Problems printing to tape - Express HD

Hi
I am having problems exporting a movie to tape with Express – not on all projects just occasionally (and for no apparent reason I can see) and I’m finding it really puzzling.
I’ve checked easy set up option and its set to Firewire Pal Basic (I’m in the UK), refreshed video. Made sure the playback is set to high quality – and when I go through the print to tape routine the camera (canon 700i) appears to respond by moving from pause to record – but all I get is a black screen on the camera whilst the exporting movie appears on the Mac monitor.
Anybody got any clues – is there something I’m missing?
Many thanks for your help
John

I Print to Video using the "easy setup" : Apple Basic Firewire.
I import using "Apple - DV Converter". Seems strange that I have to switch setups depending on Inforamtion direction. {the two setups are adjacent in the easy setup menu, NTSC}.
Works both with tape and with a DVD recorder.
Discovered this by trial and err. Hope you spent less time than I did.
-wbajr tbc
My converter is an old ADVC 100 circa '03.
I was wondering if the ADVC 110 experiences the same "feature" or if there are any converters that don't need this "swap". Will ask as a separate post.
eMac DVD Mac OS X (10.4.5)

Similar Messages

Having problems using ion tape express with itunes cannot find the song on hard drive

Having problems using ION tape express with itunes. The song is on hard drive as temp1 not the name of the song. And I have problems playing it in itunes
because it says it cannot locate the song'

Then correct the name of the song or point iTunes to the new file.
Issues with restoring should be directed to the manufacturer of the backup software/device... this is not an Apple or iTunes issue.

URGENT! Problem printing to tape

I have a Sony HDV-A1U video camera. I edited a video in FCP and I want to print the footage back to a tape. My camera is not being recognized by the computer. All my camera shows is a blue screen. My sequence is setup for HDV and my easy setup is configured for HDV. Any ideas?

You'll know some of this already but it's a good workaround for curing your camera recognition problem with FCP (if that's what it is):
First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
http://docs.info.apple.com/article.html?artnum=301852
Follow the instructions carefully and you should have things running in no time - it's quite safe but you must Trash the Receipts AND re-install QT from the link provided.
Don't use iMovie for capturing (or printing to tape) - it doesn't give you a timecode and that's very important.
If none of the above works, then I suggest you trash our preferences. FCP gets it’s knickers in a twist from time to time and if you trash your preferences it will often sort things out (with no harm done to your project etc etc) . . .
Download FCP Rescue :
http://fcprescue.andersholck.com/
Once it’s downloaded, hit Backup first, then hit Trash. If the Trash does no good, hit Restore and everything's as it was. (Easy-Peasy)
FCP Rescue is freeware but there’s provision to make a donation if you wish – (it’s well worth it)
If you need reassurance about trashing your prefs, go to this Apple page:
http://docs.info.apple.com/article.html?artnum=302337
Or this Ken Stone page:
http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
Let us know how you get on!
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Problem printing to tape...

I searched for this particular problem and I couldn't find anything...
So after a late night session of nearly having a heart attack, I managed to find a full quality QT version of my project...It plays anamorphic and exports for DVD pro just fine...But when I go to print to tape, it cuts off the left side of the screen...I checked the monitor and it plays like that in both my monitor AND my camera...Any suggestions?

Really? THANKS!

2 Problems Printing to Tape

1. I am using Print to Tape to put my sequence on MiniDV and for some reason when I record it, nothing is showing up on the tape. I know that the Device is connected to FCP because it starts recording automatically through Print to Tape. I am using an old Sony Handycam DCR-TRV38
2. In Print to Tape when the sequence is playing I get a dropped frame error. I have gone through the list in the FCP manual to troubleshoot and it helped in that the sequence played through about 15 minutes before the error appeared. Any other things I can do to get this to play through... I have got to get it onto MiniDV TODAY!!!

