Problems printing small documents

Hi everyone,
I am a digital printer and I am running into an odd problem printing document that are smaller than 8.5 by 11. Typically I don't print from Acrobat. I usually just import directly into Command work station and then print from Fiery. However every so often I need to "print as image" to make sure the document prints as it should. I create a custom page size and make sure to choose the correct printer to format for. When I view it in my rip software the document reads as 8.5 by 11. So for example I can send business cards over at 2.25 by 3.75 and use the custom page size that matches but it still comes over as business card placed on a 8.5 by a 11 page. Does any one know how to remedy this? I am using Acrobat XI on a Mac running OS 10.9.3. I use Command Workstation 5.5 printing using Fiery rip software on a Xerox 700 digital press.

Yes, that shoild be fine.
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.

Similar Messages

Problems printing smaller sizes in Lightroom 1.4 Windows Vista-64bit, R800

Hi All,
I am having problems printing smaller sizes in Lightroom v1.4, WIndows Vista-64 bit, on an Epson R800 (driver version 6.5cAs, the latest one) . When I try to set the printer settings in both the page set up and the printer setup, it displays as 5X7, but somehow when it actually goes to print, the print dialogue box reverts back to 8.5 X11. I can print 5X7 in CS3 with no problems on the same machine. The prints coming from light room look ok, they are just the wrong size for the page. Some how it appears that lightroom is not able to change the printing size defaults from 8.5X11. The prints in lightroom are fine as long as I use 8.5X11 or print in CS3. Any help to fix this would be great.

make sure your ventilation ducts are clean from dirt, Vista put lot more strain on every component of your laptop, so the temperature increase should be normal. Xp is lot less demanding on computer compoents, however it does sound like your heat ventilation fan and fins are clogged with dusts. So open up the laptop to clean away any dusts that maybe there.

Problem printing Report Document Draft

Dear support,
our customer has problem printing its Document Draft Report, because
the "DRAFT DOCUMENT" string on the background of the page is too large.
The printer can manage this dimension and prints an empty second page
(also when the document has more pages).
See attached file.
If we disable the "Print Draft Watermark on Draft Document" flag in the
Print Preferences, the customer hasn't the problem printing the draft
document.
The customer need to distinguish the print of draft document.
Is it possible in the report designer to know if a document is a Draft or
a Definitive one?
If we can understand the type of the document, we could add a text box
"DRAFT DOCUMENT" in the report and disable the "Print Draft Watermark on
Draft Document" flag.
Can someone help us, please?
Regards,
Emanuele
TC Systems SA - Mendrisio - CH
Emanuele Croci
+41 (0)91 960 2525

hi Emanuele Croci,
For example paper format which default as Letter,but in PLD
if y'r paper format is A4 then definitely it will be printed more than 1 page.
Go to File --> Page Set Up --> Change paper format as in PLD.
Also reduce the font by 1 point.
If problem not get solved,You can print Water mark as DRAFT from printer properties.
Start --> Printer and Faxes > Select Printer you want to print,Right Click it>Select Properties>Select Printing Preferences>Select Effects Tab> Select Water mark option as Draft>Click Apply.
Test print it let me know.
Hope above solution will solve problem.
Jeyakanthan

Problems printing word documents

Hello
My friend as a powerbook and a HP printer, and is having problems printing word documents, nothing shows up in preview when you press print just a blank page pops out. You can print pictures fine from iPhoto, any ideas?
Popping over tomorrow to see if I can get it working. My friend emailed a document and I had no trouble printing it.
Paul.

Hello MaradaMMA,
Welcome to the forum.
Can't test at the moment, but, if after clicking the print
button, in the option tab, can you select "as laid out on screen",
then click Print?
Hope this works, if not, please post back
Regards,
Brian

Problem - printing billing document

Hi experts,
when printing billing document,some billing document is printing and some one is not printing based on condition type for billing document.
one billing document have one or many condtion types.
based on condtion type the billing document is printing.
i saw inside the program i found one function 'RV_PRICE_PRINT_ITEM'.
COULD YOU PLEASE explain functonality of above F.M
this is very urgent.
Thanks in advance for right solution.
Regards
jai

Hi,
Already i maintained the condtion type in customzing.some records picking right one some one is not picking right one. see my problem.
for MWST contion type, the document to be printed.
good document: have condtion types XXXX,MWST,YYYY.
wrong document: have condtion types xxxx,YYYY,MWST.
The f.m selecting MWST for right document and YYYY selected for wrong document.
what is extracltly functonality of RV_PRICE_PRINT_ITEM f.M
WAITING FOR REPLY.
Regards
jai

Problems printing PDF documents

I have problems printing any PDF documents. I use and HP LaserJet M1005 MFP and a SAMSUNG CLP-300; I'm able to print any documents but I can't print PDF with neither of the printers. I also have problems with the scanner of the HP LaserJet M1005 MFP; I cant scan docuemnts; don't have the option.

Hi vhcarmona, have you tried printing a PDF from Preview? And what error messages, if any are you getting from Adobe Acrobat Reader? Have you updated all printer drivers? Also is this a resent problem? Like after an update or upgrade.
JG

Problem printing pdf documents created by ps2pdf

When I try to print pdf documents that have been created from ps documents by ps2pdf, the output is corrupted. Many letters are missing but included graphics are printed just fine. This happens with my HP printer and with cups-pdf, when I print the pdf document to a new pdf document. There are no errors in the logs, so I don't know what is goning wrong. On a windows PC, the pdf documents are printed correct too. Other pdf documents, created by pdflatex are printed correct.
If I don't use ps2pdf and print the ps document directly, the output is correct. I have tried different pdf-viewers without any difference. About half a year ago, everything was working fine, so could it be related to : "As of version cups 1.5.3-3 ArchLinux makes use of the new full pdf-based printing workflow."?

