Problems printing from Photoshop 4 to Canon Pro9000MarkII

Hi All,
This has only strting happening in the last two days - before that I have had no problems with this function. I am trying to print from Photoshop 4 on a PC to my Canon Pro9000MarkII.
When I print a document and tick the Scale to Fit Media box then everything is fine and it prints no problem.
When I try to print with this box unticked so that I can print at 100% scale I press OK and nothing happens.
We have tried to download the latest printer driver and this has not helped. I have played around with the Printer Preferences and this too has not helped. I have restarted Photoshop and the PC quite a few times - nothing!!
I have obviously missed some sort of setting but I don't know what - help!!!!

I am back and still having trouble with Lightroom. Someone suggested I downgrade to LR 4.1 (from 4.4) but that didn't help. To reiterate: I have a MacBook Pro, using 10.9.5. I got a new Epson Stylus Photo R2000 printer and LR is having trouble communicating with the printer. When I try to print a letter size (or other size) picture, a 5x7 partial tile of the picture prints off center bleeding to the top. The only way I can print a whole picture is the size it 5x7; then it prints the whole picture but it is still off center, not as it appears in LR print view. I have talked with Epson who said I had Mac conflicts; I spoke with Mac who got rid of the conflicts so it can print fine from Apple programs like Pages, or the internet. It is only LR that won't print right. Obviously I got a photo printer to print photos so I would like help resolving this. It has been very frustrating that although I could talk with both Apple and Epson support, when I tried to contact Adobe both by phone and Live chat I was told that LR is not supported except on this forum. So please, help. Thanks.

Similar Messages

Problem printing from Photoshop CS5.1 to Canon Pixma MX870

I downloaded most recent printer driver from Canon for my MX870 and with help from canon support I deleted previous printers in my computer and added in the new one. Also repaired permissions.
Other adobe software will print (InDesign, Acrobat) but not photoshop. When I select print, I am getting the following message: "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents" After attempting once I can't even get to the print dialogue box as the print selection is grayed out.
I am not sure what to do to get past this.
I have a new imac running OSX 10.9.2.

I was testing other Imacs running the same photoshop CS5.1 with the new printer drivers from canon and it prints. They are running OSX10.6.8. My new computer is running 10.9.2 and it will not print from photoshop. Is the driver not compatible with the operating system? Is there something to try other than saying the driver is at fault. Do I complain to Canon to update their driver to work? What is a work around?
Thanks,

Problems printing from illustrator to Canon printer

I have problems with printing from Illustrator CS4 to a Canon printer i-Sensys MF8050 (printing
from Illustrator to a Epson stylus Photo R2400 is no problem).
Printing from Photoshop to the Canon printer is also no problem. I
refreshed the preferences (did not help).
Operating System: Mac OS X (v10.6)
Printer driver version: 3.3
Usb connection
Canon believes it must be a problem with the illustrator program; it sends the wrong signs to
the printer.
After sending print to printer the printer reports that the A4 tray is empty, but is is still full.
What is going wrong, who can help me out?

Thanx Mike,
Reinstalled the printer softwear but it didn't resolve the problem.
But your suggestion to print illustrator pdf file in Acrobat is good solution for the moment.
I think something is wrong with Illustrator, because starting up the printing module is also taking a long time.
Did download the latest up date from illustrator to day, but that also didn't resolve the problem.
And you are right.... 3.3 is the fax driver

Problem Printing from Photoshop CS-5 (version 12.0) since installing Yosemite on iMac.

Any attempt to print from Photoshop CS-5 results in Photoshop crashing when I try to enter print settings such as paper profiles. I use several Macs and printers including an Epson Stylus Pro 4880 and a All-in-One Epson Workforce 7520. I have uninstalled and reinstalled Photoshop; uninstalled and reinstalled print drivers for both printers. I have the same printing problems with jpegs and raw files both large and small. I can print from the computers while using Yosemite if I print from other applications including InDesign CS-5. I think I have tried all the suggestions that have been offered in this forum.
Fortunately I have a Macbook that I forgot to upgrade. It has OS 10.9 and CS-4 installed and once I installed the Epson drivers, it worked! So, I can meet my deadlines but still would like to work from my large desktop machines. After long sessions with a very helpful Epson technician and carefully going through the comments in this forum, I am convinced the problem is in Apple's new operating system.

