Problems re-sending emails with attachments
I am using Mail 7,0 with Mavericks.
I am having problems resending emails. When I resend an email with one or more attached files, then I am having a lot of problems because the receiver gets everything scrambled!!, the body text is received as an attachment and all the images or logos included in my signautre are also received as an attachment.
I would thank very much if someone has had the same problem and can help me to solve the problem.
Thank you!!!
José Ignacio
Which antivirus software do you run on your computer? Are there any errors posting? Have you shut off any email firewalls temporarily to attempt to isolate your issue? Do you have outlook 2003 on more than 1 pc in your home? Have your tried to attach a small text file and send it to see if that goes thru successfully?
Joe D
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.Follow us on Twitter™!
Similar Messages
-
Outlook 2010 wont send emails with attachments
Hello
I was starting to write the question when we found out what the problem was. So I thought I would share our resolution in here, in case someone fall in the same issue.
One of my user with Outlook 2010 cannot send emails with attachments of some size. +-50 kb files works fine.
But when we try a file of 1mb, the mail goes in the Outbox, Exchange status swith from Connected to Disconnected and the email stay there.
The user is in a remote location, connected through VPN with the network where the Exchange 2013 server is
Here is what I did:
1. Re-create Outlook profile: wont work
2. Re-create Windows profile: wont work
3. Check ip settings: fine
4. Try in OWA: wont work
5. Look at Exchange settings for outgoing email size: 10mb
6. Load my user's Outlook profile on another LAN: works fine
That last point made me thought about a potential problem on the remote user's lan. So I did
7. Check VPN config between the remote site and IT site: fine
After googling the problem, I found that website (http://community.spiceworks.com/topic/396793-outlook-2010-client-suddenly-showing-disconnected-from-2013-exchange-server) that suggest to change the DNS setting on the client. However, the DHCP of my remote
user was the router itself, which is giving a DC as primary DNS, and ISP DNS as secondary. I changed the secondary DNS for another DC in our organization, and guess what? Voila! Problem is gone!
Thinking about it that make not much sense, as the primary DNS is always up the secondary shouldn't be queried. But that's what resolved our problem.
Hope it helps someone!
MartinHi Martin,
Thanks for your sharing:)
If you have any question about Microsoft Office, welcome to contact us and feel free to post your issue on Office forum.
Regards,
Winnie Liang
TechNet Community Support -
Cant send emails with attachments
All of a sudden I cant send emails with attachments from my iphone or iPad.
Has anyone else had similar issues?
I have deleted and reset the accounts up and also tried different devices all with the same problem.Please find the trace below . Also I am able to browse the share but haven't tried writing a test app.
javax.mail.MessagingException: IOException while sending message
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:595)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at SendEmail.sendMail(SendEmail.java:66)
at FetchDetails.fetchResultSet(FetchDetails.java:69)
at FetchDetails.<init>(FetchDetails.java:36)
at Index.main(Index.java:3)
Caused by: java.io.FileNotFoundException: \xxx.xxx.xx.xxx\dinesh\dialog.gif (The
system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:103)
at javax.activation.FileDataSource.getInputStream(FileDataSource.java:80
at javax.activation.DataHandler.writeTo(DataHandler.java:287)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1248)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:747)
at javax.mail.internet.MimeMultipart.writeTo(MimeMultipart.java:361)
at com.sun.mail.handlers.multipart_mixed.writeTo(multipart_mixed.java:85
at javax.activation.ObjectDataContentHandler.writeTo(DataHandler.java:83
9)
at javax.activation.DataHandler.writeTo(DataHandler.java:295)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1248)
at javax.mail.internet.MimeMessage.writeTo(MimeMessage.java:1673)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:555)
... 6 more
Cant send mail. IOException while sending message -
Sending emails with attachments through outlook 2003
Hello,
I have recently switch from cablevison to Fios. With Cablevison, I never had a problem with email. However, now I am having problems sending emails with attachments using outlook 2003. I have called Verizon and we troubleshooted the problem and they feel this is a Microsoft problem.
I can send email's without attachments through outlook and verizon.net, but I can't send emails with attachments through outlook, I can send them though verizon.net. All my settings are correct for sending and receiving email.
