Problems publishing in Edge.

When I want to publish and I go to file>publish the word publish stays grayed out.
How can I activate this?
Thanks.

... also, have you saved your Animate composition yet? (i.e. File > Save)
You need to save the project before you can publish.

Similar Messages

Problems publishing to iweb

I just want to thank everyone who post on here as your advice really does help.
I had problems publishing to iweb and the following suggestions made by you all helped me overcome the difficulties I was having. I am posting this so that others who may be having the same problems as I was may sort their iweb out too!
Obviously not all of these will help everyone and some people may disagree with what I have said but (touch wood) these ALL sorted out my iweb
1. Empty your cache frequently.
2. Do not use web counter/email me buttons
3. rename your photos so that you are not using !@£$%^&*()_
4. keep trying
iBook G4 Mac OS X (10.4.5) http://web.mac.com/gillianward/iWeb/Site/Welcome.html

No, its not strange at all. When you set up a MobileMe account and publish a site from iWeb it publishes to your iDisk, which is your Apple server that host your site.
Your url for an iWeb published site to MobileMe will be http://web.me.com/username/sitename. You don't actually need the sitename if you only have one site, so as OT has said http://web.me.com/username.
No - reggie88.com is not your username, this is a domain name. www.reggie88.com is a domain name also, not a MobileMe username. Have you actually gone to a domain name registrar and registered a domain name? If you want to use a domain name with MobileMe, then you need to go and purchase one first from a domain name registrar.
No - iWeb does not tell you in iWeb that you username is www.reggie.com. The only way that iWeb will have this at the bottom, is if you have logged into your MobileMe account and gone to the Personal Domain name settings section and entered a personal domain into here. Log into your MobileMe account and check whether you have done this - this is the only reason why iWeb will display this.
Next question, do you actually own or have you purchased a domain name - reggie88.com? If you have, then you can use this domain with a MobileMe account, but there are other steps that you need to go through first to link the two.
In the meantime, find your site by entering the url http://web.me.com/username which in your case is probably going to be http://web.me.com/reggie88 and you should get to your site.

Problem Publishing Handouts to Word 2003

I am having a problem publishing from Adobe Captivate 4 to Word 2003. I have followed all steps to create the file:
Open an Adobe Captivate project.
Select File > Publish.
In the Publish dialog box, select Print.
In Project Title, enter the desired name without the filename extension (.doc).
In Folder, enter the full path for the folder in which to save the file or click Browse to locate the folder.
Select an Export range. The export range is made up of the slides that you want to export to Word. You can select all slides, the current slide, a selection, or a range of slides.
In Type, select Handouts.
Select from the following Handout Layout options: Use Tables In The Output, Slides Per Page, Caption Text, Add Blank Lines For Notes, etc.
When you finish, click Publish.
The problem occurs when I open the Word doc--all slide notes and info is there, but the images themselves are not in the Word doc. I have tried publishing as a storyboard, lesson, handout and step by step--the issue occurs in all scenarios.
Thank you!

Hello
Perhaps you already checked it, but I did not read it in your posting: in the Handout Layout Options, did you activate 'Include objects and Question slides'? Those objects are all the 'graphical' things like images, the captions (not the text in the captions), the drawings...
Lilybiri

Reconnectivity problem (2G/3G/Edge) on the new iPad.

When do we get the up-date to solve the reconnectivity problem (2G/3G/Edge) on the new iPad? When will Apple admit to the proble?

Never.They only want our money.

Problem publishing my iWeb site to new server

I have a problem publishing my site to a new server HostGator.
I click publish, everything continues normally, then I get an ERROR notice:
Publish Error
There was an error communicating with the FTP server.
Try again later, or check with your service provider
Since I changed the settings for the new server all the iWeb pages symbols go pink every time I close and reopen iWeb. Once I have tried to publish and get the ERROR notice I see that most of the pages have turned blue (suggesting they have been correctly published) and the same 5 pages remain pink (suggesting they have not been published) I have used the HostGator link
http://gator694.hostgator.com/~carouge1/carouge-art/Welcome.html
to look at the uploaded pages.
All the pages are on their server file BUT the pages which remain pink on iWeb have problems. These problems (missing photos etc.) don't seem to affect the pages when the site is called up normally. The site is apparently still being uploaded to people’s computers through MobileMe eventhough I have changed the server settings! So I’m assuming the page problems will show up after MobileMe stops at the end of this month? I cannot find an explanation for the failed pages from HostGator or from the Apple online answers.
Grateful for any advice.

