Problems printing using iPhoto and Epson Stylus Photo R2400

I'm using OS 10.5.6 and iPhoto 8.0.2(402) to print pictures on my Epson Stylus Photo R2400.
I have other printers set up on this computer and they all print everything just fine regardless of the program I am using.
Using the Epson Stylus, I'm able to print from any other program than iPhoto.
When I try to print pictures from iPhoto, I get the error message...
can't open ` /private/var/spool/cups/tmp/4a18c65407c9b (the numbers at the end changes each time I try to print.
When I go in to check the folders out to see what might be causing the problem, the permissions on the folder cups and tmp have the following rights set up. system = Read & Write, _lp = No Access, everyone = No Access.
I've been able to set the everyone setting to equal Read & Write access, but I can't get the _lp access to change. When I reboot the computer, the everyone setting goes back to No Access.
Any ideas for how I can get this to work?
Thanks,
Bill

Welcome to the Apple Discussions. I don't have a tried and true fix for that but I would start with dumping the printer driver via the System/Print pane and then reinstall it. Go to the Epson site to download the latest driver for that particular model in case there's a newer one released.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

Similar Messages

Problem to print with iPhoto and epson stylus photo RX620

I asked a question about the print with Iphoto. Larry gave some explainations but it still doesn't work. I can change the reglages with Safari, with Mail but not with Iphoto. So when I try to print photos, the reglage is standard and the result is bad. I would like to change the reglage, if i use glassy photo paper. With my PC, I have no problem to print with window or picassa. Thanks for your answer.

First I have no idea in the world what "reglage" is
But what ever printer specific options are available are supplied by the manafacturer's print driver and these are available on the last print window
LN

How do i print from iPhoto with Epson Stylus Pro 3800 Printer Driver v8.64

Please help...I'm a new user...how do i print- select paper Epson options and make colour adjustments using iphoto and Epson Stylus Pro 3800 with Printer Driver v8.64

Yes, do share your solution for others who may want to do the same with their special profiles and printers.

Epson Stylus Photo R2400 won't print large pages?

I recently upgraded to Mac OS X Leopard. I immediately had problems with printing to my Epson Stylus Photo R2400 as a print driver gutenprint had suddenly replace my Epson driver when going thu dialog to print. Called and Epson and they got me thru process of getting rid of the newly replaced gutenprint to an Epson driver. Problem is I can't print anything larger than an 8.5x11 page. The printer set up says and shows me that what I have set as an 11x17 or 13x19 is going to print. But all that prints on this large expensive paper is an area 8.5x8.5. No matter what I change in set up. Epson says they have done all they can do. (And I just found out last week they have replaced this printer with another printer). I have hundreds of dollars in newly purchased inks and I am wasting expensive paper.
Also I had to remove the patch for OS leopard to get the printer to work in this diminished capacity.
And my email signature disappeared. Can't get that back either.
But printer is my biggest problem. Any suggestions how to get this printer to work with this new OS leopard and print large sizes? I have deadlines and hate to outsource the printing when I could easily do it in house.

Well, you picked the very hardest way to do it, and as time goes on, you will probably discover many other things wrong with your system as well. You CANNOT go back to Tiger from Leopard via an archive and install; you have to wipe the drive and start over from scratch, and then transfer all your data over from a backup and reinstall most, if not all, of your applications so the right elements are in the right places. Even so you'll never get your system exactly back to where it was, unless you had a perfect bootable Tiger backup (via SuperDuper) and merely restored from that. Obviously whatever Leopard element that killed your printing capability is still on your frankenstein system of BOTH Tiger and Leopard parts.
There are hundreds of posts on the issue of reverting to Tiger from Leopard, many quite detailed. So many things are changed from upgrading from one to the other that what you attempted (unless you completely wiped the drive and all your data) has always proven disastrous, which is why I highly recommended against it after reading hundreds of horror stories here.
I suggest doing a search at downgrading from Leopard to Tiger, following those instructions if you can, and making the best of it. You'll find that springing the $200 for an external drive would have been a much better and easier solution, because it can come in very handy if you ever need to do any maintenance on your internal hard drive, or if some update or problems kill your internal drive and you can't even boot the system. Not to mention sooner or later always needing more storage capability, and even a drive for reliable backups.
I would never dream of attempting a downgrade or needing to do it in the first place (having taken precautions as to never have to), so I can't give you any further advice than that.