I called Microsoft and they say it a Verizon problem...
HELP, does anyone have a solution?????
Thanks
Len628Which antivirus software do you run on your computer? Are there any errors posting? Have you shut off any email firewalls temporarily to attempt to isolate your issue? Do you have outlook 2003 on more than 1 pc in your home? Have your tried to attach a small text file and send it to see if that goes thru successfully?
Joe D
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.Follow us on Twitter™! -
Is it possible to send emails with attachments fro...
Hi there,
I was wondering whether it's possible to send emails with attachments from a Nokia 5230, it's just I would like to be able to send emails with attachments without using a computer especially when I'm out on my journeys.
Many thanks,
Tim Auluck
Solved!
Go to Solution.Hi RocknRollTim,
Thanks for your reply. Have you already tried sending these files? Though you're not able to create all these files on the phone itself, you should be able to send them in an attachment when they're on your memory card.
Uploading a .jpg, .tiff, .gif, .doc, .docx .htm, .html .key, .numbers, .pages, .pdf, .ppt, .pptx, .txt, .rtf, .vcf, .xls or .xlsx file shouldn't be a problem when uploading. Just click on 'Other' when adding an attachment, then on 'Other files' and there you will be able to select any file that you have saved on your memory card.
Whether you can actually send the email depends on the strength of your internet connection (as I mentioned in my previous post). Also keep in mind that the phone itself as well as the network work with a maximum size file that you can send over 3G (more information about this can be found here), and can therfore also limit you in sending large files.
In any case, let me know how you get on so that we can assist further where necessary.
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too. -
How to send Email with attachments
Hi im Trying to send a file as attachment using EMail Activity operator.
Can we do it using Email activity? If yes, then how can we do it? If no, then please tell me about any other method using which i can send a email with attachments.
Regards
VibhutiBetter late than never, a comprehensive demo on the topic:
REM
REM maildemo.sql - A PL/SQL package to demonstrate how to use the UTL_SMTP
REM package to send emails in ASCII and non-ASCII character sets, emails
REM with text or binary attachments.
REM
REM Note: this package relies on the UTL_ENCODE PL/SQL package in Oracle 9i.
CREATE OR REPLACE PACKAGE demo_mail IS
----------------------- Customizable Section -----------------------
-- Customize the SMTP host, port and your domain name below.
smtp_host VARCHAR2(256) := 'smtp-server.some-company.com';
smtp_port PLS_INTEGER := 25;
smtp_domain VARCHAR2(256) := 'some-company.com';
-- Customize the signature that will appear in the email's MIME header.
-- Useful for versioning.
MAILER_ID CONSTANT VARCHAR2(256) := 'Mailer by Oracle UTL_SMTP';
--------------------- End Customizable Section ---------------------
-- A unique string that demarcates boundaries of parts in a multi-part email
-- The string should not appear inside the body of any part of the email.
-- Customize this if needed or generate this randomly dynamically.
BOUNDARY CONSTANT VARCHAR2(256) := '-----7D81B75CCC90D2974F7A1CBD';
FIRST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || utl_tcp.CRLF;
LAST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || '--' ||
utl_tcp.CRLF;
-- A MIME type that denotes multi-part email (MIME) messages.
MULTIPART_MIME_TYPE CONSTANT VARCHAR2(256) := 'multipart/mixed; boundary="'||
BOUNDARY || '"';
MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER := 76 / 4 * 3;
-- A simple email API for sending email in plain text in a single call.
-- The format of an email address is one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
-- The recipients is a list of email addresses separated by
-- either a "," or a ";"
PROCEDURE mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
message IN VARCHAR2);
-- Extended email API to send email in HTML or plain text with no size limit.
-- First, begin the email by begin_mail(). Then, call write_text() repeatedly
-- to send email in ASCII piece-by-piece. Or, call write_mb_text() to send
-- email in non-ASCII or multi-byte character set. End the email with
-- end_mail().
FUNCTION begin_mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL)
RETURN utl_smtp.connection;
-- Write email body in ASCII
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2);
-- Write email body in non-ASCII (including multi-byte). The email body
-- will be sent in the database character set.