How full is your Capture Scratch drive?
It also helps to have a drive that's in good shape. If you have Disk Warrior, use it on the drive to clean things up.
Try doing an Audio Mixdown before printing to tape. (select the entire timeline then SEQUENCE >RENDER ONLY > MIXDOWN)
If the footage for the sequence you are trying to print is on more than one drive, make sure that your drives are not going to sleep. Check your energy saver preferences. There is also an application that can help with this, I believe it's called Drive Spindown. (A search here will probably find a link to it)
Finally, a good workaround for your problem might be to export your sequence to a self contained QT movie (use current settings) then import that file to a new sequence and print that to tape. That way FCP is only dealing with one file.
rh

Problems printing to tape

Hey I am trying to print one of my videos to tape. However I can't seem to get it to work. I don't know if I have the right settings or not.
Its HD most of it was done on a 7D and 5D but some footage is with a Canon XL H1a. I don't have a video deck but I am using my Canon Xl H1a as the deck. However I usually get an error thing that pops up saying my settings are wrong and what not and sometimes it plays but the tape doesn't record.
What am I suppose to do. How do I get this to record and print to tape? I need help any information is helpful.

I don't believe you can print HDV 1080p24 back to tape. I believe it has to be 1080i60. or 24p in a 60i stream. If your timebase is 23.98...can't do it.
But what do I know? I output to different formats. I just seem to recall someone else having this issue.
Shane

Problems printing on Airport Express to Lexmark 510

I can print from my Powerbook Titanium G4 running 10.4.3 wirelessly without any problem.
I can't print from my Powerbook Bronze G3 runnign 10.2.8.
I have tried updating the firmware for the Airport express. I have updated the drivers for the Lexmark.
It works when connected by the USB directly. I can see the printer in Print Center. I can connect to the internet with this computer, but can't print. I tried to configure through the Airport Admin utility, but that doesn't seem to allow me to connect using this system so I cant make any changes. I have viewed the apple "Printer troubleshooting for Apple Airport Extreme...." and other than the problem with changing the configuration, I have done everything else.
Can anyone help? Thanks.

Defective airport

Problems printing via AirPort Express in Windows

Hi,
I have recently bought an Airport Express base station. I have configured it correctly, with PPPoE, AirTunes and Printer sharing.
I have a mac and a pc connected to Airport Express, and with my mac, the base station works without any problems. My pc (running Windows XP SP2) connects to the internet, but it cannot use the printer feature.
I have installed Bonjour for Windows 3, and when I boot the computer, it recognizes the printer (HP LaserJet 1320) immediately. But after a couple of minutes, it disappears, and the pc can no longer connect directly to the base station nor use the connected Bonjour-printer. Despite this, it is still connected to the internet.
Does anyone have a solution to my problem?
MacBook Pro 15,4" Mac OS X (10.4.8) 1GB / 80GB

Does anyone have a solution to my
problem?
Try using this process instead.
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://www.ifelix.co.uk/tech/1004.html
Though I agree with RJ it probably is more a firewall or internet security software issue.
iFelix

Firewire failure when printing to tape with DSR-11

I have a problem printing to tape with bigger projects. I can't put out to tape more then around 20mins, then the either sound or sound and picture drop.
I have everything rendered and exported to a new, not-selfstanding final cut pro file (Quicktime export) and reimported and put in a new sequence. As I found out, this causes the least problems with complex sequences, sounds etc.
The problem might be related to a occasional image drop out while working on the timeline and watching on the external monitor (through firwire). After a while the connection fails and I have to switch from "all frames" to "none" and back in order to continue watching through the deck.
I checked all settings I know, could it be a hardware problem or a problem with the protocoll of the sony DSR-11 deck (I use DVCAM).
Thanks for your time !
klaus

Hello Klaus,
I also own and operate a Sony DSR-11 which has worked out just fine for me. However, I recently bought a new firewire cable to replace my 4-year old cable and discovered that you get what you pay for when it comes to cables. After a while the new cable would slip out of the back of the DSR-11 and I would lose my connection during editing and playback. As part of the troubleshooting process I replaced the firewire cable with a "better" one and no longer experience this problem. My only critisism of the DSR-11 is the smaller firewire connection instead of the larger one found on external firewire devices. Good luck.
Steve

