Problems pulling data from Archive

I recently installed the latest version of Palm OS. Long before I did this, I had been Archiving my Date Book just in case there was a problem. Now that I have installed the new version it tells me that the Archive Files (.dba files) " are not the correct format or they are corrupt" . Any ideas?

Have a look at this page
http://www.dba-oracle.com/t_ora_01013_user_requested_cancel_of_current_operation.htm
The most common cause of ORA-01013 is timeouts. Timeouts can be a little more tricky to identify because they may not be specifically reported in connection with ORA-01013.
. If a timeout is causing your ORA-01013 error in a SQL pass-through query, the properties in the timeout parameter
should be altered to a higher value.
So did you try increasing the query timeout? The culprit could be network too
Satheesh
My Blog

Similar Messages

Problem pulling data from Microsoft Access into Excel

Using Office 2010 pro, Windows 7:
I'm trying to pull in data from a password protected Access Database into Excel but I am having all kinds of problems..
In Excel im using:-
Data Link Properties> "Provider"> MS Office 12.0 Access database Engine OLE DB Provider
"Data Source": the full path and filename to the access database
"Enter information to log onto your server" - "use NT integrated security" is greyed out so I select username "Admin" and password <the database password>.
When clicking on "Test connection" I get the following error message:
"The test connection failed because of an error in initializing provider. Cannot start your application. The workgroup information file is missing or opened exclusively by another user."
Any help would be very much appreciated!
With thanks, NECoder

a similar issue:
http://social.technet.microsoft.com/Forums/en-us/5779d18b-a41e-416e-9001-8bbc73670591/test-connection-failed-because-of-an-error-initializing-provider?forum=sqldataaccess

UNIQUE Problem in pulling DATA from DATA base table to internal table

Dear Experts,
I am new to ABAP. I have a very basic question but looks a quite puzzling one to me. Hemnce I am posting it here.
I am facing an unique problem in pulling data from database table and populating that data into internal table for further use.
The data in the database table "Zlt_mita" with fields M1 (Employee Name, Type: Char20) and M2 (Employee Code, Type Char7) are:
Plz refer the screenshot in the attached file:
My Code:
1) When I try to pull data from Dbase table by taking M2 as parameter.
     This code is succcessful and I am able to populate data in internal table it_dat.
TYPES: Begin Of ty_DAT,
                 M1   TYPE Zlt_mita-M1,
                 M2   TYPE ZLT_mita-M2,
             END OF ty_DAT.
DATA: it_dat        TYPE STANDARD TABLE OF ty_dat with header line,
          wa_dat      TYPE   ty_dat.
PARAMETERS: p_mitar    TYPE Zlt_Mita-M2.
SELECT           M1
                       M2
        FROM     ZLt_mita
        INTO       TABLE it_dat
        Where     M2 = p_mitar.
Loop at it_dat into wa_dat.
   WRITE:/2 wa_dat-M1,
              10 wa_dat-M2.
ENDLOOP.
2) When I try to pull data from Dbase table by taking M1 as parameter.
     This code is NOT succcessful and I am NOT able to populate data in internal table it_dat.
TYPES: Begin Of ty_DAT,
                 M1   TYPE Zlt_mita-M1,
                 M2   TYPE ZLT_mita-M2,
             END OF ty_DAT.
DATA: it_dat        TYPE STANDARD TABLE OF ty_dat with header line,
           wa_dat      TYPE   ty_dat.
PARAMETERS:    P_Mita    TYPE   ZLT_Mita-M1.
SELECT           M1
                       M2
        FROM     ZLt_mita
        INTO       TABLE it_dat
        Where     M1 = P_Mita.
Loop at it_dat into wa_dat.
   WRITE:/2 wa_dat-M1,
             10 wa_dat-M2.
ENDLOOP.
Why is this happening when both M1 and M2 are Type Character fields.
Looking forward for your replies.
Regards
Chandan Kumar

Hi Chandan ,
Database fetch is case sensitive ,So u need to give exact format in where condition.
Make your parameter and database in same case so that you need not worry about case sensitivity .
Check the lowecase check box in the domain .
Then declare your parameter
PARAMETERS:
P_Mita
TYPE   ZLT_Mita-M1 LOWER CASE .
You can do the vice versa also by unchecking lowercase and giving Upper case instead of lower in parameter declartion .
Regards ,
Juneed Manha