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2);
-- Write email body in binary
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
message IN RAW);
-- APIs to send email with attachments. Attachments are sent by sending
-- emails in "multipart/mixed" MIME format. Specify that MIME format when
-- beginning an email with begin_mail().
-- Send a single text attachment.
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
data IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE);
-- Send a binary attachment. The attachment will be encoded in Base-64
-- encoding format.
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
data IN RAW,
mime_type IN VARCHAR2 DEFAULT 'application/octet',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE);
-- Send an attachment with no size limit. First, begin the attachment
-- with begin_attachment(). Then, call write_text repeatedly to send
-- the attachment piece-by-piece. If the attachment is text-based but
-- in non-ASCII or multi-byte character set, use write_mb_text() instead.
-- To send binary attachment, the binary content should first be
-- encoded in Base-64 encoding format using the demo package for 8i,
-- or the native one in 9i. End the attachment with end_attachment.
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
transfer_enc IN VARCHAR2 DEFAULT NULL);
-- End the attachment.
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE);
-- End the email.
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection);
-- Extended email API to send multiple emails in a session for better
-- performance. First, begin an email session with begin_session.
-- Then, begin each email with a session by calling begin_mail_in_session
-- instead of begin_mail. End the email with end_mail_in_session instead
-- of end_mail. End the email session by end_session.
FUNCTION begin_session RETURN utl_smtp.connection;
-- Begin an email in a session.
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL);
-- End an email in a session.
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection);
-- End an email session.
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection);
END;
CREATE OR REPLACE PACKAGE BODY demo_mail IS
-- Return the next email address in the list of email addresses, separated
-- by either a "," or a ";". The format of mailbox may be in one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
FUNCTION get_address(addr_list IN OUT VARCHAR2) RETURN VARCHAR2 IS
addr VARCHAR2(256);
i pls_integer;
FUNCTION lookup_unquoted_char(str IN VARCHAR2,
chrs IN VARCHAR2) RETURN pls_integer AS
c VARCHAR2(5);
i pls_integer;
len pls_integer;
inside_quote BOOLEAN;
BEGIN
inside_quote := false;
i := 1;
len := length(str);
WHILE (i <= len) LOOP
c := substr(str, i, 1);
IF (inside_quote) THEN
IF (c = '"') THEN
inside_quote := false;
ELSIF (c = '\') THEN
i := i + 1; -- Skip the quote character
END IF;
GOTO next_char;
END IF;
IF (c = '"') THEN
inside_quote := true;
GOTO next_char;
END IF;
IF (instr(chrs, c) >= 1) THEN
RETURN i;
END IF;
<<next_char>>
i := i + 1;
END LOOP;
RETURN 0;
END;
BEGIN
addr_list := ltrim(addr_list);
i := lookup_unquoted_char(addr_list, ',;');
IF (i >= 1) THEN
addr := substr(addr_list, 1, i - 1);
addr_list := substr(addr_list, i + 1);
ELSE
addr := addr_list;
addr_list := '';
END IF;
i := lookup_unquoted_char(addr, '<');
IF (i >= 1) THEN
addr := substr(addr, i + 1);
i := instr(addr, '>');
IF (i >= 1) THEN
addr := substr(addr, 1, i - 1);
END IF;
END IF;
RETURN addr;
END;
-- Write a MIME header
PROCEDURE write_mime_header(conn IN OUT NOCOPY utl_smtp.connection,
name IN VARCHAR2,
value IN VARCHAR2) IS
BEGIN
utl_smtp.write_data(conn, name || ': ' || value || utl_tcp.CRLF);
END;
-- Mark a message-part boundary. Set <last> to TRUE for the last boundary.
