Problems pulling up pdf files in RenWeb

I'm tring to pull up pdf files within the web interface "RenWeb." I've been able to pull up 2 of them but the rest wil not load. The screen is grey and says loading but never loads. Sometimes the ones I have been able to pull up will not pull up as well.

You might start looking for a new computer with windows 7 or 8 64 bit.
Not because windows xp is a bad operating system, but it's not supported by microsoft any longer and more and more software companies are dropping support for xp.
(even one of my favorite open source programs; Krita, dropped support for windows xp)
Plus, new programs seem to be more and more ram hungry and a 64 bit version of windows can make a world of difference.

Similar Messages

Problem with preview PDF files on Windows 7 32bit

Hello,
in my office I have a problem with preview PDF files on my computers. The files are allright, but if I select a file and click on preview mode after ~ 10sec operation system write something "Preview this file is corrupt for PDF Preview Handler wrong". On other 64bit computers with same programs the preview is work. I try uninstall all Adobe soft (Reader, Flash), clean all Adobe data from folders in root and in register, but it is not solve this problem. On Microsoft forums wrote me, that the problem is probably with AR plugin.
So, can someone help me?
Config PC:
Windows 7 32/64bit Pro
Intel i3, 4GB
Adobe Reader 11.0.5
Adobe Flash Player 15 ActiveX
Adobe Flash Player 15 plugin
Preview Handler Surrogate Host ver.: 6.1.7601.17514
Thank you for help.

I think I figured it out after reading other forums. Thanks!

Problems converting a pdf file to a word document using ExportPDF

I am having problems converting a pdf file to a word document (.docx) using ExportPDF. It is spends ages trying to upload the PDF file, but fails to do so. Should I just cancel my subscription?

I suspect that you are asking for help with CreatePDF. If so, you should post in
http://forums.adobe.com/community/createpdf
This is the Reader forum...

Problem with printing pdf file

hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank you

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

I'm having problems opening my pdf files. I'm running windows XP and have adobe reader XI (11.0.06)

I'm having problems opening my pdf files. I'm running wiondows Xp and have adobe reader XI(11.0.06) installed.

What kind of problems? What happens when you try? Any error messages?

Having a problem converting a PDF file to Words with Adobe's conversion program.

Having a problem converting a PDF file to Words with Adobe's conversion program.

See https://forums.adobe.com/docs/DOC-2412
If you need more help, please ask in https://forums.adobe.com/community/acrobatdotcom/

Having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

Hi George ,
Is it happening with all the PDF' or any specific one?
Could you please share the error message so that we can replicate at our end ?
Try repairing reader once and see if that fixes the issue.
Launch Reader>Navigate to Help>Repair Adobe Reader Installation
Regards
Sukrit Dhingra

Problem when loading pdf files from Shared Content

When I load pdf files from Shared Content, I got the following problem: "The selected document could not be retrieved, please try uploading the document again."
Anyone knows this?
Thank you very much in advanced.

I don't migrated the program, but installed it from the original installer,
i. e. I first installed Indesign from backup, and then uninstalled it and
reinstall clean from Adobe.
What a plug-in or utility converts page from InDesign to PDF?
2014-08-10 22:51 GMT+04:00 Peter Spier <[email protected]>:
problem with exporting PDF files from InDesign CS5 created by Peter
Spier <https://forums.adobe.com/people/P+Spier> in InDesign - View the
full discussion <https://forums.adobe.com/message/6627440#6627440>

Problem printing Online PDF file

Have a strange problem printing online PDF files. The printer prints all other documents ok - Word, Pages, PDF files that are stored on disk etc. However when i try and print a PDF file online - i.e. online job application form, the printer goes into melt down. It will only print part of the first page then stops. The drive wheel pushes the paper back and forth a few times then stops. I can print each page one at a time but won't let me print all at once.
Any ideas? It does this regardless of which computer I use (both mac's). Makes no difference if the printer is connected direct via USB or Airport.
Any ideas?
Colin.

What kind of printer is it? Is the software up to date? Is it possible to provide the URL of the page you are trying to print?

