Problems Re-installing Desktop Manager

New to the board here and have a question maybe someone can shed some light on for me.
I'm running Vista Home Premium on my PC. I had problems with the BB Desktop Manager software so I decided to uninstall if and do a fresh install. Somehow, there were two identical versions installed on my laptop, and I could not uninstall either one. I had to download Windows Install Cleanup to delete the first copy. The second copy did not show up in my programs list on the Control Panel, but there was still a shortcut on my desktop. Clicking the desktop icon opened the second copy of BBDM! I found it installed under a folder other than Programs. I had to drag it to the recycle bin to get rid of it, as all un-instraller software was unable to find it.
Now...I went to download and install BBDM again and it will not install! I have tried the CD and web download versions. No matter what I do, I get the following message on the BB InstallShield Wizard shortly after the install process begins:
InstallShield Wizard Completed
The wizard was interrupted before BlackBrry Desktop Software could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again. Click finish to exit the wizard.
I have tried numerous times to get the software to install, but no go. Any ideas on how to get the install to work? I appreciate any help you can give me.

Similar Messages

Problem BlackBerry 8820 and Desktop Manager

Hy i conect my BB but in the desktop manager in the pin area dont aperece my pin number aprece none and push this and push detec my pin an tell me the pin detected but in the main menu aperece none againg , what it the problem ?

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB03490 Internal Error 2738. Could not access VBscript appears when installing BlackBerry Desktop Manager
Normally, that is an install error rather than an uninstall error, but hopefully the remedies it contains will still be useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Trouble with new install od Desktop Manager 4.2

I'm new to Forums but I can't seem to fine help anywhere else! I have had a Blackberry 8100 for a while. All worked well with my old Pentium 4. I have moved ovet to an i7 processor and Windows 7. I have read a few messages on here and have corrected the USB power problem. I have downloaded and installed Drivers DM4.5_B13 and now the connection is seen by DM. I have a problem now that some of the program is in English and some is in another language! I'm guessing it's Arabic or similar. Things like Microsoft Outlook Takvim and in the fields section one side says Title and the other says Unvan or Address on one is Eposta Adres.
Can anyone help me?
D.O.
Solved!
Go to Solution.

If you were successfully able to install BlackBerry Desktop Manager 4.2, I would go through the clean reload process as shown here:
http://www.blackberry.com/btsc/KB11320
This will make sure any old files are removed from your computer before installing the new one.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Failed install of Desktop Manager 4.2 sp2

I get this error message when attempting to install the desktop manager software 4.2 sp2
Error 1720. There is a problem with this Windows Installer
package. A script required for this install to complete could not
be run. Contact your support personnel or package vendor.
Custom action RIM_InstallOptionalITAdminFiles script error
-2146827859, Microsoft VBScript runtime error: ActiveX
component can't create object: 'Scripting.FileSystemObject' L...
Any suggestions?
I downloaded the installer directly from RIM's site.
I have also tried the 4.3 version with no luck and getting the same error message
Thanks in advance!

Do you have administrator rights on the computer you're installing to?
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Unable to install Blackberry Desktop Manager on Windows 8

Hi Team,
Please help as I am trying to install Blackberry Desktop Software for my Blackberry Bold 4 (9900) phone,
I did not get any software CD with the phone hence downloaded the software from
http://us.blackberry.com/software/desktop.html
and when I try to install I get the following error,
I do not understand this issue can any one help me on this.
Windows ® Installer. V 5.0.9200.16384
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
</package | /i> <Product.msi>
Installs or configures a product
/a <Product.msi>
Administrative install - Installs a product on the network
/j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
Advertises a product - m to all users, u to current user
</uninstall | /x> <Product.msi | ProductCode>
Uninstalls the product
Display Options
/quiet
Quiet mode, no user interaction
/passive
Unattended mode - progress bar only
/q[n|b|r|f]
Sets user interface level
n - No UI
b - Basic UI
r - Reduced UI
f - Full UI (default)
/help
Help information
Restart Options
/norestart
Do not restart after the installation is complete
/promptrestart
Prompts the user for restart if necessary
/forcerestart
Always restart the computer after installation
Logging Options
/l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
i - Status messages
w - Nonfatal warnings
e - All error messages
a - Start up of actions
r - Action-specific records
u - User requests
c - Initial UI parameters
m - Out-of-memory or fatal exit information
o - Out-of-disk-space messages
p - Terminal properties
v - Verbose output
x - Extra debugging information
+ - Append to existing log file
! - Flush each line to the log
* - Log all information, except for v and x options
/log <LogFile>
Equivalent of /l* <LogFile>
Update Options
/update <Update1.msp>[;Update2.msp]
Applies update(s)
/uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
Remove update(s) for a product
Repair Options
/f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
Repairs a product
p - only if file is missing
o - if file is missing or an older version is installed (default)
e - if file is missing or an equal or older version is installed
d - if file is missing or a different version is installed
c - if file is missing or checksum does not match the calculated value
a - forces all files to be reinstalled
u - all required user-specific registry entries (default)
m - all required computer-specific registry entries (default)
s - all existing shortcuts (default)
v - runs from source and recaches local package
Setting Public Properties
[PROPERTY=PropertyValue]
Consult the Windows ® Installer SDK for additional documentation on the
command line syntax.
Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Independent JPEG Group.