PROCEDURE write_boundary(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE) AS
BEGIN
IF (last) THEN
utl_smtp.write_data(conn, LAST_BOUNDARY);
ELSE
utl_smtp.write_data(conn, FIRST_BOUNDARY);
END IF;
END;
PROCEDURE mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
message IN VARCHAR2) IS
conn utl_smtp.connection;
BEGIN
conn := begin_mail(sender, recipients, subject);
write_text(conn, message);
end_mail(conn);
END;
FUNCTION begin_mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL)
RETURN utl_smtp.connection IS
conn utl_smtp.connection;
BEGIN
conn := begin_session;
begin_mail_in_session(conn, sender, recipients, subject, mime_type,
priority);
RETURN conn;
END;
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2) IS
BEGIN
utl_smtp.write_data(conn, message);
END;
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2) IS
BEGIN
utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
END;
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
message IN RAW) IS
BEGIN
utl_smtp.write_raw_data(conn, message);
END;
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
data IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
begin_attachment(conn, mime_type, inline, filename);
write_text(conn, data);
end_attachment(conn, last);
END;
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
data IN RAW,
mime_type IN VARCHAR2 DEFAULT 'application/octet',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE) IS
i PLS_INTEGER;
len PLS_INTEGER;
BEGIN
begin_attachment(conn, mime_type, inline, filename, 'base64');
-- Split the Base64-encoded attachment into multiple lines
i := 1;
len := utl_raw.length(data);
WHILE (i < len) LOOP
IF (i + MAX_BASE64_LINE_WIDTH < len) THEN
utl_smtp.write_raw_data(conn,
utl_encode.base64_encode(utl_raw.substr(data, i,
MAX_BASE64_LINE_WIDTH)));
ELSE
utl_smtp.write_raw_data(conn,
utl_encode.base64_encode(utl_raw.substr(data, i)));
END IF;
utl_smtp.write_data(conn, utl_tcp.CRLF);
i := i + MAX_BASE64_LINE_WIDTH;
END LOOP;
end_attachment(conn, last);
END;
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
transfer_enc IN VARCHAR2 DEFAULT NULL) IS
BEGIN
write_boundary(conn);
write_mime_header(conn, 'Content-Type', mime_type);
IF (filename IS NOT NULL) THEN
IF (inline) THEN
write_mime_header(conn, 'Content-Disposition',
'inline; filename="'||filename||'"');
ELSE
write_mime_header(conn, 'Content-Disposition',
'attachment; filename="'||filename||'"');
END IF;
END IF;
IF (transfer_enc IS NOT NULL) THEN
write_mime_header(conn, 'Content-Transfer-Encoding', transfer_enc);
END IF;
utl_smtp.write_data(conn, utl_tcp.CRLF);
END;
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
utl_smtp.write_data(conn, utl_tcp.CRLF);
IF (last) THEN
write_boundary(conn, last);
END IF;
END;
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
end_mail_in_session(conn);
end_session(conn);
END;
FUNCTION begin_session RETURN utl_smtp.connection IS
conn utl_smtp.connection;
BEGIN
-- open SMTP connection
conn := utl_smtp.open_connection(smtp_host, smtp_port);
utl_smtp.helo(conn, smtp_domain);
RETURN conn;
END;
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL) IS
my_recipients VARCHAR2(32767) := recipients;
my_sender VARCHAR2(32767) := sender;
BEGIN
-- Specify sender's address (our server allows bogus address
-- as long as it is a full email address ([email protected]).
utl_smtp.mail(conn, get_address(my_sender));
-- Specify recipient(s) of the email.
WHILE (my_recipients IS NOT NULL) LOOP
utl_smtp.rcpt(conn, get_address(my_recipients));
END LOOP;
-- Start body of email
utl_smtp.open_data(conn);
-- Set "From" MIME header
write_mime_header(conn, 'From', sender);
-- Set "To" MIME header
write_mime_header(conn, 'To', recipients);
-- Set "Subject" MIME header
write_mime_header(conn, 'Subject', subject);
-- Set "Content-Type" MIME header
write_mime_header(conn, 'Content-Type', mime_type);
-- Set "X-Mailer" MIME header
write_mime_header(conn, 'X-Mailer', MAILER_ID);
-- Set priority:
-- High Normal Low
-- 1 2 3 4 5
IF (priority IS NOT NULL) THEN
write_mime_header(conn, 'X-Priority', priority);
END IF;
-- Send an empty line to denotes end of MIME headers and
-- beginning of message body.
utl_smtp.write_data(conn, utl_tcp.CRLF);
IF (mime_type LIKE 'multipart/mixed%') THEN
write_text(conn, 'This is a multi-part message in MIME format.' ||
utl_tcp.crlf);
END IF;
END;
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
utl_smtp.close_data(conn);
END;
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
utl_smtp.quit(conn);
END;
END;
/ -
Send emails with attachments residing in the network
Hi All,
My requirement is to send email with attachments. I am using javamail and it works fine only if the attachment resides in the local machine.