Problem reading attached PDF files



Hello.
At my work, we use JavaMail (version 1.4.1) in server
programs, processing mails with attached files from customers. Mostly it is
TIFF images, but it can also be PDF
files, and the attached files are extracted and saved for further processing.
Sometimes, we have a problem, reading attached PDF
files. The files get saved, but is of size 0 bytes. If I forward it, however,
using an Outlook client, the forwarded item can be read by our JavaMail program, and files saved OK.
I have tried to forward it using JavaMail, but I cannot
compose the mail parts, that fails, however - of the same reasons: I cannot
read the them in:-)
It looks like it's when the mail is send from a Mac.
Anyway, the part to read is of content type "APPLICATION/APPLEFILE" whereas when it's forwarded, it's content
type is "APPLICATION/OCTET-STREAM"
The way, I read the part, is to check if the part is an
instance of an InputStream, and then saving into a byte array, like this:
h5. Object
obj = part.getContent();
if (obj instanceof
InputStream) {
InputStream
inStream = part.getInputStream();
byte[]
buffer = new byte[BUFFER_SIZE];
int
bytesRead;
BufferedOutputStream
outBufStream = new BufferedOutputStream(new FileOutputStream(attFileName));
while
((bytesRead = inStream.read(buffer)) != -1)
outBufStream.write(buffer,
0, bytesRead);
inStream.close();
h5. outBufStream.close();
Problem
is that .read() method always returns -1 when content type Is APPLICATION/APPLEFILE,
so a file of 0 bytes are created.
Interesting is perhaps, that debugging shows me that the
part instance of the InputStream actually is a
com.sun.mail.util.BASE64DecoderStream when it fails, and a
com.sun.mail.util.QPDecoderStream
when it works OK.
So I have this idea, that I's a certain type of decoder
stream we're missing? We use Java 1.6.0 update 10 and JavaMail 1.4.1. and since
we use java 1.6 we use the JAF framework from that one, I guess?
Hope you guys can help?
Thanks in advance, Per Jensen
[email protected]

We have two (MS Exchange) servers (from trace log):
Microsoft Exchange IMAP4rev1-server version 5.5.2650.23
Microsoft Exchange Server 2003 IMAP4rev1 server version 6.5.7226.0
- the first one is the one, we're using here, but I have tried on the other, newer version too, and it didn't help either.
But I've found out a couple of interesting things:
1: Debugging shows me, that the part instance of the InputStream actually is a com.sun.mail.util.BASE64DecoderStream when it fails, and if I forward the mail via Outlook as described earlier, and it can be read OK, the part is a com.sun.mail.util.QPDecoderStream instance.
2: I can save the WHOLE message to a file, using message.getInputStream(), and when I opens the file I can find the individual attachments - as well as the bodytext, if any - as they are separated with the disposition, mimetype and filename fields, showed as plain text. And the attachments are showed as blocks of characters; I guess it's the ascii character representation of the bytes. Here's a snippet, note the first two sentences. They seemes to be added, somehow, when I dump the message to file(?):
<START OF DUMPED FILE>
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_000_01C9A8A2.19479FE4
Content-Type: text/plain;
     charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
(The body text here)
------_=_NextPart_000_01C9A8A2.19479FE4
Content-Type: application/applefile;
     name="first_attachment.pdf"
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
     filename="first_attachment.pdf"
AAUWAAACAAAAAAAAAAAAAAAAAAAAAAAAAAQAAAAIAAAASgAAABAAAAAJAAAAWgAAACAAAAADAAAA
egAAABAAAAABAAAAigAAI6IAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAA1NzE2NSBCTkhhdWcucGRmJVBERi0xLjMKJbe+raoKMSAwIG9iago8PAovVHlwZSAv
Q2F0YWxvZwovUGFnZXMgMiAwIFIKPj4KZW5kb2JqCjIgMCBvYmoKPDwKL1R5cGUgL1BhZ2VzCi9L
aWRzIFsgNCAwIFIgXQovQ291bnQgMQo+PgplbmRvYmoKMyAwIG9iago8PAovUHJvZHVjZXIgKEhh
...(and so on)
DMgMDAwMDAgbg0KMDAwMDAwNTM1NSAwMDAwMCBuDQowMDAwMDA2NTA5IDAwMDAwIG4NCjAwMDAw
MDc2NjUgMDAwMDAgbg0KdHJhaWxlcgo8PAovUm9vdCAxIDAgUgovSW5mbyAzIDAgUgovU2l6ZSAx
MQo+PgpzdGFydHhyZWYKODgyNAolJUVPRgo=
------_=_NextPart_000_01C9A8A2.19479FE4
Content-Type: application/applefile;
     name="second_attachment.pdf"
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
     filename="second_attachment.pdf"
AAUWAAACAAAAAAAAAAAAAAAAAAAAAAAAAAQAAAAIAAAASgAAABAAAAAJAAAAWgAAACAAAAADAAAA
egAAABAAAAABAAAAigAAI9wAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAA1NzE4MSBCTkhhdWcucGRmJVBERi0xLjMKJbe+raoKMSAwIG9iago8PAovVHlwZSAv
Q2F0YWxvZwovUGFnZXMgMiAwIFIKPj4KZW5kb2JqCjIgMCBvYmoKPDwKL1R5cGUgL1BhZ2VzCi9L
...(and so on)
<END OF DUMPED FILE>I understand that it's base64 encoded and must be decoded, and I have tried to copy/paste the blocks separately, run them through the com.sun.mail.util.BASE64DecoderStream, and saving them as PDF files, which works fine(!).
As the solution seems to be painfull: Parse the mail to find where the attachments starts and stops and saving them as files, I hope you guys can send me on the right track?
PS: The trace log when dumping the file shows everything OK, I think. Here's a bit of the log at the end of dumping the message:
(...)MTUgMDAwMDAgbg0KMDAwMDAwNTg2NyAwMDAwMCBuDQowMDAwMDA3MDIxIDAwMDAwIG4NCjAwMDAw
MDgxNzcgMDAwMDAgbg0KdHJhaWxlcgo8PAovUm9vdCAxIDAgUgovSW5mbyAzIDAgUgovU2l6ZSAx
MQo+PgpzdGFydHhyZWYKOTMzNgolJUVPRgo=
------_=_NextPart_000_01C9A8A2.19479FE4--
A10 OK FETCH fuldført.
A11 FETCH 1 (BODY[TEXT]<40336.16384>)
* 1 FETCH (BODY[TEXT]<40336> {0}
20/03-09 15:18:21,445 3 Done, writing bytes to ByteArrayOutputStream. Size: 40336 bytes (..common.mail.MailUtil.dumpMessageToFile.dumpMessageToFile)
20/03-09 15:18:21,445 3 Done, writing ByteArrayOutputStream to file. (..common.mail.MailUtil.dumpMessageToFile.dumpMessageToFile)
A11 OK FETCH fuldført.