SSRS pulls data from ESSBASE cube, data not showing

Dear Experts,
We are connecting SSRS 2012 to Essbase 11.1.3 to pull data from the cube, and having some issues with some members data not showing in the query designer and report, while some have no problem. And we couldn't find a pattern on which members won't show. We are wondering if this is a known issue and if there is a way to solve the problem.
Thanks very much.
Grace

Hi ,
Check the following:-
1 Check whether you have made the joins properly.
2 Check data at multiprovider level .
3 is data available for reporting in both the cubes
Regards
Rahul

Pull data from a table in HTML format from external URL into a Servlet

How do I pull data from existing website html table into a Servlet?
I will need to pull the data into a servlet. So, the servelet will need to go to the URL and get the data and save them as variables.
I know I will need an array to store the data. I just dont know how to call the URL and have the servelet search the site for the <table> </table>.
I will later use this to save to a database.
Thanks
Edited by: DJMegabit on Apr 14, 2010 7:36 PM

Maybe give us more details about what exactly You'd like to achieve. I guess that there might be better solutions to the problem.

Error while pulling data from an Oracle database. ORA-01858: a non-numeric character was found where a numeric was expected

I'm trying to pull data from an Oracle database using SSIS. When I try to select a few fields from the source table, it returns the following error message:
    [OLE DB Source [47]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14.
    An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80040E14 Description: "ORA-01858: a non-numeric character was found where a numeric was expected".
    An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01858: a non-numeric character was found where a numeric was expected".
The source columns are a combination of numeric and texts, and I've also tried selecting one of them, which didn't work. I'm using the Oracle client 11.2.0.1, and it works fine with any other data sources I have connected to so far. How can I resolve this
error?

Hi H.James,
According to your description, the issue is a non-numeric character was found where a numeric was expected while pulling data from an Oracle database in SSIS.
Based on the error message, the issue should be you are comparing a number column to a non-number column in a query. Such as the query below (ConfID is a number, Sdate is a date):
where C.ConfID in (select C.Sdate
                   from Conference_C C
                   where C.Sdate < '1-July-12')
Besides, a default behavior for the Oracle OleDb Provider that change the NLS Date Format of the session to 'YYYY-MM-DD HH24:MI:SS can also cause the issue. For more details about this issue, please refer to the following blog:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2012/01/20/every-bug-is-a-microsoft-bug-until-proven-otherwise.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Best way to extract data from archived cube

Hello Experts,
Can anyone tell me best way to extract data from archived cube.
Basically I am trying to pull all the data from archived cube and then load it into another brand new infoprovider which is in different box.
Also I need to extract all the master data for all infoobjects.
I have two options in my mind:
1) Use open hub destination
or
2) Infoprovider>display data>select the fields and download the data.
Is it really possible to extract data using option (2) if records are too high and then load it into another infoprovider in new system.
Please suggest me the pros and cons for the two options.
Thanks for your time in advance.

Hello Reddy,
Thanks a lot for your quick reply.
Actually in my case I am trying to extract archived infocube data and then load it into new infoprovider which is in different system. If I have connectivity I can simply export data source from archived infocube and then reload into new infoprovider.
But there is no connectivity between those two systems (where archived cube is and new infoprovider) and so I am left with the two options I mentioned.
1) Use Open Hub
or
2) Extract data manually from infoprovider into excel.
Can anyone let me know which of the two options is the best and also I doubt on how to use excel in extracting data as excel have limit of no.of records 65536
Thanks
Edited by: saptrain on Mar 12, 2010 6:13 AM

Pulling data from oracle into sql server 2005

hi,
these days i am working on sql server 2005 on windows server 2008 64 bit.
and oracle 10g on 32 bit unix.
my problem is that when i am pulling data from oracle into sql server it shows me about *500-700 entries less*.
why this is happening? is it because 32 bit to 64bit? or is it because of different os?

Akki,
are you using snapshot or replication from MSSQL? I am doing the same thing, hope to share your experience.
I am using import/export from MGT studio and pull some data from Oracle database, I am working on how to update the changes on these tables pulled from Oracle.
Thanks,
-hank

How to use macro to pull data from custom infotype?