If the attachment resides in the network [the folder is shared by the user], the application gives me IOException.
Please help. Let me know if I am not clear.Please find the trace below . Also I am able to browse the share but haven't tried writing a test app.
javax.mail.MessagingException: IOException while sending message
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:595)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at SendEmail.sendMail(SendEmail.java:66)
at FetchDetails.fetchResultSet(FetchDetails.java:69)
at FetchDetails.<init>(FetchDetails.java:36)
at Index.main(Index.java:3)
Caused by: java.io.FileNotFoundException: \xxx.xxx.xx.xxx\dinesh\dialog.gif (The
system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:103)
at javax.activation.FileDataSource.getInputStream(FileDataSource.java:80
at javax.activation.DataHandler.writeTo(DataHandler.java:287)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1248)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:747)
at javax.mail.internet.MimeMultipart.writeTo(MimeMultipart.java:361)
at com.sun.mail.handlers.multipart_mixed.writeTo(multipart_mixed.java:85
at javax.activation.ObjectDataContentHandler.writeTo(DataHandler.java:83
9)
at javax.activation.DataHandler.writeTo(DataHandler.java:295)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1248)
at javax.mail.internet.MimeMessage.writeTo(MimeMessage.java:1673)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:555)
... 6 more
Cant send mail. IOException while sending message -
Procedure for Sending Emails with Attachments
Hi All,
Q1. We wish to write a PROCEDURE that sends emails with attachments in SQL. Can someone please suggest the procedure code for the same?
Q2. Apart from DBMS_JOB utlity can any other this procedure be scheduled to send automatic emails picking up files from a remote filer randomly.
Regards,
Chinmayhttp://www.lv2000.com/articles/utlsmtp.htm
I do not understand what the article is trying to say when it says this:
<quote>
1. You cannot send a Subject line with your email.
2. You cannot add attachments to your message.
Hopefully, these two deficiencies will be rectified in future releases!
</quote>
The entire email sending code with attachments is freely available from Oracle (sitting on top of utl_smtp package). No need to buy additional software. -
Problems sending email with attachments
This is a long story. We use a satellite connection at home and in our motorhome most of the time. We use our air card (USB 760) for special needs and when we are travelling without our motorhome.
The past two weekends I have had to use the aircard. During that use I prepared some email with various sized attachments (max 1.2 meg). On the first weekend the email with attachments would not send (Eudora/POP3/Godaddy). Then I tried a different ISP I have to use for a special assignment (Eudora/POP3/Bellweather.net) and it went through.
When I got back to the house, I contacted Godaddy and they did not find anything in their system that would cause a problem. During the testing with them, the email with attachments went through just fine (on satellite). I laid it off to a Godaddy problem.
This past weekend, I prepared another email with a small attachment and it would not send via either ISP. Then I connected to the motel wireless and it went just fine via Godaddy.
So, all of the testing points to a problem with my Verizon connection. I have checked and I have the latest software. The Verizon tech folks have evelated it to see if they can figure out what is going on.
Anyone else have the same problem? Any thoughts on what the problem might be?
Jim Shepherd
three zero three 478 thirty five zero one.Message attachments are allowed in Hosted VZEmail Services using your USB 760 air card. However, to enhance security some attachment types will be blocked and cannot be sent.
The blocked attachment types include, but are not limited to, the following:
.exe
.bat
.pif
.msi
.vbs
.com
Thank you, LatachaM_VZW -
Email not in sent box when I send email with attachments in Word.
Several times, I've noticed that when I send an email with attachments in Word = .doc format, I don't find the emails in my Sent Box…Why?
Then this sounds like a problem at the receiving end. More information is needed.
-
Functionality to send email with attachments.(all types ot attachments)
Hi experts,
I have an requirement to modify the existing workflow to include the new part/functionality to send the email with attachments.