Which reminds me, update 10.10.1 is out. Have you installed it?
Also sometimes this works: Resetting your Photoshop Preferences from the keyboard:
Hold down cmd-opt-shift and start Photoshop and agree to "Delete the Adobe Photoshop Settings file"
Gene

Problems printing from photoshop CS4 with epson R2880

I just purchased an epson stylus photo R2880, I thought it was broken due to the fact that I could
not make prints from photoshopCS4.... it goes through all the motions and when its time to print, the soft ware just stops and nothing happens, no warning window, nothing, just no print, I have been three days with epson support by telephone and we have gone through every possible scenario. I have repaired permissions, I have repaired the disks, I have reinstalled all drivers and I can print
from iphoto, from epson software, Lightroom and from preview but not from photoshop, I am at my wits end...I have my agent in Italy asking for three new portfolios and I cannot deliver. please help
Browser: Safari
Operating System: Macintosh
Printer model / driver version: epson stylus photo R2880

In conjunction with Jeff's suggestion, I suggest that you remove all of Epson's preferences for your preference folder especially if you are experience some other issues with other software. And especially if you have 10.6.1 installed.

Problems printing from Photoshop CS6 on Mac to Epson 9890

Why when printing on this plotter, makes some blank spaces and intermittent lines? The heads were cleaned. If someone knows about it, please let me know. Thanks.

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
To help others help you, please read through this article and provide any additional relevant details.

Problems printing from photoshop after updating MAC

Since updating my MAC, photoshop 'unexpectedly quits' when I try to print. Please can you help?

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
To help others help you, please read through this article and provide any additional relevant details.

Problems printing from Photoshop CS6 on Epson 9890

I don't know why when my partners print on this plotter, it makes some blank spaces and not is head cleaning because my partners do it and continue having trouble with it. If someone knows about it, please let me know. Oh, we are using Adobe CS6 Bundle. Thanks.

In conjunction with Jeff's suggestion, I suggest that you remove all of Epson's preferences for your preference folder especially if you are experience some other issues with other software. And especially if you have 10.6.1 installed.

Printing from Photoshop CS6

Having problems printing from photoshop cs6 the colors are way off. How do you collebrate the printer to print whats on screen?

you are going to have to try and match your printer colors to the image colors. many questions involving color management and your settings in PS: is CMYK set? set your "printer handles colors"?
for color management:
1. calibrate and profile your monitor
2. set up an image color space
3. configure your printer driver for the print.
reference this link:
http://www.graphics.com/modules.php?artid=736&name=Sections&op=viewarticle
http://www.computer-darkroom.com/ps10_print/ps10_print_1.htm
take a look at the links-
-janelle

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

Problem Printing onto CDs from Photoshop CS5 - Canon MG6150 printer

I cannot find a solution to this problem anywhere!! I have a Canon Pixma MG6150 printer and have designed a CD/DVD label using Photoshop CS5. The proportions are all correct, when printed on paper from within Photoshop I can cut out the label and it fits my printable media perfectly.
The problem is printing directly onto the CD or DVD using the printer's CD print tray. I cannot get the alignement correct -- the label will only print halfway off the media or more, so only a small section of my label appears on the CD. I have tried various settings from within Photoshop's print options and none work.
How can I get my label design to print onto the DVD or CD? Any help is HUGELY appreciated.
I am running Mac OSX 10.6.5.

I was testing other Imacs running the same photoshop CS5.1 with the new printer drivers from canon and it prints. They are running OSX10.6.8. My new computer is running 10.9.2 and it will not print from photoshop. Is the driver not compatible with the operating system? Is there something to try other than saying the driver is at fault. Do I complain to Canon to update their driver to work? What is a work around?
Thanks,

Canon Pixma Pro-100 printer ejects 3.8 in of a 4X6 paper and prints only 2.2 in of the image printing from Photoshop CS6, I'm sure I set everything correctly - what could I be missing?

Using Mac Pro running Snow Leopard (10.6.8) & editing & printing from Photoshop CS 6.
Have new Canon Pixma Pro-100 printer and set it up yesterday. First thing printed was a
document from MS Word (a letter) 8.5 X 11 plain paper - this came out OK. Next I fire up
Photoshop and open a 4 X 6 inch image to do a test print. I set it up in the print dialog as
4X6 paper, Canon's Pro Glossy paper profile, rear tray, standard print quality, Photoshop
manages the color. I load the paper in the rear tray close the covers and hit print. Now, when
it starts to print the printer moves about 3.8 inches of paper out of the printer and starts printing
on the remaining 2.2 inches then spits the paper out. It does this in Photoshop (any image it doesn't
matter), and it does it printing from Capture NX. I have been able to get it to print on the paper
correctly using Apple's Preview program but that that's not going to do me any good. I was on
the phone with Canon tech support for about 2 hours and they were completely puzzled suggesting
I would have to use Canon's printing apps instead to print - that doesn't do me any good either.
I want to be able to print from Photoshop. Any one every heard of this or experienced the same
problem? Thanks JamesD!