Hi all,
Is rp_provide_from_last p9004 space pn-begda pn-endda. works?
i am getting all zeros .
is using macros possible pull data from custom infotype? or only select?
Regards
sas
For LDB PNPCE
get peras:

Hi,
Try the following Macro it will solve out your problem,
DEFINE rp_provide_from_last.
rp_found = '0'.
clear: rp_tabix.
loop at &1.
    if &2 ne space.
      check &1-subty eq &2.
    endif.
    if &1-begda le &4 and &1-endda ge &4.
      rp_found = '1'.
      exit.
    endif.
    if &1-begda le &4 and &1-endda ge &3.
      rp_tabix = sy-tabix.
    endif.
endloop.
if rp_found eq '0'.
    if rp_tabix ne 0 .
      rp_found = '1'.
      read table &1 index rp_tabix.
    else.
      clear: &1.
    endif.
endif.
END-OF-DEFINITION.
rp_provide_from_last <p????> space <begda> <endda>.
Best Regards,
Faisal

How to pull data from oracle GL to planning

Hi all
Can one suggest me how to pull data from oracle GL in to hyperion planning(we are using hyperion planning 9.3 with limited licence for analytic services). i guess we can use HAL ..any thing else
any help is appreciable
regards
M.V

Hi
I appreciate for your response. Yep you are exactly right it is data only, but I do have a problem these people have their licence of limited version of Essbase.
Let me give you the information of their licence agreement.
The licence for the hyperion planning- sytem9 programs includes a limited use license for both the hyperion Essbase- system 9 and hyperion Financial reporting - system 9 programs. Such limited use license means that the hyperion Essbase- system 9 and Hyperion financial reporting -system 9 programs may only be used to access data from the Hyperion planning -system 9 program.
Specifically, the hyperion essbase- system 9 program cannot be used to create Essbase cubes that do not contain data used by the Hyperion planning- system 9 program and the Aggregate storage option component of the Hyperion Essbase - system 9 program may not be used.
1) what it(licence agreement) really means - can you install Essbase, if not how can you create dimensions dynamically using planning.
2) Is it possible without Essbase as far as I know its not possible
3) are we going to face any issues with this licence.
4) Is it possibe to pull data with planning
I appreciate if any one resolve this issue
regards
M.V

One report to pull data from SQL or DB2

Hi Guys,
First post here. I have scoured the internet using our good friend google for answers and have come up empty. I hope someone can help me here!
Some Info: Crystal XI R2, Visual Studio 2005, Ms SQL Server 2005, DB2, VB.NET
What I am trying to accomplish is using one report to pull data from either SQL 2005 or DB2.
The problem I get is if the report is configured to pull data from SQL 2005, I cannot change it using the code below to pull data from DB2. The SQL Report uses the Microsoft OLEDB Provider. The DB2 report uses the IBM DB2 UDB for iSeries IBMDA400 OLEDB provider. When I quickwatch the oCRTable logon information, it seems to retain the other database's info.
Any ideas?
My code:
    Private Sub LoadRpt(ByVal rpt As String)
        Try
            Dim strReport As String
            Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument
            Dim rpt As CrystalDecisions.CrystalReports.Engine.ReportDocument
            Dim oCRTable As CrystalDecisions.CrystalReports.Engine.Table
            Dim oCRConnectionInfo As New CrystalDecisions.Shared.ConnectionInfo()
            strRptNm = String.Format(".rpt", rpt )
            strReport = String.Format("\{1}", Server.MapPath("Reports"), rpt )
            crReportDocument.Load(rpr)
            '   check to make sure report is loaded; if not, then do nothing
            If crReportDocument.IsLoaded Then
                oCRConnectionInfo.DatabaseName = ConfigurationManager.AppSettings.Item("DataBase")
                oCRConnectionInfo.ServerName = ConfigurationManager.AppSettings.Item("Server")
                oCRConnectionInfo.UserID = ConfigurationManager.AppSettings.Item("Profile")
                oCRConnectionInfo.Password = ConfigurationManager.AppSettings.Item("Password")
                For Each oCRTable In crReportDocument.Database.Tables
                    oCRTable.LogOnInfo.ConnectionInfo = oCRConnectionInfo
                    oCRTable.ApplyLogOnInfo(oCRTable.LogOnInfo)
                    oCRTable.Location = oCRTable.Location
                Next
                For Each rpt In crReportDocument.Subreports()
                    For Each oCRTable In rpt.Database.Tables
                        oCRTable.LogOnInfo.ConnectionInfo = oCRConnectionInfo
                        oCRTable.ApplyLogOnInfo(oCRTable.LogOnInfo)
                        oCRTable.Location = oCRTable.Location
                    Next
                Next
            ... other code ...
            End If
        Catch ex As Exception
            ... other code ...
        End Try
    End Sub
Edited by: Mace Windu on Feb 7, 2009 7:55 AM
Edited by: Mace Windu on Feb 7, 2009 7:56 AM