I mean, the existing workflow is sending only the notification as of now, the new requirement was i need to add the new functionalaity such a way the email functionality needs to be enabled so that the receiver who is receiving the notification will also get the email as well along with the attachments.
Note* Attachment could be of any types like pdf,tex,word etc...
Please suggest will it be possible to achieve this functionalites?
Any sample code will be a great help for me.
Thanks in advance,
Thiru.You can send attachments in email notification by defining message attributes of type document. Oracle Workflow supports document types called "PL/SQL" documents, "PL/SQL CLOB" documents, and "PL/SQL BLOB" documents.
You can go through the below document for defining documents.
http://www-apps.us.oracle.com/wf/doc/wfr1213/wfdg/html/T361836T362168.htm#2807860 -
Hi, I like to buy an IPad, but a friend of mine has one and he cannot send emails with differtent attachments. It is only possible, to take a picture for example, and send it as a mail. Is there another software? or wat to do?
There is the GoodReader app (http://itunes.apple.com/us/app/goodreader-for-ipad/id363448914?mt=8#) which supports a number of different file formats (there may be other apps but GoodReader is the one that I've got) :
GoodReader not only supports massive PDF and TXT files, but also handles the most popular file types:
• MS Office - .doc, .ppt., .xls
• iWork ’08/’09
• HTML and Safari webarchives
• High resolution images
• Even audio and video!
Depending on the apps where you are working on the document, you could then copy them (if the document's 'owning' app supports it) into GoodReader (or you could just store them in GoodReader anyway), and then select and send multiple file types from within the app as attachments to an email. -
Send email with attachments from oracle procedure
This is my procedure
CREATE OR REPLACE PROCEDURE send_parvo_email IS
v_header varchar2(200);
v_file UTL_FILE.FILE_TYPE;
v_count Number;
v_letter Varchar(50);
req UTL_HTTP.REQ;
req1 UTL_HTTP.REQ;
resp UTL_HTTP.RESP;
resp1 UTL_HTTP.RESP;
url VARCHAR2 (2000);
url1 VARCHAR2 (2000);
val varchar2(4000);
val1 varchar2(4000);
p_start_date DATE;
p_end_date DATE;
v_shipment_id varchar2(30);
--v_start_date DATE;
--v_end_date DATE;
Cursor C1 is select shipment_id
from ship_hdr
where trunc(create_time) = trunc(sysdate);
BEGIN
v_letter := 'r_parvo_b19_rpt';
select trunc(sysdate-7),trunc(sysdate-2)
into p_start_date,p_end_date
from dual;
Open C1;
Fetch C1 into v_shipment_id;
Close C1;
save_parvo_email;
UTL_HTTP.SET_PROXY (null,null);
url :=
utl_url.ESCAPE
( 'http://hbc-maroon.heartlandbc.org/reports/rwservlet?userid=test/[email protected]&subject="Parvo Testing Report"&destype=mail&FROM=[email protected]&desname=[email protected]&desformat=PDF&ENVID=QA&report='||v_letter||'&start_date='||p_start_date||'&end_date='||p_end_date);
req := UTL_HTTP.BEGIN_REQUEST (url);
UTL_HTTP.SET_HEADER (req, 'User-Agent', 'Mozilla/4.0 Oracle');
resp := UTL_HTTP.GET_RESPONSE (req);
UTL_HTTP.READ_LINE (resp, val, TRUE);
UTL_HTTP.END_RESPONSE (resp);
Update ship_dtl
set shipment_printed = 'Y'
where shipment_printed is null
and trunc(coll_date) between p_start_date and p_end_date;
commit;
END;
This works fine and sends email with the report as attachment. The attachment is report_name.pdf. I want to change this attachment to be named as shipment_id.pdf. Is this possible and how?