Hello again. I recognize that a print is good if you like it and bad if you don't, despite what others might say, but I will at least share my experiences. They might help you or others who are following this thread.
My monitor is calibrated with Spyder 3. Gamma 2.2, 6500K, 83 cd/m^2. Contrast at 50%; brightness about 52%. My monitor lets me choose blackness level - it defaults to 50%.
When I print the test image I linked to above, using Lightroom, with no adjustments, my technical output is as follows:
Middle step wedge shows twelve disticnt steps. Whitest step is color of unprinted paper.
It varies from paper to paper, but I can discerne at least the 252 step and on some papers 253 - telling me I have good highlight detail.
On the black side I discerne 8 or 10, nothing lower. (That sounds like what you are reporting).
Artistically I am very happy how my print looks - nice red strawberries, good flesh tones, etc.
One my monitor, the on-screen image is almost identical to the print. I am surprised that you can see the 2 wedge step on screen at a very similar brightness.
I also checked out this B&W test image:
http://www.northlight-images.co.uk/article_pages/bw_printing/bw-test-image-2.html
You are probably aware of this since you are printing with Print Studio Pro, but others may not be.
You can print a series of test images:
find the one that best suits your taste, enter the calibration values in PSP, and save them as a custom setting. Then, each time you want to print recall the setting.
You can do a similar thing in Lightroom using the printer driver and User Templates.
There would be some one-time trial and error to that approach.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop After restart error message appears: - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

PROBLEM: Cannot print from Photoshop
After restart error message appears:
— “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
• All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
The printer printed fine until about 2 weeks ago when this error message appeared. Printing continues from Pages, I-photo, preview etc. — only Photoshop fails.
The printer has been turned on and off, as have open documents been closed and open etc.. Preferences reset. Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
Attempting unsuccessfully to print to Epson 3880
What Adobe support will be of help.
Robert Darling — 2/19, 20, 21,22,23/2015

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Printing from photoShop text problems

why when i print from photoShop does my text get a ghosting effect only when on hp photo paper
when i select plain paper it prints fine
using hp 3520 all in one
and photoshop cs3
OS windows 7 64bit

Hello,
I see that you're having an issue printing from Photoshop. Now, are you having this same issue printing from another program on the same paper?
I just want to make sure you're having an issue with the printer and not just the program.
THX

Problems printing from iPhoto 6: Page setup & Preview

I am having trouble printing from iPhoto v6. For starters, the miniture preview frame in the print screen does not conform to the paper size selection or image orientation. (It is always a big square.) Only part of a 4x6 image image is seen in the frame. This makes predicting the final result impossible. To make matters harder, the print dialog does not remember what paper size was last used and many internal "Advanced" options reset the paper size to "letter". Simple choosing any printer preset resets the paper size. Switching from advanced options to the iPhoto options seems to alter other selected options as wlll.
I have the most current driver for my printer. I have no problem printing from Aperture or Photoshop. I have custom color profiles and am not entirely a novice, but I am wasting much paper and ink and spraying the inside of my printer!
The use of the native iPhoto print routines seems mutually exclusive with using Advanced options. I understood that the first iterations of iPhoto wanted us to depend on the Mac Print routines, and it was always a little touchy but I would have hoped earlier problems would have been sorted out by now. I want to print my own pictures!
Much confusion and no place to find good instructions. For example, should I be using "Full Page" or "Standard Prints" Standard settings in the print interface? There appear to be several places to select print sizes but they do not seem linked together nor is it obvious which one is determinitive. Under color options do I select Color Corrections <none> or <Colorsync> which then forces me to use driver recommended by Canon despite the fact I have a custom profile identified in Color sync utility. It just isn't working for me.
Are others notiing that iPhoto print routines are no longer working for them? I would like to see the internal print routines working intuitively before additional efforts are made to facilitate purchase from outside printing sources!
G5 2G Dual PowerMac 2yr old. Mac OS X (10.4.4) Canon i950 printer

goldn:
Welcome to the Apple Discussions. Just ran a test and I got a perfect card. Here's what I did.
1 - create the card and type Command-P.
2 - select Stylus Photo R200 under Printer
3 - click on the Advanced button
4 - in the bottom drop down menu select Paper Handling
5 - select the radio button "Use documents paper size: 7.00 in x 10.00 in
6 - now select Print Settings in the 3rd drop down menu
7 - select the type of paper you're using and the print quality you want. I used Photo and High Speed. (also used plain paper for my test)
9 - put a piece of 7 x 10 paper in the printer (yes, you'll have to trip the paper beforehand or use card stock designed for this)
10 - click on Print
11 - when the paper exits the printer quickly put it back in the printer
That will do it. Now there is a caveat. Putting it back into the printer before drying tended to get my leading edge nipped. If you use heaver card stock I don't think that will happen but just be aware. If you wait a moment to put the page, turned over, back into the printer to let the ink dry a bit, all you'll have to do is press the middle button which will be blinking red and that will feed the other side thru when you're ready.

Problems printing from Photoshop 4 to Canon Pro9000MarkII

Similar Messages

Maybe you are looking for