I am having a similar problem trying to upload from iWeb through FTP to MacHighway web hosting.
I am using iWeb 3.0.4, the latest version.
I have followed the instructions on the MacHighway site: https://customers.machighway.com/knowledgebase.php?action=displayarticle&id=10
When I type "public_html" into Directory/Path window in iWeb I get the following message:
Testing failed.
The directory/path couldn't be found. Verify your settings and try again.
When I type "/public_html" or /public_html/" into Directory/Path window in iWeb I get the following message:
Testing failed.
A connection to mel.machighway.com couldn't be established. Verify your settings and try again.
Unlike carougeart, however, nothing gets uploaded.

Immer noch Probleme mit Adobe Edge Animationen in Firefox

Hallo zusammen,
vielleicht kann mir jemand helfen....
Mein Entwurf enthält Adobe Edge Animationen und funktioniert auf allen Browsern perfekt    - bis auf Firefox...da passiert gar nichts :-(
Link zum Entwurf: http://objektplanung.fermor.eu/
Das Problem mit Adobe Edge und Firefox war ja letztes Jahr schon Thema....
Aber dieser Blog hier     http://blogs.adobe.com/edge/        beschreibt ja eigentlich das Adobe das Problem mit diesem Fix 6.1 gelöst hätte ??!!
Irgendwie stehe ich auf dem Schlauch....auch irgendwelche Tricks im Netz den Mimetyp von "text/javascript"   auf "Application/javascript" zu tauschen und den Typ in einer
.htaccess zu definieren blieb erfolglos
Meine Adobe Software ist auf dem allerneusten Stand und meine Firefoxversion ist 21.0
Wäre für jede Hilfe und Hinweise sehr dankbar :-)
Beste Grüße
Martin

Mein Problem wurde in Teamarbeit in dem wirklichen tollen und hilfsbereiten Adobeforum geklärt.
Wer ebenfalls ähnlich Probleme hat kann sich diese Diskussion hier anschauen:
http://forums.adobe.com/message/5466762#5466762
Besten Dank und viele Grüße
Martin

I'm having problems publishing my videos to You Tube

I'm having problems publishing my videos to You Tube, I keep getting the error message: 'Login failed. Specify the correct username and password, and try again.
I have tripled checked my username and password, so I know I'm entering them correctly.

Never mind I found the problem. I had Firewall set to Specific Applications instead of Allow All Incoming Traffic.
Alan

Publishing Adobe Edge in existing HTML having problem in IE / Firefox?

I have integrated the Edge in HTML TD tab and it working very well in Chrome. However, it display nothing in IE and wrong in Firefox.
Anyone can help???
http://www.ctmotorfairing.com/Test/index3.html

I am sorry, I can't explain my facing problem very well.
Actually, this project run very well in Chrome, firefox and IE after published. (Stand alone)
http://www.ctmotorfairing.com/Test/index.html
However, after I integrated it in my existing HTML, in IE and firefox can't display any more. (Chrome is Perfect)
http://www.ctmotorfairing.com/Test/index3.html
Anyone can teach me how to make it correct integrated into my HTML position?

Problems with refine edge in CS5-no longer working properly?!