Problems with capturing and printing-to-tape using FCP4

Having trouble logging footage and printing to video using FCP4.
1) When we log-in footage (capture) it constantly stops and says, "dropped frames". This usually happens after 10-15 minutes of logging-in footage. Why is this happening??
2) When we Print-To-Tape, it will suddenly stop! Sometimes it will continue Printing-To-Tape, but without audio!
Is this a common problem? Should we re-install FCP4?
We've done all the software updates, but we're still experiencing these problems. We've also cleared up our computer by deleting old FCP4 projects.
We have a G4 with three internal Hard Drives with approx 180GB each. We're using the Sony DSR-11 as our Mini-DV deck.
Help!!!!

We don't have Virex or Norton software in the machine. We have Disk Warrior which was helpful in the past with other problems. Should I run another check using Disk Warrior?
We only have one machine which has three internal drives. We've experienced the same problems using each of the drives.
We do have some video stored in the system drive, but normally we don't use that drive. The system drive currently has 70GB availble, as do each of the other internal drives.
We have updated our FCP to 4.5, but should we trying re-installing it?

HDV Print-to-Tape problems

About a half hour into a "print to tape" from an HDV sequence to a Sony M25U HDV tape deck, I get an error message that has something to do about a specified file being locked [first issue]. Since I could not determine which file it was having a problem with I decided to render a complete self contained Quicktime and then output that.
When I try to print that to tape it skips [second problem] and it appears to do that with any rendered quicktime. I would think that FCP should have no problems with files that it rendered. This happens with multiple tape decks and FCP workstations.
Anyone else experiencing this? Any suggestions on how to resolve this?
Thanks

Cody,
I have a Z7 which should operate pretty much like the FX1. I did this about a month ago and remember struggling with it. Here are my notes, which may or may not help. It is only vague in my mind at the moment, sorry.
1. I am pretty sure when editing I had Render Control set to ProRes, as you do. When I did print to video, I copied my whole sequence, then put it into a new HDV sequence where the render was set to HDV. This took a long time--2:1 on my MacPro Dual 3GHz. I also have starred here--"When copy to HDV sequence, check titles/etc to make sure aspect ration still OK."
2. I have this part starred--"EACH TIME print to HDV tape on Z7U, go into Easy Set-up and choose HDV 1080i60. Defaults to custom which won't work."
3. Here are some more notes I took, which aren't particularly clear to me at the moment
PTV with the "Different settings" box checked and have this be HDV (1440x1080i60). That may have had to do with the fact I was using the MXO and monitoring with a second monitor. May not apply to you. I also see the note "Playback HAD been set to none".
4. Also this last note:
"Camera AV set to HDV, not 'auto' for this. Usually have on auto. Also FW out HDV-->DV is still ON, which is what need for timecode through AJA. Still seems to record into camera as HDV. Instruction book says to turn this 'off' when record HDV to tape, but seems to work either way."
Hope one of these notes helps you. If I had to pick one to try first, it would be #2. I had it starred the most
Sharon

Timecode problems when Printing to tape HDV sequence

I have a project fully edited in HDV format and I want to make a master on tape to archive. I have done this before with no problems but now I have an odd issue. After FCP has printed to tape and I review the footage on the deck (camera is the recording device). The picture is on tape and looks fine but the timecode is not function properly. Instead of running continuously it freezes and then will skip forward some. Again the picture is there and looks fine. I have switched out the decks and the tapes and tried it 5 times but with the same results. What makes this more odd is the first hour of footage runs properly and then after that the problem starts.
I played back other projects like this that I did the same way and the timecode runs correctly. This is a very odd issue and hoping someone else has seen this before and can help. Thanks!

