) {
                        attributeSet.add(OrientationRequested.PORTRAIT);
                   } else {
                        attributeSet.add(OrientationRequested.LANDSCAPE);
                   if (this.printJob.printDialog(attributeSet))
                        try {...printing job...}
    Message was edited by:
    bibica

  • MX432 All-in-one printer: left side of printed subject is being cut off when using 'normal' layout.

    Because 'normal' and 'fit to page' layouts cut off left side of printed material I'm using 'borderless' layout but that doesn't give me the paper size option I need.  Any hints on how to save the left side of paper and how to change paper size in borderless layout.  Any hints in print preview wherein I can print just 'one or two'  of multiple pages without having to return to the set-up page?

    Hi vitaminsg,
    You can set it so that "Fit to Page" printing is the default setting.  To do this, use the following steps:
    1.  Click Start.
    2.  Click Control Panel.
    3.  Click Printers and other Hardware.
    4.  Click Printers and Faxes.
    5.  Right click the PIXMA MX432 and click Printing Preferences.
    6.  Click the Page Setup Tab.
    7.  Select Fit to Page under Page Layout, then press OK.
    This should now be the default setting for all programs.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Problem printing borderless PDF w/ Snow Leopard + Acrobat Pro 9 + MS Office

    Create a borderless Word doc in MS Office 2008 (text or images go all the way to the edge).
    Using OS X 10.5, you can select "Print to PDF" and it will print a borderless PDF. Beautiful.
    Using OX X 10.6 (Snow Leopard), that's now impossible because Snow Leopard is incompatible with the Acrobat 9 PDF print engine. (See this article: http://kb2.adobe.com/cps/509/cpsid_50981.html )
    Is there a solution?
    This is a Snow Leopard problem, so Apple must be responsible for the solution. It worked beautifully with 10.5, and now an upgrade renders it entirely useless.
    Please help urgently.

    ozxx wrote:
    I use US Letter and A4 page sizes frequently, but have been known to use other sizes as well. A custom hack would be great, thank-you.
    Download CUPS-PDF from the link above. Download my PPD file with borderless A4 and US Letter from: http://etresoft.org/opensource/PostscriptBorderless.zip
    Copy the PPD file somewhere convenient on your system. Go to System Preferences > Print & Fax > + (to add a printer).
    Select CUPS-PDF. In the Print Using pop-up, select "Other" and choose my PPD file. Click the Add button.
    Now when you print to CUPS-PDF, you will be able to select borderless A4 and borderless US letter. Your PDF files will show up in /Users/Shared/CUPS-PDF/<your user account>/
    Although the underlying issue still remains.
    That Adobe's PDF Printer doesn't work? Yes. I agree.
    (To be honest, I think both of the companies should be working on solutions as urgently as possible as it's disrespectful to their long-term customers.)
    Again, I agree. While I am certainly biased towards Apple, in most cases (and especially this case), it is Adobe that needs to get their act in gear. Snow Leopard was released over a year ago. Adobe had pre-release copies long before that. Their PDF printer still doesn't work. Some random guys on the internet (the authors of CUPS-PDF for MacOS X and me) were about to make the 5 minute (no exaggeration!) changes required to produce a functional virtual printer for Snow Leopard. Why can't Adobe?
    Feel free to forward that to Adobe http://www.adobe.com/bin/webfeedback.cgi

  • Problem printing a pdf

    When I go to print a pdf from my new macbook pro to a hp laserjet 1200 it takes 20+min to start printing.  If I try to print 50 pages it may only print one.  Printer works fine with my toshiba laptop.  Both connect via usb

    Try restting the NVRAM and other parameters of the printer:
    While the printer is on, press               and hold the Go button for 5 seconds. This will reset the printer.              
    To reset the NVRAM. Turn the printer off. Press and hold the Go               button for 20 seconds while powering on the printer.

  • Problems printing a pdf

    how do i print a pdf file without the 'evaluation only. created with aspose.pdf.kit' printed across each page?  i have never had this problem with any previous printer. i have an hp photosmart 6515, my os is win7 32 bit on an asus netbook. 
    thanks for your help

    Hi again robysam,
    I did some digging and it looks like the issue is with the Aspose.Pdf.Kit software.
    Per http://www.aspose.com/documentation/.net-components/aspose.pdf.kit-for-.net/licensing.html,
    "Evaluation version of Aspose.Pdf.Kit (without a license specified) provides full product functionality, but please Note : At top of all pages in the generated Pdf documents are watermarked with "Evaluation Only. Created with Aspose.Pdf. Copyright 2002-2005 Aspose Pty Ltd" as demos run with an Evaluation License."
    The site says that after your trial expires (after 30 days), you will begin to see the the text on each of your PDF files.
    You can apply for a temporary license by following a link on that page or follow the directions on the page to get a license.
    I'm not sure why the text only started showing up after you installed the HP 6515 printer, though. It could be a case of bad timing.
    Thank you,
    Narissara
    I work for HP.
    Did my response help with your issue? Please give me Kudos by clicking the "Kudos" button to the left. Thank you!

  • Problem with Airplay Mirroring: Image Cut Off

    I have a mid 2011 Macbook Pro.   I have installed Mountain Lion.   I am able to activate Airplay Mirroring, however, part of the image is cut off.   In other words, what is shown on my TV is only about 2/3 of the image that is shown on my macbook.    It is not showing a black bar, or anything like that.   It is more like the image is enlarged and doesn't fit on the TV screen.   
    I have searched the internet trying to find a solution.   I haven't found anyone with this problem.   So, my question is, do I have some settings wrong?   Or is it a problem with the settings on my TV?   If anyone has suggestions for troubleshooting this problem I would be grateful!   I really want to use airplay!
    Thanks!

    OK, I am replying to my own question!    My husband just found a thread solving this problem.
    https://discussions.apple.com/message/19070883#19070883#19070883
    We changed the video settings on the Apple TV to 'auto', and restarted.   It works great now!

  • Problem printing scanned PDF document from iPad to HP Photosmart Plus B209a

    Hi,
    I'd like to report a problem printing a scanned PDF document from iPad via HP ePrint application to my HP Photosmart Plus B209a printer. The document was sent to the printer without any issue. However, the printer only prints out the
     screenshot image in the center of the PDF page, and the image is enlarged and rotated to fit in an A4 paper. The rest of the document is simply ignored by the printer. The document with the problem can be downloaded in the link below:
    Download PDF document with the problem
    What could be wrong? Thank you in advance!

    Thanks for the reply.
    I received the document from my teacher, so I don't know what program she used to scan it.
    I tried to print the document directly from my PC which works fine though, so I guess the document is OK.
    My HP printer is an old model which doesn't support eprint or air print, so I used the eprint application on iOS to print the document. I tried both color and black/white which gave me the same result: only the center screenshot image is printed out, and the image is enlarged and rotated to fit an A4 paper, the rest of the document is just ignored.
    What do you mean by saving it as a document?

Maybe you are looking for