Hi all, just wondered if anyone has experienced this bizarre problem and if so how they went about fixing it or changin the settings! (i may have done something to photoshop for it not to work properly!!!)
Basically, i have got CS5 and was very excited to find the refine edge tool.... made cutting out people real easy and loved it.... however, for some reason the refine edge is not working anymore. Everytime i try to refine the edge using the refine edge tool it isnt selecting any fine details of the cut. It seems to be erasing the image with a low opacity making the selection very blurred?!
Hopefully you can see from the very quickly put together example that the refine edge tool is taking pixels out if her nose, chin, jumper neck and jumper! Any one know how to prevent this from happening?
Thanks! Matt

I am having the same problem with the refine edge tool. It seems to work the exact opposite of what I was expecting.
The above two images are before and after using the tool to refine the edge. As you can see from the picture without the mask view, the selection actually got smaller after I tried to add to it. When I use the other tool to erase an edge, as soon as I release the mouse button, the portion I tried to remove reappears as it was before. This has never worked properly for me. Also, I have tried outputting in several different ways.
As for the questions posed: The app and OS are up to date. I am the only user on my computer, so I'm not sure what using another user would accomplish. I will mention that I'm using Windows 7, not Mac. I'm really hoping there is a setting I have wrong somewhere.

PI 7.1 problems publishing a WSDL of a sender soap adapter

We have upgraded our dev system from XI 3.0 to PI 7.1 and now I'm facing a problem with SOAP adapter. I have searched for answers here for a while but couldnu2019t find them. That why I start an own thread.
I thought with PI 7.1 it is very easy to publish the WSDL of SOAP adapter respectively a sender agreement. All you have to do is to choose your sender agreement and select the menu item "display WSDL" There you can get the WSDL and a WSDL URL. So it would be possible to deliver this URL to my partners. But while checking this URL respectively the delivered WSDL I've found a problem.
First of all the the WSDL URL doesn't look really good:
http://<server>:<port>/dir/wsdl?p=1_1ce2e954fe9632818bfff6c32f370748_portTypeBindingService
But it works. If I call this URL with a browser or with XML Spy I get the correct WSDL. Any chance to get a better readable URL?
The next thing is the proposed soap:address location in the WSDL. It has the following form:
http://<server>:<port>/XISOAPAdapter/MessageServlet?senderParty=&senderService=MYSERVICE&receiverParty=&receiverService=&interface=MYINTERFACE&interfaceNamespace=MYNAMESPACE"
If I compare it with the documentation i can see that the URL is completely different.
http://help.sap.com/saphelp_nwpi71/helpdata/en/43/951aceb1146353e10000000a11466f/frameset.htm
But again if it works all is fine but it doesn't work at least it doesnt work with XML Spy. The reason is the use of "& a m p ;" instead of only "&".
If I create a SOAP request with XML Spy an sent it to the XI I get the following error message: " Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=null;TS=null;AN=null;ANS=null;"
But if I change the SOAP request parameters replacing all the "& a m p ;" with "&" then it works.
Any chance to manage this? If I provide a WSDL on this way I want that my partners can use this "out of the box"

Kulwant
Yes of course I can change that manually but therefore I have to save the WSDL to my local hard disc, change the WSDL and send it to my partner via mail. This is exactly the way I've done this till now. But with PI 7.1 I like to use the new opportunities.
Bhavesh
I have also no Service Repository till now. That's the reason why I want to use the way described in my initial post.
In PI 7.1 you can open the corresponding sender agreement of you SOAP adapter. There you find a menu item "display WSDL". If you choose this you get a window which displays the correct WSDL and an URL where you can find the WSDL too. If you copy this URL to a browser you get the same WSDL too.
http://help.sap.com/saphelp_nwpi71/helpdata/en/31/daa0404dd52b54e10000000a1550b0/content.htm
First part of my question is regarding to this URL. The URL has a strange format.
The second part is regarding to the form of soap:address in this generated WSDL. Here I have problems with the use of this "& a m p ;" string. But I have no influence on it. If I deliver my partners the obove mentioned URL to the WSDL and the WSDL contains this soap:address URL my partner will probably have the same problem like I with my XML Spy.
Gaurav
I don't understand you answer. I know the correct soap address but the IB tool generates it with this "& a m p ;" string instead of only "&". Thatu2019s the point. No idea if and how I can handle this.
But thank you for the note number. Was helpful. The number is in the online documentation too but I've read over it.
To bad that the online documentation isn't correct regarding to the soap address. But believe me the German version is even worse. There you can find the two soap adapter settings (XI parameter: interface namespace, interface) that are no longer existed in PI 7.1
Now I will test if a .NET application can handle this soap address correctly.
Edited by: Gil Ritter on Nov 14, 2008 11:25 AM