If there is any other method to sent email with attachments . ie run the report and attach the report to the email not as report_name.rdf but shipmenmt_id.rdfThis is my procedure
CREATE OR REPLACE PROCEDURE send_parvo_email IS
v_header varchar2(200);
v_file UTL_FILE.FILE_TYPE;
v_count Number;
v_letter Varchar(50);
req UTL_HTTP.REQ;
req1 UTL_HTTP.REQ;
resp UTL_HTTP.RESP;
resp1 UTL_HTTP.RESP;
url VARCHAR2 (2000);
url1 VARCHAR2 (2000);
val varchar2(4000);
val1 varchar2(4000);
p_start_date DATE;
p_end_date DATE;
v_shipment_id varchar2(30);
--v_start_date DATE;
--v_end_date DATE;
Cursor C1 is select shipment_id
from ship_hdr
where trunc(create_time) = trunc(sysdate);
BEGIN
v_letter := 'r_parvo_b19_rpt';
select trunc(sysdate-7),trunc(sysdate-2)
into p_start_date,p_end_date
from dual;
Open C1;
Fetch C1 into v_shipment_id;
Close C1;
save_parvo_email;
UTL_HTTP.SET_PROXY (null,null);
url :=
utl_url.ESCAPE
( 'http://hbc-maroon.heartlandbc.org/reports/rwservlet?userid=test/[email protected]&subject="Parvo Testing Report"&destype=mail&[email protected]&[email protected]&desformat=PDF&ENVID=QA&report='||v_letter||'&start_date='||p_start_date||'&end_date='||p_end_date);
req := UTL_HTTP.BEGIN_REQUEST (url);
UTL_HTTP.SET_HEADER (req, 'User-Agent', 'Mozilla/4.0 Oracle');
resp := UTL_HTTP.GET_RESPONSE (req);
UTL_HTTP.READ_LINE (resp, val, TRUE);
UTL_HTTP.END_RESPONSE (resp);
Update ship_dtl
set shipment_printed = 'Y'
where shipment_printed is null
and trunc(coll_date) between p_start_date and p_end_date;
commit;
END;
This works fine and sends email with the report as attachment. The attachment is report_name.pdf. I want to change this attachment to be named as shipment_id.pdf. Is this possible and how?
If there is any other method to sent email with attachments . ie run the report and attach the report to the email not as report_name.rdf but shipmenmt_id.rdf -
I recently updated my safari to version 6. After having updates, I found out that I cant send emails with attachment. This is only with my Yahoo Account. I used my Yahoo Account more often than my other emails, can someone help me fix this?
Thanks.frannbug wrote:
Well, I copied and pasted it into a message to Apple's feedback; but I'd still be interested in hearing how others may have found work-arounds to the problems I've described here.
You may wish to post a more concise description of what you are asking. -
Sending Emails with Attachments greater than 255 chars in 4.6C
Hi,
I have a requirement in which i have to send mails with attachments greater than 255 characters. The attachment would be a tab-delimited .TXT file. Since i am working on 4.6C, i don't have the luxury of using the FM 'SCMS_STRING_TO_FTEXT'.
It's very urgent. So any help in this regards would be greatly appreciated.
Thank you.
BalajiHi,
Internal table to be passed to SOLIST1 type int, table and then compress this table using fm "table_compress" with the compressed table then call fm "table_decompress" and pass this to function module SO_NEW_DOCUMENT_ATT_SEND_API1.
Keep in mind the following variable
i_packing_list-transf_bin = 'X'.
aRs
Maybe you are looking for
-
Home Sharing doesn't work on my iMac (2013)
Hi, I have an iMac 2013, all my music and movies are on it. Home Sharing is enabled. I have the iMac, an iPhone, an iPad and an Apple TV all on the same network, sponsored by a Time Capsule. None of the 3 devices can connect to the iMac library. The
-
Urgent help needed in Java Strings
Hi guys/gals.. I want to know how to i Capitalize onlt the first Alphabet of a String. Eg if i hav the string "swing". i need it as "Swing" ie the first alpha shud be capitalized. How to do tat. The Java method of toUpperCase wud be of now use since
-
How do I join clips in iMovie 10.0?
I imported two different clips into one event and when I share/save it, only one of the clips exports out. :/ Please help!
-
My keyboard moved to middle of page and is split. How do I get it back to bottom of page?
-
Case number from the service order number
Hi, I am doing a report where in when the user enters a service order number <b>or</b> case number (both are optional )the result list that he gets would include both case number <b>and</b> the service order number(of the service and case documents).