Bought a new Mac Pro, purchased a Firewire to Thunderbolt adapter, then hooked up Epson Stylus Photo R2400 printer but the system preferences does not see the printer. Started, restarted, hit the " " to add a printer but no go.

How to connect via Firewire/Thunderbolt adapter an Epson Stylus Photo R2400 printer to a new Mac Pro

When you switch from USB to FireWire, you have essentially installed a new (i.e., different) Printer.
In the Add-a-Printer dialog, delete[-] the existing Printer queue which is set up for USB. Then, with the Printer connected via FireWire, Add [+] a new Printer queue and it should set it up correctly this time.
To go back to USB, you would have to delete and re-add in a similar fashion later.

Using iMac, Aperture 3, and & Epson Stylus Photo R1800 printer: How come my prints look like trash?

I have calibrated my iMac Intel Core i3 and printing through Aperture 3 with an Epson Stylus Photo R1800 is not producing great results. Cyan is dominating along with blue lines through the grass in the picture. I figure the lines are a result of clogged head...but the fact the prints are not close to the image on the screen is alarming. HELP!!!

SFSteinie,
There is an Aperture forum, I'd recommend reposting there and perhaps another R I 1800 users has some insight you may not know about.

Anyone else having difficulty with Adobe Photoshop CC and Epson Stylus Photo R3000?

Everytime I try to print an image from Photoshop CC to my Epson Stylus Photo R3000, it can't seem to find the printer. I have no problem printing the same image from Lightroom 5 or Preview on Mac. The printer shows in the Photoshop Print Dialogue box but after I click Print the print queue just says searching for printer and can't find it. I can print a test page from the printer Utility and anything else I try, just not Photoshop CC. I'm running OSX 10.9 Mavericks. Thanks.

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/photoshop

FIX for EPSON Print CD V2.02 - EPSON Stylus Photo R200 - MAC OS 10.5.9

I thought I'd post this ridiculously long info sheet on what finally got my R200 to work with EPSON Print CD and 10.5.8 just in case it might help someone else BEFORE they spend days searching for a solution.
Check the printer driver information in System Preferences, Print & Fax. If it says anything other than EPSON SP R200 Series, you’ve likely located the problem. My system showed the Gutenprint v5.1.3 and /or CUPS/+GIMP... I originally replaced the Gutenprint driver file with the CUPS... file thinking this would solve the Gutenprint driver problem. But, as I continued to look into what was going on, I think I found out that both driver files are actually considered Gutenprint driver files.
1. Select the hard drive where the operating system is located.
2. Select Library/Printers.
3. Select the Epson folder and delete it and then Empty Trash to make sure it’s gone.
4. Select Library/Preferences.
5. Select the Epson folder and delete any files that are there.
(Steps 4 & 5 might not be necessary, but I’m listing everything that I did.)
6. In System Preferences, select Printers and Fax. Control click in listing area and select Reset Printers.
7. Load the Leopard Installation CD and select Optional Installation.
8. Select Printers and select Epson. This will reload the printer drivers for all the EPSON printers that are included on the install CD.
9. Go back to the System Preferences, Printers and Fax window. Click on the + sign to add a printer.
10. There will likely be a listing with Printer Name as EPSON Stylus Photo R200, Kind as USB.
11. Click on an arrow in the Print Using: box and select EPSON SP R200 Series. The printer icon changed dramatically at this point, with a rainbow of colors on the document shown coming out of the printer.
Note: **Working within the Print & Fax app seems to be key to getting the settings corrected.** Someone else pointed out that they also found this necessary. However, I couldn’t get the proper “Print Using:” option to appear until I cleaned out the Library/Printers/Epson folder, “Reset Printers”, and reloaded the EPSON printer drivers from the Leopard installation CD.
I had previously done the “Reset Printers” and reloaded the printer files, but as was advised against in the post I mentioned, I selected the “More Printers” option. That’s where I found the EPSON Stylus Photo R200 listed with the CUPS+Gimp ... and the Gutenprint driver listing options. Selecting what appeared to be the Gutenprint alternate printer driver didn’t help at all. I’m not sure if the EPSON SP R200 driver file was missing from the original listing of printer drivers or if I just missed it. I certainly would have looked for it if I had known it was the one that’s needed.
12. Open the EPSON Print CD V2.02 app. Although I had already installed the Easy Print update, I got a message saying that the application needed the update to work. So, I reinstalled the Easy Print update.
13. After reinstalling the Easy Print update, I reselected Update Printer Information. Much to my amazement, I got a message and a progress indicator showing the Printer Information was being updated to reflect the EPSON Stylus Photo R200 printer.
14. When the Update Printer Information process had completed, I clicked on Print and suddenly found that I was able to choose Select Printer and pick the EPSON Stylus Photo R200 and CD/DVD wondrously appeared in the Media Type.
After this point, all the other instructions that are provided from EPSON seemed to work just fine.
Hopefully, there’s enough information in here somewhere that people with other operating systems and printers might at least be able to get a clue . . .