Problems with some PDF files

Hi,
I have problems with some PDF files. After clicking on link to the file Safari shows me insted of normal document (which is working on Windows) hashes, numbers etc like it was a problem with coding or something. First I was using Preview, I though that maybe installing Acrobat Reader with plugins will solve the problem, but ofcourse it didn't. Did somebody has this same problem?

Back up all data.
Please triple-click anywhere in the line below on this page to select it:
defaults delete -app Safari WebKitOmitPDFSupport
Copy the selected text to the Clipboard by pressing the key combination command-C.
Quit Safari. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign (“$”) to appear below what you entered. You can then quit Terminal. Test.

Problems when reading pdf files

I use windows 7, and also have available Adobe Reader 5 and Adobe Reader X, but i receive some problems when reading pdf files. What can I do???

Reader 5 is not Windows Compatible. Two different versions of the same computer can cause all sorts of problems. Remove all Acrobat and/or Reader software then re-install Reader X.

Problems reading generated pdf-files

Hi all,
I have problems reading generated pdf-files from
Report Builder 6.0.8.11.3
An error-message occurs when opening the pdf with
Adobe Acrobat 5.0.1:
... problem 110 and after moving in an empty pdf-document
the messages:
- too few operands
- an unrecognized token
I think the solution must be very simple, but the docu and
other info resources provide nothing aboutthis issue.
Greetings,
Bernhard

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by the oracle reports team:
hello,
there are no known problems with reading reports PDFs with later Acrobat Readers. maybe your file is somehow corrupt.
regards,
the oracle reports team<HR></BLOCKQUOTE>
I had to install a local printer, the network printer is not appropriate here. After that, everything is fine :-)),
Greetings,
Bernhard
null

Adobe Reader 10 problem with opening pdf files

Ever since I downloaded and installed Adobe Reader 10, I have been unable to open .pdf files from the Internet. When
I try to download them, I only the get the option of saving the file, not opening it. Any help would be appreciated. Thanks!

We had similar problems with both the upgrade to 9.4.2 and 10.0.1. We would either get the download/save screen or a black screen would appear and eventually error out and freeze up the machine when we tried to hit pages that loaded pdfs stored in Oracle. We found the pdfs would load when using Chrome or Firefox.
We're running winXP SP3 and mainly have users using IE 7 and IE 8. We were eventually able to solve the problem by doing the following:
Implementing the code fix outlined in this thread (Response.charset = null;) in the page that pulled pdfs from Oracle: http://forums.adobe.com/message/3476821
Uninstalling and reinstalling the base version of Reader (9.4.0 or X.0) from users' machines that had gone through the update from 9.x to X.x
Rebooting the machine after each uninstall or install
Updating the Reader to either 9.4.2 or 10.0.1
Now we have users who can successfully load the pdfs from Oracle who are running either 9.4.2 or 10.0.1.
Hope this helps!

I have a problem with uploading pdf files. This was raised in April by Mariano and the solution given - but the link to the solution does not work. How do I get to the solution?

I have just come across this problem uploading pdf files on FF 3.6. Mariano posted this same problem on 5 Apr ( I found his post after a Google search as a search of this Forum gave no result). It is shown as "solved" but when I click on the Show Solution link it just loops back to the question.
How do I get to see the solution?

The following line tells me that this is not a template file, but a document created from a template called index.dwt
<html xmlns="http://www.w3.org/1999/xhtml">
This means that you saved a child document as a template file at some stage.
If you go to Modify->Templates->Detach from Template, you can remove the template structure from your document. All you then need to do is to re-save the document as a template.

Problems pulling up pdf files in RenWeb

Similar Messages

Maybe you are looking for