David,
Your suggestion worked to near perfection. The only problem was that if I configured the datasource locations of the report and sub reports in CR to use the SQL ODBC, the .net program would successfully log in using the DB2 info but had a problem reading the data. If I configured the datasource locations of the report and subreports in CR to use the DB2 ODBC, everything worked! Thanks for the advice.
The force is strong with you.
Mace

JavaConsole Error: Problem reading data from server

HI All
We are getting this error on java console on a page:
Error: Problem reading data from Server - Java.Security.AccessControlException:access denied (java.util.PropertyPermission http.strictpostredirect Read)
In this page we are not firing a SQL Query of huge data.
Any suggestions on this why it is happening?
Thanks
Manisha

Manisha,
I think JVM(Java Virtual Machine) is trying to access something at network level and it cant able to find it.Or any new patches of java is installed.
Or may be due to IIS or Applet,Don't know exactly.
You can find some answers in below links:
http://java.sun.com/j2se/1.4.2/docs/api/java/security/AccessControlException.html
http://www.webdeveloper.com/forum/archive/index.php/t-46358.html
-Suresh

Delete data from archive server

Hello,
we have following question : How do you delete data from archive server which has passed the retention time and need to be removed from archive server.
Have you any ideas?
Thanks,
Stefan

Hi Planung,
For deletion of data SARA transaction is used. Also deletion indicator is required to set for the documents which you are not using. Use the bapi BAPI_DOCUMENT_DELETE for deleting the documents which are set with deletion indicator.
I hope this will resolve the query.
Regards,
Ravindra

Pulling data from table to a flat file

hi all,
Good day to all,
Is there any script which i can use for pulling data from tables to a flat file and then import that data to other DB's. Usage of db link is restricted. The db version is 10.2.0.4.
thanks,
baskar.l

Is there any script which i can use for pulling data from tables to a flat file and then import that data to other DB'sFlat file is adequate only from VARCHAR2, NUMBER, & DATA datatypes.
Other datatypes present a challenge within text file.
A more robust solution is to use export/import to move data between Oracle DBs.

