Problems printing with adobe while online

every time I attempt to print a pdf that I am looking at on the internet, adobe locks up the internet and will not print the pdf. If I save the pdf to my computer and then print it, there is no problem and it prints like normal. Can you help?

Hi msumoore,
What browser are you using? Does the same problem occur with different web browsers? When you do print from the web browser, are you using the print button that appears when you scroll over the bottom of the PDF?
Best,
Sara

Similar Messages

Problem printing with Adobe Acrobat X pro. No File Save As dialog

We have a C++ program to print a formatted report, by selecting the configured printers. "Adobe PDF" printer is available on install of Adobe Acrobat Pro.
During report print when "Adobe PDF" printer is selected, the report use to get printed in a PDF document & saves at the path provided by the User.
Internally it uses printer APIs like OnBeginPrinting, StartDoc, OnPrepareDC, StartPage, OnPrepareDC etc.
Report printing was working fine with Adobe Acrobat Pro 9.1. But since I installed Adobe Acrobat X pro (with update as 10.1.3) I am unable to print PDF document using "Adobe PDF" pinter.
StartDoc API does not pops up the "File Save As" dialog at all.
Any help in this regard, would be very useful.
Note: My code is working fine, if I use freeware like CutePrinter.
Thanks,
Amit Agrawal

Interesting. My approach would
1. Try on a different system if available. If still bad...
2. Try to create a simple test application with CreateDC and StartDoc, and really nothing else not absolutely needed.
Test that. If it is good, look for other problems in your application (e.g. memory overwrite).
If your little example is still bad, post it here and other people can try and compare your results.

Cannot Print with Adobe XI

Up until yesterday, I had no problems printing with adobe to pdf from any application on my system at work.
Now, using crystal reports, I can no longer print to PDF to a folder. First, I was shown a message that the file could not print and was deleted. I reinstalled and then began getting throught the point of defining a location as to where the pdf was to be saved. When I print it there, the PDF never displays and does not end up in the specified folder (or anywhere for that matter)
I have uninstalled and reinstalled, and even tried changing printer ports to no avail.
Any help would be appreciated.
thanks

Hi pkrs1138,
Kindly post this query in Acrobat forum:Acrobat
Regards,
Florence

Can't printe with Adobe Reader 10.1.2

I recently downloaded Adobe reader 10.1.2 and can no longer print single pages. In particular I can't print 1 page documents. I select print and then click "Print", the print dialogue box comes up but it does not change from 0%, the box closes and nothing comes through to my printer?? If I print multi-page document then it prints OK. I had no problem printing with previous versions including 10.1.1 and can't go back to previous versions whenI try to re-download. Has anyone else had this problem?

Please try the solution provided on: http://kb2.adobe.com/cps/928/cpsid_92870.html
That should fix things.
Ankit

"There was a problem communicating with the Apple Online Store. Please try again."

When I try to order prints on my Macbook I get the error .... "There was a problem communicating with the Apple Online Store. Please try again." I've gotten this error for a few days. When I try the same thing with my wife's Macbook Pro there are no issues. How do I fix the problem on m Macbook?

I found the problem thanks to some help given.
Go to iPhoto menu -> Preferences... -> Advanced -> > Print Products Store was set to "none". I changed that to my own country and then it worked, I could place the order.
Thanks a lot!

Barcode printed with Adobe Reader XI cannot be recognized by barcode reader

Dear Support,
We are generating barcode and convert it into pdf using Crystal Report for .NET Framework 2.0.
The pdf is opened with Adobe reader XI / FoxitReader 4.3.1. And it is printed with Avery Dennison AP 5.4 300DPI.
When the pdf is printed with Adobe reader XI, the barcode cannot be read with barcode reader, but when it is printed with FoxitReader 4.3.1, barcode can be read with barcode reader.
I've compared the two printed barcodes and found Adobe printed the lines thicker and the characters wider. Thus, two lines sticked together and become 1 line. As result, it cannot be recognized by barcode reader.
Could you explain why did this occur and how can I fix it in Adobe? Are there any settings I can change to solve it?
Thank you very much.
Operating System: Windows Xp or Windows 7
Application: Adobe reader XI or FoxitReader 4.3.1

Thanks Pak,
I've attached the pdf on:
https://files.acrobat.com/preview/47dde05c-4835-4bdc-881f-c406f8056f01
As the problem I've described in the post only occurs on specific printer, I've found a way to reproduce the barcode problem in most of the printer.
From the pdf I've provided, you may print it with Adobe and Foxit, using a printing scale of 190%.
For the Adoble one, you may observe some white lines in between the labels, and the Foxit, there are no white lines.
I do believe that two problems are related. Do you have any idea on that?

As we are having a problem explicit with Adobe Reader 11.0.07, we are interested in news and dates for coming updates to Adobe Reader. Can I find information about this anywhere ?

As we are having a problem explicit with Adobe Reader 11.0.07, we are interested in news and dates for coming updates to Adobe Reader. Can I find information about this anywhere ?

Hello Claus,
you could have a look here: http://helpx.adobe.com/security/products/flash-player/apsb14-13.html and in german language http://www.chip.de/downloads/Adobe-Reader_12998358.html
In all These cases Google could be "your friend".
Hans-Günter

Can I merge comments from 2 pdfs with Adobe Acrobat online?

Can I merge comments from 2 pdfs with Adobe Acrobat online? If so, how?