I dug around on the Epson site and found this which seemed to address the exact problem so they obviously know about it. Unfortunately even these rather drastic steps failed to solve the issue for me.
http://www.epson.co.uk/Printers-and-All-In-Ones/Inkjet/Epson-Stylus-Photo-2100/D rivers-Support?target=article&extn=.html&articleId=3798

How do print from iPhoto to Epson Stylus SX218 ?

how do i print photos from iPhoto to Epson Stylus SX 218 ?

Are you having a problem? If so describe it in detail and tell us what fixes you've already attempted.
OT

Belkin Print Server support for Epson Stylus photo R200

I have just installed a Belkin Wirless G adsl modem router, which works very well and I very satisfied with it. Along with this I purchased a Belkin Print server F1UP0001uk to drive my Epson stylus photo R200. While I can see my Print server and ping it satisfactoraly and it can see my printer. I can't get it to print.
Belkin tell me that I have to change the CUPS port from 515 to 9100 for print server port1 or 9101 for port2 on each machine I want to connect from.
How do I do this?
G4 Mac OS X (10.3.9)

What they are describing is the HP Jetdirect protocol on OS X, called raw/port 9100 printing on Windows. To use port 9100, in Printer Setup, select IP printer > HP JetDirect and it will work (9100 is the default port number). To use port 9101 requires the advanced method. In Printer Setup, after you click ADD, hold down the option key while clicking More Printers (you may need to pause a bit before the More Printers, because OS X is searching for Bonjour printers). At the bottom of the new menu, select Advanced, then select Appsocket/HP Jetdirect. Name it. Fill in the URI like:
socket://[IPofserver]:9101

Tiger and Epson Stylus Photo 870

I just upgraded to 10.4.11 from 10.3.9. My Epson Stylus Photo 870 (USB connected) was working fine under Panther. However, now with Tiger, I can't get it to print. It still works fine in Classic mode. Had the same problem with Tiger and my HP 1200 but, after reinstalling the HP software from the CD, that works fine now in Tiger. Tried reinstalling the Epson software also, but it still won't print in Tiger. What am I missing?

Thanks to all the advice I found in earlier posts. I downloaded and installed the Gimp drivers and everything works correctly now.

Mavericks AND Epson Stylus Photo R280-driver?

I just removed one EPSON Stylus Photo R280 and plugged in another one of the same model. Can't find the printer when I send something to print, so I deleted the printer from my printer list and then added it back. It wants to go to the Apple server and get the software, which it says is available. When I hit add, it looks and says software is not available. The old printer was runnning printing fine, so obviously there is a driver. How do I get it to recognize it?