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB19300 Windows Installer command line parameters information box appears when attempting to install BlackBerry Desktop Manager
Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Installation problems after downloading BB Desktop Manager

All worked perfect, until an automatic update from version 5.0. to 5.0.1. messed everything up, perhaps by the user's fault...
[1] update worked just jfine
[2] problem started when an message interfered asking for a resource ..8310.msi - file
[3] I finally decided to uninstall the BB Desktop Software altogether with an uninstaller software [YU]
[4] I downloaded 500_b028_english.exe
[5] after unpacking the software with winzip the Windows installer is interrupted
[6] The Blackberry Desktop Software Installation Wizard tells me: "the wizard was interrupted before Blackberry Desktop Software could be completely installed...Your sysyem has not been modified. To complete installation at another time, please run setup again.
[7] bad news: this process repeats and interrupts always at the same point in the same manner
[8] consequently I have NO Blackberry desktop software any more at all running ....
Please, help is URGEMTLY needed .... Thx in advance, Wolfgang

Hi and Welcome to the Forums!
I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
3) Get a fresh download of the RIM DTM software:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Choose the version that is newest (5.0.1 is current) and (if applicable) compatible with your PIM (if you are synchornizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
7) Start the organizer configuration over:
KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem With Newly Downloaded Desktop Manager Multi-Language v.4.6.0 With Media Manager

I just updated my desktop manager software this afternoon with the newer version that's in my subject line. The backup/restore feature works fine, but when I try to open the media manager, it opens, says no device is connected (when it is), and then gives me a pop-up message saying that an error has occurred (doesn't say what error specifically), and that the program needs to be restarted. I have tried it numerous times, and it always gives the same error message. Any ideas?
FYI, I have a Blackberry Pearl 8130, and am on the Verizon network.
Message Edited by stang210 on 11-14-2008 04:11 PM

First download the latest USB BB drivers from the following link"
Download Software
Perform the clean install of 4.5 without MM from here
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
This will eliminate MM from the problem and give you a fresh 4.5 and new USB drivers.
Please let me know if this helps!
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Error 1723 - Long time loyal Blackberry TOUR user - cannot install recent desktop manager

I cannot install the latest desktop manager on Windows 7. I have used this phone for YEARS and also syncd fine. Now I am dead in the water. The latest install package needs TO BE FIXED. Well into the installation I get the following message:
"Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. ActionRepairRimUsbDriverNT.07D232B6_7904_4970_8B22_8F…"
I have resisted the urge to "upgrade" to the popular newer smart phones from other companies, but I will have to leave Blackberry forever if this problem is not fixable (fixed) within the next few days.
Please help.
Mike B

Hi and Welcome to the Community!
Ramgopal wrote:
Check this url..
https://swdownloads.blackberry.com/Downloads/entry.do?code=15CF76466B97264765356FCC56D801D1
Select your Blackberry Model - Your Service Provider.- Verify the Blackberry Desktop Software, which displays and download the latest related to your model.... Those are specifically suitable for your blackberry model... Hope this help..
Actually, not quite...the issue for the OP was the Desktop Software, the link you provided is for Device Software. Indeed, the full portal for Device Software is thus:
http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html
There is only one version of Desktop Software, while there are hundreds of versions of Device Software. The Desktop Software, installed to the PC first, followed by installation to the PC of the specific Device Software, is the best way to ensure proper functionality between the PC and the device. However, as with all technology, there is no 100% guarantee.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Curve 8310 Problems Syncing Outlook Calendar & Desktop Manager Freezing

Hi: I recently bought a Curve 8310. It has Desktop Manager version 4.2.2.14; my laptop has Vista Home Premium and I use Outlook 2007.
Just a day or two ago Desktop Manager started crashing while syncing Outlook Calendar. It stops at Calendar entry 76 and then freezes. From checking the Technical Solution Center I understand the problem may be a corrupt Calendar entry. Dealing with this apparently involves going into Configure Synchronization but Desktop Manager won't let me do this. If I start it when the phone is connected to my laptop it doesn't register the connection and often freezes. If I start it, then connect the phone, and stop the synchronization process before it crashes Manager, clicking on any of the Desktop Manager ikons, including Synchronize, doesn't have any effect. I've tried reinstalling Desktop Manager from the CD supplied by my phone provider but it's made no difference.
I'd be grateful for any advice; Before this problem developed I was really enjoying my BlackBurry.

