Problems printing smaller sizes in Lightroom 1.4 Windows Vista-64bit, R800

Hi All,
I am having problems printing smaller sizes in Lightroom v1.4, WIndows Vista-64 bit, on an Epson R800 (driver version 6.5cAs, the latest one) . When I try to set the printer settings in both the page set up and the printer setup, it displays as 5X7, but somehow when it actually goes to print, the print dialogue box reverts back to 8.5 X11. I can print 5X7 in CS3 with no problems on the same machine. The prints coming from light room look ok, they are just the wrong size for the page. Some how it appears that lightroom is not able to change the printing size defaults from 8.5X11. The prints in lightroom are fine as long as I use 8.5X11 or print in CS3. Any help to fix this would be great.

make sure your ventilation ducts are clean from dirt, Vista put lot more strain on every component of your laptop, so the temperature increase should be normal. Xp is lot less demanding on computer compoents, however it does sound like your heat ventilation fan and fins are clogged with dusts. So open up the laptop to clean away any dusts that maybe there.

Similar Messages

  • Problems (bugs) with Project Explorer LV8.5.1 Windows Vista 64bit

    Helo all,
    I am using Windows Vista 64bit with all updates and service packs on an ASUS G1 dual core 4gig memory.  After writing code for a while I find that I cannot execute my top level vi from the project explorer.  I can run the vi from outside the project no problem.  If I try to create a new project and load the vi into it the LV hangs and the windows task manager cannot kill either the vi or the new project explorer, I have to reboot the computer to recover.  I have attached the vi.
    regards,
    Karl
    Attachments:
    FS Test Main V0.9.vi ‏164 KB

    Hi Karl,
    I am having a look at this issue--I shall try to reproduce it and get back to you with my results.
    Ipshita C.
    National Instruments
    Applications Engineer

  • When printing from the ipad, it only prints small size...not a regular sheet size.  Any suggestions?

    When printing from the ipad, it will only print small size.  I want it to print full sheet.  Any suggestions?

    If you are using HP, try this app:
    https://itunes.apple.com/sg/app/hp-printer-control/id469284907?mt=8
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201A/9d3a6ecace9ccd2a24 de11e7fe565943_zps51bc1998.jpg

  • How can I install lightroom 5 into windows vista?

    I can download it with Adobe Application manager, but when I am doing an installation, it says me that there is error!!!
    Help me please, how i can istall lightroom into my laptop, i have windows vista business (service pack 2).
    Thank you very much!

    http://helpx.adobe.com/lightroom/kb/windows-vista-supported-lightroom-5.html
    "Windows Vista is not an officially supported operating system for the release version of Lightroom 5, and it doesn't run on Windows Vista."
    Lightroom 5 requires Windows 7 or Windows 8.
    http://www.adobe.com/products/photoshop-lightroom/tech-specs.html
    Unofficial workarounds exist online to get Lightroom 5 running on Vista but try them at your own risk. There will be no support if anything goes wrong.
    http://forums.adobe.com/message/5977691#5977691

  • Problem launching flash cs5 and cs5.5 on windows vista

    Hello Every Body. I have a problem launching flash cs5 and cs5.5 on windows vista home premium edition. When i launch it, the register screen appears(the one that tells the trial time left) but the flash main window always stays black (or white)and is not responding. I had it working about one week ago and i can't figure out what is the problem .It tried reinstalling couple of times without succes. I also tried deleting the left flash cs5 program files after uninstall but it didn't work . I would need your advice. Here is the screen as it appears:
    BEFORE I CLICK IT IT IS BLACK9(notice that in the up bar it sais not responding)
    Thanks
    -jeremyskateboard

    here is the black screen i get

  • Problems printing small documents

    Hi everyone,
    I am a digital printer and I am running into an odd problem printing document that are smaller than 8.5 by 11. Typically I don't print from Acrobat. I usually just import directly into Command work station and then print from Fiery. However every so often I need to "print as image" to make sure the document prints as it should. I create a custom page size and make sure to choose the correct printer to format for. When I view it in my rip software the document reads as 8.5 by 11. So for example I can send business cards over at 2.25 by 3.75 and use the custom page size that matches but it still comes over as business card placed on a 8.5 by a 11 page. Does any one know how to remedy this? I am using Acrobat XI on a Mac running OS 10.9.3. I use Command Workstation 5.5 printing using Fiery rip software on a Xerox 700 digital press.

    Yes, that shoild be fine.
    At this point I think you should get Applejack...
    http://www.versiontracker.com/dyn/moreinfo/macosx/19596
    After installing, reboot holding down CMD+s, then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 5 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 5 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
    Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.

  • [MAX] Problems setting the size of my PCI user window

    Ok, this may be a very dumb question but I'm just starting to use MAX so please bear with me.
    On my VXI system I need to change the size of the PCI user window from it's default 64KB to 16 MB. Therefore, under MAC I went to the PCI setting tab and tried to change it to the desired size. Everytime I try to change it it shows the following message:
    "Unable to save configuration changes.
    Unable to access configuration information
    [-405]"
    I guess this means that the configuration file that stores this value in either corrupted, missing, etc. Or that I cannot change that window size in my current system. Does anybody have an idea on how to solve this little problem? thank you.

    Hello!
    I have a few questions about your configuration. What Operating System are you using? If it is Windows NT/2000, are you logged into an administrator account? If not, do you still get that error when logged in to an administrator account? Also, what VXI controller and version of NI-VXI are you using?

  • I cannot print custom sized borderless cards with the Windows Vista system.