What if you try deleting the /Library/Printer/EPSON and the/Library/Caches/Epson/ folders and then reinstalling the updates?

IPhoto 6 and Epson Stylus Photo 2200 Printer

The photos that I print from iPhoto 6 to my Epson 2200 printer are all coming out way too green. What settings do I need to use in the print dialog -- and color management? -- to get decent results? I can print beautifully from Photoshop CS2 to the 2200. I just can't figure out what settings to use in iPhoto. Thanks in advance for your help with this question. _sidpink
G5 Tower Mac OS X (10.4.6)

Kingstone's reply was helpful even though a little discouraging. But it made me realize that the problem probably lies with the choice of which software is doing the color management. The Epson 2200 printer driver provides some "advanced" settings in the print window, and I had been specifying "No color adjustment," because that's the setting recommended when printing from Photoshop. I had simply been trying the same setting when printing from iPhoto. But I went back and printed a photo from iPhoto using the "Color Controls" setting (without changing any of the variables), and the print came out perfectly! So I've answered the question to my satisfaction thanks to Kingstone's reply -- and I don't have to go out and invest in Photoshop Elements.
G5 Tower Mac OS X (10.4.6)

Printing from iPhoto to Epson Stylus R1900-Lack of Layout and other options

I have just begun using my MacBook Pro for photo use, and also just acquired an Epson R1900. When I print from iPhoto to the R1900, I can only print 1 photo per page. The usual Epson screen which has an option to change layout, e.g., to multiple photos per page does not appear. If I try to print from Mail the usual Epson screen does appear. Why not in iPhoto like it always has in the past on my iMac when printing to my previous, Canon i950? This is a major concern to me since my wife likes to keep our photos as multiples per page in a scrapbook. I'm using iPhoto '09, vers. 8.1.2., and OS 10.5.8, and the latest update of the Epson driver for the R1900 which claims to be fine with OS 10.5.8.

Well, I found how to get to "Settings." There is a button in the photo area entitled "Customize," which leads to a screen with various options on the bottom, one of which is "Settings." If I click on that I get a small dialog box including the option to select "Multiple Photos per Page." So far it looks like I need to do some very tedious custom sizing to get, say, 4 photos on 1 8x10 page. There is a "Layout" button on the "Customize" screen; however, it only wants to give me horizontal or vertical page orientations; or ones which have the option of adding a title underneath. In the past, if I choose multiple photos per page (or "N up") I could then choose how many: 2, 3, 4, etc photos per page and the program sizes them accordingly. I still get that when I use my old iMac with iPhoto '05 to print to the Epson R1900. Works nice and easy.
Also, I'm confused by the fact that iPhoto '09 does not allow a "Page Setup" file command. This is making it difficult for me to get the photos oriented in a way that they will fit in groups. So far, iPhoto '09 is proving to be very awkward to work with compared with my past experience with iPhoto '05.

Problem printing Lightroom 5.4 on OSX 10.9, Mavericks to Epson Stylus Photo R2400

When I print, only the lower left 3rd of the page has any ink on it and it is only a window into the middle of the image. The quality of the print is fine and it prints normally in Photoshop CS6. What's up with LR 5.4? I have tried everything from resetting the printing system to reinstalling the entire OS to upgrading to a new MacPro. Still the same problem.

Thanks for the idea. When I try it in Photoshop, it works. But when I set up the paper size in Aperture to reflect the size of my panorama and try to print, I get an error message that the paper I've loaded in the printer (roll paper) is not appropriate for this print job. Aperture obviously expects a paper sheet with those dimensions. The problem seems to be that in Photoshop, when I click the "Page Setup" button in the "Print with Preview" dialogue box, I change the paper size directly in Mac OS X's paper settings. However, in Aperture there's no button like this, but only a list field with paper sizes and a box to type in a custom size. Even though it looks very similar, the functionality seems to be different.
Am I missing something?

Problems printing using iPhoto and Epson Stylus Photo R2400

Similar Messages

Maybe you are looking for