Hi,
First we need to do a clean reinstall of the software to makes sure all registry and files have been completely removed:
Link 1.
Then we need too reinstall the 4.2 software, taking into account the Vista considerations for install:
Link 2
After install reboot the PC, start DM, Pull the battery while the device is ON, replace after a minute,
Let the device reboot 1-3 min, Plug the BB into the USB cable, Go to synchronization options and rest the options to only
Synch the calendar, sync for two way, select no other programs. Start the sync process.
Please let us know the results,
Thanks,
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub...
http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=10906&jump=true
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Problems Connecting Device To Desktop Manager and Apploader.exe

Just got a new BB8900 last Friday. On Monday, I encountered a Reload Software: 552 error code and after checking online forums for options on how to fix I ultimately had to reinstall the operating system and reinstall new apps that weren't archived by the reinstall process. Because I feared getting this error again whenever I rebooted the device, I immediately made backups every hour as I was reconfiguring the device and adding back my apps.
Today I was going to do another backup for good measure and once I connected my Blackberry to the computer with Desktop Manager running, Desktop Manager crashed and gave me the following error:
Problem signature:
Problem Event Name: APPCRASH
Application Name: DesktopMgr.exe
Application Version: 5.0.0.11
Application Timestamp: 4a4bd539
Fault Module Name: DesktopMgr.exe
Fault Module Version: 5.0.0.11
Fault Module Timestamp: 4a4bd539
Exception Code: c0000005
Exception Offset: 000d68f5
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional Information 1: c4a7
Additional Information 2: 473b2e845affd1758ca8e66121386d63
Additional Information 3: 83e8
Additional Information 4: 72466a8a5092651f7fe609f9ec3f3489
I then tried the APPLOADER.EXE program locating in program files/common files/research in motion/apploader. I had used this program yesterday to try to delete applications 1 by 1 with the hope that one application was causing the 552 error. Now for some reason this program also is having a problem noting the following in the error log file:
Read from location 1010fffc caused an access violation.
I've looked through multiple forums and haven't found a solution. What I can tell you is this:
1) The phone is working fine but I fear rebooting the phone and getting another 552 error (there were two apps deleted that will be fully deleted on reboot). Would hope everything is fine but I've had two of these 552 errors within 24 and the second one came without any warning. If I get this error there is no way to get to my backup since I can't connect to DM without it crashing.
2) It doesn't appear to be a sync issue but I deleted the Intellisync folder anyway and it didn't fix the problem.
3) Have rebooted my machine with no change to problem.
4) Have reinstalled DM Version 5 (this time without the Roxio Media software) with no change to problem.
5) Because I now get an error when connecting to DM and trying to run apploader.exe, there appears to be a setting on my phone that might be causing the problems (I have no idea what it may be but the APPLOADER program notes a location violation so maybe the Blackberry software is confused about where to find my Apps?)
6) The BlackBerry device manager works fine and notes my device and applicable serial number.
After my last backup yesterday I probably only installed 3-4 other apps that I had lost and organized/moved folders around on the phone. So getting this problem so soon after everything was working fine is mindboggling.
Solved!
Go to Solution.

Another Update: I seemed to have found the problem. While RIM support recommended I do a device wipe I pushed back since the rest of the phone functionality seemed to work fine. I opted to begin removing applications from the phone one by one and then trying to connect to Desktop Manager.
Once I removed the ZDNet Tech News For IT Professionals and rebooted the phone, I was able to connect and do a backup. I'm sure this app works fine for almost everyone else, but for some unknown reason (maybe it conflicts with another app on my phone), Desktop Manager did not like it and shut down. I initially reinstalled it again and was able to do another backup but an hour later Desktop Manager shut down again (perhaps in doing an update on news it creates a conflict with Desktop Manager).
Anyways summary of learnings since my issue seemed to be somewhat uniqueCurve 8900)
1) If Desktop Manager shuts down and you've tried other solutions on forums such as deleting the Intellisync folder and reinstalling Desktop Manager, try deleting applications 1 by 1 and rebooting the phone before trying to connect again to Desktop Manager.
2) If you have had this problem, do frequent backups and keep track of what you add to your phone so in case there's a problem you know the most recent apps to remove (in my case I couldn't get to my latest backup since DM would shut down with the app conflict).
3) Only consider a device wipe if you have exhausted your apps removal testing. Apps which came on your phone which note the vendor in the About section of the app as RIM should be fine. Also while apps on AppWorld are being offered by BlackBerry there is no certainty that they will work on your phone.