Unable to connect to the server to pull data from mysql

Hello,
I am novice working with Flash Builder 4 and I just created a test application which runs well in my computer pulling data from Mysql using PHP and populating a datagrid. But when I transfered it to the my hosting provider failed. I have been doing some modifications to the gateway.php and amf.config.ini to solve some of the issues. Now the application try to run but doesn't populate the data in the datagrid. I included a tracking point in my data service file to read the connections variables, but they come up in blank. I highly appreciate any help. Here are my gateway.php, amf.config.ini and the data service.
gateway.php
<?php
ini_set("display_errors", 1);
$dir = dirname(__FILE__);
$webroot = $_SERVER['DOCUMENT_ROOT'];
$configfile = "$dir/amf_config.ini";
$fp = fopen("tracking.txt", "a");
fwrite($fp, "1-config file " . $configfile . "\r\n");
//default zend install directory
$zenddir = $webroot. '/ZendFramework/library';
//-$zenddir = $webroot;
fwrite($fp, "2-default zendir" . $zenddir . "\r\n");
//Load ini file and locate zend directory
if(file_exists($configfile)) {
     $arr=parse_ini_file($configfile,true);
     if(isset($arr['zend']['webroot'])){
          $webroot = $arr['zend']['webroot'];
          $zenddir = $webroot. '/ZendFramework/library';
     if(isset($arr['zend']['zend_path'])){
          $zenddir = $arr['zend']['zend_path'];
fwrite($fp, "3-after zendir" . $zenddir . "\r\n");
// Setup include path
//add zend directory to include path
set_include_path(get_include_path().PATH_SEPARATOR.$zenddir);
// Initialize Zend Framework loader
require_once 'Zend/Loader/Autoloader.php';
//-require_once 'Autoloader.php';
Zend_Loader_Autoloader::getInstance();
// Load configuration
$default_config = new Zend_Config(array("production" => false), true);
$default_config->merge(new Zend_Config_Ini($configfile, 'zendamf'));
$default_config->setReadOnly();
$amf = $default_config->amf;
fwrite($fp, "4- configfile" . $dafault_config["production"] . "\r\n");
// Store configuration in the registry
Zend_Registry::set("amf-config", $amf);
// Initialize AMF Server
$server = new Zend_Amf_Server();
$server->setProduction($amf->production);
if(isset($amf->directories)) {
     $dirs = $amf->directories->toArray();
     foreach($dirs as $dir) {
         // get the first character of the path.
         // If it does not start with slash then it implies that the path is relative to webroot. Else it will be treated as absolute path
         $length = strlen($dir);
         $firstChar = $dir;
         if($length >= 1)
              $firstChar = $dir[0];
         if($firstChar != "/"){
              // if the directory is ./ path then we add the webroot only.
              if($dir == "./"){
                   $server->addDirectory($webroot);
              }else{
                   $tempPath = $webroot . "/" . $dir;
                    $server->addDirectory($tempPath);
          }else{
                  $server->addDirectory($dir);
fwrite($fp, "5-temp path" . $tempPath . "=>" . "\r\n");
fwrite($fp, "******************************************" . "\r\n");
// Initialize introspector for non-production
if(!$amf->production) {
     $server->setClass('Zend_Amf_Adobe_Introspector', '', array("config" => $default_config, "server" => $server));
        $server->setClass('Zend_Amf_Adobe_DbInspector', '', array("config" => $default_config, "server" => $server));
// Handle request
echo $server->handle();
?>
amf.config.ini
[zend]
;set the absolute location path of webroot directory, example:
;Windows: C:\apache\www
;MAC/UNIX: /user/apache/www
;-webroot =c:/wamp/www/
webroot = /home/frutiexp/public_html
;set the absolute location path of zend installation directory, example:
;Windows: C:\apache\PHPFrameworks\ZendFramework
;MAC/UNIX: /user/apache/PHPFrameworks/ZendFramework
;zend_path = /home/frutiexp/public_html/ZendFramework
[zendamf]
amf.production = true
amf.directories[]=fb41/services
;amf.directories[]=./
CoursesService.php
<?php
* README for sample service
* This generated sample service contains functions that illustrate typical service operations.
* Use these functions as a starting point for creating your own service implementation. Modify the
* function signatures, references to the database, and implementation according to your needs.
* Delete the functions that you do not use.
* Save your changes and return to Flash Builder. In Flash Builder Data/Services View, refresh
* the service. Then drag service operations onto user interface components in Design View. For
* example, drag the getAllItems() operation onto a DataGrid.
* This code is for prototyping only.
* Authenticate the user prior to allowing them to call these methods. You can find more
* information at <link>
class CoursesService {
     var $username = "myusername";
     var $password = "mypassword"
     var $server = "localhost";
     var $port = "3306";
     var $databasename = "frutiexp_trainsur";
     var $tablename = "courses";
     var $connection;
      * The constructor initializes the connection to database. Everytime a request is
      * received by Zend AMF, an instance of the service class is created and then the
      * requested method is invoked.
     public function __construct() {
            $this->connection = mysqli_connect(
                                          $this->server,
                                          $this->username,
                                          $this->password,
                                          $this->databasename,
                                          $this->port
$fp = fopen("./tracking.txt", "a");
fwrite($fp, "1-service". $databasename . " " . $username . "\r\n");
fclose($fp);
          $this->throwExceptionOnError($this->connection);
      * Returns all the rows from the table.
      * Add authroization or any logical checks for secure access to your data
      * @return array
     public function getAllCourses() {
          $stmt = mysqli_prepare($this->connection, "SELECT * FROM $this->tablename");
          $this->throwExceptionOnError();
          mysqli_stmt_execute($stmt);
          $this->throwExceptionOnError();
          $rows = array();
          mysqli_stmt_bind_result($stmt, $row->cou_id, $row->cou_title, $row->cou_overview, $row->cou_objectives);
         while (mysqli_stmt_fetch($stmt)) {
           $rows[] = $row;
           $row = new stdClass();
           mysqli_stmt_bind_result($stmt, $row->cou_id, $row->cou_title, $row->cou_overview, $row->cou_objectives);
          mysqli_stmt_free_result($stmt);
         mysqli_close($this->connection);
         return $rows;
      * Returns the item corresponding to the value specified for the primary key.
      * Add authroization or any logical checks for secure access to your data
      * @return stdClass

Hello Jdesko,
Thank you for you prompt response. Yes, I have changed the connections variables in my dataservice ( I didn't post real values). You are right, after all I didn't make changes on the gateway.php except to add some tracking points. The one that I changed is the amf.config,ini. The application runs without any error exceptions, but don't populate the datagrid. According with the tracing is stoping just when establishing the connection to the database. Please let me know if you have any other clue. thanks

Problems pulling data from Archive

Similar Messages

Maybe you are looking for