Problems publishing to MobileMe after upgrade to iWeb '11

I have a web site created in iWeb '08 which worked well. Upgraded to iLife '11 this weekend.
I opened iWeb and the pages of the site showed as having been changed (page names displayed in red). I added a countdown timer widget to the main page to see what it would look like and selected to republish the entire site to MobileMe.
iWeb had been chugging for hours now (tried this twice). The little "pie" progress icon next to the site name shows that the site is almost done publishing (showing a complete "pie") but it looks like it is still chugging.
I checked my site online (www.cruisenotebook.com) to see if it was the progress icon that was incorrect but am noticing that many elements are mising. The menu at the top of the page is missing, the countdown widget is not showing, an HTML snippet on the main page is not showing and any photo galleries are empty. So maybe it hasn't completed publishing...?
iLife '11 is new, so I don't know if anyone has had much change to work with it, but since iWeb did not change in this release, maybe someone has had similar problems with iWeb '09? (I didn't upgrade to iLife '09 because I wanted to avoid upgrade issues, but I was worried about getting too far behind the current version so I upgraded. This'll teach me!)
Mike

Old Toad wrote:
Try the following:
1 - close iWeb.
2 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder.
3 - go to your User/Library/Caches/com.apple.iWeb folder and delete the contents.
4 - reboot.
5 - launch iWeb and see if there's any improvement.
If that doesn't help continue:
6 - move the domain file from your User/Library/Application Support/iWeb folder to the Desktop.
7 - launch iWeb, create a new test site and save.
8 - go to the your User/Library/Application Support/iWeb folder and delete the new domain file.
9 - move your original domain file from the Desktop to the iWeb folder.
10 - launch iWeb and try again.
OT
Tried this suggestion. The new test site publishes correctly. I put the original domain file back into the folder and tried republishing. A similar error is displayed (a different file name however). I did get more the site published though. The menu appears on the pages now, but there are still some elements on the site that do not appear.
I am going to try publishing the site to a file and see how that works.
Thanks for your help, though!
Mike

Problems publishing shared review comments in Acrobat 8.0

I created a shared review in Acrobat 8.0 and posted it to a Sharepoint workspace. A reviewer published comments but I was not able to see them. He double-checked, and he was able to see his comments but I was still unable to see them. He checked again, and was not able to see his comments.
I can see comments the reviewer published on a different date, but the reviewer is no longer able to see those comments either. Has anyone had a similar experience?

I'm having a similar problem and didn't see a solution posted.
I'm using Acrobat 8 Professional to do shared document reviews. I created a sharepoint shared documents folder which the shared document review process verified and accepted as a destination.
I used the Review and Comment process to save the pdf document to the folder (enabling those using Reader to review and comment) and send an email inviting specific individuals to review and comment.
The problem is when they open the document (using the URL in the email) they don't see the "toolbar" that lets them Publish Comments to Server. They all have Reader 9.
Until I figure out what the problem is, I'm using a brute force technique to force publishing comments, instructing them to close the browser and then Publish Comments using the dialog box that appears after the browser has closed.
Any suggestions how to get the toolbar that lets them look for published comments and publish their comments to display ?

Problem publishing Photo page with iWeb 08

Hello,
I have a problem when publishing photo pages with iWeb 08. Upload starts and then I get the error message that iWeb encountered a problem while publishing. The funny thing is that I can see
the photo page in Safari. The only problem is that when starting the slide show I can not see the
forward/backward buttons. Publishing a photo page with iWeb from a .me web photo gallery works without any error message, but still when starting the slideshow the navigation buttons are not displayed. Actually if you click on the place where the navigation buttons are supposed to be,
you can go picture forward/backward. Any idea ?