Installing Blackberry Desktop Manager Software

Hi,
I'm trying to install the Blackberry Desktop Manager 4.0 Sp1 software
onto a few PC's.
Once I've customised the setup.ini file and run "setup.exe /s" from the
local drive (or network drive), the program setup installs the software
correctly.
However, when creating a Zen App object and inserting the following in
the "Run Options" tab, all I get is the MSIEXEC options screen (same as
running msiexec.exe /?)
Path to File:
C:\Setup\Blackberry_Desktop_4-0_Sp1\Blackberry_DM_4.0Sp1.exe /s
Working Directory: C:\Setup\Blackberry_Desktop_4-0_Sp1\
Any idea why the setup works when executing from Windows Explorer, but
fails when executing from Zen App objects?
Thanks for the input...

Hi Anders,
Thanks for the reply.
Yes, I definitely selected the option "A Simple Application (No
..AOT/.AXT.MSI file)"
It's worth mentioning that the setup.exe file calls an MSI file called
"BlackBerry Desktop Software.msi".
That appears to be done via the setup.ini file. See below.
[Info]
Name=INTL
Version=1.00.000
DiskSpace=8000 ;DiskSpace requirement in KB
[Startup]
CmdLine=/l*v %TEMP%\BB_DM.log
SuppressWrongOS=N
ScriptDriven=2
ScriptVer=9.0.0.333
DotNetOptionalInstallIfSilent=N
OnUpgrade=1
RequireExactLangMatch=0404,0804
Product=BlackBerry Desktop Software
PackageName=BlackBerry Desktop Software.msi
MsiVersion=2.0.2600.0
EnableLangDlg=Y
DoMaintenance=N
ProductCode={60041461-D167-4796-AF92-3AEF8C329811}
ProductVersion=4.0.1.12
SuppressReboot=Y
PackageCode={563D0473-9C7F-466A-BF53-6680D3D2773F}
[SupportOS]
Win95=1
Win98=1
WinME=1
WinNT4=1
Win2K=1
[Win95]
MajorVer=4
MinorVer=0
MinorVerMax=1
BuildNo=950
PlatformId=1
[Win98]
MajorVer=4
MinorVer=10
MinorVerMax=11
BuildNo=1998
PlatformId=1
[WinME]
MajorVer=4
MinorVer=90
MinorVerMax=91
BuildNo=3000
PlatformId=1
[WinNT4]
MajorVer=4
MinorVer=0
MinorVerMax=1
BuildNo=1381
PlatformId=2
ServicePack=1536
[Win2K]
MajorVer=5
MinorVer=0
MinorVerMax=1
BuildNo=2195
PlatformId=2
[Languages]
count=10
default=409
key0=405
key1=407
key2=409
key3=40a
key4=40c
key5=40e
key6=410
key7=415
key8=416
key9=804
[BlackBerry Desktop Software.msi]
Type=0
Location=BlackBerry Desktop Software.msi
[Setup.bmp]
0=setup.bmp
Type=0
[instmsiw.exe]
Type=0
Location=instmsiw.exe
[instmsia.exe]
Type=0
Location=instmsia.exe
[ISScript.msi]
Type=0
Location=ISScript9.Msi
[Validation]
CountryList=UK/GUERNSEY,
[INSTALL_OPTIONS]
COUNTRY = UK/Guernsey
SETUPTYPE = Enterprise
MAILSERVER = Exchange
REDIRECTOR = Enterprise
USERS = AllUsers
SHORTCUTSTARTUP = True
SHORTCUTDESKTOP = True
UNINSTALLEXISTINGHANDHELDS = FALSE
SUPPRESSREBOOT = True
Anders Gustafsson wrote:
> Steven Bellamy,
>> However, when creating a Zen App object
>>
> You did select "simple" and not "msi" when creating the object, right?
>
> - Anders Gustafsson, Engineer, CNE6, ASE
> NSC Volunteer Sysop
> Pedago, The Aaland Islands (N60 E20)
>
> Novell does not monitor these forums officially.
> Enhancement requests for all Novell products may be made at
> http://support.novell.com/enhancement
>
> Using VA 5.51 build 315 on Windows 2000 build 2195
>

Is device software installed when desktop manager is installed?