Try exporting the sequence as a self contained movie, then try recording that. My guts say the HDV you're working with is just not allowing your CPU to keep up with it all, and TC might be where this is showing up. But a single file playing back would make things easier on your system all round, and it's lossless. File/Export/QT movie... then check on make self contained, and leave off recompress all frames. This is lossless quality wise.
Sure it's not just dirty heads or something on your recording devices? LIkely not, but it's a shot in the dark from here.
Jerry

I also have print to tape problems

When I try to print footage to tape, It only captures the audio.
I"m capturing onto my Sony HDR cam, on the DV setting.
I did suspect it might be that final cut pro is set for NSCT, and the camera is set for PAL ( want to print to PAL)
So I did change all the settings on Final cut to PAL, but still nothing.
I know I'm missing something, but I can't put my finger on it
Mac Pro

Hi Shane
I have upgraded my old system to the newest (new Mac Pro + lastest fcp)
As the fcp programe came from the USA, and I'm in Ireland, all the default settings was on NSTC.
So I went and changed them all to PAL.
Then when I tried to print to tape, and the problem occurred, I went back to the settings, and found that I Left 1 setting on NSTC. I then chaned it - that's why I thought it may be the source of my headache.
The footage was filmed in PAL, and I checked, captured in PAL aswell.
Even when I do a playback, with my camera (Sony HDR-FX1E) connected via firewire, it will only show the first frame of the sequence, and every frame I stop on..... audio plays 100% fine.
Mac Pro

Print to Tape problems

Keep getting the prompt "Check HDV/DV Input" when attempting to Print to Tape. My AV Devices are set to HDV(1440x1080)30p. I'm using the Canon XLH1 as a deck. Have changed firewires and rebooted. The item property of the sequence I'm trying to print is HDV 1080p30. The camera is on Mode Set HD and Frame Rate at F1, which is 30F.

I get the desktop image when I play and record to the deck.<<</div>
What are you playing? If you simply play the timeline in FCP you should get what's in your timeline recorded to your deck, not the desktop.
Any way, glad the other option worked.
rh

Print to tape problems-Get the audio but no video

I'm going from a QT file I brought into FCS and rendered, et al to tape. I'm able to get the audio track output but no video!
The QT original of my film was 720x486 NTSC 4:3 H.264 and is a .mov file format. Bringing this into FCS, FCS asks whether I want to automatically convert the thing to fit the specs offered in tape output - which, when I actually look in the dropdown for output settings, don't have a 720x486 but does have the usual 720 x 480. FCS chooses the 720 x 480. Ok, so fine. It converts the clip to 720 x 480 and playing back the rendered clip t 720 x 480 looks fine and saves to a QT file fine but when trying to get onto DV tape, the video won't print. I do know it's possible to get a print to tape of my film since a week or so ago, someone made a digibeta output of my film for me using FCS and it came out just fine (I didn't pay attention to what they were doing exactly and perhaps they did some magic that someone else here might be able to fill me in on...).
Anyway, I'm stuck - canNOT get the video track to output to tape. Any clues appreciated. I've been through the output setting module a million times, tried creating a new QT file original to work from, and have confirmed that the recorder works fine because other QT files we created worked fine - though they were 720x480. But shouldn't the conversion FCS does from 720x486 to 720x480 suffice????
Help!

H.264 isn't supported as an editing format in FCP... convert the files to a supported format. If it seems to be OK in playback in the Canvas, I'd suggest you export it as a QuickTime Conversion movie and choose DV as the format... reimport that and print to a DV deck/camera.
H.264 is a delivery format, not an editing format... resizing it probably hurt the picture too BTW... If it's really critical, then you should do the above to the source clips and re-edit, but choose ProRes as the codec, and keep it 720X486... no resize that way. Re edit in a ProRes sequence matching the frame rate and size. FCP will set it up for you when you drag to it just as it did before, but it will not resize in that case.
Jerry

Problems printing to tape - Express HD

Similar Messages

Maybe you are looking for