I am having the same issue, except I do not get any error messages when publishing to a folder. Clicking on the "index" file within the folder will open the photo page in both Safari and Firefox. Everything functions as designed except no forward/backward/pause buttons are visible below the slideshow. There are text box outlines with a question mark where these buttons are supposed to be located, and I can pause, advance or reverse slides. Eventually these question mark outlines disappear and stay disappeared.
The end result is there are no intuitive graphic indicators on the slide show to even suggest to the viewer that he/she has some control over the presentation. I don't believe I can add explanatory text boxes to the slide show to compensate for the missing icons. This lack of visible control elements in the slide show is a huge issue. I am reasonable sure the problem does not reside within my computer. I've also reviewed inspector control options for a photo page/slide show and haven't gotten any combination of check boxes to make a difference.
I'm beginning to think this may be an unexpected conflict that was contained within a recent software update. It might well be worth a close look at programming code by Apple technicians. In the meantime, can anyone offer a clue as to what might be going on?

Problems publishing my iweb to mobile me

HI, I apologise if anyone has answered this question before but I have not found a result which works for my problem. I have created a website via iweb. It seems to publish fine but when i go to my site after it publishes it, safari can not find my site. I am unable to click on the view site button (only directly after the upload when it asks me). For some reason, my site is not active?? I am logged into mobile me and using a trial account. I have an active gallery on mobile me but my site wont publish. It is frustrating me and I am not receiving a response from apple. Please please please can someone help me as I want to use iweb instead of other blog sites. Perhaps I should buy another domain? Would this work? Thank you

No, its not strange at all. When you set up a MobileMe account and publish a site from iWeb it publishes to your iDisk, which is your Apple server that host your site.
Your url for an iWeb published site to MobileMe will be http://web.me.com/username/sitename. You don't actually need the sitename if you only have one site, so as OT has said http://web.me.com/username.
No - reggie88.com is not your username, this is a domain name. www.reggie88.com is a domain name also, not a MobileMe username. Have you actually gone to a domain name registrar and registered a domain name? If you want to use a domain name with MobileMe, then you need to go and purchase one first from a domain name registrar.
No - iWeb does not tell you in iWeb that you username is www.reggie.com. The only way that iWeb will have this at the bottom, is if you have logged into your MobileMe account and gone to the Personal Domain name settings section and entered a personal domain into here. Log into your MobileMe account and check whether you have done this - this is the only reason why iWeb will display this.
Next question, do you actually own or have you purchased a domain name - reggie88.com? If you have, then you can use this domain with a MobileMe account, but there are other steps that you need to go through first to link the two.
In the meantime, find your site by entering the url http://web.me.com/username which in your case is probably going to be http://web.me.com/reggie88 and you should get to your site.

Nokia 6210 Problems with using Edge (Internet Conn...

I have a Nokia 6210 phone bought from an authorized Nokia Care Center in Delhi, India two weeks ago. The software version on the phone is 3.08 dated 11-June 2008. It also mentions custom version as 03.08.c00.01
I am an Airtel Prepaid customer in New Delhi, India and had been using Mobile Office service on my prepaid number for some time. It worked perfectly fine for my Nokia 6233. On my current Nokia 6210 the Internet connection works fine for the first time through the built in browser or though any other application (like Google Maps, Gmail etc) which required internet and displays the sign signifying that the edge connection is active.
The problem is that once I close the application the standby sign for Edge network is displayed as follows and no matter what I am unable to use the internet connection on the phone again until I do the following
Restart the phone (which definitely isn’t a good option)
Wait for around 8-10 minutes after which the Edge on hold sign disappears and is replaced by which means that the edge is available
I found this out accidentally, but if I press the keys *123# which I typically use for enquiring balance, the on hold sign goes away and is replaced by the Edge available sign. after which things work fine.
Not sure where the problem is. I really doubt it’s got to do something with Airtel as the same number worked perfectly fine with my previous Nokia phone in the same area. In addition my wife’s phone (again an Airtel prepaid number) is working great in the same area. So either this has got to do something with the handset or the compatibility of the handset with the Airtel, New Delhi.
I have tried various sets of setting from the following sources
The wizard in built in the handset
Getting the settings from the Nokia site
Getttng the settings from Airtel Customer Care
But with all of them I am facing the same set of problems.
Wanted to check if anybody out you have ever faced a similar problem with this phone or one in a simlar series?

I suggest that you don't make permanent coupling between devices. Looks like Nokia modem is more responsive when you need to manually accept every connection at the phone's end.

Problems publishing in Edge.

Similar Messages

Maybe you are looking for