If I use the BlackBerry User Tools CD that is supplied with a new BlackBerry device (81x0, 83x0, 9000 etc) to install the BlackBerry Desktop Manager will it automatically install the relevant device software at the same time?
If not do I have to go to my service provider and download the latest available device software and install it separately?
Thanks
Matthew

Hi and welcome to the forums!
The desktop software that you installed does not have the device software loaded.
You are correct go to your carriers website and download the latest OS for your exact
model phone. Select the file and save it to a directory on the PC, rather than run it from
the site. I use a directory c:\downloads. Then execute the file from there. It will place
the device OS in the proper directory for the desktop software to recognize it.
You can down load the detailed manual for your desktop software from the link attached.
Thanks,
Bifocals
http://na.blackberry.com/eng/support/docs/categories/?userType=1&category=BlackBerry+Desktop+Softwar...
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Can't Install Blackberry Desktop Manager - error 1303

Trying to install desktop manager and I get error message "Error 1303. The installer has insufficient privileges to acces this directory: C:\Program Files\Research In Motion\Blackberry\1003. The installation cannot continue. Log on as an administrator or contact your system administrator."
I am running Windows 7, Home Premium, SP1.
Any ideas please? I am the administrator.

Hi and Welcome to the Community!
I can find no formal reference to that error...perhaps you may have better luck searching:
http://btsc.webapps.blackberry.com/btsc/microsites/microsite.do
Otherwise, I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
You may need to use the actual administrator account or an account with admin rights, and/or use the Run As Administrator option.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem in Installing BB Desktop Software V6

Hi,
I am facing problem in installing desktop software on my vista despite all the attempts.
The error log I am getting is -
Fault bucket 2040106933, type 5Event Name: CLR20r3Response: NoneCab Id: 0
Problem signature1: rim.desktop.exeP2: 6.1.0.35P3: 4dee095aP4: mscorlibP5: 2.0.0.0P6: 4bf4c743P7: 1c89P8: bP9: ExceptionP10:
Attached files:C:\Users\shiva\AppData\Local\Temp\WERF4B4.tmp.version.txt
These files may be available here:C:\Users\shiva\AppData\Local\Microsoft\Windows\WER\ReportArchive\Report075c1280
Kindly help as my I need to sync and do other updates after installation.
Regards
Prashant

Hi,
it seems to be the same problem as I have:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Desktop-Software-610-b034-crash-after...
No solution until now
Guido

Problem while installing discoverer desktop edition

HI
I find few error messages while installing discoverer desktop edition..
When i give oracle home as
name:OracleHome92
Location: DiscovererDesk
it gives me a error
" oracle discoverer doesnot support multiple installations thus it cannot be installed on oracleHome92.It can only be installed on 'OraHome92'"
When i give oracle home as
name:OraHome92
It automatically takes my 9i oracle home path i.e E:\oracle\ora92 and gives me a error like
"The location specified 'E:\Oracle\ora92', is already used an oracle home for an
'Oracle 82 beta'.It cann't be used as an oracle home for nt."
I have oracle 9i and form6i,report 6i installed in my system.
Please suggest me ..
Regards,
Satya

Hi
The easiest way to get a fully working TNSNAMES in a version 4 environment is to use the Net 8 Configuration utility.
Here's a workflow:
1. From the Start button, select Start | Oracle for Windows NT | Oracle Net8 Easy Config
2. When it starts, check Add New Service and in the little box to the right type the name by which you want this connection to be known
3. Click the Next button
4. Select TCP/IP (Internet Protocol) and click the Next button
5. Enter the fully qualified domain name or IP address of the server that contains the database
6. In Port, enter the port number - it defaults to 1521
7. Click the Next button
8.In Database SID enter the name of the database, then click the Next button
9.Click the Test Service button
10. Provide a username and password for an account on the database, then click the Test button
11. If you see: Connecting.... The test did not succeed you got the username/password combination wrong or some other part of the setup
12. When you see: Connecting.... The connection test was successful click the Done button
13. Click the Next button
14. Click the Finish button
You should now have a valid TNSNAMES connection for use by Discoverer 4
Best wishes
Michael

Problems Re-install​ing Desktop Manager

Similar Messages

Maybe you are looking for

Problems Re-installing Desktop Manager