Flo,
In my limited experience with the iOS iWork apps, they weren't designed for those who are picky about the layout. They are highly automatic and if you don't like the result, it's not easy to override. If the format when printed leaves unpleasant margins, I think your best approach is to reshape the tables in such a way that they will better fit the target media. If you are having large top margin, make the tables narrower, then when they scale to fit the paper, then may fill it better.
Jerry

Problem printing Landscape documents

Hi I have an unusual printing problem.
I just received a new Windows 7 machine and am running Acrobat 9.4.1 on it.
I receive a lot of documents in landscape mode (i.e. presentation slides), which I have always diligently printed out by hitting the print button, changing my orientation to Portrait on the Page Setup tab, then going to the Finishing tab to select Two-sided Printing, Short-edge binding, and finally Staple + Collate with staple in the upper left-hand corner.
Until getting this new machine I never had any issues with having this print out just fine.
However, when I do this now I get a printout that has the first page of the presentation flipped into Portrait mode, with the rest of the document printing exactly the way I want it. Even more interesting is that if I hit the print button again - not having to change any settings since they were already in there from the previous print job - then it prints out perfectly fine.
I've tried this on different printers and am getting the same problem so it's not a print driver issue.

Just to add one interesting tidbit: So after printing the first presentation in Landscape - which always comes out wrong as described above - I go ahead and print out that one again and some others which all turn out fine. However, if I then go to print a regular report in Portrait and change the print settings accordingly, lo-and-behold the first page is flipped in Landscape mode with the rest of the document in Portrait as I want it.
So it seems to be the act of changing the orientation of the document that causes the first one printed to come out bad.

Problem - Prints smaller than 100%

I've got a 110 page book and I'm about to do a final print before making a pdf to send to printer. When I print, the print size comes out as if it's set for 90 or 80%. I've got Page Set up as 100% and portrait - the margins are OK.
The front matter is in a separate document and prints fine and I can't find what's the difference in any settings between the documents. I'm in a time crunch
Pam

HALLELULIA!!! I've never used 'comments' and didn't know it create this problem. Wow - problem solved. I'm sure I'm not the first to ask this, but couldn't find it in the last month's inquiries - many thanks, Dennis. Pam

Problems printing Acrobat documents on shared printer

I have a MacBook Pro and a Mac Pro. I also have an Epson 1400 printer.
When I print any Acrobat document using the printer hooked up directly to my MacBook, it prints perfectly.
When I print the same Acrobat document using the printer hooked up directly to the Mac Pro, it prints perfectly.
However, when I hook the printer to the Mac Pro and enable printer sharing, and then print the same document from the MacBook Pro using the shared printer via the network, the Acrobat document is reduced in size by around 50%. I have checked every possible setting and just can't find why this is happening.
Thanks in advance for any help!

The problem occurs not only through Acrobat. The prints have the correct size through the Mac only when the printer is directly connected via USB on the Macs but reduced size through the network. The problem occurs in any printer model on the network.
I do not know how to solve this problem but curiously does not occur with Windows computers with Bonjour that prints to the printers connected to Macs.
When Apple will fix this?

Print smaller document center justified

Hi,
I've to print a small InCopy CS4 document (14 x 21 cm) on a larger format printer (21 x 29 cm).
The goal is to get the print center justified. As there is no option for that, I wonder if there is a scripting (javascript) solution available?
Regards
Ingo

I don't have InCopy at hand so can't test it. Try this:
app.activeDocument.printPreferences.pagePosition = PagePositions.CENTERED;
You can also center it horizontally or vertically:
PagePositions.CENTER_HORIZONTALLY
PagePositions.CENTER_VERTICALLY
Kas

Problem printing A3 document

When I print an A3 document it leaves a gap at the top, this doesn't happen with A4. I've checked that the header and footer is unticked, appreciate any help thanks

Hi.
Try this:
- close all documents
- choose File > Print presets > Define and choose "Default"
- Format > Choose "Paper Format" and set it to "Custom" (You may also set up other options you may find useful)
- that's it...
I don't guarantee result, but you may give it a try.

Problem printing some documents

Hello
A friend of mine has a power book and a HP printer. Some Word Documents don't print. Only a blank page come out of the printer no error message. Nothing shows up in the print preview. My friend emailed me the same document, and I had no trouble in printing it. Pictures from i Photo print fine as do other documents.
Any ideas?

I suggest your friend post his question on the Office:Mac discussion boards:
http://www.microsoft.com/mac/community/community.aspx?pid=newsgroups

Can't print small documents

I have three printers a Color LazerJet CM2320 MFP Series PCL6, a DeskJet 9800 and a OfficeJet 7400. I am trying to print RSVP cards for my daughter's wedding and they are getting stuck in all three printers. The cards are 3.1/2 X 4.7/8 inches. Is there anything I can do with these printers or is there another printer that I could purchase than will print light cardstock that size?

The Deskjet 9800 should handle those through the front manual feed slot.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Hp laserjet pro 200 color MFP M276n not printing PDF documents

Hello
I am having problems printing PDF documents from our hp laserjet pro 200 color MFP M276n.
I get a blank sheet of paper and a message on the printer saying 49 service error - turn off then on
I can print word/excel documents.
Many thanks
Karen

Hi,
As I understand you get a 49 error while printing PDF document from hp laserjet pro 200 color MFP M276n.
Kindly follow these steps to resolve the issue.
1. Open the PDF document you want to print.
2. Click File > print > Click on the Advanced option > select the print as image option.
though I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution

Problems printing small documents

Similar Messages

Maybe you are looking for