    I use an HP Photosmart 8450 printer on a Windows Vista 64-bit system.
    The printer will not recognize custom size paper for borderless printing. I print borderless photos on greeting cards. It worked without a problem on the Windows XP system. I have tried everything! Help.

    Thank you, edmeister. This article helped me solve the problem - the correct paper size was not selected.
    I appreciate the quick response.

  • Lightroom 4 and windows Vista

    I need help getting Lightroom 4 to run on my system running Windows Vista.

    And what specifically is the problem?
    Mylenium

  • My hp deskjet 1510 series does not print when connected to my hplap top (windows Vista),

    My hp deskjet 1510 series does not print when connected to my hp lap top (windows Vista), it says the printer is not active, although it is default printer, connected and on. However, it does work when connected to the (also HP) lap top (windows 8) of my husband.  I did everything the hp print and scan doctor advised and also what I could find at HP support (like switch of fire walls, reinstall everything, check printpooler ec etc)... it still does nothing except that I managed to print a diagnostic print which should give information about the condition,  but it only gives numbers and letters like : 11. SN = [Edited for Personal Information] Yr  12 PER = 05YR etc, that does not really help me :-). It won't print any testpages.  H E L P!!!

    Hello Elisabeeth,
    Welcome to the HP Forums!
    I understand you're unable to print using the Deskjet 1510. I will do my best to assist you! When you reinstall the HP software, did the installation state it was complete?
    I would start off by following this HP document on 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print. From this document, please make sure you check the connection type and the ports.
    Please post your results, as I will be looking forward to hearing from you.
    I worked on behalf of HP.

  • I am unable to print (any website) from the latest Firefox, but print fine from Internet Explorer. Using Windows Vista on a desktop machine.

    printer advances page and spits it out with either nothing or a single garbled line printed on it instead of a whole web page. This is independent of which web site and even happens with web sites that have a specific PRINT or PRINTER FRIENDLY VERSION button. Printing is fine from Internet Explorer. Unsure about Chrome. Printing from Firefox worked fine until I downloaded newest version. Operating system is Windows Vista on a 64 bit desktop computer.

    Try the '''reset''' described here: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

  • Problem after updating to iTunes 10.5 on Windows Vista.. I can no longer access the iTunes store..

    Hi
    After updating to iTunes 10.5 on Windows Vista I have found that I can no longer access the iTunes store... I am left with a blank iTunes screen with the loading bar stuck at halfway..
    All other features seem to work... only opening  the iTunes store is failing..
    I have ran the diagnostics feature and this says everything is ok, so I'm a bit stuck
    Please help

    Purple-Gecko...all that I can say is, "Boom!!!"  You are THE man/woman, whichever the case may be.
    The "netsh winsock reset" command worked like a charm for my machine (running Windows XP SP3).  I have had two weeks of frustration with this issue and finally found your post which got me back online with the iTunes store.  My problem accessing the iTunes store began once I downloaded and installed iTunes 10.5 in preparation to upgrade to OS5.  Once 10.5 was installed, I could open iTunes and access everything except the store (which prevented any of my devices from being able to sync). I followed all of the suggestions that I could find in Apple Support and the suggestions that I was emailed from Apple's support techs.  I unistalled all Apple software and reinstalled iTunes multiple times, and still could not access the store. 
    Your suggestion is the only "cure" that I have found.
    I thank you, my iPod thanks you, and my iPhone 4 thanks you for taking the time to post this fix.

  • The same problem with Windows Vista 64bit-iTouch not recognized by iTunes

    Happy Holidays, all. I was just hoping that someone had come up with a fix to the problem with iTouch and Windows Vista Premium (64bit). All I get is a picture of the plug pointing to the iTunes image on my iTouch, can't even see the regular icons yet. The device is not picked up by iTunes, either. Tried reinstalling iTunes, the whole bit. Thought I'd try one more time to get a fix before returning the product. By the way, if you ever finally do get through to Apple Tech Support, they'll act like they have never heard of the problem (at least the guy I spoke with did. He wasn't very nice or very helpful). Anyway, good luck and thanks.

    I have I think the same issue. iTunes can see a Nano but not an iTouch. Vista see the device when I plug it in, but no luch with iTunes. I ended up using a old laptop with XP which is slow and out of hard drive space, so I need a fix.

  • Is Lightroom compatible with Windows Vista?

    Adobe Photoshop Lightroom 1.0 will install and run on Windows Vista; however, Adobe cannot guarantee the quality of the software experience until Adobe fully certifies Photoshop Lightroom for use on Windows Vista...
    See
    Troubleshooting System Errors in Photoshop Lightroom 1.0 for more details on possible issues and solutions
    Other information relating to Vista compatibility can be found in the linked
    PDF

    No.
    Lightroom 5 requires Windows 7 or Windows 8
    http://www.adobe.com/products/photoshop-lightroom/tech-specs.html
    It will not run on Vista.

  • Problems with VPN-Client 5.0 instoled on Windows Vista over ADSL Conecction

    Hi, I have severals clients that they use Windows Vista and connects throw there lan over a VPN-Client. The clients that has an ADSL connection in there hose has disconect problems. Do you know why?? Do you know same workarround to do?? Thanks.
    Regards.

    Make sure that you have the right cable pinout and that your ISP has turned on the DSL service. Troubleshoot the DSL connection by watching the modem state of the ADSL interface as the line retrains.
    To use the VPN Client, you need
    - Direct network connection (cable or DSL modem and network adapter/interface card), or
    - Internal or external modem
    For further more troubleshoot click this link,
    http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client500_501/release/notes/51client.html#wp1550392

Maybe you are looking for