Hi gignc,
You can't merge comments using any of the Acrobat.com online services (ExportPDF, Adobe PDF Pack, and so on). But you can with an Acrobat subscription. Please see Adobe Acrobat X Standard * Publish comments from other reviewers from instructions.
Best,
Sara

Cs3 problem printing with mavericks

cs3 problem printing with mavericks

Hello @arcticbear38,
Welcome to the HP Forums!
I understand you're receiving a small portion on the left hand side of a document missing on both printers. I will do my best to assist you! Does this happen when you print from one program or many program(s)?
Both of these printers are not indicating low on ink? I would recommend resetting the printing system on your computer by following this Apple document here. I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

I am having problems printing with my HP 800PS design jet.

I am have problems printing with my HP 800PS design jet. I have to call IT all the time and it is losing its print settings and the print screen will freeze uot all the time. I am told that HP does not support this product any more.

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I have problems printing with a HP Officejet 6500 printer directly from my iMac. The printer itself does function well, as I can print from another PC without any problems. Does anyone have a clue?

I have problems printing with a HP Officejet 6500 printer directly from my iMac. The printer itself does function well, as I can print from another PC without any problems. Does anyone have a clue?

Hello:
I must apologize . I should have checked here first:
http://support.apple.com/kb/HT3669#HP
According to the list, there is no driver for your printer included in OS X 10.7.
There are a couple of options:
1. Contact HP to see if they have a workaround.
2. If the model of printer is not listed but your printer is a PostScript printer or PCL Laser printer, try the "Generic PostScript" or "PCL Laser printer" drivers. Generic printer drivers may not let you access all the features of your printer.
I have not tried #2, but some people have had success.
Barry

Problems printing from Adobe 9

Hi, I am having problems printing from Adobe 9. I can open documents OK but when I try to print them it takes me through the normal print screens, then when I press print it says unable to print document followed by page not selected.
I have also try to delete Adobe 9 and reinstall but when I come to reinstall, I have to click on the grey box at the top of my screen to agree to allow the instillation to take place and everything just freezes up and I have to ctr alt del to move on.
Everything was working fine until the last couple of days
Any help would be much appreciated

My problem is the printing will eventually happen but I have to wait for as long as half an hour. What gives? Are there worms in the Acrobat 9 product? How can I resolve this problem?

Problem with Adobe Help Online

Dear sir,
Hi, My name is Palm.
I have a problem with Adobe Help. Every time I use the function "Leyer Style" >> "Gradient Overlay".
Adobe Help Online is often displayed without my pressing or click anything.
It was a problem with my work.
I have to restart the program. To work again.
Thanks for the help.

Thank you.
It's excellent for this solution.
I have solved the problem as suggested.
Now the problem is still not found but I will monitor this issue further.

Problem printing in adobe reader

Hi,
I wonder if any one can help me? I am not able to print pdf documents in adobe reader. I keep getting the following error: "pstopdfilter had an i/o error while writing output."
I am very new to mac, and a novice in general computing so I have no idea how to solve this problem!
Thanks

Hi,
Thanks very much for your reply. I have an Epson Aculaser M2000. I have checked the drivers for Yosemite and they are still to be updated...so this may be the problem. However, I can print word documents and through preview, but I only have a problem with adobe. I am really a novice so I am not sure about the second part of the question. When I get an error message it is long and complicated with heading saying:
"pdfoescape quit unexpectedly".
Some of the text is as follows:
Crashed Thread:        0 Dispatch queue: com.apple.main-thread
Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
Exception Codes:       KERN_INVALID_ADDRESS at 0x0000000000000068
VM Regions Near 0x68:
-->
    __TEXT                 0000000100000000-000000010014d000 [ 1332K] r-x/rwx SM=COW /Library/Printers/EPSON/LaserPrinter/GD2/filter/pdftoescpage.app/Contents/MacOS /pdftoescpage
I am sorry to bother you with this!
Thanks for you help

HT2506 Is there anyone else who is having problems printing with Preview since upgrading to Lion OS X?

Since upgrading to Lion OS X, I have not been able to print any of my documents that were created in Adobe PDF. All calls to customer support have been a bust.
When I try to print anything it comes out looking like this:
Apple PREVIEW team!!!! PLEASE HELP!!!

Hi Linc...
Here is a copy of your prior post to me on a different forum...
Still no resolution...
Linc Davis
Re: Anyone having problems with Preview since upgrading to Lion OS X? When using a pdf form that allows multiline text, I am finding that the printing is completely illegible. The lines are stacking on top of each other.
Mar 11, 2012 3:13 PM (in response to pshrynking)
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, selectHelp from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.
pshrynking
Re: Anyone having problems with Preview since upgrading to Lion OS X? When using a pdf form that allows multiline text, I am finding that the printing is completely illegible. The lines are stacking on top of each other.
Mar 11, 2012 4:13 PM (in response to Linc Davis)
Did all of that yesterday, with the Apple Representative on the phone, and nope, still a problem...it was kind of exciting, really, they kept going up and up the tiers of support until I got disconnected...Fortunately I had the email address of the gentleman who was helping me so that I could email him back and let him know that we got disconnected...as you might imagine, he still has not emailed me back. They were able to receive a copy of the form that I use for charting and try it in their facility on their computers, so we know:
1- it is not just my computer.
2- it occurred only after installing Lion OS X, not sure if they have tried it on Snow Leopard, but that's what I would have done if I was them...assuming that somewhere in Apple someone has not upgraded to Lion.
3- it is not just my software.
I think the problem is with the newer iteration of Preview not communicating well with the Adobe .pdf. probably some line of coding that needs to be written and insertedinto their program for multiline text.
:-) Thank you for your help!

Problems printing with adobe while online

Similar Messages

Maybe you are looking for